Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cleaning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Carbon Ore-Derived Critical Materials for Clean Energy Technologies

Conference presentation at American Institute of Chemical Engineers (AIChE) Annual Meeting, San Diego, California, October 27–31, 2024. Trends in the manufacture of electric vehicles that use graphite-based LIBs are rising steeply in the United States and globally, but the U.S. domestic supply chains for graphite, the largest component in an LIB by mass, is severely limited and faces complicated geopolitical dynamics with foreign sources. Consequently, the United States has designated graphite as a critical mineral to focus attention and resources to develop technologies to meet the challenge of limited domestic graphite supply chains. Results obtained so far based on the UCOP process have successfully validated the technology at the laboratory scale, with the produced graphite material showing up to 95% degree of graphitization, high carbon purity of ~99.98%, residual ash content of ≤0.02%, negligible moisture, low trace elements, and high electrochemical stability. These results suggest that the emerging UCOP technology is a promising approach to effectively synthesize high-quality graphite from abundant coal and coal waste resources in the United States to create a sustainable domestic critical graphite supply chain. A brief description of the status of UCOP process development and representative results will be presented.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

TEAMER – Harvesting Subsea Water Motion to Provide Clean Electrical Power (Abstract)

Power generation from vortex induced vibration (VIV) is an emerging field with new technologies that are just beginning to be field tested. In this TEAMER project, WITT Energy will be field testing the power production of its pendulum system in two different configurations to evaluate its performance. The amount of power produced by a VIV instrument depend on the frequency at which it vibrates. The vibrational frequency is controlled by the device shape and its interaction with the flow velocity. Computer models are used to predict vibration frequencies as a function of flow velocity but they may be inaccurate due to complicated bathymetry and bottom roughness that is not captures by the models. This project will test the WITT VIV device in the Sequim Bay channel over a range of tidal velocities. Two tests will be completed with different pipe lengths that are expected to vary the vibrational frequency and therefore the power produced. PNNL will use an acoustic doppler current profiler (ADCP) to monitor the flow conditions during the tests. These tests will help WITT Energy evaluate how closely field operations follow computer model predictions and how best to configure their device for electricity production.

16 TIDAL AND WAVE POWER↗
DOE OSTI2024

Clean Energy to Communities: Technical Assistance for Region Five, MN

The Region Five Development Commission (“R5DC”) serves five counties in Minnesota, USA and received an Energizing Rural Communities Prize through the U.S. Department of Energy. Currently, R5DC is piloting projects in the City of Motley, for which two energy audits have been conducted. R5DC is seeking input regarding which options to pursue based on these two audits, as well a framework for future audits to be as effective and helpful as possible. This report defines a framework for future audits for R5DC, by providing an overview of the requirements for different levels of audits and identifying available resources for conducting energy audits.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2026

Procurement Analysis Tool (PAT) Informational Webinar for Clean Energy States Alliance

This is a slide deck for the Procurement Analysis Tool and the deck published in August 2025. This webinar is a part of the PAT roadshow and we are presenting it in different forums and to different audience. https://research-hub.nrel.gov/en/publications/procurement-analysis-tool-pat-informational-webinar

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Clean Energy Roadmap: From Reconstruction to Decarbonization in Ukraine

The Net Zero World Initiative, committed to accelerating decarbonization and fostering more inclusive, equitable, and resilient energy systems, is pleased to support the Government of Ukraine in developing decarbonization pathways for its energy sector. In a collaborative effort to promote the resilience and sustainability of the energy system as part of the country’s reconstruction, the leading US Department of Energy’s national laboratories and distinguished Ukrainian research institutes and think tanks worked on this study. Together, we have developed scenarios for achieving net zero emissions in the energy sector, which are in line with the goals set out in the Energy Strategy of Ukraine through 2050. The Ministry of Energy of Ukraine report will present this report at the Conference of the Parties (COP28).

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2026

Mechanistic Tuning of Chemical Transformations for Coupling the Geo-mimicry of Acid Gas Storage with Design Strategies to Produce Clean Energy Carriers in Multi-Phase Reaction Environments (MATTER) (Final Report)

The need to diversify approaches to produce essential energy carriers such as H 2 motivate advances in thermodynamically downhill geo-inspired pathways. Currently, more than 80% of hydrogen is produced via steam methane reforming (SMR) followed by water gas shift reaction (WGSR) pathway with the co-production of CO 2 . As an alternative to introducing CO 2 separation strategies downstream such as the use of membranes, solvents, or sorbents, geo-inspired carbon mineralization is harnessed as an alternative crystallization pathway. The thermodynamically downhill carbon mineralization pathways are hypothesized to accelerate H2 conversion while separating CO 2 . The work conducted through this project discusses the mechanisms associated with coupling the water gas shift reaction (WGSR) with carbon mineralization. In addition to harnessing Ca- and Mg-bearing oxides or hydroxides that are known to be reactive for CO 2 capture, the use of earth abundant silicate minerals such as Ca- and Mg-bearing silicates, is also investigated. Key outcomes include approaches to architect Mg-silicate with well-controlled pore size distributions, probing the enhancement in H 2 yield with inherent CO 2 suppression using Ca- and Mg-bearing oxides, hydroxides, and silicates, elucidating the changes in silicate chemistry during carbon mineralization, and exploring direct integration of carbon mineralization with WGSR and the development of separate low temperature pathway for reactive CO 2 capture and mineralization are developed.

08 HYDROGEN↗
DOE OSTI2025

Harvesting Subsea Water Motion to Provide Clean Electrical Power

This TEAMER project had three main objectives related to characterizing the performance of a vortex-induced vibration (VIV) marine energy harvesting device called the Whatever Input To Torsion (WITT). The first was to characterize the motion of the WITT device as it vibrates on top of a pipe in a natural tidal flow. The second was to measure how much electricity the WITT device generates when it is deployed on top of a pipe that is secured to the seabed with a lander. The third objective was to measure how much electricity the WITT device generates in the same configuration but with a longer pipe. This TEAMER project succeeded in satisfying the first objective by measuring the motion of the WITT device with an inertial measurement unit (IMU) mounted in the WITT housing. The motion was described by examining changes in the acceleration, pitch, roll, and yaw, and displacement. The frequency of the motion was characterized using spectral analysis. The TEAMER project succeeded in reaching the second objective by measuring the power produced by the WITT. It is reported here as the average and maximum power in hourly intervals. WITT Energy decided to not have us pursue the third objective of testing a longer pipe because the first test was unexpectedly successful at having the system vibrate at the target frequency. A longer pipe would have resulted in a decreased frequency and therefore not have been a useful test. Based on these findings, the decision was made to keep the same pipe length for both tests and improve on other aspects of the test structure that had failed during the first test. The key finding of this TEAMER project is that the WITT is capable of generating electricity in moderate flow speeds when it is in a housing that is attached to a 2.5 m pipe and secured to the seabed by a lander. This report contains the first power values for a VIV instrument that generates electricity from a pendulum swinging at the top of a long pipe. The experiment demonstrated that the vibration frequency of the device varied with the tidal current speed, which changed throughout a given tidal cycle. This meant that the desired peak frequency was not sustained for more than one hour. The success of this TEAMER test provides evidence that continued research in the area of electricity generation from VIV holds promise as a source of marine energy for offshore applications. Future tests should focus on refining the pipe length equations and improving the power take off system of the WITT power electronics. In addition, experiments aimed at expanded testing and evaluation (e.g. longer than one month) are needed to measure the power production at higher tidal current speeds and test the system's durability.

Branch, Ruth A. (ORCID:0000000202356719)↗
DOE OSTI2022

Ammonia Hydrogen Ignition Measurements for Clean Aircraft Propulsion

In the current study, the oxidation of ammonia with hydrogen as well as ammonia with Natural Gas was carried out in order to study the ignition delay times behind reflected shock waves to refine chemical kinetic models. Experiments were carried out in the University of Central Florida’s shock tube facility by utilizing chemiluminescence to obtain OH* emission. Experimental results were then compared with the mainstay GRI 3.0 mechanism, as well as the proprietary UCF 2022 mechanism. Results indicate that for hydrogen/ammonia mixtures, GRI 3.0 overpredicts experimental values while UCF 2022 aligns well at low temperatures but shows variance at high temperature conditions. For hydrogen/Natural Gas mixtures, neither mechanism is able to accurately predict the experimental ignition delay times. The UCF 2022 mechanism is currently being adjusted based on a sensitivity study that was carried out and the experimental results so that it will be able to capture the ignition behavior of hydrogen-carrying compounds during combustion. Experiments are currently being planned in order to extend the pressure and temperature range.

Baker, Jessica↗
DOE OSTI2025

A Novel Optical Instrument for On-Line Measurement of Particle Size Distribution—Application to Clean Coal Technologies

A flow cell is a critical measurement interface for many optical instruments. However, the flows are often sampled under harsh conditions, such as under high pressure and/or high temperature, in the presence of particles, moisture, vapors with high dew points or corrosive gases. Therefore, obtaining a high-optical-quality flow cell that does not perturb the measurement is a significant challenge. To address this challenge, we proposed a new flow cell that employs a unique laminar coaxial flow field (for the purge and sample flows). A test system was built to conduct particle size distribution (PSD) measurements with no sampling bias using a state-of-the-art analyzer (Malvern Panalytical Insitec). The results revealed that the measurement zone is well defined solely by the sample flow, and the optical windows are well protected by the purge flow, with minimal risk of any depositions from the sample flow. Using this flow cell, the Insitec can successfully measure PSD under high pressure and temperature under moist, corrosive conditions without generating any sampling bias. Importantly, we successfully applied this flow cell for on-line PSD measurement for the flue gas of a 100 kWth pressurized oxy-coal combustor operating at 15 bara.

Cheng, Mao (ORCID:0000000213273900)↗
DOE OSTI2021

Cleaning Images with Gaussian Process Regression

Many approaches to astronomical data reduction and analysis cannot tolerate missing data: corrupted pixels must first have their values imputed. This paper presents astrofix, a robust and flexible image imputation algorithm based on Gaussian process regression. Through an optimization process, astrofix chooses and applies a different interpolation kernel to each image, using a training set extracted automatically from that image. It naturally handles clusters of bad pixels and image edges and adapts to various instruments and image types. For bright pixels, the mean absolute error of astrofix is several times smaller than that of median replacement and interpolation by a Gaussian kernel. We demonstrate good performance on both imaging and spectroscopic data, including the SBIG 6303 0.4 m telescope and the FLOYDS spectrograph of Las Cumbres Observatory and the CHARIS integral-field spectrograph on the Subaru Telescope.

42 ENGINEERING↗
DOE OSTI2020

Sandwich gasification process for high-efficiency conversion of carbonaceous fuels to clean syngas with zero residual carbon discharge

The present invention discloses a gasifier and/or a gasification process that provides a long, uniform temperature zone in the gasifier, regardless of the particle size, chemical composition, and moisture content of the fuel by sandwiching a reduction zones between two oxidation zones. The gasifier and/or gasification process has a char that is more energy-dense and almost devoid of moisture that affords for an additional (or char) oxidation zone with a temperature that is higher than a first oxidation zone which is closer to a evaporation and devolatilization zone. As such, the additional (or char) oxidation zone contributes to augmenting the reduction zone temperature, thereby providing a favorable dual impact in improving syngas composition and near-complete conversion of the tar.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Co-Optimization of Fuels & Engines: Scientific Innovation for Efficient, Clean, and Affordable Transportation

An overview of the Co-Optimization of Fuels and Engines Initiative that is bringing together top scientists, engineers, and analysts from nine national laboratories with university and industry partners across the country to investigate fuels and engines as dynamic design variables that can work together to boost efficiency and performance, while minimizing emissions.

bioenergy, biofuels, consortium, conversion↗
DOE OSTI2020

Unprecedented Analysis of LA’s Clean Energy Transformation

Jurisdictions like the City of Los Angeles are boldly establishing ambitious energy objectives—and NREL can be a key partner in informing these transitions.The City of Los Angeles is one of several U.S. local governments setting monumental, measurable goals to transform their energy economies. At the direction of its City Council, LA has embarked on a plan to modernize its electricity system infrastructure—aiming for a 100% renewable energy supply by 2045, along with aggressive electrification targets for buildings and vehicles.

LA100↗