Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Bioenergy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Evaluating industrial drying of cellulosic feedstock for bioenergy: A systems approach

Here, a large portion of herbaceous and woody biomass must be dried following harvest. Natural field drying is possible if the weather cooperates. Mechanical drying is a certain way of reducing the moisture content of biomass. This paper presents an engineering analysis applied to drying of 10 Mg h –1 (exit mass flow) of biomass with an initial moisture content ranging from 25% to 70% (wet mass basis) down to 10% exit moisture content. The requirement for hog fuel to supply heat to the dryer increases from 0.5 dry Mg to 3.8 dry Mg h –1 with the increased initial moisture of biomass. The capital cost for the entire drying system including equipment for biomass size reduction, pollution control, dryer, and biomass combustor sums up to more than 4.7 million dollars. The operating cost (electricity, labor, repair, and maintenance) minus fuel cost for the dryer alone amount to 4.05 Mg –1 of dried biomass. For 50% moisture content biomass, the cost of fuel to heat the drying air is 7.41 dollars/ dry ton of biomass for a total 11.46 dollars per dry ton at 10% moisture content. The fuel cost ranges from a low of 2.21 dollars to a high of 18.54 dollars for a biomass at an initial moisture content of 25% to 75%, respectively. This wide range in fuel cost indicates the extreme sensitivity of the drying cost to initial moisture content of biomass and to ambient air humidity and temperature and highlights the significance of field drying for a cost effective drying operation.

09 BIOMASS FUELS↗

An agent-based modeling tool supporting bioenergy and bio-product community communication regarding cellulosic bioeconomy development

The emergence of the cellulosic bioeconomy requires not only adequate technological, economic, and policy advances, but also effective communication and coordination among the multiple stakeholders in the bioeconomy community. Aiming to facilitate stakeholder communication and collaboration for cellulosic bioeconomy growth, an agent-based model is developed as a community communication tool in this study. The tool simulates the behaviors and interactions of key stakeholders, as well as the responses and interactions between the stakeholders and biophysical, socioeconomic, and environmental conditions. The agent behavior rules are developed and validated based on behavior and economic theories and information attained from a stakeholder focus group study and a land use survey. A pilot study in a Central Illinois watershed shows stakeholder synergies, i.e., positive feedback loops across multiple stakeholders. The modeling tool's role in facilitating community communication is demonstrated via the focus group study. A comparison of policy scenarios suggests that the cellulosic bioeconomy development is fastest under a portfolio of policies combining the views of the multiple stakeholders. Critically, subsidy for small-scale bio-facilities is essential as it rapidly initializes an early market for cellulosic feedstocks and the adoption of Miscanthus. As a result, the communication tool is applied to bringing stakeholders and researchers together to develop shared visions, assess barriers, and explore solution portfolios to initialize and speed up the regional cellulosic bioeconomy.

09 BIOMASS FUELS↗

Results of the International Energy Agency Bioenergy Round Robin on the Analysis of Heteroatoms in Biomass Liquefaction Oils

A round robin study evaluating the analysis of biomass liquefaction oils (BLOs) from fast pyrolysis and hydrothermal liquefaction (HTL) was performed, involving fifteen laboratories in seven countries in order to assess the current status of analytical techniques for the determination of nitrogen, sulfur, and chlorine content in BLOs and evaluate potential differences in origin (i.e. fast pyrolysis vs HTL). The BLOs were produced from a range of feedstocks including pine, mixed softwoods, forest residues, micro-algae, miscanthus, and wheat straw to cover a variety in nitrogen, sulfur, and chlorine content and speciation. Nine samples were distributed, comprised of eight separate BLOs and one blind duplicate produced by five producers. The samples were analyzed for water, carbon, hydrogen, nitrogen, sulfur, and chlorine content. No analytical test method was mandated; laboratories were encouraged to utilize whichever method they determined would be most applicable, relying on the existing body of BLO literature as a guide. The results of this round robin study are presented in this paper. The results of the carbon, hydrogen, and water measurements as reference analyses had relative standard deviations (2.9%, 3.5, and 5.6%, respectively) that were comparable to those found in past round robin studies on fast pyrolysis bio-oil. The analysis of nitrogen, sulfur, and chlorine showed higher levels of variability. Laboratories mostly chose the same method for water, carbon, hydrogen and nitrogen determination whereas there were a variety of methods chosen for sulfur and chlorine determination. The results suggest that specific analytical methods for the determination of nitrogen, sulfur, and chlorine should be further refined to ensure reproducible and accurate results for BLO analysis due to their importance on emissions, material selection, and catalyst activity.

Biomass, IEA Bioenergy, pyrolysis, hydrothermal li↗

Comparative Genomics of Saccharomyces cerevisiae Natural Isolates for Bioenergy Production

Lignocellulosic plant material is a viable source of biomass to produce alternative energy including ethanol and other biofuels. However, several factors—including toxic by products from biomass pretreatment and poor fermentation of xylose and other pentose sugars—currently limit the efficiency of microbial biofuel production. To begin to understand the genetic basis of desirable traits, we characterized three strains of Saccharomyces cerevisiae with robust growth in a pretreated lignocellulosic hydrolysate or tolerance to stress conditions relevant to industrial biofuel production, through genome and transcriptome sequencing analysis. All stress resistant strains were highly mosaic, suggesting that genetic admixture may contribute to novel allele combinations underlying these phenotypes. Strain-specific gene sets not found in the lab strain were functionally linked to the tolerances of particular strains. Furthermore, genes with signatures of evolutionary selection were enriched for functional categories important for stress resistance and included stress-responsive signaling factors. Comparison of the strains’ transcriptomic responses to heat and ethanol treatment—two stresses relevant to industrial bioethanol production—pointed to physiological processes that were related to particular stress resistance profiles. Many of the genotype-by-environment expression responses occurred at targets of transcription factors with signatures of positive selection, suggesting that these strains have undergone positive selection for stress tolerance. Our results generate new insights into potential mechanisms of tolerance to stresses relevant to biofuel production, including ethanol and heat, present a backdrop for further engineering, and provide glimpses into the natural variation of stress tolerance in wild yeast strains.

59 BASIC BIOLOGICAL SCIENCES↗

A 13‐Year Record Indicates Differences in the Duration and Depth of Soil Carbon Accrual Among Potential Bioenergy Crops

Six years after replacing a maize/soybean cropping system, perennial grasses miscanthus (Miscanthus × giganteus) and switchgrass (Panicum virgatum), and a 28-species restored prairie increased particulate organic carbon in surface soils without increasing soil organic carbon (SOC). To resolve potential changes in the quantity and distribution of SOC, soils were resampled after seven to thirteen years to measure bulk density, carbon (C) content, and stable C isotopes to a depth of 1 m. SOC stocks increased between 1.75 and 2.5 Mg ha −1 year −1 in all perennial crops between 2008 and 2016 (nine growing seasons). Despite relatively low litter inputs and belowground biomass, the highest rate of SOC accrual was in restored prairie (2.5 Mg ha −1 year −1 ), followed by miscanthus (2.0 Mg ha −1 year −1 ) and switchgrass (1.75 Mg ha −1 year −1 ). The change in SOC in maize/soybean was not significant. After 2016, total SOC decreased in maize/soybean and miscanthus, resulting in slower overall rates of SOC accumulation over the full sampling period for miscanthus (0.8 Mg ha −1 year −1 ). The rate of SOC accumulation was greatest below 50 cm depth for restored prairie and switchgrass but in the top 10 cm for miscanthus. Stable isotope analysis showed 13 C enrichment in all depths of switchgrass soils, an indication of new organic C accumulation, but mixed results in all other crops. Planting perennial crops on land formerly in an annual maize/soybean cropping system can slow or reverse soil carbon losses, with the greatest increases in SOC from species-rich prairie.

agriculture↗

Determinants of enrollment in public incentive programs for forest management and their effect on future programs for woody bioenergy: evidence from Virginia and Texas

Several federal- and state-sponsored programs, including cost-sharing arrangements, tax incentives, and technical assistance programs, are available to forestland owners, aiming to encourage desired forest management practices and outcomes. However, enrollment rates in such programs are low, and trends of forestland parcelization hint at an even smaller enrollment rate in the future. Therefore, it is important to understand how socioeconomic attributes of forestland owners and past experience with such programs affect the likelihood of enrollment in public incentive programs. Among others, this will help us provide tailored information to forestland owners who are less likely to use these opportunities through extension and outreach programs. Towards this end, we conducted a survey of 1800 forestland owners in Virginia and Texas. Our recursive partitioning, logistic regression, and Cochran–Armitage trend test results suggest that forestland owners who are less likely to enroll in such programs have relatively smaller forestland acreage, a lower level of education, and shorter land ownership tenure. We also find that forestland owners with experience in public incentive programs tend to attach higher importance to potential programs, including those that do not directly benefit them. Furthermore, we also identify threshold values for explanatory variables such as acreage and tenure length.

54 ENVIRONMENTAL SCIENCES↗