Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DENSITY OF STATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Ground state rotational and kinetic temperatures of C 2 molecules in a laser-produced plasma

This study presents an experimental comparison between rotational and kinetic temperatures of molecular species in a laser-produced plasma, utilizing tunable laser absorption spectroscopy. We analyzed high-resolution and time-resolved absorption spectra of 31 rotational transitions within the Phillips A 1 II u –X 1 Σ g 3-0 band of the C 2 molecule, measured from a laser-produced graphite plasma in ~2 Torr argon, within the 771–781 nm spectral range. Spectral fitting provided quantitative state column densities of C 2 rotational energy levels in the ground electronic and vibrational states. Boltzmann analysis revealed thermalized rotational distributions showing rotational temperatures decreasing from 3000 to 600 K within 5–500 μs following the onset of the laser plasma. The measured kinetic and rotational temperatures of C 2 molecules are comparable, suggesting that collisional processes in the laser-produced plasma are sufficient to maintain thermal equilibrium between the C 2 molecules and the Ar background gas.

Absorption spectroscopy↗
DOE OSTI2024

Pressure-Induced Exciton Formation and Superconductivity in Platinum-Based Mineral Sperrylite

We report a comprehensive study of Sperrylite (PtAs 2 ), the main platinum source in natural minerals, as a function of applied pressures up to 150 GPa. While no structural phase transition is detected from pressure-dependent X-ray measurements, the unit cell volume shrinks monotonically with pressure following the third-order Birch–Murnaghan equation of state. The mildly semiconducting behavior found in pure synthesized crystals at ambient pressures becomes more insulating upon increasing the applied pressure before metalizing at higher pressures, giving way to the appearance of an abrupt decrease in resistance near 3 K at pressures above 92 GPa consistent with the onset of a superconducing phase. The pressure evolution of the calculated electronic band structure reveals the same physical trend as our transport measurements, with a non-monotonic evolution explained by a hole band that is pushed below the Fermi energy and an electron band that approaches it as a function of pressure, both reaching a touching point suggestive of an excitonic state. A Lifshitz transition of the electronic structure and an increase in the density of states may naturally explain the onset of superconductivity in this material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Probing the van Hove singularity of the kagome metal YV 6 Sn 6 through quantum oscillations

Kagome metals with the Fermi energy tuned near the van Hove singularities (vHss) have shown to host exotic phases including unconventional superconductivity and a chiral flux phase arising from a charge density wave. However, most quantum oscillations studies of the electronic structure of kagome metals focus on compounds which electronically or magnetically order, obscuring the unperturbed vHs. Here we present quantum oscillation measurements of YV 6 ⁢Sn 6 which contains a pristine kagome lattice free from long-range order. We discovered quantum oscillations corresponding to a large orbit (≈70% of the Brillouin Zone area) with the heaviest mass ever observed in vanadium-based kagome metals (≈3.3⁢m e ), consistent with a Fermi pocket whose Fermi level is near the vHs. Comparing with first-principle calculations suggests that the effective mass of this pocket is highly sensitive to the position of Fermi level. Finally, our study establishes the enhanced density of states associated with a vHs in a kagome metal, allowing further insight into a potential driving mechanism for the unconventional electronic orderings in this class of materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Competition between magnetic order and charge localization in Na 2 IrO 3 thin crystal devices thin crystal devices

Spin orbit assisted Mott insulators such as sodium iridate (Na 2 IrO 3 ) have been an important subject of study in recent years. In these materials, the interplay of electronic correlations, spin-orbit coupling, crystal field effects, and a honeycomb arrangement of ions bring exciting ground states, predicted in the frame of the Kitaev model. The insulating character of Na 2 IrO 3 has hampered its integration to an electronic device, desirable for applications, such as the manipulation of quasiparticles interesting for topological quantum computing. Here we show through electronic transport measurements supported by angle-resolved photoemission spectroscopy (ARPES) experiments, that electronic transport in Na 2 IrO 3 is ruled by variable range hopping and it is strongly dependent on the magnetic ordering transition known for bulk Na 2 IrO 3 , as well as on external electric fields. Furthermore, electronic transport measurements allow us to deduce a value for the localization length and the density of states in our Na 2 IrO 3 thin crystal devices, and offer an alternative approach to study insulating 2D-materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Role of phonon softening induced by anisotropic fluctuations in the enhanced mobility at free glassy surfaces

The surface of a glassy material exhibits enhanced mobility compared to the bulk counterpart, however the underlying mechanism for this remains elusive. Herein, we present studies of the dynamical properties of a prototypical glass-forming metallic liquid Zr 50 Cu 50 as a function of the distance from both the free surface and pinned surface using molecular dynamics simulations. We found that the surface mobility increases gradually on approaching the free surface, with a concomitant increase of the non-Gaussianity. The phonon density of states at the free surface exhibits lower characteristic frequencies than in the bulk and pinned surface. These findings suggest phonon softening caused by anisotropic fluctuations at free surfaces as an alternative physical mechanism leading to the enhanced dynamics at free glassy surfaces from the perspective of collective excitations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Statistical inference of collision frequencies from x-ray Thomson scattering spectra

Thomson scattering spectra measure the response of plasma particles to incident radiation. In warm dense matter, which is opaque to visible light, x-ray Thomson scattering (XRTS) enables a detailed probe of the electron distribution and has been used as a diagnostic for electron temperature, density, and plasma ionization. In this work, we examine the sensitivities of inelastic XRTS signatures to modeling details, including the dynamic collision frequency and the electronic density of states. Applying verified Monte Carlo inversion methods to dynamic structure factors obtained from time-dependent density functional theory, we assess the utility of XRTS signals as a way to inform the dynamic collision frequency, especially its direct-current limit, which is directly related to the electrical conductivity.

Collision frequency↗
DOE OSTI2022

Evaluation of Thermal Neutron Scattering Law and Cross Sections for Calcium Hydride

Presented in this paper are the calculated thermal scattering law (TSL) and thermal neutron scattering cross sections for Calcium Hydride, hereafter referred to by its chemical symbol CaH 2 . The only other such data prior to this evaluation are thermal neutron scattering libraries in the JEFF database, which suffer from nonphysical features and inaccuracies. The data in this evaluation are calculated from first principles; Density Functional Theory (DFT) is used to calculate the phonon density of states (DOS), which is the primary input required to calculate the TSL. The TSL and cross sections have been evaluated for the three non-equivalent atom cites in the CaH 2: Ca, H 1 , and H 2 . Each evaluation has been submitted to the NNDC for consideration in the next ENDF/B release.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Materials representation and transfer learning for multi-property prediction

The adoption of machine learning in materials science has rapidly transformed materials property prediction. Hurdles limiting full capitalization of recent advancements in machine learning include the limited development of methods to learn the underlying interactions of multiple elements as well as the relationships among multiple properties to facilitate property prediction in new composition spaces. To address these issues, we introduce the Hierarchical Correlation Learning for Multi-property Prediction (H-CLMP) framework that seamlessly integrates: (i) prediction using only a material's composition, (ii) learning and exploitation of correlations among target properties in multi-target regression, and (iii) leveraging training data from tangential domains via generative transfer learning. The model is demonstrated for prediction of spectral optical absorption of complex metal oxides spanning 69 three-cation metal oxide composition spaces. H-CLMP accurately predicts non-linear composition-property relationships in composition spaces for which no training data are available, which broadens the purview of machine learning to the discovery of materials with exceptional properties. This achievement results from the principled integration of latent embedding learning, property correlation learning, generative transfer learning, and attention models. The best performance is obtained using H-CLMP with transfer learning [H-CLMP(T)] wherein a generative adversarial network is trained on computational density of states data and deployed in the target domain to augment prediction of optical absorption from composition. H-CLMP(T) aggregates multiple knowledge sources with a framework that is well suited for multi-target regression across the physical sciences.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Sharp spectroscopic fingerprints of disorder in an incompressible magnetic state

Disorder significantly impacts the electronic properties of conducting quantum materials by inducing electron localization and thus altering the local density of states and electric transport. In insulating quantum magnetic materials, the effects of disorder are less understood and can drastically impact fluctuating spin states like quantum spin liquids. In the absence of transport tools, disorder is typically characterized using chemical methods or by semi-classical modeling of spin dynamics. This requires high magnetic fields that may not always be accessible. Here, we show that magnetization plateaus—incompressible states found in many quantum magnets—provide an exquisite platform to uncover small amounts of disorder, regardless of the origin of the plateau. Using optical magneto-spectroscopy on the Ising-Heisenberg triangular-lattice antiferromagnet K 2 Co(SeO 3 ) 2 exhibiting a 1/3 magnetization plateau, we identify sharp spectroscopic lines, the fine structure of which serves as a hallmark signature of disorder. Through analytical and numerical modeling, we show that these fingerprints not only enable us to quantify minute amounts of disorder but also reveal its nature—as dilute vacancies. Remarkably, this model explains all details of the thermomagnetic response of our system, including the existence of multiple plateaus. Our findings provide a new approach to identifying disorder in quantum magnets.

Infrared spectroscopy↗
DOE OSTI2022

Itinerant G-type antiferromagnet SrCr 2 As 2 studied by magnetization, heat capacity, electrical resistivity, and NMR measurements

Here, the physical properties of itinerant antiferromagnetic (AFM) SrCr 2 As 2 with body-centered tetragonal ThCr 2 Si 2 structure were investigated in single crystalline and polycrystalline forms by electrical resistivity ρ, heat capacity C p , magnetic susceptibility χ versus temperature T, and magnetization M versus applied magnetic field H isotherm measurements as well as 75 As and 53 Cr nuclear magnetic resonance (NMR) measurements in the wide temperature range T = 1.6–900 K. From the χ(T) and 75 As NMR measurements, the G-type AFM state below T N = 615(15) K has been determined, consistent with the previous neutron-diffraction measurements. Direct evidence of magnetic ordering of the Cr spins was shown by the observation of the 53 Cr NMR spectrum under H = 0. From the χ( T) measurements on single-crystal SrCr 2 As 2 under the two different magnetic field directions H|| ab and H || c in the AFM state, the Cr ordered moments are shown to align along the c axis in the G-type AFM state. The metallic state is directly evidenced by the ρ, C p , and NMR measurements, and the density of states at the Fermi energy $\mathscr{D}$(E F ) in the AFM state is estimated to be 7.53 states/eV f.u. for both spin directions which is almost twice the bare $\mathscr{D}$(E F ) estimated from first-principles calculations, suggesting an enhancement of the conduction-carrier mass by a factor of two in the AFM state. The $\mathscr{D}$(E F ) is found to be nearly constant below at least 100 K and is independent of H. The ρ(T) is found to show T-linear behavior above T N and exhibits positive curvature below T N where significant loss of spin-disorder scattering upon magnetic ordering is observed. The resistivity anisotropy of the compound remains moderate ρ c /ρ a ~ 9 through most of the magnetically ordered phase but shows a rapid increase below 50 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Computational search for itinerant n -type and p -type magnetic semiconductors: Arsenopyrites as bipolar magnetic semiconductors

We report a computational search for three-dimensional bulk ferromagnetic semiconductors based on itinerant Stoner physics. Stoner-based ferromagnetic semiconductors require an unusual combination of high band edge density of states and moderate transport effective mass. Nonetheless, several potential materials are found. Here, we identify arsenopyrites, exemplified by FeAsS, as materials that, with suitable doping, exhibit ferromagnetic semiconducting behavior for both n- and p-type dopants. The existence of a material that becomes ferromagnetic for both p and n types may enable device concepts, for example, ferromagnetic p–n junction devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Increased Voltage in CdSe Solar Cells by Mitigation of Charge Carrier Trapping Due to Se Vacancies

Cadmium selenide (CdSe), with a 1.7 eV bandgap, is a promising high-bandgap semiconductor for tandem solar cells, yet device efficiencies are hindered by rapid minority carrier recombination. Here, in this study, polycrystalline CdSe solar cells are investigated using radiative emission spectroscopy, time-resolved photoluminescence, and density functional theory, revealing fast (sub-nanosecond) minority carrier trapping by selenium vacancy-related defect states with densities of (5–50) × 10 17 cm −3 , limiting carrier mobility and increasing recombination. By reducing absorber thickness to ≈0.5 µm, trapping effects are mitigated, achieving a record open-circuit voltage of 917 mV, a 165 mV improvement over prior reports. These findings clarify the role of Se vacancies in limiting CdSe solar cell performance and provide insights applicable to CdSe and CdSeTe thin-film photovoltaics. This work advances understanding of defect-mediated losses in II–VI semiconductors and suggests pathways for improving solar cell performance through defect control.

14 SOLAR ENERGY↗
DOE OSTI2023

Electronic structure of boron and aluminum δ -doped layers in silicon

Recent work on atomic-precision dopant incorporation technologies has led to the creation of both boron and aluminum δ-doped layers in silicon with densities above the solid solubility limit. For this study, we use density functional theory to predict the band structure and effective mass values of such δ layers, first modeling them as ordered supercells. Structural relaxation is found to have a significant impact on the impurity band energies and effective masses of the boron layers, but not the aluminum layers. However, disorder in the δ layers is found to lead to a significant flattening of the bands in both cases. We calculate the local density of states and doping potential for these δ-doped layers, demonstrating that their influence is highly localized with spatial extents at most 4 nm. We conclude that acceptor δ-doped layers exhibit different electronic structure features dependent on both the dopant atom and spatial ordering. This suggests prospects for controlling the electronic properties of these layers if the local details of the incorporation chemistry can be fine-tuned.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Excess heat capacity in magnetically ordered Ce heavy-fermion metals

Herein we study the magnetic heat capacity of a series of magnetically ordered Ce-based heavy-fermion materials, which show an anomalous T 3 heat capacity in excess of the phonon contribution in many materials. For compounds for which magnon models have been worked out, we show that the local-moment magnon heat capacity derived from the measured magnon spectra underestimates the experimental specific heat. The excess heat capacity reveals increasing density of states with increasing energy, akin to a pseudogap. We show that this anomalous temperature-dependent term is not associated with proximity to a quantum critical point, but is strongly correlated with T N , indicating the anomalous excitations are governed by the magnetic exchange interaction. This insight may hold key information for understanding magnetically ordered heavy fermions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Compositionally Complex Alloys: Some Insights from Photoemission Spectroscopy

Photoemission spectroscopy (PES) is an underrepresented part of current and past studies of compositionally complex alloys (CCA) such as high-entropy alloys (HEA) and their derivatives. PES studies are very important for understanding the electronic structure of materials, and are therefore essential in some cases for a correct description of the intrinsic properties of CCAs. Here, we present several examples showing the importance of PES. First, we show how the difference between the split-band structure and the common-band structure of the valence band (VB), observed by PES, can explain a range of properties of CCAs and alloys in general. A simple description of the band crossing in CCAs composed from the early and late transition metals showing a split band is discussed. We also demonstrate how a high-accuracy PES study can determine the variation in the density of states at the Fermi level as a function of Cu content in Ti-Zr-Nb-Ni-Cu metallic glasses. Finally, the first results of an attempt to single out the contributions of particular constituents in Cantor-type alloys to their VBs are presented. The basic principles of PES, the techniques employed in studies presented, and some issues associated with PES measurements are also described.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electromagnetic Properties of Aluminum-based Bilayers for Kinetic Inductance Detectors

The complex conductivity of a superconducting thin film is related to the quasiparticle density, which depends on the physical temperature and can also be modified by external pair breaking with photons and phonons. This relationship forms the underlying operating principle of Kinetic Inductance Detectors (KIDs), where the detection threshold is governed by the superconducting energy gap. We investigate the electromagnetic properties of thin-film aluminum that is proximitized with either a normal metal layer of copper or a superconducting layer with a lower T-C, such as iridium, in order to extend the operating range of KIDs. Using the Usadel equations along with the Nam expressions for complex conductivity, we calculate the density of states and the complex conductivity of the resulting bilayers to understand the dependence of the pair breaking threshold, surface impedance, and intrinsic quality factor of superconducting bilayers on the relative film thicknesses. The calculations and analyses provide theoretical insights in designing aluminum-based bilayer kinetic inductance detectors for detection of microwave photons and athermal phonons at the frequencies well below the pair breaking threshold of a pure aluminum film.

complex conductivity↗
DOE OSTI2023

Out-of-equilibrium Majorana zero modes in interacting Kitaev chains

Here, we employ a time-dependent real-space local density-of-states method to study the movement and fusion of Majorana zero modes in the one-dimensional interacting Kitaev model, based on the time evolution of many-body states. We analyze the dynamics and both fusion channels of Majoranas using time-dependent potentials, either creating walls or wells. For fast moving Majoranas, we unveil nonequilibrium signatures of the “strong-zero-mode” operator (quasiparity degeneracy in the full spectrum) and its breakdown in the presence of repulsive Coulomb interactions. Focusing on forming a full electron after fusion, we also discuss the upper and lower limits on the Majorana speed needed to reduce nonadiabatic effects and to avoid poisoning due to decoherence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

First-principles investigation of uranium mononitride (UN): Effect of magnetic ordering, spin-orbit interactions and exchange correlation functional

Uranium mononitride (UN) is a promising nuclear fuel that combines the advantageous properties of readily used UO 2 and uranium alloys. Various properties of UN have been previously studied using different density functional theory (DFT) methodologies; however, there are still inconsistencies when it comes to the dynamical stability and defect properties of UN. We address these inconsistencies by studying the UN phonons and defect properties using DFT calculations employing two generalized gradient approximation (GGA) exchange-correlation functionals: PBE and AM05, with and without an added on-site Coulomb repulsion term (+U). Furthermore, we investigate the importance of spin-orbit coupling (SOC) when calculating the properties of UN. We use the different methodologies to determine the preference of UN to have antiferromagnetic (AFM) ordering, as seen in experiments, or ferromagnetic (FM) ordering of the uranium spins. We compare the crystallographic properties, density of states, the DFT X-ray photoelectron spectra and phonon dispersions calculated using the different methodologies. We demonstrate that GGA + U reproduces the AFM ordering in UN, but the crystal structure is dynamically unstable. We also show that magnetic ordering is important in finding the lowest energy defective structure, and that SOC has a distinct influence on the energy of the different uranium interstitial defects. Lastly, we discuss the point defect formation energies under U-rich and N-rich conditions, and the stoichiometric formation energies calculated with the different methodologies, providing insight into the observed tendency for forming hypostoichiometric UN.

36 MATERIALS SCIENCE↗