Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Charging Behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Small-𝑥 behavior in QCD from maximal entanglement and conformal invariance

Recent evidence suggests that, at small Bjorken 𝑥, QCD evolution drives the proton into a state of maximal entanglement. If the evolution kernel is assumed to be conformally invariant—as is the case for the Balitsky-Fadin-Kuraev-Lipatov equation—we can describe it by a conformal field theory. Moreover, the central charge 𝑐 of the corresponding conformal field theory emerges as the key parameter governing the 𝑥 dependence of both the entanglement entropy and the structure function. Here we apply the exact Bethe ansatz methods to the quantum spin chain dual to Lipatov’s high energy effective action to extract the central charge of the theory, and find that 𝑐 = 1. This implies the ∼𝑥 −1/3 small 𝑥 behavior for the structure function—the prediction that can be tested at the forthcoming Electron-Ion Collider.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Modeling the electrochemical behavior and interfacial junction profiles of bipolar membranes at solar flux relevant operating current densities

A 1-dimensional, multi-physics model that accounts for the migration and diffusion of solution species, electrostatics, and chemical reactions, in particular water dissociation (WD), at bipolar membrane (BPM) interfaces was developed to study the electrochemical behavior of bipolar membranes (BPMs) at solar flux relevant operating current densities (tens of mA cm -2 ). Significant partial current densities for WD were observed at BPM voltages much less than the equilibrium voltage, e.g., 59 mV × ΔpH from both experiments and modeling. The co-ion leakage across the BPM at pH differentials accounted for the early presence of the partial current density for WD. Two distinctive electric field dependent WD pathways, the un-catalyzed pathway and the catalyzed pathway, were quantitatively and parametrically studied to improve the turn-on potential of the BPM. The catalyzed pathway accounted for the majority of the partial current density for WD at low voltages, while the un-catalyzed pathway dominated the WD at relatively high voltages. Significant WD was observed only within the interfacial CL (<5 nm), in which a large electric field was present. To improve the electrochemical behavior and the turn-on potential of BPMs, the impacts of the pKa of the immobilized WD catalysts, the electric-field dependent rate constant, the thickness of the catalyst layer and fixed charge density in BPMs on the partial current densities for WD were studied systematically. In addition, the electrochemical behavior and concentration profiles of BPMs in a buffered electrolyte were studied and contrasted with those in an un-buffered electrolyte from both modeling and experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Theory of tunneling between two-dimensional electron layers driven by spin pumping: Adiabatic regime and beyond

Tunneling spectroscopy between parallel two-dimensional (2D) electronic systems provides a powerful method to probe the underlying electronic properties by measuring tunneling conductance. Here, in this work, we present a theoretical framework for spin transport in 2D-to-2D tunneling systems, driven by spin pumping. This theory applies to a vertical heterostructure where two layers of metallic 2D electron systems are separated by an insulating barrier, with one layer exchange coupled to a magnetic layer driven at resonance. Utilizing a nonperturbative Floquet-Keldysh formalism, we derive general expressions for the tunneling spin and charge currents across a broad range of driving frequencies, extending beyond the traditional adiabatic pumping regime. At low frequencies, we obtain analytical results that recover the known behaviors in the adiabatic regime. However, at higher frequencies, our numerical findings reveal significant deviations in the dependence of spin and charge currents on both frequency and precession angle. This work offers fresh insights into the role of magnetization dynamics in tunneling transport, opening up new avenues for exploring nonadiabatic spin pumping phenomena.

Green's function methods↗
DOE OSTI2022

Fluorinated Rocksalt Cathode with Ultra‐high Active Li Content for Lithium‐ion Batteries

Abstract The key to increasing the energy density of lithium‐ion batteries is to incorporate high contents of extractable Li into the cathode. Unfortunately, this triggers formidable challenges including structural instability and irreversible chemistry under operation. Here, we report a new kind of ultra‐high Li compound: Li 4+ x MoO 5 F x (1≤ x ≤3) for cathode with an unprecedented level of electrochemically active Li (>3 Li + per formula), delivering a reversible capacity up to 438 mAh g −1 . Unlike other reported Li‐rich cathodes, Li 4+ x MoO 5 F x presents distinguished structure stability to immunize against irreversible behaviors. Through spectroscopic and electrochemical techniques, we find an anionic redox‐dominated charge compensation with negligible oxygen release and voltage decay. Our theoretical analysis reveals a “reductive effect” of high‐level fluorination stabilizes the anionic redox by reducing the oxygen ions in pure‐Li conditions, enabling a facile, reversible, and high Li‐portion cycling.

Pei, Yi↗
DOE OSTI2024

3D Printing of Aqueous Two-Phase Systems with Linear and Bottlebrush Polyelectrolytes

In this study, we formed core–shell-like polyelectrolyte complexes (PECs) from an anionic bottlebrush polymer with poly (acrylic acid) side chains with a cationic linear poly (allylamine hydrochloride). By varying the pH, the number of side chains of the polyanionic BB polymers (Nbb), the charge density of the polyelectrolytes, and the salt concentration, the phase separation behavior and salt resistance of the complexes could be tuned by the conformation of the BBs. By combining the linear/bottlebrush polyelectrolyte complexation with all-liquid 3D printing, flow-through tubular constructs were produced that showed selective transport across the PEC membrane comprising the walls of the tubules. These tubular constructs afford a new platform for flow-through delivery systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Keratin-derived functional carbon with superior charge storage and transport for high-performance supercapacitors

In this work, we report a scalable method to synthesize hierarchically porous, hetero-atom doped activated carbon nanosheet from waste biomass-human hair, and demonstrates the use of this carbon as an ultra-high performance electrode material for supercapacitor applications. Microscopic analyses reveal that sheet size ranges from 50 to 200 nm having a thickness of 15–27 nm. As-synthesized, carbon nanosheets possess a hierarchical porous structure having a specific surface area of 1548 m 2 g -1 . Heteroatom concentration (nitrogen, oxygen, and sulfur) of around 25% is confirmed from XPS analysis. Therefore, the novel interconnected hierarchical porous nanosheets structure enables fast adsorption and transportation of ions during electrochemical processes. Also, the abundant chemically available electroactive heteroatom species in the material enhance the wettability of ions and contribute to pseudocapacitance. The electrochemical analyses through cyclic voltammetry and galvanostatic charge-discharge measurements in 6 M KOH reveal the quasi-EDLC behavior of the activated carbons due to the presence of heteroatoms. A reprensentative KOH activated carbon shows an excellent specific capacitance value of 999 F g -1 at a current density of 1 A g -1 . Furthermore, the symmetrically assembled two-electrode device also delivers a maximum energy density of 32 W h Kg -1 at a power density of 325 W Kg -1 . In addition, excellent cyclic stability of 98% capacitance retention is observed after 10,000 continuous GCD cycles even at a high current density of 5 A g -1 . Symmetric flexible supercapacitor device using KOH-PVA-K3FeCN6 as redox gel polymer electrolyte shows a synergistic specific capacitance of 145 mF cm -1 at a current density of 0.8 mA cm -1 exhibiting very less deviation in bending mode. Therefore, this waste biomass derived heteroatom doped hierarchical porous carbon nanosheets can be a promising material for cost-effective high- performance supercapacitor.

42 ENGINEERING↗
DOE OSTI2023

Quantifying the impact of operating temperature on cracking in battery electrodes, using super-resolution of microscopy images and stereology

There are numerous factors that can have an impact on the degradation behavior of batteries, such as the number of recharge cycles or the charge rate. Here, we investigate the influence of operating temperature on the structural degradation of the microstructure in lithium-ion positive electrodes. For that purpose, the microstructure is characterized for cathodes which have been cycled for 200 cycles under 6C (10-minute) charging at different operating temperatures, namely, 20°C, 30°C, 40°C, and 50°C. For each operating condition scanning electron microscopy (SEM) images of cross-sectioned Li x Ni 0.5 Mn 0.3 Co 0.2 O 2 (NMC532) electrodes have been analyzed, to determine structural descriptors such as global particle porosity, crack size/length/width distribution, and porosity and specific surface area distribution of individual particles. Additionally, a stereological method has been deployed to investigate the local particle porosity as a function of distance to the particle center. Results show that particle porosity increases with increasing cycling temperature. Particle porosity is greatest at the particle center and decreases along the particle radius to the exterior. Particle surface area is similar across the four cycling-temperature aging conditions.

25 ENERGY STORAGE↗
DOE OSTI2023

High-rate, high-capacity electrochemical energy storage in hydrogen-bonded fused aromatics

Designing materials for electrochemical energy storage with short charging times and high charge capacities is a longstanding challenge. The fundamental difficulty lies in incorporating a high density of redox couples into a stable material that can efficiently conduct both ions and electrons. We report all-organic, fused aromatic materials that store up to 310 mAh g –1 and charge in as little as 33 s. This performance stems from abundant quinone/imine functionalities that decorate an extended aromatic backbone, act as redox-active sites, engage in hydrogen bonding, and enable a delocalized high-rate energy storage with stability upon cycling. Here, the extended conjugation and hydrogen-bonding-assisted bulk charge storage contrast with the surface-confined or hydration-dependent behavior of traditional inorganic electrodes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Probing Operando Electrochemical Strain Generation in α-NaFeO 2 Composite Cathodes during Cycling of Na-Ion Batteries

The transition metal oxide (TMO) cathodes in Na-ion batteries suffer from low-capacity retention. Chemo-mechanical instabilities lead to the deterioration of the electrochemical performance of TMO cathodes in Li-ion batteries. However, there is not much known about the chemo-mechanical instabilities in the TMO cathodes for Na-ion batteries. Understanding the governing forces behind the interplay between the electrochemical performance and mechanical stability in TMO cathodes is critical for the development of Na-ion batteries. Here, we synchronize the digital image correlation (DIC) technique with electrochemical analysis to capture the real-time deformation behavior of the α-NaFeO 2 cathodes during cycling. When the charge cutoff voltage is 3.6 V, the cathode experiences reversible deformations (except for the first cycle). There is negative strain (shrinkage) generation during Na extraction and positive strain (expansion) generation during the subsequent Na insertion. A detailed analysis of the potential-dependent strain rate evolution points out complicated phase transformations and nonequilibrium conditions in the α-NaFeO 2 cathodes during cycling. When the charge cutoff voltage was increased to 4.2 V, there was a rapid capacity loss and large plastic deformations in the α-NaFeO 2 cathodes. We provide an in-depth discussion about the possible mechanisms behind the chemo-mechanical instabilities in the α-NaFeO 2 . In conclusion, the correlation is critical to develop material-based strategies to mitigate instability mechanisms in TMO cathodes for Na-ion batteries.

Wable, Minal [University of Maryland Baltimore Cou↗
DOE OSTI2024

Electrical Responses of Modified Mineral Surfaces as Observed With Spectral Induced Polarization and Atomic Force Microscopy

Abstract Atomic force microscopy (AFM) and spectral induced polarization (SIP) are widely used to investigate the electrical properties of mineral surfaces at vastly different scales of measurement. We compare AFM and SIP measurements made on two different materials (glass beads and silica gel) subjected to etching, deposition of iron oxide particles, and inclusion of calcite grains. We found that the treatments produced qualitatively consistent behaviors in the AFM and SIP data. Direct AFM measurements of surface charge density for silica and calcite surfaces were quantitatively compared to values estimated from the SIP results using a grain polarization model. No statistically significant difference (at a 95% confidence level) was found between the surface charge density of silica estimated by AFM (2.3 ± 6.6 mC/m 2 for glass beads and 1.6 ± 0.1 mC/m 2 for silica gel) versus SIP (5.4 ± 4.4 mC/m 2 for glass beads and 1.6 ± 0.5 mC/m 2 for silica gel). The surface charge density for calcite determined by AFM (43.5 ± 12.9 mC/m 2 ) was approximately 19 times higher than that found for silica. While the charge density of calcite surfaces determined by SIP was also generally higher than that found for silica, different treatments produced significantly different values between 4.7 and 258 mC/m 2 (with a maximum 95% CI of ±8.7 mC/m 2 ). Several possible explanations exist for the range of the observed SIP measurements, including aging of the calcite surfaces. Overall, this study suggests the potential for the complementary use of AFM and SIP measurements to constrain future investigations of polarization mechanisms in porous media.

Geochemistry & Geophysics↗
DOE OSTI2020

Protonic solid-state electrochemical synapse for physical neural networks

Physical neural networks made of analog resistive switching processors are promising platforms for analog computing. State-of-the-art resistive switches rely on either conductive filament formation or phase change. These processes suffer from poor reproducibility or high energy consumption, respectively. Herein, we demonstrate the behavior of an alternative synapse design that relies on a deterministic charge-controlled mechanism, modulated electrochemically in solid-state. The device operates by shuffling the smallest cation, the proton, in a three-terminal configuration. It has a channel of active material, WO 3 . A solid proton reservoir layer, PdH x , also serves as the gate terminal. A proton conducting solid electrolyte separates the channel and the reservoir. By protonation/deprotonation, we modulate the electronic conductivity of the channel over seven orders of magnitude, obtaining a continuum of resistance states. Proton intercalation increases the electronic conductivity of WO 3 by increasing both the carrier density and mobility. This switching mechanism offers low energy dissipation, good reversibility, and high symmetry in programming.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Encoding multistate charge order and chirality in endotaxial heterostructures

Abstract High-density phase change memory (PCM) storage is proposed for materials with multiple intermediate resistance states, which have been observed in 1 T -TaS 2 due to charge density wave (CDW) phase transitions. However, the metastability responsible for this behavior makes the presence of multistate switching unpredictable in TaS 2 devices. Here, we demonstrate the fabrication of nanothick verti-lateral H -TaS 2 /1 T -TaS 2 heterostructures in which the number of endotaxial metallic H -TaS 2 monolayers dictates the number of resistance transitions in 1 T -TaS 2 lamellae near room temperature. Further, we also observe optically active heterochirality in the CDW superlattice structure, which is modulated in concert with the resistivity steps, and we show how strain engineering can be used to nucleate these polytype conversions. This work positions the principle of endotaxial heterostructures as a promising conceptual framework for reliable, non-volatile, and multi-level switching of structure, chirality, and resistance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Space Charge Forces analytical model for emittance compensation

Space charge forces represent main induced effects in an RF-injector that degrade the beam quality. In this scenario the laser distribution sent on the photocathode acquires an important role in the emittance compensation process, as the slice analysis shows. Starting from the preliminary studies performed on [1], a novel semi-analytical model of space charge forces is proposed in detail for bunch with arbitrary charge distribution to derive expressions of self-induced forces. The performance of the fields at low energy regime (as the field has not expired RF forces) is under present analysis, we can investigate use of this model in low charge regime. Further, the model has been bench-marked with the behavior of the distributions present in the literature and studied for new ones. It has also been applied for the study of the optimization of a C-band hybrid photoinjector now being commissioned, thus explaining the factor two reduction of the emittance observed at the exit of the gun by changing the initial distribution at the cathode.

Carillo, M.↗
DOE OSTI2022

Collectivity in Ultraperipheral Pb+Pb Collisions at the Large Hadron Collider

In this work, we present the first full (3+1)D dynamical simulations of ultraperipheral Pb+Pb collisions at the Large Hadron Collider. Extrapolating from p + Pb collisions, we explore whether a quasireal photon γ* interacting with the lead nucleus in an ultraperipheral collision can create a many-body system exhibiting fluid behavior. Assuming strong final-state interactions, we provide model results for charged hadron multiplicity, identified particle mean transverse momenta, and charged hadron anisotropic flow coefficients, and compare them with experimental data from the ALICE and ATLAS Collaborations. The elliptic flow hierarchy between p + Pb and γ*+Pb collisions is dominated by the difference in longitudinal flow decorrelations and reproduces the experimental data well. We have demonstrated that our theoretical framework provides a quantitative tool to study particle production and collectivity for all system sizes, ranging from central heavy-ion collisions to small asymmetric collision systems at the Relativistic Heavy-Ion Collider and the Large Hadron Collider and even at the future Electron-Ion Collider.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Aging phenomena in the two-dimensional complex Ginzburg-Landau equation

The complex Ginzburg-Landau equation with additive noise is a stochastic partial differential equation that describes a remarkably wide range of physical systems which include coupled non-linear oscillators subject to external noise near a Hopf bifurcation instability and spontaneous structure formation in non-equilibrium systems, e.g., in cyclically competing populations or oscillatory chemical reactions. Here, we employ a finite-difference method to numerically solve the noisy complex Ginzburg-Landau equation on a two-dimensional domain with the goal to investigate its non-equilibrium dynamics when the system is quenched into the “defocusing spiral quadrant”. We observe slow coarsening dynamics as oppositely charged topological defects annihilate each other, and characterize the ensuing aging scaling behavior. We conclude that the physical aging features in this system are governed by non-universal aging scaling exponents. We also investigate systems with control parameters residing in the “focusing quadrant”, and identify slow aging kinetics in that regime as well. Finally, we provide heuristic criteria for the existence of slow coarsening dynamics and physical aging behavior in the complex Ginzburg-Landau equation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Lattice Clifford fractons and their Chern-Simons-like theory

We use Dirac matrix representations of the Clifford algebra to build fracton models on the lattice and their effective Chern-Simons-like theory. As an example, we build lattice fractons in odd D spatial dimensions and their (D+1) spacetime dimensional effective theory. The model possesses an anti-symmetric K matrix resembling that of hierarchical quantum Hall states. The gauge charges are conserved in sub-dimensional manifolds which ensures the fractonic behavior. The construction extends to any lattice fracton model built from commuting projectors and with tensor products of spin-1/2 degrees of freedom at the sites.

Fontana, Weslei↗
DOE OSTI2020

Mechanism of Electrochemical Oxidation of Nitroxide Radicals in Ethaline Deep Eutectic Solvent

Deep eutectic solvents (DESs) are emerging as promising electrolytes for electrochemical energy storage applications. Electroactive nitroxide-radical-containing organics can be dissolved in DESs to facilitate redox reactions; however, mechanistic know-how of their charge transfer kinetics at the electrode surface is rather limited. Here, we investigate the mechanism underlying the electrochemical oxidation of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) and 4-hydroxy-2,2,6,6-tetramethyl-piperidine-1-oxyl (4-hydroxy-TEMPO). Using polarization measurements on a platinum rotating disk electrode and micro-electrode, we show that the anodic charge transfer coefficient (a) for one-electron transfer oxidations of TEMPO and4-hydroxy-TEMPO approaches 0.9 in DES as well as in aqueous electrolytes, i.e., a significant deviation fromα≈0.5 expected for symmetric redox behavior. To explain this observation, a two-step oxidation mechanism is proposed wherein the nitroxide-containing species undergo fast charge transfer at an electrode surface followed by slow rate-limiting desorption of the adsorbed oxidized species. Numerical simulations are reported to characterize how the proposed two-step mechanism manifests intransient cyclic voltammetry behavior of the 4-hydroxy-TEMPO oxidation reaction, and good agreement with experiments is noted.

25 ENERGY STORAGE↗