SEARCH · Engineering Papers

Results for “CORRELATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Microstructural evolution in the HAZ of Inconel 718 and correlation with the hot ductility test

The nickel-base alloy 718 was evaluated to study the role of preweld heat treatment in reducing or eliminating heat-affected zone hot cracking. Three heat treatments were studied using the Gleeble hot ductility test. A modified hot ductility test was also used to follow the evolution of microstructure during simulated welding thermal cycles. The microstructural evolution was correlated with the hot ductility data in order to evaluate the mechanism of hot cracking in alloy 718. The correlation of hot ductility with microstructure showed that recrystallization, grain growth, and dissolution of precipitates did not in themselves cause any loss of ductility during cooling. Ductility loss during cooling was not initiated until the constitutional liquation of NbC particles was observed in the microstructure. Laves-type phases were found precipitated in the solidified grain boundaries but were not found to correlate with any ductility loss parameter. Mechanisms are reviewed which help to explain how heat treatment controls the hot crack susceptibility of alloy 718 as measured in the hot ductility test.

Thompson, R. G.↗

NASA NTRS1984

Measurements of Doppler shifts by gas correlation spectroscopy

IR gas correlation spectroscopy is a sensitive technique for the measurement of small Doppler shifts in spectra. This technique also exhibits several important advantages over alternative methods in the remote sensing of stratospheric and mesospheric winds from spacecraft. Attention is presently given to laboratory tests demonstrating gas correlation spectroscopy's quantitative measurement of small Doppler shifts in spectra, whose close agreement with theoretical predictions suggests that measurements of the change in the radiant flux through a gas correlation spectrometer can be used to measure the relative velocity between gas and instrument for a moving parcel of gas.

Mccleese, D. J.↗

NASA NTRS1985

Assessment of Thematic Mapper Band-to-band Registration by the Block Correlation Method

Rectangular blocks of pixels from one band image were statistically correlated against blocks centered on identical pixels from a second band image. The block pairs were shifted in pixel increments both vertically and horizontally with respect to each other and the correlation coefficient to the maximum correlation was taken as the best estimate of registration error for each block pair. For the band combinations of the Arkansas scene studied, the misregistration of TM spectral bands within the noncooled focal plane lie well within the 0.2 pixel target specification. Misregistration between the middle IR bands is well within this specification also. The thermal IR band has an apparent misregistration with TM band 7 of approximately 3 pixels in each direction. The TM band 3 has a misregistration of approximately 0.2 pixel in the across-scan direction and 0.5 pixel in the along-scan direction, with both TM bands 5 and 7.

Card, D. H.↗

NASA NTRS1984

On the spatial correlations of Abell clusters

If rich clusters formed where the primordial density enhancement, when averaged over an appropriate volume, was unusually large, then they give a biased measure of the large-scale density correlation function determiend by the probability distribution of the density fluctuations on a rich cluster mass scale. If this distribution was Gaussian, the correlation function is amplified. The amplification for rich clusters is estimated to be eaual about ten and predicted trend of amplification with richness agrees qualitatively with that observed. Some implications of these results for the large-scale density correlations are discussed.

Kaiser, N.↗

NASA NTRS1984

SAR image enhancement via post-correlation signal processing

Seventeen interpreters ranked sets of computer-generated radar imagery to assess the value of post-correlation processing on the interpretability of SAR (synthetic aperture radar) imagery. The post-correlation processing evaluated amounts to a nonlinear mapping of the signal exiting a digital correlator and allows full use of signal bandwidth for improving the spatial resolution or for noise reduction. The results indicate that it is reasonable to hypothesize an optimal SAR presentation format for specific applications even though this study was too limited to be specific.

Matthews, N. D.↗

NASA NTRS1984

Correlations between thermospheric density and temperature, solar EUV flux, and 10.7-cm flux variations

Simultaneously measured thermospheric N2 densities and solar EUV fluxes obtained by the AE-E satellite are compared with ground-based solar 10.7-cm fluxes and calcium plage measurements. Short-wavelength (coronal) EUV emissions correlate better with thermospheric density than the 10.7-cm flux, although the reduction in density residuals is small. Correlation of density with a calcium plage index was somewhat worse than with 10.7. Although the overall correlation of 10.7-cm flux with EUV fluxes is high, the best fit slopes are different for short- and long-term variations, and there are instances where the short-term behavior of various EUV emissions and that of the 10.7-cm flux are distinctly different. For both density and EUV, a two-factor formula based on daily 10.7-cm flux and a running mean of the 10.7-cm flux provides a better fit than using the daily 10.7-cm flux alone.

Hedin, A. E.↗

NASA NTRS1983

Correlation of infrared reflectance ratios at 2.3 microns/1.6 micron and 1.1 micron/1.6 micron with delta O-18 values delineating fossil hydrothermal systems in the Idaho batholith

Reflectance ratios from laboratory spectra and airborne multispectral images are found to be strongly correlated with delta O-18 values of granite rocks in the Idaho batholith. The correlation is largely a result of interactions between hot water and rock, which lowered the delta O-18 values of the rocks and produced secondary hydrous material. Maps of the ratio of reflectivities at 2.3 and 1.6 microns should delineate fossil hydrothermal systems and provide estimates of alteration intensity. However, hydrous minerals produced during deuteric alteration or weathering cannot be unambiguously distinguished in remotely sensed images from the products of propylitic alteration without the use of narrow-band scanners. The reflectivity at 1.6 micron is strongly correlated with rock density and may be useful in distinguishing rock types in granitic terranes.

Gillespie, A. R.↗

NASA NTRS1984

Theoretical study of electron correlation effects in transition metal dimers

Introduction of partially localized orbitals is shown to reduce the number of terms needed to describe the bonding in transition metal clusters. Using this formalism, it is possible to compute the various intra- and inter-atomic electron correlation contributions to the bond energy. Calculations demonstrate the relative importance of several kinds of electron correlation terms involving the 3p, 3d, and 4s electrons. Improved interaction potentials are obtained for the dimers V(2) and Cr(2) when additional correlation is added to the CAS SCF results of Walch, Bauschlicher, Roos, and Nelin (1983).

Das, G. P.↗

NASA NTRS1985

Are galaxies more strongly correlated than clusters?

Distributions of galaxies and of clusters of galaxies have been investigated using the correlation function, the excess probability over random that there are two objects separated by a distance r. It is shown here that if the amplitudes of the cluster-cluster correlation function are made dimensionless, systematic changes with cluster richness vanish, implying scale invariance in the cluster process. The dimensionless galaxy-galaxy correlation seems stronger, implying gravitational enhancement on smaller scales.

Szalay, A. S.↗

NASA NTRS1985

Development of an unsteady aerodynamics model to improve correlation of computed blade stresses with test data

A reliable rotor aeroelastic analysis operational that correctly predicts the vibration levels for a helicopter is utilized to test various unsteady aerodynamics models with the objective of improving the correlation between test and theory. This analysis called Rotor Aeroelastic Vibration (RAVIB) computer program is based on a frequency domain forced response analysis which utilizes the transfer matrix techniques to model helicopter/rotor dynamic systems of varying degrees of complexity. The results for the AH-1G helicopter rotor were compared with the flight test data during high speed operation and they indicated a reasonably good correlation for the beamwise and chordwise blade bending moments, but for torsional moments the correlation was poor. As a result, a new aerodynamics model based on unstalled synthesized data derived from the large amplitude oscillating airfoil experiments was developed and tested.

Gangwani, S. T.↗

NASA NTRS1985

Thermal infrared and nonthermal radio - Remarkable correlation in disks of galaxies

A tight, linear correlation is established between the far-infrared flux measured by IRAS and the nonthermal radio flux density (at 1.4 GHz) from disks of spiral galaxies. This correlation defines a ratio of infrared to radio fluxes that is characteristic of star formation activity. Galaxies with nuclear starbursts seem to follow the correlation. If the far-infrared is reradiated luminosity from young massive stars, then the supernova remnants alone account for less than 10 percent of the radio emission. These results indicate a close coupling between dust heating and cosmic-ray generation and confinement in a wide range of conditions.

Helou, G.↗

NASA NTRS1985

High Weber number SMD correlations for pressure atomizers

Recently acquired experimental data are presented which reveal that, for Weber number (We) greater than 10.0, the atomization from simplex pressure atomizers is significantly greater than would be predicted from previously derived Sauter mean diameter (SMD) correlations. A different SMD correlation is required to accurately predict the experimental data. Below We of about 10.0, the atomization is dominated by inertial forces and bag-type breakup results. Above We of about 10.0, shear-type breakup occurs and results in a very fine spray which can accurately be predicted using a quadratic expression in Delta P. The correlation is extended to include fuel property effects, and SMD is found to vary linearly with fuel surface tension, while the influence of the fuel viscosity is not apparent.

Kennedy, J. B.↗

NASA NTRS1986

N-point correlations for biased galaxy formation

A general series expansion of arbitrary accuracy is given for the correlation function of the 'biased' regions of galaxy formation in terms of the mass autocorrelations. It is shown how to calculate the N-point correlations to arbitrary accuracy, and the validity of the various approximations is discussed. The asymptotic values of the N-point correlation functions at their highest point at zero spatial separation are given, and the scaling of these values is discussed.

Jensen, L. G.↗

NASA NTRS1986

Atmospheric correlation time measurements using coherent CO2 lidar

A pulsed TEA-CO2 lidar with coherent detection was used to measure the correlation time of backscatter from an ensemble of atmospheric aerosol particles which are illuminated by the pulsed radiation. The correlation time of the backscatter return signal is important in studies of atmospheric turbulence and its effects on optical propagation and backscatter. If the temporal coherence of the pulse is large enough, then the temporal coherence of the return signal is dominated by the turbulence and shear for a variety of interesting atmospheric conditions. Various techniques for correlation time measurement are discussed and evaluated.

Ancellet, G. M.↗

NASA NTRS1987

Optimizing a continuously variable filter in a hybrid optical correlator

In contrast to binary filters, continuously variable optical filters offer an ability to conpensate for certain imperfections in the optics of a hybrid correlator. Arbitrary static phase errors are introduced into a model of a phase-only filtering hybrid correlator, and a method of discovering a correction for them simulated. By a recursive technique a first approximation to the impulse's matched filter is adjusted (allowed to relax) so as to produce successively more localized distribution of the output in the correlation plane. The method is motivated by the development of continuously-variable phase-only spatial light modulators, but it is applicable to amplitude modulators and -with appropriate modification -- to binary modulators as well. The technique is robust against the form of the system's departure from ideal behavior.

Juday, Richard D.↗

NASA NTRS1987

Summary of the modeling and test correlations of a NASTRAN finite element vibrations model for the AH-1G helicopter, task 1

The AH-1G NASTRAN finite element model (FEM) is described and the correlations with measured data that were conducted to verify the model are summarized. Comparisons of the AH-1G NASTRAN FEM calculations with measured data include the following: (1) fuselage and tailboom static load deflection (stiffness) testing, (2) airframe ground vibration testing (0-30 H<), (3) airframe flight vibration testing (main rotor, 2,4, and 6/rev), and (4) tailboom effective skin static testing. A description of the modeling rationale and techniques used to develop the NASTRAN FEM is presented in conjunction with all previous correlation work. In general, the correlations show good agreement between analysis and test in stiffness and vibration response through 15 to 20 Hz. For higher frequencies (equal to or greater than 4/rev (21.6 Hz)), the vibration responses generally did not agree well. Also, the lateral (2/rev (10.8 Hz)) flight vibration responses were much lower in the FEM than test, indicating that there is a significant excitation source other than at the main rotor hub that is affecting the lateral vibrations, such as downwash impingement on the vertical tail.

Cronkhite, J. D.↗

NASA NTRS1986

Correlation of Ultrasonic Polar Backscatter with the Deply Technique for Assessment of Impact Damage in Composite Laminates

Ultrasonic polar backscatter, a quantitative NDE technique introduced by O'Donnell and Miller (1981), was used to characterize impact damages in a 16-ply graphite-epoxy laminate. The results were correlated with the results obtained by the destructive deply technique of Freeman (1984). The size, shape, and orientation of damage correlated well between the polar backscatter technique and the deply technique. There was good quantitative correlation between the areas of damage indicated by the two techniques, suggesting that the polar backscatter technique is sensitive to specific orientations of damage. The polar backscatter technique provides a good qualitative image of the size and shape of the largest zone of damage in each of the principal orientations; a quantitative estimate of the extent of these largest damage zones can then be obtained.

Blodgett, E. D.↗

NASA NTRS1987

An eigensystem realization algorithm using data correlations (ERA/DC) for modal parameter identification

A modification to the Eigensystem Realization Algorithm (ERA) for modal parameter identification is presented in this paper. The ERA minimum order realization approach using singular value decomposition is combined with the philosophy of the Correlation Fit method in state space form such that response data correlations rather than actual response values are used for modal parameter identification. This new method, the ERA using data correlations (ERA/DC), reduces bias errors due to noise corruption significantly without the need for model overspecification. This method is tested using simulated five-degree-of-freedom system responses corrupted by measurement noise. It is found for this case that, when model overspecification is permitted and a minimum order solution obtained via singular value truncation, the results from the two methods are of similar quality.

Juang, Jer-Nan↗