Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Automated Tool”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

SU-E-J-168: Automated Pancreas Segmentation Based On Dynamic MRI

Purpose: MRI guided radiotherapy is particularly attractive for abdominal targets with low CT contrast. To fully utilize this modality for pancreas tracking, automated segmentation tools are needed. A hybrid gradient, region growth and shape constraint (hGReS) method to segment 2D upper abdominal dynamic MRI is developed for this purpose. Methods: 2D coronal dynamic MR images of 2 healthy volunteers were acquired with a frame rate of 5 f/second. The regions of interest (ROIs) included the liver, pancreas and stomach. The first frame was used as the source where the centers of the ROIs were annotated. These center locations were propagated to the next dynamic MRI frame. 4-neighborhood region transfer growth was performed from these initial seeds for rough segmentation. To improve the results, gradient, edge and shape constraints were applied to the ROIs before final refinement using morphological operations. Results from hGReS and 3 other automated segmentation methods using edge detection, region growth and level set were compared to manual contouring. Results: For the first patient, hGReS resulted in the organ segmentation accuracy as measure by the Dices index (0.77) for the pancreas. The accuracy was slightly superior to the level set method (0.72), and both are significantly more accurate than the edge detection (0.53) and region growth methods (0.42). For the second healthy volunteer, hGReS reliably segmented the pancreatic region, achieving a Dices index of 0.82, 0.92 and 0.93 for the pancreas, stomach and liver, respectively, comparing to manual segmentation. Motion trajectories derived from the hGReS, level set and manual segmentation methods showed high correlation to respiratory motion calculated using a lung blood vessel as the reference while the other two methods showed substantial motion tracking errors. hGReS was 10 times faster than level set. Conclusion: We have shown the feasibility of automated segmentation of the pancreas anatomy based on dynamic MRI.

60 APPLIED LIFE SCIENCES↗

Unsupervised Image-Based Classification of Corrosion Severity in Automobile Engine Connecting Rods

Corrosion in engine connecting rods is a critical issue in the automotive industry, potentially leading to catastrophic engine failure, monetary losses, and safety hazards. The labor shortage in the industry further emphasizes the need for fast, accurate, and automated corrosion detection methods to ensure appropriate surface treatments can be applied to restore component integrity. We present an unsupervised image-based framework for classifying corrosion severity in automobile engine connecting rods using short-wave infrared (SWIR) and telecentric grayscale imaging. We employ the structural similarity index measure (SSIM) as a dissimilarity metric and the k-medians clustering algorithm for classification. Our algorithm achieves an overall accuracy of 80.64% for SWIR images, with 100% accuracy in classifying highly corroded samples. For grayscale images, the method attains an overall accuracy of 77.42%, with 90.91% accuracy for highly corroded samples. The method’s ability to work with different imaging modalities and its high accuracy in identifying severe corrosion cases make it a promising tool for automated corrosion assessment in the automotive industry, potentially improving efficiency and safety in engine component maintenance.

42 ENGINEERING↗

FRET Tutorial

In this tutorial, we present the FRET tool for writing, understanding, formalizing and analyzing requirements. In practice, requirements are typically written in natural language, which is ambiguous and consequently not amenable to formal analysis. Since formal, mathematical notations are unintuitive, requirements in FRET are entered in a restricted, natural language, called FRETish with precise unambiguous meaning. This tutorial explains how requirements can be captured in FRETish and subsequently formalized in temporal logics and in the synchronous data flow language Lustre. We show, through multiple examples, how FRET assists users in understanding FRETish requirements and clarifying subtle semantic issues through English and diagrammatic explanations as well as interactive simulation. FInally, this tutorial describes how FRET can be used to perform realizability checking for identifying conflicting requirements and the connection of FRET with (1) the CoCoSim automated analysis tool for the verification of Simulink and Stateflow models, and (2) the Copilot runtime monitoring tool for the analysis of C programs.

FRET↗

Remote-Sensing Time Series Analysis, a Vegetation Monitoring Tool

The Time Series Product Tool (TSPT) is software, developed in MATLAB , which creates and displays high signal-to- noise Vegetation Indices imagery and other higher-level products derived from remotely sensed data. This tool enables automated, rapid, large-scale regional surveillance of crops, forests, and other vegetation. TSPT temporally processes high-revisit-rate satellite imagery produced by the Moderate Resolution Imaging Spectroradiometer (MODIS) and by other remote-sensing systems. Although MODIS imagery is acquired daily, cloudiness and other sources of noise can greatly reduce the effective temporal resolution. To improve cloud statistics, the TSPT combines MODIS data from multiple satellites (Aqua and Terra). The TSPT produces MODIS products as single time-frame and multitemporal change images, as time-series plots at a selected location, or as temporally processed image videos. Using the TSPT program, MODIS metadata is used to remove and/or correct bad and suspect data. Bad pixel removal, multiple satellite data fusion, and temporal processing techniques create high-quality plots and animated image video sequences that depict changes in vegetation greenness. This tool provides several temporal processing options not found in other comparable imaging software tools. Because the framework to generate and use other algorithms is established, small modifications to this tool will enable the use of a large range of remotely sensed data types. An effective remote-sensing crop monitoring system must be able to detect subtle changes in plant health in the earliest stages, before the effects of a disease outbreak or other adverse environmental conditions can become widespread and devastating. The integration of the time series analysis tool with ground-based information, soil types, crop types, meteorological data, and crop growth models in a Geographic Information System, could provide the foundation for a large-area crop-surveillance system that could identify a variety of plant phenomena and improve monitoring capabilities.

McKellip, Rodney↗

Optimal Synthesis of Compliant Mechanisms using Subdivision and Commercial FEA (DETC2004-57497)

The field of distributed-compliance mechanisms has seen significant work in developing suitable topology optimization tools for their design. These optimal design tools have grown out of the techniques of structural optimization. This paper will build on the previous work in topology optimization and compliant mechanism design by proposing an alternative design space parameterization through control points and adding another step to the process, that of subdivision. The control points allow a specific design to be represented as a solid model during the optimization process. The process of subdivision creates an additional number of control points that help smooth the surface (for example a C(sup 2) continuous surface depending on the method of subdivision chosen) creating a manufacturable design free of some traditional numerical instabilities. Note that these additional control points do not add to the number of design parameters. This alternative parameterization and description as a solid model effectively and completely separates the design variables from the analysis variables during the optimization procedure. The motivation behind this work is to create an automated design tool from task definition to functional prototype created on a CNC or rapid-prototype machine. This paper will describe the proposed compliant mechanism design process and will demonstrate the procedure on several examples common in the literature.

Hull, Patrick V.↗

A Fully Automated Method for CT-on-Rails-Guided Online Adaptive Planning for Prostate Cancer Intensity Modulated Radiation Therapy

Purpose: This study was designed to validate a fully automated adaptive planning (AAP) method which integrates automated recontouring and automated replanning to account for interfractional anatomical changes in prostate cancer patients receiving adaptive intensity modulated radiation therapy (IMRT) based on daily repeated computed tomography (CT)-on-rails images. Methods and Materials: Nine prostate cancer patients treated at our institution were randomly selected. For the AAP method, contours on each repeat CT image were automatically generated by mapping the contours from the simulation CT image using deformable image registration. An in-house automated planning tool incorporated into the Pinnacle treatment planning system was used to generate the original and the adapted IMRT plans. The cumulative dose–volume histograms (DVHs) of the target and critical structures were calculated based on the manual contours for all plans and compared with those of plans generated by the conventional method, that is, shifting the isocenters by aligning the images based on the center of the volume (COV) of prostate (prostate COV-aligned). Results: The target coverage from our AAP method for every patient was acceptable, while 1 of the 9 patients showed target underdosing from prostate COV-aligned plans. The normalized volume receiving at least 70 Gy (V{sub 70}), and the mean dose of the rectum and bladder were reduced by 8.9%, 6.4 Gy and 4.3%, 5.3 Gy, respectively, for the AAP method compared with the values obtained from prostate COV-aligned plans. Conclusions: The AAP method, which is fully automated, is effective for online replanning to compensate for target dose deficits and critical organ overdosing caused by interfractional anatomical changes in prostate cancer.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Planning Coverage Campaigns for Mission Design and Analysis: Clasp for the Proposed DESDynI Mission

Mission design and analysis present challenges in that almost all variables are in constant flux, yet the goal is to achieve an acceptable level of performance against a concept of operations, which might also be in flux. To increase responsiveness, our approach is to use automated planning tools that allow for the continual modification of spacecraft, ground system, staffing, and concept of operations while returning metrics that are important to mission evaluation, such as area covered, peak memory usage, and peak data throughput. We have applied this approach to DESDynI (Deformation, Ecosystem Structure, and Dynamics of Ice) mission design concept using the CLASP (Compressed Large-scale Activity Scheduler/Planner) planning system [7], but since this adaptation many techniques have changed under the hood for CLASP and the DESDynI mission concept has undergone drastic changes, including that it has been renamed the Earth Radar Mission. Over the past two years, we have run more than fifty simulations with the CLASP-DESDynI adaptation, simulating different mission scenarios with changing parameters including targets, swaths, instrument modes, and data and downlink rates. We describe the evolution of simulations through the DESDynI MCR (Mission Concept Review) and afterwards.

DESDynI (Deformation, Ecosystem Structure, and Dyn↗

NanoSIP: NanoSIMS Applications for Microbial Biology

High-resolution imaging with secondary ion mass spectrometry (nanoSIMS) has become a standard method in systems biology and environmental biogeochemistry and is broadly used to decipher ecophysiological traits of environmental microorganisms, metabolic processes in plant and animal tissues, and cross-kingdom symbioses. When combined with stable isotope-labeling—an approach we refer to as nanoSIP—nanoSIMS imaging offers a distinctive means to quantify net assimilation rates and stoichiometry of individual cell-sized particles in both low- and high-complexity environments. While the majority of nanoSIP studies in environmental and microbial biology have focused on nitrogen and carbon metabolism (using 15 N and 13 C tracers), multiple advances have pushed the capabilities of this approach in the past decade. The development of a high-brightness oxygen ion source has enabled high-resolution metal analyses that are easier to perform, allowing quantification of metal distribution in cells and environmental particles. New preparation methods, tools for automated data extraction from large data sets, and analytical approaches that push the limits of sensitivity and spatial resolution have allowed for more robust characterization of populations ranging from marine archaea to fungi and viruses. Further, NanoSIMS studies continue to be enhanced by correlation with orthogonal imaging and ‘omics approaches; when linked to molecular visualization methods, such as in situ hybridization and antibody labeling, these techniques enable in situ function to be linked to microbial identity and gene expression. Here we present an updated description of the primary materials, methods, and calculations used for nanoSIP, with an emphasis on recent advances in nanoSIMS applications, key methodological steps, and potential pitfalls.

07 ISOTOPE AND RADIATION SOURCES↗

Interactive Exploration of High-Dimensional Phase Diagrams

High-dimensional thermodynamic phase stability databases are becoming increasingly common due to the convergence of three recent trends: (i) the widespread interest in so-called “high-entropy” alloys, (ii) the availability of high-throughput computational assessments of phase stability in broad composition spaces and (iii) the ongoing development of ever-increasingly broad, multicomponent, multiphase CALPHAD databases. Although automated computational tools can readily process such high-dimensional data, scientists are often unable to visualize the relevant phase relations, an ability that is crucial to gaining an intuitive understanding of the stability constraints governing materials design. The present work addresses this need by providing algorithms that enable the interactive exploration of phase equilibria in high-dimensional spaces. These algorithms concentrate the complex nonlinear nonsmooth optimization needed into a preprocessing step that generates a large number of high-dimensional yet elementary graphical primitives. Furthermore, these primitives can then be cross-sectioned to yield 3-dimensional views in a computationally efficient manner that enables an interactive exploration of high-dimensional spaces. All of these operations are highly parallelizable, thus facilitating scaling of this method to large data sets.

36 MATERIALS SCIENCE↗

A framework for challenges and solutions in biodesign research

The bioeconomy represents an advanced economic paradigm that builds upon previous agricultural, industrial, and digital economic models. It seeks to tackle critical global challenges such as resource scarcity, escalating healthcare demands, and environmental degradation. At the heart of the bioeconomy is biomanufacturing, which uses natural or engineered enzymes or cell factories built from ​biological components like promoters, terminators, regulatory sequences, reporters, and functional genes into various chassis hosts (including animal, microbial, plant, and de novo systems) to create products such as food, energy, medicine, materials, chemicals, and engineered tissue/organs. An enabler of biomanufacturing is biodesign – also known as biosystems design and closely related to synthetic biology or engineering biology. This interdisciplinary field aims to understand and predictably modify existing life forms or create entirely new biological entities/systems using rational engineering strategies and automated design tools. Through these capabilities, biodesign supports the discovery, optimization, and creation of efficient platforms for biomanufacturing.

59 BASIC BIOLOGICAL SCIENCES↗

Machine learning for domain transfer between simulated and experimental 2D X-ray diffraction patterns using generative adversarial networks

X-ray diffraction (XRD) is a well-established technique for analyzing materials at an atomic level. Dynamic compression experiments (DCE), in which materials are subject to extreme pressures, can provide fundamental understanding to pressure-induced phase transitions and compression of the crystal lattice. The analysis of XRD patterns from highly compressed samples is non-trivial given the sparsity of data, high experimental costs, and the fact that the data is often marred with X-ray background and other artifacts. While accurate computational frameworks exist, they solve the forward problem—from structures and orientations to XRD patterns. Solving the inverse problem for 2D experimental diffraction patterns is currently a complex manual process of matching and comparing experimentally observed patterns to computationally generated ones. Machine learning is a promising tool for automating the matching process but often requires data-intensive architectures. Here, in this study, we use a CycleGAN to translate the domain of limited experimental data to a domain in which there is readily available simulated data. This domain shift allows data-intensive machine learning models that have only been trained on simulated XRD patterns to be used in the analysis of experiments.

Brozak, Samantha Jean [Sandia National Laboratorie↗

Isotopically nonstationary metabolic flux analysis (INST-MFA): putting theory into practice

Typically, 13 C flux analysis relies on assumptions of both metabolic and isotopic steady state. If metabolism is steady but isotope labeling is not allowed to fully equilibrate, isotopically nonstationary metabolic flux analysis (INST-MFA) can be used to estimate fluxes. This requires solution of differential equations that describe the time-dependent labeling of network metabolites, while iteratively adjusting the flux and pool size parameters to match the transient labeling measurements. INST-MFA holds a number of unique advantages over approaches that rely solely upon steady-state isotope enrichments. First, INST-MFA can be applied to estimate fluxes in autotrophic systems, which consume only single-carbon substrates. Second, INST-MFA is ideally suited to systems that label slowly due to the presence of large intermediate pools or pathway bottlenecks. Finally, INST-MFA provides increased measurement sensitivity to estimate reversible exchange fluxes and metabolite pool sizes, which represents a potential framework for integrating metabolomic analysis with 13 C flux analysis. This review highlights the unique capabilities of INST-MFA, describes newly available software tools that automate INST-MFA calculations, presents several practical examples of recent INST-MFA applications, and discusses the technical challenges that lie ahead.

59 BASIC BIOLOGICAL SCIENCES↗

Demonstration of reduced-order urban scale building energy models

The aim of this study is to demonstrate a developed framework to rapidly create urban scale reduced-order building energy models using a systematic summary of the simplifications required for the representation of building exterior and thermal zones. These urban scale reduced-order models rely on the contribution of influential variables to the internal, external, and system thermal loads. OpenStudio Application Programming Interface (API) serves as a tool to automate the process of model creation and demonstrate the developed framework. The results of this study show that the accuracy of the developed reduced-order building energy models varies only up to 10% with the selection of different thermal zones. In addition, to assess complexity of the developed reduced-order building energy models, this study develops a novel framework to quantify complexity of the building energy models. Consequently, this study empowers the building energy modelers to quantify their building energy model systematically in order to report the model complexity alongside the building energy model accuracy. An exhaustive analysis on four university campuses suggests that the urban neighborhood buildings lend themselves to simplified typical shapes. Specifically, building energy modelers can utilize the developed typical shapes to represent more than 80% of the U.S. buildings documented in the CBECS database. One main benefits of this developed framework is the opportunity for different models including airflow and solar radiation models to share the same exterior representation, allowing a unifying exchange data. Altogether, the results of this study have implications for a large-scale modeling of buildings in support of urban energy consumption analyses or assessment of a large number of alternative solutions in support of retrofit decision-making in the building industry.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Can Positron Emission Tomography (PET) or PET/Computed Tomography (CT) Acquired in a Nontreatment Position Be Accurately Registered to a Head-and-Neck Radiotherapy Planning CT?

Purpose: To quantify the uncertainties associated with incorporating diagnostic positron emission tomography/CT (PET/CT) and PET into the radiotherapy treatment-planning process using different image registration tools, including automated and manual rigid body registration methods, as well as deformable image registration. Methods and Materials: The PET/CTs and treatment-planning CTs from 12 patients were used to evaluate image registration accuracy. The PET/CTs also were used without the contemporaneously acquired CTs to evaluate the registration accuracy of stand-alone PET. Registration accuracy for relevant normal structures was quantified using an overlap index and differences in the center of mass (COM) positions. For tumor volumes, the registration accuracy was measured using COM positions only. Results: Registration accuracy was better with PET/CT than with PET alone. The COM displacements ranged from 3.2 {+-} 0.6 mm (mean {+-} 95% confidence interval, for brain) to 8.4 {+-} 2.6 mm (spinal cord) for registration with PET/CT data, compared with 4.8 {+-} 1.7 mm (brain) and 9.9 {+-} 3.1 mm (spinal cord) with PET alone. Deformable registration improved accuracy, with minimum and maximum errors of 1.1 {+-} 0.8 mm (brain) and 5.4 {+-} 1.4 mm (mandible), respectively. Conclusions: It is possible to incorporate PET and/or PET/CT acquired in diagnostic positions into the treatment-planning process through the use of advanced image registration algorithms, but precautions must be taken, particularly when delineating tumor volumes in the neck. Acquisition of PET/CT in the treatment-planning position would be the ideal method to minimize registration errors.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Clinical Natural Language Processing for Radiation Oncology: A Review and Practical Primer

Natural language processing (NLP), which aims to convert human language into expressions that can be analyzed by computers, is one of the most rapidly developing and widely used technologies in the field of artificial intelligence. Natural language processing algorithms convert unstructured free text data into structured data that can be extracted and analyzed at scale. In medicine, this unlocking of the rich, expressive data within clinical free text in electronic medical records will help untap the full potential of big data for research and clinical purposes. Recent major NLP algorithmic advances have significantly improved the performance of these algorithms, leading to a surge in academic and industry interest in developing tools to automate information extraction and phenotyping from clinical texts. Thus, these technologies are poised to transform medical research and alter clinical practices in the future. Radiation oncology stands to benefit from NLP algorithms if they are appropriately developed and deployed, as they may enable advances such as automated inclusion of radiation therapy details into cancer registries, discovery of novel insights about cancer care, and improved patient data curation and presentation at the point of care. However, challenges remain before the full value of NLP is realized, such as the plethora of jargon specific to radiation oncology, nonstandard nomenclature, a lack of publicly available labeled data for model development, and interoperability limitations between radiation oncology data silos. Successful development and implementation of high quality and high value NLP models for radiation oncology will require close collaboration between computer scientists and the radiation oncology community. Here, we present a primer on artificial intelligence algorithms in general and NLP algorithms in particular; provide guidance on how to assess the performance of such algorithms; review prior research on NLP algorithms for oncology; and describe future avenues for NLP in radiation oncology research and clinics.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Standardization of Head and Neck Contouring Using the Acanthiomeatal Line

The purpose of this study was to determine the perceived and actual chin position(s) used for radiotherapy of head-and-neck cancers in a variety of clinical settings. Dosimetrists were asked to describe the external landmarks used to set the chin position. The lateral treatment planning radiographic figures in Ang's textbook, Radiotherapy for Head and Neck Cancers: Indications and Techniques, were analyzed for chin position by drawing a horizontal line from the tip of the chin to the cervical spine. The physicians at 7 departments were asked to rate the chin positions used in their departments for head-and-neck simulations. Choices included: (1) mildly flexed, (2) neutral, (3) mildly extended, and (4) hyperextended. In addition, each center was asked to select 2 representative cases to show routine chin position. The dosimetrists fixed the chin in neutral position by placing a virtual plane defined by 3 points (the base of the nasal septum [acanthus] and the external auditory canals) perpendicular to the table top. The type of head holder was irrelevant. Eighty-two percent (31/38) of the figures in Ang's text showed positioning in the neutral position (tip of the chin intersected the cervical spine between C2-3/C3-4). Most (71.4%) of the radiotherapists thought their patients were treated in the hyperextended neck position but, in fact, 85.7% (12/14) of the simulations showed a neural neck position. Reproducible chin positioning can be obtained by using the acanthiomeatal line. Consistent use of this technique will create a uniformly positioned set of axial co-images that have consistent appearance of avoidance and lymphatic areas. This will simplify contouring on axial computed tomography (CT) images of the neck. Standardizing the chin position is an important step to developing a standardized atlas and developing an information tool for automated contouring.

61 RADIATION PROTECTION AND DOSIMETRY↗

Mass Spectrometry Adduct Calculator

We describe the Mass Spectrometry Adduct Calculator (MSAC), an automated Python tool to calculate the adduct ion masses of a parent molecule. Here, adduct refers to a version of a parent molecule [M] that is charged due to addition or loss of atoms and electrons resulting in a charged ion, e.g. [M+H] + . MSAC includes a database of 2,341 potential ions and their mass-to-charge ratios (m/z) as extracted from the NIST/EPA/NIH Mass Spectral Library (NIST17), the Global Natural Products Social Molecular Networking Public Spectral Libraries (GNPS), and MassBank of North America (MoNA). The calculator relies on user-selected subsets of the combined database to calculate expected m/z for adducts of molecules supplied as formulas This tool is intended to help researchers create identification libraries to collect evidence for the presence of molecules in mass spectrometry data. While the included adduct database focuses on adducts typically detected during liquid chromatography-mass spectrometry analyses, users may supply their own lists of adducts and charge states for calculating expected m/z. We also analyzed statistics on adducts from spectra contained in the three selected mass spectral libraries. MSAC is freely available at https://github.com/pnnl/MSAC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diabatization with Electrostatic Embedding for Studying Photophysics in Organic Molecular Crystals

Highly emissive organic molecular crystals find applications in several areas, such as organic electronics, solar cells, and sensors. Understanding the excited-state mechanisms underlying these applications is essential for optimizing and controlling them effectively. Exciton models coupled with nonadiabatic dynamics, particularly quantum dynamics, provide crucial insights into photochemical and photophysical processes in molecular crystals. Nevertheless, there remains a lack of general tools and automated workflows to facilitate such simulations. In this paper, we present a computational strategy to investigate the photoactivated dynamics of organic molecular crystals, bridging methodologies traditionally used for molecular systems and materials science, with a particular focus on the interplay between local excitations and charge transfer (CT) processes. We have implemented an interface between the fromage and Overdia programs, enabling the construction of vibronic Hamiltonians for molecular crystals within an excited-state ONIOM(QM:QM′) framework, incorporating long-range electrostatics through a RESP-based Ewald summation. Fragment-based diabatization provides a route to quantum dynamics simulations in weak-to-intermediate coupling regimes. The method was applied to the photophysics of dibenzo[g,p]chrysene (DBC) crystals using time-dependent DFT. The fromage/ Overdia interface was employed to compute the couplings of local excitations and CT states for 18 unique DBC dimers in the crystal and to quantify the influence of electrostatic embedding, which was found to be modest (10−20%). Simulations on π-stacked dimers reproduced the small red shift observed experimentally from solution to crystal, attributed to electronic interactions among fixed monomers rather than crystal electrostatics. Quantum dynamics simulations revealed ultrafast population transfer from bright local excitations to CT states. This approach establishes a robust framework linking molecular and solid-state excited-state dynamics, with potential applications for studying excitations, defects, and impurities in molecular crystals.

Crystals↗