SEARCH · Engineering Papers

Results for “BEAMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

All sources NASA NTRS DOE OSTI

NASA NTRS2019

Meshless Local Petrov-Galerkin (MLPG) Method with Orthogonal Polynomials for Euler-Bernoulli Beam Problems

In this paper, the feasibility of orthogonal polynomials in the meshless local Petrov Galerkin method (MLPG) method is studied. The orthogonal polynomials, Chebyshev and Legendre polynomials, are used in this MLPG method as trial functions. The test functions used were power functions with smooth derivatives at their ends. The performance of these methods is studied by applying these methods to Euler-Bernoulli beam problems. The MLPG-Galerkin and Legendre methods passed all the patch tests for simple beam problems. Next the formulations are tested on complex beam problems such as beams with partial loadings and continuous beam problems. Problems with load discontinuities and additional supports require special attention. Near discontinuities, judicious choice of number of nodes and nodal placements are needed to obtain accurate deflections, slopes, moments and shear forces. As polynomial functions are used, the large number of nodes can create a transformation matrix that is ill-conditioned, resulting in problems with the inversion of the matrix. The conditioning worsens as the number of nodes are increased beyond 20. Quadruple precision was needed for models to obtain accurate solutions. Even with quadruple precision the accuracy of the method suffers as the number of nodes is increased beyond 20. This appears to be a drawback of the MLPG-Chebyshev and MLPG-Legendre methods.

Raju, Ivatury S.↗

NASA NTRS2020

Model Validation for Bigelow Expandable Activity Module (BEAM) with Stowage

The Bigelow Expandable Activity Module (BEAM) was a collaboration between NASA and Bigelow Aerospace to develop an expandable habitat technology that could be used for future space exploration missions such as the Artemis program. On April 26, 2016, the BEAM was launched and berthed to the International Space Station (ISS) on the aft port of Node 3. After the originally planned two-year mission life, BEAM was approved for use as a stowage module for a 109-cargotransfer bag equivalent (CTBE) to alleviate stowage limitations onboard the ISS. The present work builds on the previous 2017 model validation to flight data that demonstrated that BEAM could generally accommodate cargo stowage without adversely affecting BEAM thermal control, primarily for condensation management. Once the stowage was configured in early 2019, model validation efforts resumed. The thermal model revisions included the CTBE stowage and updated CFD-derived heat transfer coefficients for various intra-module ventilation (IMV) flow rates. The coefficients were provided by the Crew and Thermal Systems Division (EC) at NASA JSC and Jacobs Technology. The model is now revalidated and able to predict minimum temperatures with good agreement to flight temperatures (within 1 °C) for both historic and recurring minimum values. Additionally, the model is partially validated for reduced flow rates. With this model, the team was able to provide new flight rule recommendations for condensation and IMV operations management.

Sydney Taylor↗

NASA NTRSDate not supplied

Lunar Polar Exploration with Beamed Powered Rovers

Use of a laser to transmit power to a photovoltaic array has been proposed many times, including significant work done at NASA Glenn during the 1990s, but until recently the technology has lagged behind the ambitious requirements. The current NASA objective of lunar polar exploration provides the need, and evolution of higher-power and more efficient lasers provides the opportunity. Exploration of the ice-bearing craters near the lunar poles, where complete absence of sunlight precludes solar power, have been identified as a significant technology challenge for NASA’s future exploration. An approach to solve this is to use a laser to send power from the illuminated crater rim to a photovoltaic receiver on a rover inside the permanently dark region. A conceptual design was done of a prototype laser power system to be included on a proposed flight demonstration of the Kilopower space reactor. For the design, the laser transmitter is mounted on a small rover capable of moving to a location in line of sight of the receiving rover, e.g., on a crater rim with a view into the permanently dark region to be explored. A 250-watt laser diode bar transmits power at 808 nm, using a 10.5 cm optical beam director. The beam is received by a GaAs solar array mounted on the exploring rover, where it is converted into electrical power at ~50% optical to electrical efficiency. For the flight demonstration, 50 meters of laser transmission was required. The design showed a total laser mass of 7.8 kg is capable of producing the beam needed, not including the thermal control system. The demonstration design demonstrates 50-m transmission, but it would be valuable to have longer point-to-point beaming on the moon. Long beam paths require higher coherence than the diode laser bars of the demonstration system. The development of high-efficiency diode-pumped fiber lasers meets this technology need: and diode-pumped fiber lasers using the Er/Yb system can be purchased commercially with overall conversion efficiency of greater than 50% at wavelength 1.06 micrometers. Two technologies for a photovoltaic converter for this wavelength are the InGaAs photovoltaic cell, using technology developed for multi-junction space solar cells, or newly-developed high-quantum efficiency silicon cells. The next step to mature the technology would be a lunar flight demonstration. In the future, this has the potential to enhance and enable future human exploration of the moon, harvesting and utilizing the ice resources of these permanently-shadowed craters.

Geoffrey A Landis↗

NASA NTRS2023

Statistical Study of the Non-Thermal Continuum Radiation Beaming Angle Measured By the High Frequency Receiver on Van Allen Probes-A

The nonthermal continuum (NTC) radiation beaming angle is computed over the entire Van Allen Probes-A mission when the spacecraft was in the dawn sector. The conditions in the dawn sector are favorable for the wave vector to lie near/in the spacecraft's spin plane allowing a favorable estimate of the beaming angle, and the dawn sector is also advantageous in that previous studies show NTC occurrence to peak in this sector. We found that scatter plots, over the entire mission, of beaming angle versus magnetic latitude form a distinct inverted-V pattern, with the apex at/near the magnetic equator. This pattern was sharpest for frequencies (f) ≲ 100 kHz. Using the NTC beaming formula from the linear mode conversion theory (LMCT), we show that such an inverted-V pattern is expected due to the large variation in the plasmapause location over the entire mission. The theoretical derived pattern qualitatively reproduces the observed pattern but not quantitatively. The lack of quantitative agreement is discussed and is attributed to several factors, one factor is off-centered emissions from the radio window. The qualitative agreement strongly supports LMCT as being the dominant mechanism generating NTC for f ≲ 100 kHz. For f ≳ 100 kHz, the inverted-V pattern becomes less distinct, and strong near-equatorial beaming is observed. After considering contamination of our selections by left-handed polarized AKR, our study suggests that besides LMCT another unidentified NTC generation mechanism becomes important for f ≳ 100 kHz.

Linear Mode Conversion Theory↗

NASA NTRS1996

Virtual Anodes in Ion Beam Emissions in Space: Numerical Simulations

From introduction: Many space experiments and applications involve plasma beam emissions. For instance, electron and ion beam experiments have been conducted to study beam-plasma interactions, neutralization processes, spacecraft charging and discharge, etc. This paper is concerned with the physics of ion beam emissions from spacecraft to aq low density space plasma. The emphasis is on space charge effects.

plasma↗

NASA NTRS1956

Experimental Investigation of the Strength of Multiweb Beams with Corrugated Webs

The results of an experimental investigation of the strength of multiweb beams with corrugated webs are reported. Included in the investigation were two types of connection between the web and the skin. A comparison between the structural efficiency of corrugated-web and channel-web multiweb beams is presented, and it is shown that, for a considerable range of the structural index, corrugated-web beams can be built which are structurally more efficient than channel-web beams.

LOADS AND STRESSES, STRUCTURAL - BENDING↗

NASA NTRS2006

An analysis of the phase dispersion in the symmetric beam combiner

An astronomical beam combiner combines the two beams of starlight to form white-light fringes. It is desirable that the dispersion of the beam combiner be minimized across the observation wavelength range. We present here an analysis of the phase dispersion from coatings for a symmetric beam combiner. The sensitivity of the dispersion to a slight mismatch in beamsplitter coatings is also studied.

coatings↗

NASA NTRS2005

Electron-beam lithography for micro and nano-optical applications

Direct-write electron-beam lithography has proven to be a powerful technique for fabricating a variety of micro- and nano-optical devices. Binary E-beam lithography is the workhorse technique for fabricating optical devices that require complicated precision nano-scale features. We describe a bi-layer resist system and virtual-mark height measurement for improving the reliability of fabricating binary patterns. Analog E-beam lithography is a newer technique that has found significant application in the fabrication of diffractive optical elements. We describe our techniques for fabricating analog surface-relief profiles in E-beam resist, including some discussion regarding overcoming the problems of resist heating and charging. We also describe a multiple-field-size exposure scheme for suppression of field-stitch induced ghost diffraction orders produced by blazed diffraction gratings on non-flat substrates.

electron-beam lithography↗

NASA NTRS2012

Momentum Flux Determination Using the Multi-beam Poker Flat Incoherent Scatter Radar

In this paper, we develop an estimator for the vertical flux of horizontal momentum with arbitrary beam pointing, applicable to the case of arbitrary but fixed beam pointing with systems such as the Poker Flat Incoherent Scatter Radar (PFISR). This method uses information from all available beams to resolve the variances of the wind field in addition to the vertical flux of both meridional and zonal momentum, targeted for high-frequency wave motions. The estimator utilises the full covariance of the distributed measurements, which provides a significant reduction in errors over the direct extension of previously developed techniques and allows for the calculation of an error covariance matrix of the estimated quantities. We find that for the PFISR experiment, we can construct an unbiased and robust estimator of the momentum flux if sufficient and proper beam orientations are chosen, which can in the future be optimized for the expected frequency distribution of momentum-containing scales. However, there is a potential trade-off between biases and standard errors introduced with the new approach, which must be taken into account when assessing the momentum fluxes. We apply the estimator to PFISR measurements on 23 April 2008 and 21 December 2007, from 60-85 km altitude, and show expected results as compared to mean winds and in relation to the measured vertical velocity variances.

Momentum flux↗

NASA NTRS2017

Earth to Orbit Beamed Energy Experiment

As a means of primary propulsion, beamed energy propulsion offers the benefit of offloading much of the propulsion system mass from the vehicle, increasing its potential performance and freeing it from the constraints of the rocket equation. For interstellar missions, beamed energy propulsion is arguably the most viable in the near- to mid-term. A near-term demonstration showing the feasibility of beamed energy propulsion is necessary and, fortunately, feasible using existing technologies. Key enabling technologies are large area, low mass spacecraft and efficient and safe high power laser systems capable of long distance propagation. NASA is currently developing the spacecraft technology through the Near Earth Asteroid Scout solar sail mission and has signed agreements with the Planetary Society to study the feasibility of precursor laser propulsion experiments using their LightSail-2 solar sail spacecraft. The capabilities of Space Situational Awareness assets and the advanced analytical tools available for fine resolution orbit determination now make it possible to investigate the practicalities of an Earth-to-orbit Beamed Energy eXperiment (EBEX) - a demonstration at delivered power levels that only illuminate a spacecraft without causing damage to it. The degree to which this can be expected to produce a measurable change in the orbit of a low ballistic coefficient spacecraft is investigated. Key system characteristics and estimated performance are derived for a near term mission opportunity involving the LightSail-2 spacecraft and laser power levels modest in comparison to those proposed previously. While the technology demonstrated by such an experiment is not sufficient to enable an interstellar precursor mission, if approved, then it would be the next step toward that goal.

CubeSat↗

NASA NTRS2018

Comparing Free-Free and Shaker Table Model Correlation Methods Using Jim Beam

Finite element model correlation as part of a spacecraft program has always been a challenge. For any NASA mission, the coupled system response of the spacecraft and launch vehicle can be determined analytically through a Coupled Loads Analysis (CLA), as it is not possible to test the spacecraft and launch vehicle coupled system before launch. The value of the CLA is highly dependent on the accuracy of the frequencies and mode shapes extracted from the spacecraft model. NASA standards require the spacecraft model used in the final Verification Loads Cycle to be correlated by either a modal test or by comparison of the model with Frequency Response Functions (FRFs) obtained during the environmental qualification test. Due to budgetary and time constraints, most programs opt to correlate the spacecraft dynamic model during the environmental qualification test, conducted on a large shaker table. For any model correlation effort, the key has always been finding a proper definition of the boundary conditions. This paper is a correlation case study to investigate the difference in responses of a simple structure using a free-free boundary, a fixed boundary on the shaker table, and a base-drive vibration test, all using identical instrumentation. The NAVCON Jim Beam test structure, featured in the IMAC round robin modal test of 2009, was selected as a simple, well recognized and well characterized structure to conduct this investigation. First, a free-free impact modal test of the Jim Beam was done as an experimental control. Second, the Jim Beam was mounted to a large 20,000 lbf shaker, and an impact modal test in this fixed configuration was conducted. Lastly, a vibration test of the Jim Beam was conducted on the shaker table. The free-free impact test, the fixed impact test, and the base-drive test were used to assess the effect of the shaker modes, evaluate the validity of fixed-base modeling assumptions, and compare final model correlation results between these boundary conditions.

Modal Test↗

NASA NTRS2018

Bigelow Expandable Activity Module (BEAM) ISS Year - Two

Bigelow Expandable Activity Module's (BEAM) life has been extended and in addition to being a test bed of the first human-rated expandable space module, BEAM will be utilized as an ISS (International Space Station) stowage module. Hear about BEAM's on-orbit performance as well as highlights of BEAM's use on ISS as a technology demonstration.

BEAM↗

NASA NTRS2020

Electromagnetic scattering by discrete random media illuminated by a Gaussian beam I: Derivation of the radiative transfer equation

In this paper we present the vector radiative transfer theory for a discrete random medium illuminated by a Gaussian beam. The analysis is based on a plane wave spectrum representation for a Gaussian beam and uses an approach developed previously for a discrete random medium illuminated by a plane electromagnetic wave. Specifically, we establish an integral representation for the coherent field, define an approximate coherent field that satisfies the differential equation fulfilled by the coherent field corresponding to a plane electromagnetic wave and matches the Gaussian beam at the interface of the particulate medium, and finally, derive the vector radiative transfer equation. For weakly focused Gaussian beams, the resulting equation is the traditional radiative transfer equation

Gaussian beam↗

NASA NTRSDate not supplied

Establishing an in-Space Joining Ecosystem at NASA Marshall via Laser Beam Welding

NASA Marshall is establishing an ISAM technology development ecosystem leveraging investments in laser beam processing to enable in-space joining via laser beam welding. A number of ground and flight experiments are being performed to develop laser beam welding as a mature process for use in space. These experiments access varied combinations of reduced gravity, reduced atmospheric pressure, and extreme temperatures to simulate relevant space environments. The associated instrumentation needed to exquisitely understand fundamental mechanisms during laser beam welding and to provide adequate validation datasets for computational models is also being developed and/or integrated.

thermal vacuum↗

NASA NTRSDate not supplied

Establishing an In-Space Joining Ecosystem at NASA Marshall via Laser Beam Welding

thermal vacuum↗

NASA NTRS1940

Stress distribution in and equivalent width of flanges of wide, thin-wall steel beams

The use of different forms of wide-flange, thin-wall steel beams is becoming increasingly widespread. Part of the information necessary for a national design of such members is the knowledge of the stress distribution in and the equivalent width of the flanges of such beams. This problem is analyzed in this paper on the basis of the theory of plane stress. As a result, tables and curves are given from which the equivalent width of any given beam can be read directly for use in practical design. An investigation is given of the limitations of this analysis due to the fact that extremely wide and thin flanges tend to curve out of their plane toward the neutral axis. A summary of test data confirms very satisfactorily the analytical results.

BEAMS, BOX-STRESSES↗

NASA NTRS1968

Electron beam deflected to determine focal point location

System locates the focal point of an extremely high intensity electron beam. The electron beam is swept and scanned cyclically with deflection coils under a focusing lens, causing the beam focal point to move so the locus of its positions is a spherical surface symmetrical to the beam axis.

Downing, R. D.↗

NASA NTRS1968

Electron beam standby absorber system

Electron beam energy is absorbed by deflectors which allow beam distribution over an absorber located between the deflectors and workpiece. The undeflected beam passes through a hole in the absorber when the deflection is de-energized, when energized, the beam is kept to a minimum power level by deflection rate change.

Downing, R. D.↗