Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Band structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

$O(N)$ ab initio calculation scheme for large-scale moiré structures

Here we present a two-step method specifically tailored for band structure calculation of the small-angle moiré-pattern materials which contain tens of thousands of atoms in a unit cell. In the first step, the self-consistent field calculation for the ground state is performed with the O(N) Krylov subspace method implemented in openmx. Second, the crystal momentum-dependent Bloch Hamiltonian and overlap matrix are constructed from the results obtained in the first step and only a small number of eigenvalues near the Fermi energy are solved with shift-invert and Lanczos techniques. By systematically tuning two key parameters, the cutoff radius for electron hopping interaction and the dimension of the Krylov subspace, we obtained the band structures for both rigid and corrugated twisted bilayer graphene structures down to the first magic angle (θ = 1.08°) with high enough accuracy at affordable costs. The band structures are in good agreement with those from tight-binding models, continuum models, plane-wave pseudopotential based ab initio calculations, and experimental observations. This method is also shown to be efficient in twisted double-bilayer graphene and bilayer WSe 2 . We think this two-step method can play a crucial role in other twisted two-dimensional materials, especially those with much more complex band structure and where the effective model is hard to construct.

36 MATERIALS SCIENCE↗

Global Kinetic Modeling of Banded Electron Structures in the Plasmasphere

Significant fluxes of 10 eV to 30 keV electrons have been detected in the plasmasphere, appearing as banded structures in energy with broad spatial extents and slowly evolving over several days. It is thought that these populations are decaying plasma sheet electrons injected into the corotating region of near-Earth space. This capture can occur when the convective electric field drops rapidly and the Alfven boundary suddenly outward, trapping the inner edge of the plasma sheet along closed drift paths. Our bounce-averaged kinetic model of superthermal electron transport is able to simulate this capture and the subsequent drift, diffusion, and decay of the plasma cloud. Results of this simulation will be shown and discussed, from the initial injection during the elevated convection to the final loss of the particles. It is thought that not only Coulomb collisions but also wave-particle interactions play a significant role in altering the plasma cloud. Quasilinear diffusion is currently being incorporated into the model and the importance of this mechanism will be examined. Also, the high anisotropy of the trapped population could be unstable and generate plasma waves. These and other processes will be investigated to determine the final fate of the cloud and to quantify where, how, and when the energy of the plasma cloud is deposited. Comparisons with CRRES observations of these events are shown to verify the model and explain the data.

Liemohn, M. W.↗

The band structure-matched and highly spin-polarized Co{sub 2}CrZ/Cu{sub 2}CrAl Heusler alloys interface

Here we present a lattice- and band-matched nonmagnetic L21 Heusler alloy spacer for Co{sub 2}CrZ Heusler alloys where Z=Si or Al. By first principle calculations, we find that the band structure matching is almost perfectly satisfied when they are interfaced with Cu{sub 2}CrAl. Despite the loss of half-metallicity due to interface states, our calculations show that the spin polarization at these band-matched (001) interfaces is higher than 80%. These lattice-matched Co{sub 2}CrZ/Cu{sub 2}CrAl interfaces with excellent band matching and enhanced spin scattering asymmetry are promising for all-metallic current-perpendicular-to-plane giant magnetoresistance device applications.

36 MATERIALS SCIENCE↗

Bi-directional evolutionary optimization for photonic band gap structures

Toward an efficient and easy-implement optimization for photonic band gap structures, this paper extends the bi-directional evolutionary structural optimization (BESO) method for maximizing photonic band gaps. Photonic crystals are assumed to be periodically composed of two dielectric materials with the different permittivity. Based on the finite element analysis and sensitivity analysis, BESO starts from a simple initial design without any band gap and gradually re-distributes dielectric materials within the unit cell so that the resulting photonic crystal possesses a maximum band gap between two specified adjacent bands. Numerical examples demonstrated the proposed optimization algorithm can successfully obtain the band gaps from the first to the tenth band for both transverse magnetic and electric polarizations. Some optimized photonic crystals exhibit novel patterns markedly different from traditional designs of photonic crystals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic structure of Ca, Sr, and Ba under pressure.

Electronic band structure calculations phase of Ca, Sr and Ba over wide range of atomic volumes under pressure electronic band structure calculations for fcc phase of Ca, Sr and Ba over wide range of atomic volumes under pressure electronic band structure calculations for fcc phase of Ca, Sr and Ba over wide range of atomic volumes under pressure

BARIUM↗

The critical velocity phenomenon and the origin of the regular satellites

A theory is developed for the formation of the satellite systems which are likely to have been formed in situ, that is, not by capture of the satellite by the central planet. The foundation of the theory is the observation of the similarity between the band structure of such satellites and the band structure of cosmically abundant elements. That means that the values of the quantity log Gamma, where Gamma is the ratio of the mass of the central body to the orbital radius of the secondary body, are grouped into three bands which can be identified with the three bands into which are grouped the values of the ratio of the mass of a central body to the distance at which the kinetic energy of a freely falling cloud of atoms of a given kind equals the ionization energy. A coherent series of processes that could have led to the formation of satellites is outlined. The theory is valid also for planets, since the above-mentioned band structure is noted for the sun-planets system also.

De, B. R.↗

Flat-band topology of magic angle graphene on a transition metal dichalcogenide

In this work, we consider twisted bilayer graphene on a transition metal dichalcogenide substrate, where proximity-induced spin-orbit coupling significantly alters the eight flat bands which occur near the magic angle. The resulting band structure features a pair of extremely flat bands across most of the mini-Brillouin zone. Further details depend sensitively on the symmetries of the heterostructure; we find semiconducting band structures when all twofold rotations around the in-plane axis are broken, and semimetallic band structures otherwise. We calculate the Chern numbers of the different isolated bands, and identify the parameter regimes and filling factors where valley Chern insulators and topological insulators are realized. Interestingly, we find that for realistic values of the proximity-induced terms, it is possible to realize a topological insulator protected by time-reversal symmetry by doping two holes or two electrons per superlattice unit cell into the system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and properties of A{sub 6}B{sub 2}(OH){sub 16}Cl{sub 2}.4H{sub 2}O (A = Mg, Ni, Zn, Co, Mn and B = Al, Fe) materials for environmental applications

Highlights: {yields} A{sub 6}B{sub 2}(OH){sub 16}Cl{sub 2}.4H{sub 2}O (A = Mg, Ni, Zn, Co, Mn and B = Al, Fe) materials were synthesized. {yields} Chemical synthesis produced different levels of crystallinity and ordering degree. {yields} Structural investigation by Raman scattering revealed a complex band structure. {yields} A strong correlation between band structure and ionic radius was determined. -- Abstract: Double layered hydroxide materials of composition A{sub 6}B{sub 2}(OH){sub 16}Cl{sub 2}.4H{sub 2}O (A = Mg, Ni, Zn, Co, Mn and B = Al, Fe) were synthesized by chemical precipitation at 60 {sup o}C. Different levels of crystallinity and ordering degree were observed depending upon the chemical environment or the combination between divalent and trivalent cations. The results from high-resolution transmission electron microscopy revealed that nanostructured layered samples were obtained with interplanar spacing compatible with previous literature. Raman scattering was employed to investigate the complex band structure observed, particularly the lattice vibrations at lower frequencies, which is intimately correlated to the cationic radius of both divalent and trivalent ions. The results showed that strongly coordinated water and chloride ions besides highly structured hydroxide layers have a direct influence on the stability of the hydrotalcites. It was observed that transition and decomposition temperatures varied largely for different chemical compositions.

36 MATERIALS SCIENCE↗

The Effects of Ru and Rh Substitutions on the Magneto-electronic and Optical Properties of the TbNi{sub 5} Intermetallic Compound: An Ab Initio Investigation

In this study, we have performed the first-principles investigation of the structural, electronic, magnetic, and optical properties of TbNi{sub 5}, TbNi{sub 3}Ru{sub 2}, and TbNi{sub 3}Rh{sub 2} compounds. The full-potential linearized augmented plane waves with local orbitals method is used in the framework of density functional theory (DFT) employing the generalized gradient approximation (GGA) for the exchange correlation functional as implemented in WIEN2k package. The structural properties are reposed on the evaluation of the equilibrium lattice parameters of these compounds under hexagonal structure such as lattice constants (a and c), bulk modulus (B), and its first pressure derivative (B{sup ′}). The spin-polarized electronic structures, including band structure and density of states, are calculated employing the GGA plus band correlated Hubbard parameter (GGA + U) scheme. The results show that density of states and magnetic moment of the pure TbNi{sub 5} compound are changed by doping. These changes are observed in the appearance of additional peaks on the spectral density of states (DOS) and in the augmentation of the total magnetic moment of TbNi{sub 3}X{sub 2} (X = Ru and Rh) intermetallic compounds. Based on the electronic structure results, the frequency dependents of optical conductivity are estimated in all the spectra and interpreted in the interband optical absorption part.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of effective mass and spontaneous polarization on photocatalytic activity of wurtzite and zinc-blende ZnS

Semiconductor zinc sulphide (ZnS) has two common phases: hexagonal wurtzite and cubic zinc-blende structures. The crystal structures, energy band structures, density of states (DOS), bond populations, and optical properties of wurtzite and zinc-blende ZnS were investigated by the density functional theory of first-principles. The similar band gaps and DOS of wurtzite and zinc-blende ZnS were found and implied the similarities in crystal structures. However, the distortion of ZnS{sub 4} tetrahedron in wurtzite ZnS resulted in the production of spontaneous polarization and internal electric field, which was beneficial for the transfer and separation of photogenerated electrons and holes.

36 MATERIALS SCIENCE↗

Direct Measurement of the Tunable Electronic Structure of Bilayer MoS 2 by Interlayer Twist

Using angle-resolved photoemission on micrometer-scale sample areas, we directly measure the interlayer twist angle-dependent electronic band structure of bilayer molybdenum-disulfide (MoS 2 ). Our measurements, performed on arbitrarily stacked bilayer MoS 2 flakes prepared by chemical vapor deposition, provide direct evidence for a downshift of the quasiparticle energy of the valence band at the Brillouin zone center ($\bar{Γ}$ point) with the interlayer twist angle, up to a maximum of 120 meV at a twist angle of ~40°. Our direct measurements of the valence band structure enable the extraction of the hole effective mass as a function of the interlayer twist angle. While our results at $\bar{Γ}$agree with recently published photoluminescence data, our measurements of the quasiparticle spectrum over the full 2D Brillouin zone reveal a richer and more complicated change in the electronic structure than previously theoretically predicted. The electronic structure measurements reported here, including the evolution of the effective mass with twist-angle, provide new insight into the physics of twisted transition-metal dichalcogenide bilayers and serve as a guide for the practical design of MoS 2 optoelectronic and spin-/valley-tronic devices.

36 MATERIALS SCIENCE↗

DFT calculations of electronic and optical properties of SrS with LDA, GGA and mGGA functionals

The theoretical investigations of electronic and optical properties of SrS are made using the first principle DFT calculations. The calculations are performed for the local-density approximation (LDA), generalized gradient approximation (GGA) and for an alternative form of GGA i.e. metaGGA for both rock salt type (B1, Fm3m) and cesium chloride (B2, Pm3m) structures. The band structure, density of states and optical spectra are calculated under various available functional. The calculations with LDA and GGA functional underestimate the values of band gaps with all functional, however the values with mGGA show reasonably good agreement with experimental and those calculated by using other methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Manipulation of Dirac cones in intercalated epitaxial graphene

Graphene is an intriguing material in view of its unique Dirac quasi-particles, and the manipulation of its electronic structure is important in material design and applications. Here, we theoretically investigate the electronic band structure of epitaxial graphene on SiC with intercalation of rare earth metal ions (e.g., Yb and Dy) using first-principles calculations. We can use the intercalation to control the coupling of the constituent components (buffer layer, graphene, and substrate), resulting in strong modification of the graphene band structure. We also demonstrate that the metal-intercalated epitaxial graphene has tunable band structures by controlling the energies of Dirac cones as well as the linear and quadratic band dispersion depending on the intercalation layer and density. Thus, the metal intercalation is a viable method to manipulate the electronic band structure of the epitaxial graphene, which can enhance the functional utility and controllability of the material.

36 MATERIALS SCIENCE↗

Band gap renormalization, carrier mobilities, and the electron-phonon self-energy in crystalline naphthalene

Organic molecular crystals are expected to feature appreciable electron-phonon interactions that influence their electronic properties at zero and finite temperature. Here, we report first-principles calculations and an analysis of the electron-phonon self-energy in naphthalene crystals. We compute the zero-point renormalization and temperature dependence of the fundamental band gap, and the resulting scattering lifetimes of electronic states near the valence- and conduction-band edges employing density functional theory. Further, our calculated phonon renormalization of the GW-corrected quasiparticle band structure predicts a fundamental band gap of 5 eV for naphthalene at room temperature, in good agreement with experiments. From our calculated phonon-induced electron lifetimes, we obtain the temperature-dependent mobilities of electrons and holes in good agreement with experimental measurements at room temperature. Finally, we show that an approximate energy self-consistent computational scheme for the electron-phonon self-energy leads to the prediction of strong satellite bands in the electronic band structure. We find that a single calculation of the self-energy can reproduce the self-consistent results of the band gap renormalization and electrical mobilities for naphthalene, provided that the on-the-mass-shell approximation is used, i.e., if the self-energy is evaluated at the bare eigenvalues.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Near-infrared downconversion luminescence of SrMoO{sub 4}:Tm{sup 3+},Yb{sup 3+} phosphors

Graphical abstract: The calculated band structure of SrMoO{sub 4} and the visible and infrared emission spectra of SrMoO{sub 4}:1%Tm{sup 3+},10%Yb{sup 3+} phosphors under 283 nm excitation.▪ - Highlights: • Near-infrared downconversion luminescence of SrMoO{sub 4}:Tm{sup 3+},Yb{sup 3+} phosphors were systematically investigated. • The electronic structure of SrMoO{sub 4} was estimated by density functional theory. • The quenching concentration of Yb{sup 3+} ions approaches 10 mol%. • The energy transfer mechanism was discussed in detail. - Abstract: Tm{sup 3+} and Yb{sup 3+} codoped SrMoO{sub 4} phosphors were synthesized by the high-temperature solid-state reaction method. The structure, ultraviolet-visible diffuse reflectance spectra, photoluminescence, decay properties and theoretical energy transfer efficiency of the phosphors were investigated in detail. The electronic structure and band gap of SrMoO{sub 4} were estimated by density functional theory (DFT) calculation. The XRD results show that all the prepared phosphors can be readily indexed to scheelite-type structure. The strong visible emission around 473 nm from Tm{sup 3+} ({sup 1}G{sub 4} → {sup 3}H{sub 6}) and near-infrared (NIR) emission around 998 nm from Yb{sup 3+} ({sup 2}F{sub 5/2} → {sup 2}F{sub 7/2}) of the SrMoO{sub 4}:Tm{sup 3+},Yb{sup 3+} phosphors were observed under 283 nm excitation. The dependence of the visible and NIR emissions on Yb{sup 3+} concentration have also been investigated. The quenching concentration of Yb{sup 3+} ions approaches 10 mol%. In addition, the energy transfer processes and possible transfer routes were proposed.

36 MATERIALS SCIENCE↗

Evaluation of transition metal oxide as carrier-selective contacts for silicon heterojunction solar cells

"Reducing light absorption in the non-active solar cell layers, while enabling the extraction of the photogenerated minority carriers at quasi-Fermi levels are two key factors to improve current generation and voltage, and therefore efficiency of silicon heterojunction solar devices. To address these two critical aspects, transition metal oxide materials have been proposed as alternative to the n- and p-type amorphous silicon used as electron and hole selective contacts, respectively. Indeed, transition metal oxides such as molybdenum oxide, titanium oxide, nickel oxide or tungsten oxide combine a wide band gap typically over 3 eV with a band structure and theoretical band alignment with silicon that results in high transparency to the solar spectrum and in selectivity for the transport of only one carrier type. Improving carrier extraction or injection using transition metal oxide has been a topic of investigation in the field of organic solar cells and organic LEDs; from these pioneering works a lot of knowledge has been gained on materials properties, ways to control these during synthesis and deposition, and their impact on device performance. Recently, the transfer of some of this knowledge to silicon solar cells and the successful application of some metal oxide to contact heterojunction devices have gained much attention. In this contribution, we investigate the suitability of various transition metal oxide films (molybdenum oxide, titanium oxide, and tungsten oxide) deposited either by thermal evaporation or sputtering as transparent hole or electron selective transport layer for silicon solar cells. In addition to systematically characterize their optical and structural properties, we use photoemission spectroscopy to relate compound stoichiometry to band structure and characterize band alignment to silicon. The direct silicon/metal oxide interface is further analyzed by quasi-steady state photoconductance decay method to assess the quality of surface passivation. In complement, we construct full device structures incorporating in some cases surface passivation schemes, with measured initial conversion efficiency over 15% and evaluate the carrier transport properties using temperature-dependent current-voltage and capacitance-voltage measurements. With this detailed characterization study, we aim at providing the framework to assess the potential of a material as a carrier selective contact and the understanding of how each of the aforementioned parameters on the metal oxide films influence the full solar cell operating performances.

14 SOLAR ENERGY↗

Triple photonic band-gap structure dynamically induced in the presence of spontaneously generated coherence

We study a cold atomic sample coherently driven into the five-level triple-{Lambda} configuration for attaining a dynamically controlled triple photonic band-gap structure. Our numerical calculations show that three photonic band gaps with homogeneous reflectivities up to 92% can be induced on demand around the probe resonance by a standing-wave driving field in the presence of spontaneously generated coherence. All these photonic band gaps are severely malformed with probe reflectivities declining rapidly to very low values when spontaneously generated coherence is gradually weakened. The triple photonic band-gap structure can also be attained in a five-level chain-{Lambda} system of cold atoms in the absence of spontaneously generated coherence, which however requires two additional traveling-wave fields to couple relevant levels.

74 ATOMIC AND MOLECULAR PHYSICS↗

Valence-band electronic structure evolution of graphene oxide upon thermal annealing for optoelectronics

We report valence band electronic structure evolution of graphene oxide (GO) upon its thermal reduction. Degree of oxygen functionalization was controlled by annealing temperatures, and an electronic structure evolution was monitored using real-time ultraviolet photoelectron spectroscopy. We observed a drastic increase in density of states around the Fermi level upon thermal annealing at ~600 °C. The result indicates that while there is an apparent band gap for GO prior to a thermal reduction, the gap closes after an annealing around that temperature. This trend of band gap closure was correlated with electrical, chemical, and structural properties to determine a set of GO material properties that is optimal for optoelectronics. The results revealed that annealing at a temperature of ~500 °C leads to the desired properties, demonstrated by a uniform and an order of magnitude enhanced photocurrent map of an individual GO sheet compared to as-synthesized counterpart.

36 MATERIALS SCIENCE↗