Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Computational Margin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Computational Analysis of a Wing Designed for the X-57 Distributed Electric Propulsion Aircraft

A computational study of the wing for the distributed electric propulsion X-57 Maxwell airplane configuration at cruise and takeoff/landing conditions was completed. Two unstructured-mesh, Navier-Stokes computational fluid dynamics methods, FUN3D and USM3D, were used to predict the wing performance. The goal of the X-57 wing and distributed electric propulsion system design was to meet or exceed the required lift coefficient 3.95 for a stall speed of 58 knots, with a cruise speed of 150 knots at an altitude of 8,000 ft. The X-57 Maxwell airplane was designed with a small, high aspect ratio cruise wing that was designed for a high cruise lift coefficient (0.75) at angle of attack of 0deg. The cruise propulsors at the wingtip rotate counter to the wingtip vortex and reduce induced drag by 7.5 percent at an angle of attack of 0.6deg. The unblown maximum lift coefficient of the high-lift wing (with the 30deg flap setting) is 2.439. The stall speed goal performance metric was confirmed with a blown wing computed effective lift coefficient of 4.202. The lift augmentation from the high-lift, distributed electric propulsion system is 1.7. The predicted cruise wing drag coefficient of 0.02191 is 0.00076 above the drag allotted for the wing in the original estimate. However, the predicted drag overage for the wing would only use 10.1 percent of the original estimated drag margin, which is 0.00749.

Deere, Karen A.↗
DOE OSTI2023

Energetic particle marginal stability profile for HL-2M integrated simulation based on neural network module

Abstract A critical gradient model is employed to develop a module of energetic particle (EP) marginal stability profiles in OMFIT integrated simulations for studying EP transport. Currently, each iteration of transport evolution is approximately 10 min in the integrated simulation, whereas, the EP marginal stability profile, which serves as an input in the integrated simulation could take much longer; the reason being a combination of the TGLFEP and EPtran codes is employed in our previous investigation. To reduce the simulation time, the critical gradient is predicted by a neural network instead of the TGLFEP code, and the EPtran code is revised with parallel computing, so that the running time of this module can be controlled to within 5 min. The predictions are in good agreement with previous approaches. The integrated simulation of HL-2M with Alfven eigenmodes transported by neutral beam EP profiles indicates that EP transport reduces the total pressure and current as expected, but could also under some conditions raise the safety factor in the core, which is favorable for reversed magnetic shear and high-performance plasmas.

Physics↗
NASA NTRS1989

A complete spherical harmonic approach to luni-solar tides

In this work a spherical harmonic theory of ocean tides is presented. The theory is based on Laplace tide equations modified to include turbulence with constant eddy viscosity, linearized bottom friction, and oceanic loading and self-gravitation. Variable bathymetry is also treated in harmonic terms, and no-flow boundary conditions are applied at continental coastlines. The tide and boundary constraint equations are reduced to matrix form and solved by a weighted least-squares procedure. Five zonal luni-solar tides, ranging in period from 14 days to 18.6 yr, are investigated using the theory; such tides have typically been difficult to compute using traditional numerical approaches. The polar motion and changes in the length of day induced by these long-period tides are calculated. Tidal solutions are compared extensively with results from other tidal theories and from recent satellite and sea-level observations. The greatest limitation to accurate prediction of zonal tides - for any theory - appears to be the marginal failure of all tide theories to conserve mass globally; the use of additional mass constraints may be warranted.

Dickman, S. R.↗
NASA NTRS1998

High-Alpha Research Vehicle Lateral-Directional Control Law Description, Analyses, and Simulation Results

This report contains a description of a lateral-directional control law designed for the NASA High-Alpha Research Vehicle (HARV). The HARV is a F/A-18 aircraft modified to include a research flight computer, spin chute, and thrust-vectoring in the pitch and yaw axes. Two separate design tools, CRAFT and Pseudo Controls, were integrated to synthesize the lateral-directional control law. This report contains a description of the lateral-directional control law, analyses, and nonlinear simulation (batch and piloted) results. Linear analysis results include closed-loop eigenvalues, stability margins, robustness to changes in various plant parameters, and servo-elastic frequency responses. Step time responses from nonlinear batch simulation are presented and compared to design guidelines. Piloted simulation task scenarios, task guidelines, and pilot subjective ratings for the various maneuvers are discussed. Linear analysis shows that the control law meets the stability margin guidelines and is robust to stability and control parameter changes. Nonlinear batch simulation analysis shows the control law exhibits good performance and meets most of the design guidelines over the entire range of angle-of-attack. This control law (designated NASA-1A) was flight tested during the Summer of 1994 at NASA Dryden Flight Research Center.

Davidson, John B.↗
NASA NTRS2000

Aerobraking at Venus and Mars: A Comparison of the Magellan and Mars Global Surveyor Aerobraking Phases

On February 4, 1999 the Mars Global Surveyor spacecraft became the second spacecraft to successfully aerobrake into a nearly circular orbit about another planet. This paper will highlight some of the similarities and differences between the aerobraking phases of this mission and the first mission to use aerobraking, the Magellan mission to Venus. Although the Mars Global Surveyor (MGS) spacecraft was designed for aerobraking and the Magellan spacecraft was not, aerobraking MGS was a much more challenging task than aerobraking Magellan, primarily because the spacecraft was damaged during the initial deployment of the solar panels. The MGS aerobraking phase had to be completely redesigned to minimize the bending moment acting on a broken yoke connecting one of the solar panels to the spacecraft. Even if the MGS spacecraft was undamaged, aerobraking at Mars was more challenging than aerobraking at Venus for several reasons. First, Mars is subject to dust storms, which can significantly change the temperature of the atmosphere due to increased solar heating in the low and middle altitudes (below 50 km), which in turn can significantly increase the density at the aerobraking altitudes (above 100 km). During the first part of the MGS aerobraking phase, a regional dust storm was observed to have a significant and very rapid effect on the entire atmosphere of Mars. Computer simulations of global dust storms on Mars indicate that even larger density increases are possible than those observed during the MGS aerobraking phases. For many aerobraking missions, the duration of the aerobraking phase must be kept as short as possible to minimize the total mission cost. For Mars missions, a short aerobraking phase means that there will be less margin to accommodate atmospheric variability, so the operations team must be ready to propulsively raise periapsis by tens of kilometers on very short notice. This issue was less of a concern on Venus, where the thick lower atmosphere and the slow planet rotation resulted in more predictable atmospheric densities from one orbit to the next.

Lyons, Daniel T.↗
NASA NTRS2003

International Space Station Microgravity Analytical Model Correlation And Update

The acceleration environment aboard the completed International Space Station (ISS) is a key resource for scientific and technological endeavors. Hardware verification activIties and early measurements indicate that the ISS is well on the way of meeting these "Assembly Complete" "microgravity" provisions, however, the simulation models that compute these accelerations have, to date, lacked the high degree of empirical validation typical of standard aerospace industry practices. Assembly stage, on-orbit measurements are used to address this shortcoming and to develop higher confidence in the simulation models. The Phase I correlation results show the analyses to be consistently conservative, producing higher than measured levels. The 25 to 30% greater quasi-steady computations are deemed acceptable for verification. Updates are made to localized structural dynamic and vibroacoustic parameters that reduce responses in selected one-third octave bands by almost 50%. These models are then used for the Assembly Complete verification analysis which concludes that the ISS vehicle meets the ISS microgravity requirements with minor reservations. Two of the sixteen rack are marginally non-compliant in the quasi-steady regime, and operational constraints are needed on the U. S. Lab and ESA APM vacuum resource vents, and the Russian Resistive Exercise Device in the structural dynamic regime.

DelBasso, Steve↗
DOE OSTI2021

Transparent Object Tracking Benchmark

Visual tracking has achieved considerable progress in recent years. However, current research in the field mainly focuses on tracking of opaque objects, while little attention is paid to transparent object tracking. In this paper, we make the first attempt in exploring this problem by proposing a Transparent Object Tracking Benchmark (TOTB). Specifically, TOTB consists of 225 videos (86K frames) from 15 diverse transparent object categories. Each sequence is manually labeled with axis-aligned bounding boxes. To the best of our knowledge, TOTB is the first benchmark dedicated to transparent object tracking. In order to understand how existing trackers perform and to provide comparison for future research on TOTB, we extensively evaluate 25 state-of-the-art tracking algorithms. The evaluation results exhibit that more efforts are needed to improve transparent object tracking. Besides, we observe some nontrivial findings from the evaluation that are discrepant with some common beliefs in opaque object tracking. For example, we find that deeper features are not always good for improvements. Moreover, to encourage future research, we introduce a novel tracker, named TransATOM, which leverages transparency features for tracking and surpasses all 25 evaluated approaches by a large margin. By releasing TOTB, we expect to facilitate future research and application of transparent object tracking in both the academia and industry.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1977

Analysis of dynamic inlet distortion applied to a parallel compressor model

An investigation of surge was conducted by using a parallel compressor model of the J85-13 compressor implement on an analog computer. Surges were initiated by various types of dynamic disturbances in inlet pressure. The compressor model was less sensitive to disturbances of short duration, high frequency, and long duration where the compressor discharge pressure could react. Adding steady distortion to dynamic disturbances reduced the amount of dynamic disturbance required to effect surge. Steady and unsteady distortions combined linearly to reduce surge margin.

Wenzel, L. M.↗
NASA NTRS1977

Integration of remote sensing and surface geophysics in the detection of faults

Remote sensing was included in a comprehensive investigation of the use of geophysical techniques to aid in underground mine placement. The primary objective was to detect faults and slumping, features which, due to structural weakness and excess water, cause construction difficulties and safety hazards in mine construction. Preliminary geologic reconnaissance was performed on a potential site for an underground oil shale mine in the Piceance Creek Basin of Colorado. LANDSAT data, black and white aerial photography and 3 cm radar imagery were obtained. LANDSAT data were primarily used in optical imagery and digital tape forms, both of which were analyzed and enhanced by computer techniques. The aerial photography and radar data offered supplemental information. Surface linears in the test area were located and mapped principally from LANDSAT data. A specific, relatively wide, linear pointed directly toward the test site, but did not extend into it. Density slicing, ratioing, and edge enhancement of the LANDSAT data all indicated the existence of this linear. Radar imagery marginally confirmed the linear, while aerial photography did not confirm it.

Jackson, P. L.↗
NASA NTRS1995

On the joint spectral density of bivariate random sequences

For univariate random sequences, the power spectral density acts like a probability density function of the frequencies present in the sequence. This dissertation extends that concept to bivariate random sequences. For this purpose, a function called the joint spectral density is defined that represents a joint probability weighing of the frequency content of pairs of random sequences. Given a pair of random sequences, the joint spectral density is not uniquely determined in the absence of any constraints. Two approaches to constraining the sequences are suggested: (1) assume the sequences are the margins of some stationary random field, (2) assume the sequences conform to a particular model that is linked to the joint spectral density. For both approaches, the properties of the resulting sequences are investigated in some detail, and simulation is used to corroborate theoretical results. It is concluded that under either of these two constraints, the joint spectral density can be computed from the non-stationary cross-correlation.

Aalfs, David D.↗
DOE OSTI2021

The Energy Exascale Earth System Model Simulations With High Vertical Resolution in the Lower Troposphere

Abstract General circulation models (GCMs) are typically run with coarse vertical resolution. For example, the Energy Exascale Earth System Model (E3SM) has a vertical resolution of about 200 m in the boundary layer, which is far too coarse to resolve sharp gradients often found in the thermodynamic fields capping subtropical marine stratocumulus. In this article, we present a series of multiyear atmosphere only simulations of E3SM version 1 where we progressively increase the vertical resolution in the lower troposphere to scales approaching those often used in large eddy simulation (LES). We report marginal impacts in regards to the simulation of boundary layer clouds when vertical resolution is moderately increased, yet find significant positive impacts when the vertical resolution approaches that typically used in LES (∼10 m). In these experiments, there is a marked change in the simulated turbulence and thermodynamics which leads to more abundant marine stratocumulus. However, these simulations are burdened with excessive computational cost. They are also subject to degradations in overall climate metrics due to time step sensitivities and because some processes and parameterizations are sensitive to changes in the vertical resolution.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

BeyondPlanck: XII. Cosmological parameter constraints with end-to-end error propagation

We present cosmological parameter constraints estimated using the Bayesian BEYONDPLANCK analysis framework. This method supports seamless end-to-end error propagation from raw time-ordered data onto final cosmological parameters. As a first demonstration of the method, we analyzed time-ordered Planck LFI observations, combined with selected external data (WMAP 33–61 GHz, Planck HFI DR4 353 and 857 GHz, and Haslam 408 MHz) in the form of pixelized maps that are used to break critical astrophysical degeneracies. Overall, all the results are generally in good agreement with previously reported values from Planck 2018 and WMAP, with the largest relative difference for any parameter amounting about 1σ when considering only temperature multipoles between 30 ≤ ℓ ≤ 600. In cases where there are differences, we note that the BEYONDPLANCK results are generally slightly closer to the high-ℓ HFI-dominated Planck 2018 results than previous analyses, suggesting slightly less tension between low and high multipoles. Using low-ℓ polarization information from LFI and WMAP, we find a best-fit value of τ = 0.066 ± 0.013, which is higher than the low value of τ = 0.052 ± 0.008 derived from Planck 2018 and slightly lower than the value of 0.069 ± 0.011 derived from the joint analysis of official LFI and WMAP products. Most importantly, however, we find that the uncertainty derived in the BEYONDPLANCK processing is about 30 % greater than when analyzing the official products, after taking into account the different sky coverage. We argue that this uncertainty is due to a marginalization over a more complete model of instrumental and astrophysical parameters, which results in more reliable and more rigorously defined uncertainties. We find that about 2000 Monte Carlo samples are required to achieve a robust convergence for a low-resolution cosmic microwave background (CMB) covariance matrix with 225 independent modes, and producing these samples takes about eight weeks on a modest computing cluster with 256 cores.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1975

Douglas Experience in Flight Flutter Testing

Douglas Aircraft Company experience in flight flutter testing is reviewed briefly, with comments on state-of-the-art excitation and instrumentation techniques used up to the present time. The limitations of previous techniques are discussed with emphasis on the problem of: (1) establishing a flutter margin of safety for predicted marginal flutter modes; (2) resolving instances of flutter not predicted by theoretical calculations in advance; and (3) delaying the airplane demonstration by time consumed in acquisition and reduction of flutter data. Current Douglas philosophy in flight flutter testing is presented and a description given of steady-state vane excitation system development, automatic data handling system, and the potential application of automatic computing methods for increasing flutter data yield.

Philbrick, J.↗
NASA NTRS2001

Nondestructive Evaluation Methodologies Developed for Certifying Composite Flywheels

Manufacturing readiness of composite rotors and certification of flywheels depend in part on the maturity of nondestructive evaluation (NDE) technology for process optimization and quality assurance, respectively. At the NASA Glenn Research Center, the capabilities and limitations of x-ray-computed tomography and radiography, as well as advanced ultrasonics were established on NDE ring and rotor standards with electrical discharge machining (EDM) notches and drilled holes. Also, intentionally seeded delamination, tow break, and insert of bagging material were introduced in hydroburst-rings to study the NDE detection capabilities of such anomalies and their effect on the damage tolerance and safe life margins of subscale rings and rotors. Examples of possible occurring flaws or anomalies in composite rings as detected by NDE and validated by destructive metallography are shown. The general NDE approach to ensure the quality of composite rotors and to help in the certification of flywheels is briefly outlined.

Baaklini, George Y.↗
NASA NTRS1992

Aerodynamic simulation on massively parallel systems

This paper briefly addresses the computational requirements for the analysis of complete configurations of aircraft and spacecraft currently under design to be used for advanced transportation in commercial applications as well as in space flight. The discussion clearly shows that massively parallel systems are the only alternative which is both cost effective and on the other hand can provide the necessary TeraFlops, needed to satisfy the narrow design margins of modern vehicles. It is assumed that the solution of the governing physical equations, i.e., the Navier-Stokes equations which may be complemented by chemistry and turbulence models, is done on multiblock grids. This technique is situated between the fully structured approach of classical boundary fitted grids and the fully unstructured tetrahedra grids. A fully structured grid best represents the flow physics, while the unstructured grid gives best geometrical flexibility. The multiblock grid employed is structured within a block, but completely unstructured on the block level. While a completely unstructured grid is not straightforward to parallelize, the above mentioned multiblock grid is inherently parallel, in particular for multiple instruction multiple datastream (MIMD) machines. In this paper guidelines are provided for setting up or modifying an existing sequential code so that a direct parallelization on a massively parallel system is possible. Results are presented for three parallel systems, namely the Intel hypercube, the Ncube hypercube, and the FPS 500 system. Some preliminary results for an 8K CM2 machine will also be mentioned. The code run is the two dimensional grid generation module of Grid, which is a general two dimensional and three dimensional grid generation code for complex geometries. A system of nonlinear Poisson equations is solved. This code is also a good testcase for complex fluid dynamics codes, since the same datastructures are used. All systems provided good speedups, but message passing MIMD systems seem to be best suited for large miltiblock applications.

Haeuser, Jochem↗
DOE OSTI2023

Optimizing cloud motion estimation on the edge with phase correlation and optical flow

Abstract. Phase correlation (PC) is a well-known method for estimating cloud motion vectors (CMVs) from infrared and visible spectrum images. Commonly, phase shift is computed in the small blocks of the images using the fast Fourier transform. In this study, we investigate the performance and the stability of the blockwise PC method by changing the block size, the frame interval, and combinations of red, green, and blue (RGB) channels from the total sky imager (TSI) at the United States Atmospheric Radiation Measurement user facility's Southern Great Plains site. We find that shorter frame intervals, followed by larger block sizes, are responsible for stable estimates of the CMV, as suggested by the higher autocorrelations. The choice of RGB channels has a limited effect on the quality of CMVs, and the red and the grayscale images are marginally more reliable than the other combinations during rapidly evolving low-level clouds. The stability of CMVs was tested at different image resolutions with an implementation of the optimized algorithm on the Sage cyberinfrastructure test bed. We find that doubling the frame rate outperforms quadrupling the image resolution in achieving CMV stability. The correlations of CMVs with the wind data are significant in the range of 0.38–0.59 with a 95 % confidence interval, despite the uncertainties and limitations of both datasets. A comparison of the PC method with constructed data and the optical flow method suggests that the post-processing of the vector field has a significant effect on the quality of the CMV. The raindrop-contaminated images can be identified by the rotation of the TSI mirror in the motion field. The results of this study are critical to optimizing algorithms for edge-computing sensor systems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Micromechanical Surrogate Machine Learning Model for Creep Deformation Modeling

Process variability during the manufacture of gas turbine engine hot section components can significantly affect the material’s resulting microstructure. In casting, for instance, geometric variation within a component (thin sections versus thick sections, radial location) influences cooling rates and the resulting grain size. The high temperature creep response is known to be sensitive to grain size owing to a diffusional creep mechanism which occurs more readily along grain boundaries. Microstructural variation correspondingly drives mechanical behavior which propagates into component scale performance uncertainty. These factors are essential when planning inspection, maintenance, and repair strategies within a reliability framework. These benefits provide opportunities to increase overall energy efficiency through refined margins. Critically, there is an opportunity to bolster existing data-driven reliability models using physics-driven process-structure-property relations. Here we present recent work establishing a framework for evaluating the probabilistic creep performance of high-temperature materials. A novel microstructure-sensitive crystal plasticity finite element model is established that captures both grain boundary and crystallographic deformation effects. The computationally expensive physics model is calibrated using a statistical approach and this high-fidelity model is subsequently used to train a computationally efficient machine learning surrogate model. The surrogate model is essential for sampling a large ensemble of simulated structure-property pair results. The ensemble data are then mined to extract salient trends to be incorporated into a microstructure-sensitive reliability model. The proposed approach represents a novel way to capture microstructure-sensitive trends from physics-based models within a modern reliability framework.

Fernandez-Zelaia, Patxi [ORNL]↗
NASA NTRS2003

Unsteady Probabilistic Analysis of a Gas Turbine System

In this work, we have considered an annular cascade configuration subjected to unsteady inflow conditions. The unsteady response calculation has been implemented into the time marching CFD code, MSUTURBO. The computed steady state results for the pressure distribution demonstrated good agreement with experimental data. We have computed results for the amplitudes of the unsteady pressure over the blade surfaces. With the increase in gas turbine engine structural complexity and performance over the past 50 years, structural engineers have created an array of safety nets to ensure against component failures in turbine engines. In order to reduce what is now considered to be excessive conservatism and yet maintain the same adequate margins of safety, there is a pressing need to explore methods of incorporating probabilistic design procedures into engine development. Probabilistic methods combine and prioritize the statistical distributions of each design variable, generate an interactive distribution and offer the designer a quantified relationship between robustness, endurance and performance. The designer can therefore iterate between weight reduction, life increase, engine size reduction, speed increase etc.

Brown, Marilyn↗