SEARCH · Engineering Papers

Results for “Content Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Neutron-proton pairing correction in the extended isovector and isoscalar pairing model

An extended O ST (8) model with multi j-orbits is constructed based on the angular momentum decomposition with “pseudo”-spin S for valence nucleons in a j-orbit. It is shown that the isovector S = 0 and T=1 pairs are exactly the J=0 and T=1 pairs in a given j-orbit, while the isoscalar S = 1 pairs are linear combinations of J=odd pairs, with which the pairing Hamiltonian can be used to estimate isovector and isoscalar pairing interactions. As an example of the model application, some low-lying J = 0 + level energies of even-even and odd-odd A=18 – 28 nuclei up to the half-filling in the ds-shell above the 16 O core are fit by the model and compared with the fitting results of the same Hamiltonian in the O LST (8) form. It has been verified from the fitting of both the models that the isoscalar pairing interaction can be neglected in the lower energy part of the spectra of these ds-shell nuclei as far as binding energies and a few J=0 + excited levels of these nuclei are concerned. With the mean-field plus isovector pairing interaction only, neutron-neutron, proton-proton, and neutron-proton pairing contributions at the ground or the lowest J=0 + state of these nuclei are estimated. It is shown that the isovector np-pairing contribution to the binding in the odd-odd N=Z nuclei is systematically larger than that in the even-even nuclei. Furthermore, the isoscalar np-pair content at the lowest J=0+ state of these nuclei is also estimated. In both the O ST (8) and O LST (8) models, it is clearly shown that the isoscalar-pair content in the lowest J=0 + state of the N=Z and N=Z±2 nuclei increases with increasing of the valence nucleons, especially in those even-even nuclei, which indicates the isoscalar pairing correlation to be of importance at low-lying states of N=Z and N=Z±2 nuclei, especially in those even-even nuclei with more valence nucleons up to the half-filling, even though the isoscalar pairing interaction is negligible.

20 ≤ A ≤ 38↗

DOE OSTI2020

Intra-annual variations of regional total column ozone, aerosol optical depth, and water vapor from ground-based, satellite-based and model-based observations

The Microtops II ozonometer has been deployed to continuously measure the total column ozone (TCO), pre-cipitable water content (PWC) and aerosol optical thickness (AOT) at Atigre village (16.74° N, 74.37° E, 604 m above sea level, masl) located on the southeastern slope of Indian western Ghats. The Microtops II ozonometer measurements during the period from September 2017 to June 2018 were analyzed along with the retrieved products of Ozone Monitoring Instrument (OMI) and Moderate Resolution Imaging Spectroradiometer (MODIS) onboard NASA's Terra satellites and also the ERA-interim reanalysis model. We found that the TCO (or PWC) data from the OMI (or MODIS) and the ERA reanalysis model data products are in good agreement. The mea-surements showed strong seasonal variability such that TCO was lowest in the winter season but increased in the summer season, and both PWC and AOT were lowest in the post-monsoon season and increased in the summer season. In continuous ERA-interim reanalysis TCO observations, we found the three types of periodicities in the daily mean TCO as well as PWC (i) The weekly (7 days), (ii) quasi-biweekly (14 to 16 days), (iii) Madden Julian Oscillations (MJO) (30–60 days) oscillations. These oscillations depend on the periodic weather changes in the troposphere. We also observe that the average day to day variability in daily mean TCO observations in the observational period is about 1.4%, 1.1%, 2.62% in the Microtops II ozonometer, ERA-interim reanalysis, and OMI data respectively. We found the positive correlation between daily mean AOT and PWC in all seasons (except monsoon), which is maximum in the winter season, showing the hygroscopic nature of aerosols. The sources of water vapor and aerosol at our location are also studied using back-trajectory analysis.

Nade, Dada R.↗

DOE OSTI2022

Mineral Protection and Resource Limitations Combine to Explain Profile-Scale Soil Carbon Persistence

The fate of soil carbon (C) is largely controlled by microbial oxidation of organic matter (OM), which is constrained by a variety of mechanisms. OM association with soil minerals provides pronounced protection against microbial decomposition. However, factors such as climate, occlusion, and resource limitations also contribute to OM preservation. Here, we explore the factors explaining C distribution and age within an upland rainforest soil in Hawai'i, a site with abundant preferential flow paths (PFPs) and high short-range order (SRO) mineral content. We characterized lateral and vertical changes in Δ 14 C, SRO mineral content, C-functional group chemistry, and microbial community composition to elucidate the contributions of multiple protection mechanisms to OM preservation. Consistent with our expectation, SRO mineral content and Δ 14 C were strongly correlated (R 2 = 0.95), indicating strong mineral protection of OM throughout the profile. Surprisingly, distance from PFP was also a significant predictor of Δ 14 C and improved model fit, particularly in the shallow horizons (R 2 = 0.97). Elevated C/N ratios, decreased microbial abundance, and greater SRO mineral content suggest nitrogen limitations and enhanced mineral protection constrain OM turnover with distance from PFPs in deep, subsurface mineral horizons. Steady microbial abundance, increasing putative anaerobe abundance, and changes in C-functional group chemistry indicate oxygen limitations constrain OM turnover in the matrix of shallow mineral horizons. Given that oxygen and nutrient limitations contribute to OM preservation in this high SRO system—an exemplar of mineral protection—resource limitations may play an even more important role in OM preservation in other well-structured soils.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

CERES : a cryo-EM re-refinement system for continuous improvement of deposited models

The field of electron cryomicroscopy (cryo-EM) has advanced quickly in recent years as the result of numerous technological and methodological developments. This has led to an increase in the number of atomic structures determined using this method. Recently, several tools for the analysis of cryo-EM data and models have been developed within the Phenix software package, such as phenix.real_space_refine for the refinement of atomic models against real-space maps. Also, new validation metrics have been developed for low-resolution cryo-EM models. To understand the quality of deposited cryo-EM structures and how they might be improved, models deposited in the Protein Data Bank that have map resolutions of better than 5 Å were automatically re-refined using current versions of Phenix tools. The results are available on a publicly accessible web page (https://cci.lbl.gov/ceres). The implementation of a Cryo-EM Re-refinement System ( CERES ) for the improvement of models deposited in the wwPDB, and the results of the re-refinements, are described. Based on these results, contents are proposed for a `cryo-EM Table 1', which summarizes experimental details and validation metrics in a similar way to `Table 1' in crystallography. The consistent use of robust metrics for the evaluation of cryo-EM models and data should accompany every structure deposition and be reported in scientific publications.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

X-ray Diffraction of Water in Polyvinylpyrrolidone

PVP is a hydrophilic polymer commonly used as an excipient in pharmaceutical formulations. Here we have performed time-resolved high-energy X-ray scattering experiments on pellets of PVP at different humidity conditions for 1-2 days. A two-phase exponential decay in water sorption is found with a peak in the differential pair distribution function at 2.85 Å, which is attributed to the average (hydrogen bonded) carbonyl oxygen-water oxygen distance. Additional scattering measurements on powders with fixed compositions ranging from 2 to 12.3 wt % H 2 O were modeled with Empirical Potential Structure Refinement (EPSR). Further, the models reveal approximately linear relations between the carbonyl oxygen-water oxygen coordination number (nO C - O W ) and the water oxygen-water oxygen coordination number (nO W - O W ) versus water content in PVP. A stronger preference for water-water hydrogen bonding over carbonyl-water bonding is found. At all the concentrations studied the majority of water molecules were found to be randomly isolated, but a wide distribution of coordination environments of water molecules is found within the PVP polymer strands at the highest concentrations. Overall, the EPSR models indicate a continuous evolution in structure versus water content with nO W - O W =1 occurring at similar to 12 wt % H 2 O, i.e., the composition where, on average, each watermolecule is surrounded by one other water molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Reconstructing f ( T ) gravity and exploring the torsion driven warm inflationary cosmology

The current paper reports an investigation of a warm inflationary scenario in the context of f(T) gravity for a spatially flat FLRW universe. In our model, inflation is driven purely by the torsional sector of f(T) gravity, without introducing any additional scalar fields. We focus on the high dissipative regime (R >> 1), reconstruct the Hubble parameter as a function of the e-folding number N, and derive the slow-roll parameters ε 1 (N) and ε 2 (N). The study has encapsulated the dynamics of inflation and its duration under strong dissipation. The dissipative coefficient Γ is modeled with a temperature-dependent power-law form, linking the inflationary dynamics to thermal corrections and the particle content of the early universe. The analysis has affirmed that the torsion-induced energy density ρ T successfully transitions to radiation energy density ρ rad , facilitating a graceful exit from inflation. Finally, we have validated our model by comparing the scalar spectral index and tensor-to-scalar ratio with Planck 2018 results, demonstrating consistency within observational bounds. Additionally, it is verified that the thermal domination condition T * /H > 1 and the torsion dominance condition ρ T /ρ rad > 1 are satisfied.

Ghosh, Moli [Amity University, Kolkata (India); Mr↗

DOE OSTI2022

Phases of confining SU(5) chiral gauge theory with three generations

We explore the possible low energy phases of the confining non-supersymmetric SU(5) chiral gauge theory with three generations of fermions in the (10+ $\bar{5}$) representations. This theory has the same fermion and gauge matter content as the simplest Georgi-Glashow grand unified theory of the Standard Model and has an SU(3) × SU(3) × U(1) global symmetry. Using ’t Hooft anomaly matching, most attractive channel, and soft SUSY breaking approaches, we outline a number of possible consistent low energy vacua including one with a remnant SO(3) × U(1) symmetry that is analogous to the one-generation model. For the soft SUSY breaking approach, we find that as one extrapolates to large SUSY breaking to recover the original theory, a phase transition is possible. We show that such a phase transition is guaranteed if SUSY breaking is communicated via anomaly mediation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2025

Molecular level insight into non-bilayer structure formation in thylakoid membranes: a molecular dynamics study

In oxygenic photosynthetic organisms, the light reactions are performed by protein complexes embedded in the lipid bilayer of thylakoid membranes (TMs). The organization of the bulk lipid molecules into bilayer structures provide optimal conditions for the build-up of the proton motive force (pmf) and its utilization for ATP synthesis. However, the lipid composition of TMs is dominated by the non-bilayer lipid species monogalactosyl diacylglycerol (MGDG), and functional plant TMs, besides the bilayer, contain large amounts of non-bilayer lipid phases. Bulk lipids have been shown to be associated with lumenal, stromal-side and marginal-region proteins and proposed to play roles in the self-assembly and photoprotection of the photosynthetic machinery. Furthermore, it has recently been pointed out that the generation and utilization of pmf for ATP synthesis according to the ‘protet’ or protonic charge transfer model Kell (Biochim Biophys Acta Bioenerg 1865(4):149504, 2024), requires high MGDG content Garab (Physiol Plant 177(2):e70230, 2025). In this study, to gain better insight into the structural and functional roles of MGDG, we employed all atom and coarse-grained molecular dynamics simulations to explore how temperature, hydration levels and varying MGDG concentrations affect the structural and dynamic properties of bilayer membranes constituted of plant thylakoid lipids. Our findings reveal that MGDG promotes increased membrane fluidity and dynamic fluctuations in membrane thickness. MGDG-rich stacked bilayers spontaneously formed inverted hexagonal phases; these transitions were enhanced at low hydration levels and at elevated but physiologically relevant temperatures. It can thus be inferred that MGDG plays important roles in heat and drought stress mechanisms.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Rheological and pumping behaviour of 3D printable cementitious materials with varying aggregate content

3D printing with cementitious materials is an emerging technology and provides an active area of research. Despite this, there are only limited studies that examine the pumping behaviour of high yield stress fluids such as printable concrete. We present a study on the rheological behaviour of 3D printable cementitious materials with different aggregate-to-binder ratios (a/b) and analyse the pumping and printing characteristics with the measured rheological parameters. We observed that an increase in a/b resulted in a significant increase of plastic viscosity, and a nominal increase in yield stress and storage modulus. The variation in plastic viscosity and yield stress with increasing aggregate content was analysed with the Krieger-Dougherty and Chateau-Ovarlez-Trung model, respectively. Also, the rheological properties of the paste rich lubrication layer during pumping were determined with the help of a tribometer. The yield stress and viscous constant of the lubrication layer increase with the increase in a/b. The pumping pressure predictions were carried out by a suitable theoretical model by considering appropriate flow conditions for different mixtures. The variation in critical height of printed elements with an increase in a/b was correlated with the observed rheological parameters.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Evaluation of material accountancy techniques for 233 Pa from thorium nuclear fuels

Thorium is a promising alternative to uranium as nuclear fuel with advantages such as higher abundance, lower production of long-lived transuranic elements, and potentially better proliferation resistance. However, thorium presents a potential pathway for proliferation where produced 233 Pa can be diverted for the clandestine production of safeguarded 233 U. To prevent this, the ability to detect and measure 233 Pa must be assessed. This paper reviews several nuclear material accountancy techniques to determine their suitability for detecting 233 Pa extracted from irradiated thorium fuel. Hybrid K-edge densitometry and passive gamma spectroscopy have been found to be the best options based on technology maturity, cost, accuracy, and acquisition time. Thorium can be used in various reactor designs such as pressurized water reactors (PWRs), Canada deuterium uranium (CANDU) reactors, and molten salt reactors (MSRs). Therefore, thorium-uranium oxide fueling was modeled for three representative reactors (PWR, CANDU, MSR), burning the fuel to 47 GWd/MTHM for PWR, 19 GWd/MTHM for CANDU, and at a steady power of 52.711 MW/MTHM for MSR. Within each model, the protactinium element in the used fuel was extracted and its isotopic content analyzed. Simulated results indicated that 233 Pa can be detected using passive gamma spectroscopy in each fuel type at all decay times (0–300 days) following separation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2026

Study of the interaction between $Ξ$ baryons and light mesons via femtoscopy at the LHC

Meson-baryon systems with strangeness content provide a unique laboratory for investigating the strong interaction and testing theoretical models of hadron structure and dynamics. In this work, the measured correlation functions for oppositely charged $Ξ$-K and $Ξ$ − 𝜋 pairs obtained in high-multiplicity pp collisions at $\sqrt{𝑠}$ = 13 TeV at the LHC are presented. For the first time, high-precision data on the $Ξ$-K interaction are delivered at small relative momenta. The scattering lengths, extracted via the Lednický–Lyuboshits expression of the pair wavefunction, indicate a repulsive and a shallow attractive strong interaction for the $Ξ$-K and $Ξ$ − 𝜋 systems, respectively. The $Ξ$(1620) and $Ξ$(1690) states are observed in the $Ξ$ − 𝜋 correlation function and their properties, mass and width, are determined. These measurements are in agreement with other available results. Such high-precision data can help refine the understanding of these resonant states, provide stronger constraints for chirally motivated potentials, and address the key challenge of describing the coupled-channel dynamics that may give rise to molecular configurations .

Femtoscopy↗

DOE OSTI2020

Water-Triggered Photoinduced Electron Transfer in Acetonitrile–Water Binary Solvent. Solvent Microstructure-Tuned Reactivity of Hydrophobic Solutes

The solvent-composition dependence of quenching triplet states of benzophenone (3 BP) by anisole in acetonitrile-water (ACN-H2O) mixtures was investigated by laser flash photolysis over the water mole fraction (xw) increasing from 0 to 0.92. Single exponential decay of 3 BP was observed over the whole composition range. The quenching rate constant consistently increased with the water content but increased far more rapidly with xw > 0.7. The water-triggered electron-transfer (ET) mechanism was confirmed by a steeply growing quantum yield of the benzophenone ketyl radical anion, escaping back-ET when the partial water volume exceeded the acetonitrile one. The water-content influence on the 3 BP quenching rate was described by a kinetic model accounting for the microheterogeneous structure of the ACN-H2O mixtures and the very different solubility of the reactants in the solvent components. According to the model, the ET mechanism occurs at a rate constant of 1.46 × 109 M-1 s -1 and is presumably assisted by the ACN-H2O hydrogen-bonding interaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Machine learning for seismic low-frequency extrapolation

The cycle-skipping problem that plagues full waveform inversion (FWI) can be at least partially mitigated if low frequencies (which encode the kinematics of wave propagation in seismic data) are recorded. However, seismic sources and receivers are band-limited, so seismic data does not generally include signals down to 0 Hz. To improve our ability to solve the seismic inverse problem, one can synthesize this missing low-frequency (LF) content from the recorded high-frequency (HF) data using machine learning (ML) models. Deep learning models such as convolutional neural networks (CNNs) demonstrate impressive ability to perform low frequency extrapolation. However, such models require powerful hardware (GPU machines) and careful training. We assess the extrapolation capabilities of three different ML models that do not require GPU machines, namely, random forest, Gaussian process regression and gradient boosting, on both synthetic and real data. Experimental results on two synthetic data sets (generated from a low velocity lens embedded in a homogeneous medium, and the Marmousi model) demonstrate that FWI applied to the extrapolated data consistently improves inversion accuracy relative to FWI applied to the original data sets that do not contain low frequencies. Application of low-frequency extrapolation to real data from the Northwest Shelf of Australia demonstrates that tree-based ML models such as gradient boosting can outperform CNNs in terms of both accuracy and computational cost on non-GPU architectures.

58 GEOSCIENCES↗

DOE OSTI2023

The evolution of HCO + in molecular clouds using a novel chemical post-processing algorithm

Modelling the chemistry of molecular clouds is critical to accurately simulating their evolution. To reduce computational cost, 3D simulations generally restrict their chemistry to species with strong heating and cooling effects. Time-dependent information about the evolution of other species is therefore often neglected. We address this gap by post-processing tracer particles in the SILCC-Zoom molecular cloud simulations. Using a chemical network of 39 species and 301 reactions (including freeze-out of CO and H 2 O) and a novel algorithm to reconstruct a density grid from sparse tracer particle data, we produce time-dependent density distributions for various species. We focus upon the evolution of HCO + , which is a critical formation reactant of CO but is not typically modelled on the fly. We find that ∼ 90 per cent of the HCO + content of the cold molecular gas forms in situ around n HCO + ∼ 10 3 –10 4 cm −3 , over a time-scale of approximately 1 Myr. The remaining ∼ 10 per cent forms at high extinction sites, with minimal turbulent mixing out into the less dense gas. We further show that the dominant HCO + formation pathway is dependent on the visual extinction, with the reaction H 3 + + CO contributing 90 per cent of the total HCO + production above A V, 3D = 3. We produce the very first maps of the HCO + column density, N(HCO + ), and show that it reaches values as high as 10 15 cm −2 . We find that 50 per cent of the HCO + mass is located within AV ∼ 10–30 in a density range of 10 3.5 –10 4.5 cm −3 . Our maps of N(HCO + ) are shown to be in good agreement with recent observations of the W49A star-forming region.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2025

Leveraging Pre-Built Catalogs and Object-Level Scheduling to Eliminate I/O Bottlenecks in HPC Environments

Modern High-Performance Computing (HPC) environments face mounting challenges due to the shift from large to small file datasets, along with an increasing number of users and parallelized applications. As HPC systems rely on Parallel File Systems (PFS), such as Lustre for data processing, performance bottlenecks stemming from Object Storage Target (OST) contention have become a significant concern. Existing solutions, such as LADS with its object-level scheduling approach, fall short in large-scale HPC environments due to their inability to effectively address metadata I/O bottlenecks and the growing number of I/O processes. This study highlights the pressing need for a comprehensive solution that tackles both OST contention and metadata I/O challenges in diverse HPC workloads. To address these challenges, we propose SwiftLoad, an object-level I/O scheduling framework that leverages a metadata catalog to enhance the performance and efficiency of parallel HPC utilities. The adoption of the metadata catalog mitigates the metadata I/O bottlenecks that commonly occur in HPC utilities, a challenge that is particularly pronounced in object-level I/O scheduling. SwiftLoad addresses OST contention and the uneven distribution of I/O processes across different OSTs through mathematical modeling and incorporates a Loader Configuration Module to regulate the number of I/O processes. Evaluated with two representative utilities—data deduplication profiling and data augmentation—SwiftLoad achieved performance improvements of up to 5.63x and 11.0x, respectively, on a production supercomputer.

HPC↗

DOE OSTI2021

Quantifying Negative Effects of Carbon-Binder Networks from Electrochemical Performance of Porous Li-Ion Electrodes

Porous Li-ion electrodes contain active particles, ion transporting electrolyte, and carbon-binder networks. While macrohomogeneous models are often used to predict electrode behavior, accurate predictions remain challenging, owing to the incomplete understanding of the critical role of carbon-binder networks and how they affect the electrochemical response. The present study systematically characterizes these effects in terms of effective properties by utilizing macrohomogeneous models to analyze the measured responses for electrodes with different carbon-binder content, electrode thickness, and porosity but with identical materials. We find that the impact of the carbon-binder network is more severe than previously thought. Even for low carbon-binder content (5 %wt. dry electrode), the presence of the network decreases the reaction area and increases the ion transport resistance, negatively impacting electrode performance. These effects scale with not just porosity or active material volume but also with carbon-binder content. The findings underscore the importance of connecting all effective properties to electrode specifications in a full factorial sense to transform the electrode design paradigm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Washington Housing Electrification Analysis [Slides]

This technical assistance is part of the Communities Local Energy Action Program (CLEAP) for the community of Beacon Hill, Seattle, WA. This analysis focuses on opportunities to reduce energy burden, energy consumption, and energy bills for both single family homes and large multifamily buildings. It uses state-level data from the ResStock modelling tool that was filtered to be relevant to Beacon Hill. Hence, this content includes single family detached homes and large multifamily buildings in the income group of 0-80% AMI, and climate zone 4c (mixed temperatures, relatively cooler summers) within Washington State.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2022

Lattice Observables for Parton Distributions

In recent years there has been a momentous surge of interest in the determination of the parton content of nucleons using lattice QCD. Scalar field theory is a convenient toy model to understand the relation between Euclidean correlators and Parton Distribution Functions (PDFs). In this talk we review the factorization formulae that allow the extraction of PDFs from the pseudo-PDFs and quasi-PDFs computed on the lattice. The scalar theory provides a simplified setting where the main physical properties are easily analysed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗