Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Average model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Development of rotorcraft interior noise control concepts. Phase 2: Full scale testing, revision 1

The phase 2 effort consisted of a series of ground and flight test measurements to obtain data for validation of the Statistical Energy Analysis (SEA) model. Included in the gound tests were various transfer function measurements between vibratory and acoustic subsystems, vibration and acoustic decay rate measurements, and coherent source measurements. The bulk of these, the vibration transfer functions, were used for SEA model validation, while the others provided information for characterization of damping and reverberation time of the subsystems. The flight test program included measurements of cabin and cockpit sound pressure level, frame and panel vibration level, and vibration levels at the main transmission attachment locations. Comparisons between measured and predicted subsystem excitation levels from both ground and flight testing were evaluated. The ground test data show good correlation with predictions of vibration levels throughout the cabin overhead for all excitations. The flight test results also indicate excellent correlation of inflight sound pressure measurements to sound pressure levels predicted by the SEA model, where the average aircraft speech interference level is predicted within 0.2 dB.

Yoerkie, C. A.↗
NASA NTRS1988

Eight years of ultraviolet spectra of the variable BL Lacertae object PKS 2155-304

IUE data obtained on the variable BL Lacertae object PKS 2155-304 over an eight-year period are presented and analyzed in a fashion that minimizes the SNR of individual spectra. In general, the ultraviolet continuum can be fitted by a power law model with an average spectral index of roughly 0.89 + or - 0.12(sigma). The observations show that PKS 2155-304 has been variable on a time scale as short as 10 days and by an overall factor of two. The spectral index has changed very little and is uncorrelated with intensity in an absolute sense.

Urry, C. M.↗
NASA NTRS1988

Mg I as a probe of the solar chromosphere - The atomic model

This paper presents a complete atomic model for Mg I line synthesis, where all the atomic parameters are based on recent experimental and theoretical data. It is shown how the computed profiles at 4571 A and 5173 A are influenced by the choice of these parameters and the number of levels included in the model atom. In addition, observed profiles of the 5173 A b2 line and theoretical profiles for comparison (based on a recent atmospheric model for the average quiet sun) are presented.

Mauas, Pablo J.↗
NASA NTRS1989

GEOID '88: A gravimetric geoid for Canada

Using Stokes' formula, a gravimetric geoid was calculated for Canada. The input data are as follows: 15 x 15' block averages were used for Canada and the USA and 1 x 1 deg block averages and satellite model (GEM-T1) provided values for the remaining part of the Earth. The geoid was calculated at 6398 points covering the area within the points rho(sub i)(phi sub i; lambda sub i) (lambda is + west): rho sub 1(40,125); rho sub 2(75,184); rho sub 3(75,10); and rho sub 4(40,60). The computed geoid refers to the GRS1980 and reaches a local minimum of -47.3 meters around the western part of Hudson Bay. A contour map of the geoid is shown.

Nagy, Dezso↗
NASA NTRS1989

Effect on atmospheric CO2 from seasonal variations in the high latitude ocean

Data from the North Pacific gyre, Bering Sea, and North Atlantic show large seasonal fluctuations in the pCO2 of surface waters. The seasonal variation in these latitudes apparently has a generic pattern: higher surface water pCO2 in winter and lower in summer. Satellite data will eventually help decipher the relative effects of temperature and biological production in the seasonal carbon cycle, but as yet little work has been done on what possible role the seasonality of pCO2 in the high latitudes might have on the average value of atmospheric pCO2. A model is developed that shows the average value for atmospheric pCO2 depends upon the ratio of the rates at which the ocean/atmosphere system moves toward equilibrium values during the summer and winter conditions of the high latitude ocean.

Volk, Tyler↗
NASA NTRS1990

Neutral winds derived from IRI parameters and from the HWM87 wind model for the SUNDIAL campaign of September, 1986

Meridional neutral winds derived from the height of the maximum ionization of the F2-layer are compared with values from results of the HWM87 empirical neutral wind model. The time period considered in this study is the SUNDIAL-2 campaign, September 21 through October 5, 1986. Winds have been derived from measurements by a global network of ionosondes, as well as from similar quantities generated by the International Reference Ionosphere. Global wind patterns from the three sources are similar. Differences tend to be the result of local or transient phenomena that are either too rapid to be described by the order of harmonics of the empirical models, or are the result of temporal changes not reproduced by models based on average conditions.

Miller, K. L.↗
NASA NTRS1990

Neutral winds derived from IRI parameters and from the HWM87 wind model for the sundial campaign of September, 1986

Meridional neutral winds derived from the height of the maximum ionization of the F2 layer are compared with values from results of the HWM87 empirical neutral wind model. The time period considered is the SUNDIAL-2 campaign, 21 Sept. through 5 Oct. 1986. Winds were derived from measurements by a global network of ionosondes, as well as from similar quantities generated by the International Reference Ionosphere. Global wind patterns from the three sources are similar. Differences tend to be the result of local or transient phenomena that are either too rapid to be described by the order of harmonics of the empirical models, or are the result of temporal changes not reproduced by models based on average conditions.

Miller, K. L.↗
NASA NTRS1991

Microwave simulations of a tropical rainfall system with a three-dimensional cloud model

A three-dinensional cloud model-microwave radiative transfer model combination is used to study the relations among the precipitation and other microphysical characteristics of a tropical oceanic squall line and the upwelling radiance at pertinent microwave frequencies. Complex brightness temperature-rain rate relations are evident at the full horizontal resolution (1.5 km) of the models, with spatial averaging producing smoother, shifter relations in most cases. Nonprecipitating cloud water is shown to be important in understanding the resulting distribution of brightness temperature. At the mature stage, convective portions of the cloud system are shown to produce different brightness temperature relations than the stratiform portion, primarily related to the distribution of cloud water. The evolution of the convective system from a small convective complex through its mature stage and the beginning of its dissipation also is shown to result in a variation of brightness temperature-rain relations, related to the distribution of cloud water and the evolution of ice in the precipitating system. The results of the study point to the need to take into account the evolution of nonprecipitating cloud water and precipitation-sized ice in the retrieval of rain from passive microwave space observations. This effect is evident for both the life cycle of individual convective elements and the life cycle of the convective system as a whole.

Adler, Robert A.↗
NASA NTRS1991

Energy balance in the solar transition region. II - Effects of pressure and energy input on hydrostatic models

The radiation of energy by hydrogen lines and continua in hydrostatic energy-balance models of the transition region between the solar chromosphere and corona is studied using models which assume that mechanical or magnetic energy is dissipated in the hot corona and is then transported toward the chromosphere down the steep temperature gradient of the transition region. These models explain the average quiet sun and also the entire range of variability of the Ly-alpha lines. The relations between the downward energy flux, the pressure of the transition region, and the different hydrogen emission are described.

Fontenla, J. M.↗
NASA NTRS1991

Derivation of mid-infrared (5-25 microns) optical constraints of some silicates and palagonite

This study was initially conceived in order to aid in the interpretation of Martian surface and atmospheric aerosol mineralogy. As a result, the minerals included are biased toward samples which represent hydrated and hydroxylated silicates. Due to their physical particle size, clays and other materials, such as palagonite, cannot be prepared using typical preparation techniques. Yet in some cases, such as for Mars, these are the materials of perhaps the greatest interest. In order to obtain a suitable sample of these less cohesive materials for the laboratory measurements, a KBr pellet die was used and a pellet of the pure sample was prepared. For all clays and the palagonite, a pellet with highly reflective surfaces at visible wavelengths was produced. The reflectivities of all samples were determined, and to derive the optical constants of a materials as a function of wavelength, dispersion analysis was used which describes the real and imaginary indices of refraction as the contributions due to a sum of classical oscillators and relates them via Frensel's equations for non-normal incidence, the the measured near-normal reflectivity. The final values that were determined represent averages of several model fits to each data set using the same number of oscillators by varying the high frequency dielectric constant.

Roush, T. L.↗
NASA NTRS1992

Continuation of tailored composite structures of ordered staple thermoplastic material

The search for the cost effective composite structure has motivated the investigation of several approaches to develop composite structure from innovative material forms. Among the promising approaches is the conversion of a planar sheet to components of complex curvature through sheet forming or stretch forming. In both cases, the potential for material stretch in the fiber direction appears to offer a clear advantage in formability over continuous fiber systems. A framework was established which allows the simulation of the anisotropic mechanisms of deformation of long discontinuous fiber laminates wherein the matrix phase is a viscous fluid. Predictions for the effective viscosities of a hyper-anisotropic medium consisting of collimated, discontinuous fibers suspended in viscous matrix were extended to capture the characteristics of typical polymers including non-Newtonian behavior and temperature dependence. In addition, the influence of fiber misorientation was also modeled by compliance averaging to determine ensemble properties for a given orientation distribution. A design tool is presented for predicting the effect of material heterogeneity on the performance of curved composite beams such as those used in aircraft fuselage structures. Material heterogeneity can be induced during manufacturing processes such as sheet forming and stretch forming of thermoplastic composites. This heterogeneity can be introduced in the form of fiber realignment and spreading during the manufacturing process causing radial and tangential gradients in material properties. Two analysis procedures are used to solve the beam problems. The first method uses separate two-dimensional elasticity solutions for the stresses in the flange and web sections of the beam. The separate solutions are coupled by requiring that forces and displacements match section boundaries. The second method uses an approximate Rayleigh-Ritz technique to find the solutions for more complex beams. Analyses are performed for curved beams of various cross-sections loaded in pure bending and with a uniform distributed load. Preliminary results show that the geometry of the beam dictates the effect of heterogeneity on performance. The role of heterogeneity is larger in beams with a small average radius-to-depth ration, R/t, where R is the average radius of the beam and t is the difference between the inside and outside radii. Results of the anlysis are in the form of stresses and displacements and are compared to both mechanics of materials and numerical solutions obtained using finite element analysis.

Santare, Michael H.↗
NASA NTRS1991

Infrared dust and millimeter-wave carbon monoxide emission in the Orion region

The far-infrared dust emission seen by the IRAS satellite in the Orion region is analyzed as a function of the local radiation field intensity, and the dust temperature and opacity are compared with (C-12)O and (C-13)O emission. The infrared radiation is interpreted within the framework of a single-component large grain model and a multicomponent grain model consisting of subpopulations of grains with size-dependent temperatures. A strong dependence of the 100-micron optical depth derived is found using the large grain model on the average line-of-sight dust temperature and radiation field. In the hot environment surrounding high-luminosity sources and H II regions, all dust along the line-of-sight radiates at 100 microns, and the dust-to-gas ratio, based on the 100-micron opacity and I(/C-13/O), appears to be in agreement with the standard value, about 1 percent by mass. A relationship is found between the inferred dust-to-gas ratio and the radiation field intensity responsible for heating the dust which can be used to estimate the gas column density from the dust opacity derived from the 60- and 100-micron IRAS fluxes.

Bally, John↗
NASA NTRS1993

Research into the influence of spatial variability and scale on the parameterization of hydrological processes

The objectives of the research were as follows: (1) Extend the Representative Elementary Area (RE) concept, first proposed and developed in Wood et al, (1988), to the water balance fluxes of the interstorm period (redistribution, evapotranspiration and baseflow) necessary for the analysis of long-term water balance processes. (2) Derive spatially averaged water balance model equations for spatially variable soil, topography and vegetation, over A RANGE OF CLIMATES. This is a necessary step in our goal to derive consistent hydrologic results up to GCM grid scales necessary for global climate modeling. (3) Apply the above macroscale water balance equations with remotely sensed data and begin to explore the feasibility of parameterizing the water balance constitutive equations at GCM grid scale.

Wood, Eric F.↗
NASA NTRS1994

Retrieval of sizes and total masses of particles in volcanic clouds using AVHRR bands 4 and 5

The advanced very high resolution radiometer (AVHRR) sensor on polar orbiting NOAA satellites can discriminate between volcanic clouds and meteorological clouds using two-band data in the thermal infrared. This paper is aimed at developing a retrieval of the particle sizes, optical depth, and total masses of particles from AVHRR two-band data of volcanic clouds. Radiative transfer calculations are used with a semi-transparent cloud model that is based on assumptions of spherical particle shape, a homogeneous underlying surface, and a simple thin cloud parallel to the surface. The model is applied to observed AVHRR data from a 13-hour old drifting cloud from the August 19, 1992, eruption of Crater Peak/Spurr Volcano, Alaska. The AVHRR data fit in the range of results calculated by the model, which supports its credibility. According to the model results, the average of effective particle radius in the test frame of this cloud is in the range of 2 to 2.5 micrometer, the optical depth at 12 micrometer is about 0.60 - 0.65. The total estimated mass of ash in the air amounts to 0.24 - 0.31 x 10(exp 6) tons, which is about 0.7-0.9% of the mass measured in the ashfall blanket. Sensitivity tests show that the mass estimate is more sensitive to the assumed ash size distribution than it is to the ash composition.

Wen, Shiming↗
NASA NTRS1994

Empirical convection models for northward IMF

It is clear that polar cap convection during times of northward Interplanetary Magnetic Field (IMF) is more structured and of lower mean speed than at times of southward IMF. This, coupled with the fact that the polar cap is smaller, means that empirical models are more difficult to construct with certainty. It is also clear that sunward flow deep in the polar cap is often observed, but its connection with the rest of the flow pattern is controversial. At present, empirical models are of three types: 'statistical' models wherein data from different days but with similar IMF conditions are averaged together; 'pattern recognition' models, which are built up by examining individually hundreds of passes to derive a 'typical' pattern which embodies features frequently observed; and 'assimilative' models, which use data of different types and from as many locations as possible, but all taken at the same time, in order to derive a snapshot (or series of snapshots) of the entire pattern. Each type of model has its own difficulties. Statistical models, by their very nature, smooth out flow features (e.g. the convection reversal, and the locus of sunward flow deep in the polar cap) which are not found at precisely the same invariant latitudes and magnetic local times on different days. Pattern recognition models are better at reproducing small-scale features, but the large-scale pattern can be a matter of interpretation. Assimilative models (such as AMIE) hold out the best hope for creating instantaneous, global convection patterns; however, the analysis technique tends to be most irregular (and least reliable) in the regions which are not well covered by in situ data. It appears that, at least at times, a four cell model with sunward flow at the highest and lowest latitudes, and antisunward flow in between, is consistent with the observations. At other times, the observations may be consistent with a two-cell convection pattern, but which includes significant meanders within the polar cap.

Moses, Julie J.↗
NASA NTRS1994

The roles of vertical mixing, solar radiation, and wind stress in a model simulation of the sea surface temperature seasonal cycle in the tropical Pacfic Ocean

The climatological seasonal cycle of sea surface temperature (SST) in the tropical Pacific is simulated using a newly developed upper ocean model. The roles of vertical mixing, solar radiation, and wind stress are investigated in a hierarchy of numerical experiments with various combinations of vertical mixing algorithms and surface-forcing products. It is found that the large SST annual cycle in the eastern equatorial Pacific is, to a large extent, controlled by the annually varying mixed layer depth which, in turn, is mainly determined by the competing effects of solar radiation and wind forcing. With the application of our hybrid vertical mixing scheme the model-simulated SST annual cycle is much improved in both amplitude and phase as compared to the case of a constant mixed layer depth. Beside the strong effects on vertical mixing, solar radiation is the primary heating term in the surface layer heat budget, and wind forcing influences SST by driving oceanic advective processes that redistribute heat in the upper ocean. For example, the SST seasonal cycle in the western Pacific basically follows the semiannual variation of solar heating, and the cycle in the central equatorial region is significantly affected by the zonal advective heat flux associated with the seasonally reversing South Equatorial Current. It has been shown in our experiments that the amount of heat flux modification needed to eliminate the annual mean SST errors in the model is, on average, no larger than the annual mean uncertainties among the various surface flux products used in this study. Whereas a bias correction is needed to account for remaining uncertainties in the annual mean heat flux, this study demonstrates that with proper treatment of mixed layer physics and realistic forcing functions the seasonal variability of SST is capable of being simulated successfully in response to external forcing without relying on a relaxation or damping formulation for the dominant surface heat flux contributions.

Chen, Dake↗
NASA NTRS1994

New geomorphic data on the active Taiwan orogen: A multisource approach

A multisource and multiscale approach of Taiwan morphotectonics combines different complementary geomorphic analyses based on a new elevation model (DEM), side-looking airborne radar (SLAR), and satellite (SPOT) imagery, aerial photographs, and control from independent field data. This analysis enables us not only to present an integrated geomorphic description of the Taiwan orogen but also to highlight some new geodynamic aspects. Well-known, major geological structures such as the Longitudinal Valley, Lishan, Pingtung, and the Foothills fault zones are of course clearly recognized, but numerous, previously unrecognized structures appear distributed within different regions of Taiwan. For instance, transfer fault zones within the Western Foothills and the Central Range are identified based on analyses of lineaments and general morphology. In many cases, the existence of geomorphic features identified in general images is supported by the results of geological field analyses carried out independently. In turn, the field analyses of structures and mechanisms at some sites provide a key for interpreting similar geomorphic featues in other areas. Examples are the conjugate pattern of strike-slip faults within the Central Range and the oblique fold-and-thrust pattern of the Coastal Range. Furthermore, neotectonic and morphological analyses (drainage and erosional surfaces) has been combined in order to obtain a more comprehensive description and interpretation of neotectonic features in Taiwan, such as for the Longitudinal Valley Fault. Next, at a more general scale, numerical processing of digital elevation models, resulting in average topography, summit level or base level maps, allows identification of major features related to the dynamics of uplift and erosion and estimates of erosion balance. Finally, a preliminary morphotectonic sketch map of Taiwan, combining information from all the sources listed above, is presented.

Deffontaines, B.↗
NASA NTRS1993

Microwave Scattering Model for Grass Blade Structures

In this paper, the electromagnetic scattering solution for a grass blade with complex cross-section geometry is considered. It is assumed that the blade cross section is electrically small, but its length is large compared to the incident wavelength. In a recent study it has been shown that the scattering solution for such problems, in the form of a polarizability tensor, can be obtained using the low-frequency approximation in conjunction with the method of moments. In addition, the study shows that the relationship between the polarizability tensor of a dielectric cylinder and its dielectric constant can be approximated by a simple algebraic expression. The results of this study are used to show that this algebraic approximation is valid also for cylinders with cross sections the shape of grass blades, providing that proper values am selected for each of three constants appearing in the expression. These constants are dependent on cylinder shape, and if the relationship between the constants and the three parameters describing a grass blade shape can be determined, an algebraic approximation relating polarizability tensor to blade shape, as well as dielectric constant, can be formed. Since the elements of the polarizability tensor are dependent on only these parameters, this algebraic approximation can replace the cumbersome method of moments model. A conjugate gradient method is then implemented to correctly determine the three constants of the algebraic approximation for each blade shape. A third-order polynomial fit to the data is then determined for each constant, thus providing a complete analytic replacement to the numerical (moment method) scattering model. Comparisons of this approximation to the numerical model show an average error of less than 3%.

Stiles, James M.↗