SEARCH · Engineering Papers

Results for “Concentrating Solar Power”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

All sources NASA NTRS DOE OSTI

NASA NTRS1978

The solar power satellite concept evaluation program

The paper describes in detail one of the preliminary baseline concepts for the solar power satellite (SPS). A large space freighter with payload capacity of 424 metric tons will deliver the material to a construction base in low earth orbit where the eight modules of the satellite are constructed. Electric thrusters will propel the modules to a smaller geosynchronous base, where the modules are docked and the solar arrays are deployed to form a satellite capable of providing 5 GW power from each of two end-mounted antennas to the two ground rectennas. The solar array is 5.3 km by 21.3 km to provide a total platform area of 113 sq km. The solar array employs silicon solar cells with a concentration ratio of unity. Details on transportation, construction bases, rectenna, and solar array design are given along with material requirements and cost estimates.

Piland, R. O.↗

NASA NTRS1981

Wide field of view laser beacon system for three-dimensional aircraft position measurement

This paper presents a new wide field of view laser beacon system for measurement, in three dimensions, of aircraft or other remote objects. The system is developed for aircraft collision hazard warning independent of ground-based hardware, as well as for flight research, helicopter-assisted construction and rescue, and robotic manipulation applications. Accurate information describing the relative range, elevation, and azimuth of the aircraft are generated by the sweep of a low-power fan-shaped rotating laser beacon past an array of optical detectors. The system achieves a wide angle of acceptance of laser beacon light through use of compound parabolic concentrators, which collimate the light for spectral filtering to minimize solar interference. An on-board microprocessor system converts the pulse sequence to aircraft position in real time. System reliability and performance are enhanced through narrow pass filtering of the pulse signals, digital logic design to mask spurious signals, and adaptive modulation of trigger threshold levels.

Sweet, L. M.↗

NASA NTRS1985

Performance of Hughes GaAs concentrator cells under 1-MeV electron irradiation

Several Hughes gallium arsenide (GaAs) concentrator cells were exposed to 1-MeV electrons at fluences up to 1x10 to the 15th power electrons/sq cm. Performance data were taken after several fluences, at two temperatures, and at concentration levels from 1 to approx. 150x AMO. Data at 1 sun and 25 deg C were taken with an X-25 xenon-lamp solar simulator. Data at concentration were taken using a pulsed solar simulator with the assumption of a linear relationship between short-circuit current and irradiance. The cells are 5 by 5 mm with a 4-mm diameter illuminated area.

Curtis, H. B.↗

NASA NTRS1987

Solar Pump

Proposed pump moves liquid by action of bubbles formed by heat of sun. Tube of liquid having boiling point of 100 to 200 degrees F placed at focal axis of cylindrical reflector. Concentrated sunlight boils liquid at focus, and bubbles of vapor rise in tube, carrying liquid along with them. Pressure difference in hot tube sufficient to produce flow in large loop. Used with conventional flat solar heating panel in completely solar-powered heat-storage system.

Pique, Charles↗

NASA NTRS1987

Performance characteristics of a combination solar photovoltaic heat engine energy converter

A combination solar photovoltaic heat engine converter is proposed. Such a system is suitable for either terrestrial or space power applications. The combination system has a higher efficiency than either the photovoltaic array or the heat engine alone can attain. Advantages in concentrator and radiator area and receiver mass of the photovoltaic heat engine system over a heat-engine-only system are estimated. A mass and area comparison between the proposed space station organic Rankine power system and a combination PV-heat engine system is made. The critical problem for the proposed converter is the necessity for high temperature photovoltaic array operation. Estimates of the required photovoltaic temperature are presented.

Chubb, Donald L.↗

NASA NTRS1987

Combination solar photovoltaic heat engine energy converter

Chubb, Donald L.↗

NASA NTRS1987

Performance characteristics of a combination solar photovoltaic heat engine energy converter

Chubb, Donald L.↗

NASA NTRS1990

Preliminary design of an advanced Stirling system for terrestrial solar energy conversion

A preliminary design was generated for an advanced Stirling conversion system (ASCS) that will be capable of delivering about 25 kW of electric power to an electric utility grid. Stirling engines are being evaluated for terrestrial solar applications. A two-year task to complete detailed design, fabrication, assembly and testing of an ASCS prototype began in April, 1990. The ASCS is designed to deliver maximum power per year over a range of solar inputs with a design life of 30 years (60,000 h). The ACSC has a long-term cost goal of about $450 per kilowatt, exclusive of the 11-m parabolic dish concentrator. The proposed system includes a Stirling engine with high-pressure hydraulic output, coupled with a bent axis variable displacement hydraulic motor and a rotary induction generator. The major thrusts of the preliminary design are described, including material selection for the hot-end components, heat transport system (reflux pool boiler) design, system thermal response, improved manufacturability, FMECA/FTA analysis, updated manufacturing cost estimate, and predicted system performance.

White, M. A.↗

NASA NTRS2002

Analytical Modal Analysis for Thin-Film Flat Lenses

Due to strong potential applications and more demanding requirements imposed upon thin-film structures for space deployable, there has been increasing research and development activities during recent years in the field of vibration analysis of these types of structures. Moreover, interests in employing these structural components have received renewed emphasis in recent years within NASA and the Air Force. This is due to their inherent lightweight, low packaging and launch volume, and relative simplicity of deployment. Among the potential mission concepts for which these structural elements are included, one can mention solar sails, space solar power generation systems, solar thermal propulsion vehicles, large space telescopes, and inflatable communication antennas. This paper presents analytical procedures to determine vibration and physical characteristics of thin film lenses with circular and elliptical shapes membranes considered in design of a solar concentrator. In general, three methods are used to obtain approximate solutions of Helmholtz boundary value problems. One method requires that solution satisfy the differential equation exactly and the boundary condition approximately. Another method demands a solution that satisfies the boundary conditions exactly and the governing equations approximately. The third method sees a solution that satisfies both the governing equation and boundary conditions approximately. Extensive reviews of vibrations of membrane and plates are provided by Leissa and Mazumdar.

Hamid R. Hamidzadeh↗

NASA NTRS1985

Development of an Organic Rankine-Cycle power module for a small community solar thermal power experiment

An organic Rankine-cycle (ORC) power module was developed for use in a multimodule solar power plant to be built and operated in a small community. Many successful components and subsystems, including the reciever, power conversion subsystem, energy transport subsystem, and control subsystem, were tested. Tests were performed on a complete power module using a test bed concentrator in place of the proposed concentrator. All major single-module program functional objectives were met and the multimodule operation presented no apparent problems. The hermetically sealed, self-contained, ORC power conversion unit subsequently successfully completed a 300-hour endurance run with no evidence of wear or operating problems.

Kiceniuk, T.↗

NASA NTRS1984

Thin-film reliability and engineering overview

The reliability and engineering technology base required for thin film solar energy conversions modules is discussed. The emphasis is on the integration of amorphous silicon cells into power modules. The effort is being coordinated with SERI's thin film cell research activities as part of DOE's Amorphous Silicon Program. Program concentration is on temperature humidity reliability research, glass breaking strength research, point defect system analysis, hot spot heating assessment, and electrical measurements technology.

Ross, R. G., Jr.↗

NASA NTRS1986

Power is the keystone

An evaluation is made of the various technologies that have been considered for incorporation into the NASA Space Station's solar power system. A major feature of the system is noted to be the use of both 25 kW capacity of photovoltaic power and two 25-kW turbine-driven generators based on the heating of a working fluid by a mirror concentrator dish. Fuel cells will be used to store excess electrical energy, together with nickel-cadmium batteries. The selection of this manned Space Station power system was arrived at through a comparison of six different configurations.

Thomas, R. L.↗

NASA NTRS2006

The Stretched Lens Array SquareRigger (SLASR) for Space Power

For the past three years, our team has been developing, refining, and maturing a unique solar array technology known as Stretched Lens Array SquareRigger (SLASR). SLASR offers an unprecedented portfolio of state-of-the-art performance metrics, including areal power density, specific power, stowed power density, high-voltage capability, radiation hardness, modularity, scalability, mass-producibility, and cost-effectiveness. SLASR is particularly well suited to high-power space missions, including solar electric propulsion (SEP) space tugs, major exploration missions to the Moon and Mars, and power-intensive military spacecraft. SLASR is also very well suited to high-radiation missions, since the cell shielding mass penalty is 85% less for the SLASR concentrator array than for one-sun planar arrays. The paper describes SLASR technology and presents significant results of developments to date in a number of key areas, from advances in the key components to full-scale array hardware fabrication and evaluation. A summary of SLASR s unprecedented performance metrics, both near-term and longer term, will be presented. Plans for future SLASR developments and near-term space applications will also be outlined.

Piszczor, Michael F.↗

NASA NTRS1980

Satellite power systems (SPS) concept definition study. Volume 1: Executive summary

System definition studies resulted in a further definition of the reference system using gallium arsenide solar arrays, analysis of alternative subsystem options for the reference concept, preliminary solid state microwave concept studies, and an environmental analysis of laser transmission systems. The special emphasis studies concentrated on satellite construction, satellite construction base definition, satellite construction base construction, and rectenna construction. Major emphasis in the transportation studies was put on definition of a two stage parallel burn, vertical takeoff/horizontal landing concept. The electric orbit transfer vehicle was defined in greater detail. Program definition included cost analyses and schedule definition.

Hanley, G. M.↗

NASA NTRS1979

Phase 1 of the First Small Power System Experiment (engineering Experiment No. 1). Volume 1: Executive Summary

The development of a modular solar thermal power system for application in the 1 to 10 MWe range is presented. The system is used in remote utility applications, small communities, rural areas, and for industrial uses. Investigations are performed on the energy storage requirements and type of energy storage, concentrator design and field optimization, energy transport, and power conversion subsystems. The system utilizes a Rankine cycle, an axial flow steam turbine for power conversion, and heat transfer sodium for collector fluid.

Holl, R. J.↗

NASA NTRS1984

The status of power supplies for primary electric propulsion in the U.S.A.

This paper reviews the status of and requirements on solar electric and nuclear electric power supplies for primary electric propulsion missions. The power supply requirements of power level, specific mass (kg/kWe) and lifetime are defined as a function of the mission and electric propulsion system characteristics for planetary missions. The technology status of planar and concentrator arrays is discussed. Nuclear reactors and thermoelectric, thermionic, Brayton and Rankine conversion technologies are reviewed, as well as recent nuclear power system design concepts and program activity. Technology projections for power supplies applicable to primary electric propulsion missions are included.

Jones, R. M.↗

NASA NTRS1978

High-power, ultralow-mass solar arrays: FY-77 solar arrays technology readiness assessment report, volume 2

Development efforts are reported in detail for: (1) a lightweight solar array system for solar electric propulsion; (2) a high efficiency thin silicon solar cell; (3) conceptual design of 200 W/kg solar arrays; (4) fluorocarbon encapsulation for silicon solar cell array; and (5) technology assessment of concentrator solar arrays.

Costogue, E. N.↗

NASA NTRS1995

Flight data from the PASP-Plus experiment

The photovoltaic array space power (PASP)-Plus solar cell flight experiment is described, and the observed performances of different solar cell types during the first six months of their operation, are summarized. The solar cell types include single crystal and amorphous silicon, GaAs, several multijunction cell types, indium phosphide and GaAs/GaSb concentrator cells. The radiation degradation experienced by some of the solar cell types agrees with theoretical predictions. Other samples, including silicon, are degraded less than predicted. Effects, including the increase in temperature of all the experiments and the effect of sun glint on cell measurement, are discussed.

Marvin, D. C.↗