SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Sustained emission of low energy solar particles with a composition richer in iron than oxygen is observed in the time period 1974 May 7 to 17. Between 0.7 and 4 MeV/nucleon the relative abundances of C:O:Fe are 0.24:1:1.35. It was suggested that these observations provide indication for effects of heavy ion enrichment in the lower corona of the sun.
Sustained emission of low-energy solar particles with a composition richer in iron than oxygen has been observed during the time period May 7-17, 1974. Between 0.7 and 4 MeV per nucleon the relative abundances of C:O:Fe are 0.65:1:1.35. We suggest that these observations provide an indication of the effects of heavy-ion enrichment in the lower corona of the sun.
To investigate the possibility of inadvertent weather modification from rocket effluent, aerosol samples were collected from an instrumented aircraft subsequent to the Voyager 1 and 2 launches. The aerosol's morphology, concentration, and size distribution were examined with an electron microscope. The elemental compositions of individual particles were analyzed with an X-ray energy spectrometer. Ice nucleus concentration was measured with a thermal diffusion chamber. The particles' physical and chemical properties were related to their ice nucleation activity. A laboratory experiment on rocket propellant exhaust was conducted under controlled conditions. Both laboratory and field experimental results indicated that rocket propellant exhaust can produce active ice nuclei and modify local weather in suitable meteorological conditions.
The state of our current knowledge of the properties of the ring system as a whole, and of the particles individually, is assessed. Attention is primarily devoted to recent results and possibilities for exploration of the ring system by a Saturn orbiter. In particular, the infrared and microwave properties of the ring system are discussed. The behavior of the ring brightness is not well understood in the critical transition spectral region from approximately 100 micrometers to approximately 1 cm. Also, the dynamical behavior of the ring system is discussed. Recent theoretical studies show that ongoing dynamical effects continually affect the ring structure in azimuth (possibly producing the A ring brightness asymmetry) and in the vertical direction. Orbital spacecraft-based studies of the rings will offer several unique advantages and impact important cosmogonical questions. Bistatic radar studies and millimeter-wavelength spectrometer/radiometry will give particle sizes and composition limits needed to resolve the question of the density of the rings, and provide important boundary conditions on the state of Saturn's protoplanetary nebula near the time of planetary formation.
The probable microphysics of a cloud is deduced by a described method which requires information on cloud particle mean size, composition, number density, and atmospheric structure, but does not require any additional information. The analysis is applied to the sulfuric acid clouds of Venus, the water ice and dust clouds of Mars, and the ammonia-water and ammonia ice clouds of Jupiter. The Venus cloud layer is found to have some resemblance to smog and haze layers on earth. The water ice clouds on Mars resemble tenuous nonprecipitating cirrus clouds on earth. Precipitation, vertical distribution of gases, and vertical transport of heat in the clouds on Jupiter are considered.
Particulate samples collected on six stages of a quartz crystal microbalance cascade impactor mounted in an aircraft traversing the plume of a large solid-fueled rocket are analyzed, postflight, by scanning electron microscopy (SEM) and energy dispersed X-ray (EDXRA). The results indicate the morphology and elemental composition of the particles fall into several distinct groups. Those larger than about 0.5 micron in diameter and nearly spherical in shape contain, among elements with atomic numbers of 11 and higher, only aluminum, suggesting they are aluminum oxide formed in the solid rocket fuel combustion. Still larger but less symmetrical particles contain only sodium and chlorine. Particles much smaller than 0.5 micron seem to end up as agglomerates after impaction (or during the impaction process), and show a complex elemental make-up of Na, Al, S, Cl, K, Ca, Fe and Zn. The unagglomerated single particles smaller than 0.2 micron, on the other hand, show no evidence of elements above atomic number 11 at all, suggesting they may be carbon or hydrocarbon particles.
To investigate the possibility of inadvertent weather modification from rocket effluent, aerosol samples were collected from an instrumented aircraft subsequent to the Voyager I and II launches. The aerosol's morphology, concentration and size distribution were examined with an electron microscope. The elemental compositions of individual particles were analyzed with an X-ray energy spectrometer. Ice nucleus concentration was measured with a subfreezing thermal diffusion chamber. The particles' physical and chemical properties were related to their ice nucleation activity. A laboratory experiment on rocket propellant exhaust was conducted under controlled conditions. Both laboratory and field experimental results indicated that rocket propellant exhaust can produce active ice nuclei. Their consequences for potential inadvertant weather modification demand additional study.
Online spectrometer monitors composition of individual aerosol particles. Single aerosol particles up to about 5 microns in diameter are analyzed for chemical composition, yielding valuable information on nature of pollution source. Tests show system has promise for monitoring oxidation of sulfur dioxide to sulfates important in controlling pollution from coal-fired power plants.
The tribological properties of seven polyimide films applied to 440 C high temperature stainless steel substrates were studied at 25 C with a pin-on-disk type of friction and were apparatus. The polyimides fell into two groups according to friction and wear properties. Group I polyimides had slightly lower friction but much higher wear than group II polyimides. The wear mechanism was predominately adhesion, but the wear particles were larger for group I polyimides. For most of the polyimides the transfer films consisted of clumps of compacted wear particles. One polyimide composition produced a very thin transfer film that sheared plastically in the contact area.
Laboratory photochemical simulations and other types of chemical simulations are discussed. The chemistry of methane, which is the major known constituent of Titan's atmosphere was examined with stress on what can be learned from photochemistry and particle irradiation. The composition of dust that comprises the haze layer was determined. Isotope fractionation in planetary atmospheres is also discussed.
Estimates are made showing that, as a consequence of rocket activity in the earth's upper atmosphere in the Shuttle era, average ice nuclei concentrations in the upper atmosphere could increase by a factor of two, and that an aluminum dust layer weighing up to 1000 tons might eventually form in the lower atmosphere. The concentrations of Space Shuttle ice nuclei (SSIN) in the upper troposphere and lower stratosphere were estimated by taking into account the composition of the particles, the extent of surface poisoning, and the size of the particles. Calculated stratospheric size distributions at 20 km with Space Shuttle particulate injection, calculated SSIN concentrations at 10 and 20 km altitude corresponding to different water vapor/ice supersaturations, and predicted SSIN concentrations in the lower stratosphere and upper troposphere are shown.
In order to study the access of solar wind ions to the magnetosphere, together with the processes that transport and accelerate magnetospheric particles, the Active Magnetospheric Particle Tracer Explorers (AMPTE) mission will release and monitor lithium and barium tracer ions in both the solar wind and the magnetosphere. A single, massive release of barium in the dawn magnetosheath will in addition create a visible artificial comet in the flowing solar wind plasma, within which studies of a range of different plasma effects will be undertaken. The AMPTE will obtain comprehensive measurements of natural magnetospheric particle populations' elemental composition and dynamics. AMPTE comprises three spacecraft: the Ion Release Module, the Charge Composition Explorer, and the United Kingdom Subsatellite.
An abrasion chamber was constructed to produce grain to grain impacts and to eliminate, as far as possible, grain to wall impact. Quartz, basalt, olivine, and volcanic ash were used as abrasives to determine particle longevity on Mars during eolian abrasion. The various abrasion velocities, measured velocity or particles, calculated velocity of collision, time during which abrasion took place, the charge (material) in grams, and the percent remaining after completion are tabulated. The tests show that if coarse sand-sized particles of the composition presumably present on Mars are moved at the wind velocities given, almost complete destruction can occur in geologically insignificant time periods. Grain to rock collisions are not necessary for almost complete destruction; grain to grain collisions are sufficient.
The first direct measurement of the ionic charge distribution of the helium isotopes and of iron in (He-3)-Fe-rich solar energetic particle events is reported. No significant contribution of singly ionized helium to the events is found. The two-sigma upper limits for the He-3(+)/He-3(2+) and He-4(+)/He-4(2+) ratios are 0.02 and 0.03, respectively. The mean charge state of iron found by averaging five (He-3)-Fe-rich solar energetic particle events is 19 + or -2, significantly larger than the iron charge state for energetic solar particles in normal composition events. These results appear to favor the resonant heating model proposed by Fisk (1978). It is concluded that temperatures in the source region exceed 5 million K in the events under study.
The spectral properties (0.35-2.20 microns) of submicron powders of hematite, maghemite, magnetite, goethite, and lepidocrocite are determined. Other physicochemical data are obtained for the powders in order to determine if deviations from stoichiometry occur due to their small particle size, to determine their state of chemical and phase purity, and to determine the physical characteristics of the individual powders. The physicochemical data obtained include mean particle diameter, discrete particle shape, chemical composition, crystallographic phase, magnetic parameters, and Moessbauer parameters. The positions of the spectral features for the hematite, maghemite, and magnetite powders are independent of temperature over the interval between about +20 and -110 C. For the goethite and lepidocrocite powders, a small shift of about 0.02 micron to shorter wavelengths is observed for some of the features after cooling to about -110 C. The spectral properties of the iron oxides and oxyhydroxides are important not only for understanding the basic physics and chemistry of the compounds but also for applications such as the remote sensing of the earth and Mars.
A variety of physical processes can erode the surfaces of planetary ring particles. According to current estimates, the most efficient of these over the bulk of Saturn's rings is hypervelocity impact by 100 microns to one centimeter radius meteoroids. The atoms, molecules, and fragments ejected from ring particles by erosion arc across the rings along elliptical orbits to produce a tenuous halo of solid ejecta and an extensive gaseous atmosphere. Continuous exchange of ejecta between different ring regions can lead to net radial transport of mass and angular momentum. The equations governing this ballistic transport process are presented and discussed. Both numerical and analytic studies of idealized ring systems illustrate that ballistic transport can cause significant mass redistribution in the rings, especially near regions of high density contrast, such as the inner edges of the A and B rings. Ejecta exchanges can also alter local particle sizes and compositions and may produce pulverized regoliths at least several centimeters deep. The meteoroid erosion rate is so high that significant global torques and mass loss are possible on times shorter than a solar system life time.
The AMPTE/CCE (active magnetospheric particle tracer explorer/charge composition explorer) magnetic-field observations acquired during the September 4, 1984 geomagnetic storm are described. The observations are used to determine magnetospheric regions and boundaries and are also used as the primary index of the development, evolution, and distribution of the ring current. The results of an analysis of the observations are presented. It is shown that a magnetic compression observed inside the magnetosphere by CCE and outside by ISEE-2 is interpreted as a sudden impulse. From an estimation of magnetopause normals at each crossing, it is concluded that the magnetic variations that occur are due to a contraction and expansion of the entire magnetosphere. Local magnetic-field depressions are observed during two inbound dusk passes, confirming that the ring current never developed in the dawn sector.
A dust experiment which combines measurements of the elemental and isotopic composition of individual particles with orbital information would contribute fundamental, new scientific information on the sources contributing to the micrometeoroid population. The general boundary conditions for such a system are: (1) it must be capable of measuring velocities in the range of 10 km/sec to 100 km/sec with several percent accuracy; (2) it must collect particles in such a way that the debris atoms are locally concentrated so that precise isotopic measurements are possible; (3) it should collect particles over a wide range of sizes starting with a lower limit of 10 microns; (4) it should incorporate materials that will not compromise the isotopic measurements; and (5) it should be large enough to obtain statistically meaningful results within a reasonable exposure time. Techniques which may satisfy these conditions are described.