Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AGGLOMERATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Influence of Iron Ore Addition on Metallurgical Reaction Behavior of Iron Coke Hot Briquette

Utilization of iron coke hot briquette (ICHB) has been considered to be one effective countermeasure to achieve low-carbon blast furnace. Before its actual application, a series of extensive fundamental investigations on the ICHB are required. In this study, the influence of iron ore addition on the metallurgical reaction behavior of ICHB made from carbonizing coal–iron ore composite agglomeration were investigated based on Chinese raw material conditions, and the corresponding mechanisms were revealed. The results show that the addition of iron ore concentrate leads to the degradation of the compressive strength and drum strength of ICHB, but they are maintained at a relatively high level. Furthermore, by increasing the addition ratio of iron ore from 0 to 20 pct, the density of ICHB is enhanced from 1413 to 1637 kg/m{sup 3}, and the porosity is increased from 8.03 to 12.84 pct, and the optical texture index (OTI) is reduced from 58.1 to 25.3. The phase composition of ICHB mainly consists of C, Fe, SiO{sub 2}, Fe{sub 3}O{sub 4}, and FeO after the addition of the iron ore concentrate. Moreover, the reactivity of ICHB is accelerated from 46.74 to 69.54 pct due to the catalytic effects of metallic iron and iron oxide, which worked as oxygen transfer carriers, while the post-reaction strength is reduced from 74.08 to 36.81 pct. In addition, the starting temperature of the ICHB gasification reaction is decreased remarkably from 919 °C to 839 °C. The activation energy (E{sub a}) for the gasification reaction under nonisothermal conditions is reduced from 312.78 to 249.83 kJ/mol, and the preexponential factor (A) shows a decreasing trend as well. Simultaneously, E{sub a} and A display the kinetic compensation effect and present a good linear relationship.

36 MATERIALS SCIENCE↗

Assessment of a Simplified Correlation Between Wettability Measurement and Dispersion/Coagulation Potency of Oxide Particles in Ferrous Alloy Melt

This article seeks to demonstrate a direct and simplified correlation between the measurement of the wettability and the agglomeration potency of the inclusion particles in liquid ferrous alloy. The established methodology has been validated by the agreement between the calculated coagulation coefficient of Al{sub 2}O{sub 3} particles and the experimental data in the open literature. Subsequently, the coagulation coefficient of Al{sub 2}O{sub 3}, MgO, and Ti{sub 2}O{sub 3} particles in ferrous alloy melts was evaluated quantitatively by the proposed method using the actual experimental data of contact angle and surface tension. Meanwhile, the effect of the matrix composition has been investigated by comparing the Hamaker constant and coagulation coefficient between Ti{sub 2}O{sub 3}/pure iron and Ti{sub 2}O{sub 3}/low-carbon steel systems. It is noted that the change of coagulation coefficient associated with the contact angle is caused by the formation of a new phase at the oxide/metal interface at the high temperature. The present work aims to provide a deep understanding of the connection between inclusion motion behavior in the liquid alloy and the high temperature interfacial phenomenon.

36 MATERIALS SCIENCE↗

Sticking-Free Reduction of Titanomagnetite Ironsand in a Fluidized Bed Reactor

Fluidized bed reduction of iron ore fines is typically inhibited by the onset of “sticking” at temperatures above 973 K, which leads to particle agglomeration and defluidization of the bed. Here, we report the sticking-free fluidized bed reduction of titanomagnetite (TTM) ironsand at 1223 K in Ar-H{sub 2} gas mixtures. We show that sticking is prevented by the formation of a protective titanium-rich oxide shell around each particle during the initial reduction stage. This protective shell prevents iron-iron contact between particles throughout the reduction process, enabling metallization degrees of 93 pct to be attained without sticking occurring. Phase evolution during the reaction has also been analyzed using q-X-ray diffraction and scanning electron microscope/energy dispersed spectroscopy. We find that the reduction proceeds through four separate stages. During the initial stage, approximately half of the initial TTM phase is converted to wüstite, forming a network of sub-micron wüstite channels which interlace the TTM matrix. During this stage, Ti and Al are enriched within the TTM matrix, due to the low solubility of both species in wüstite. This enrichment stabilizes the remaining TTM, meaning that wüstite is then preferentially reduced to metallic iron in stage 2 of the reduction. In stage 3, the remaining Ti-enriched TTM is reduced directly to metallic iron and ilmenite. The final stage of reduction involves the conversion of ilmenite into rutile and pseudobrookite. Our findings clarify the important role played by titanium species during the reduction of TTM and suggest that New Zealand ironsand can offer significant advantages over conventional hematite ores when used as a feedstock for fluidized bed direct-reduced iron processes.

36 MATERIALS SCIENCE↗

Development of Graphene Nanoplatelet-Reinforced AZ91 Magnesium Alloy by Solidification Processing

It is a challenging task to effectively incorporate graphene nanoplatelets (GNPs) which have recently emerged as potential reinforcement for strengthening metals into magnesium-based matrices by conventional solidification processes due to their large surface areas and poor wettability. A solidification processing which combines mechanical stirring and ultrasonic dispersion of reinforcements in liquid matrix was employed to develop AZ91 magnesium alloy matrix composites reinforced with 0.25 and 0.5 wt.% GNPs. The microstructural studies conducted with scanning and transmission electron microscopes revealed that fairly uniform distribution and dispersion of GNPs through the matrix were achieved due to effective combination of mechanical and ultrasonic stirring. The GNPs embedded into the magnesium matrix led to significant enhancement in the hardness, tensile strength and ductility of the composites compared to those of unreinforced AZ91 alloy. The strength enhancement was predominantly attributed to the grain refinement by the GNP addition and dislocation generation strengthening due to the coefficient of thermal expansion mismatch between the matrix and reinforcement. The improved ductility was attributed to the refinement of β eutectics by transforming from lamellar to the divorced eutectics due to the GNP additions. In addition, the strengthening efficiency of the composite with 0.25 wt.% GNP was found to be higher than those of the composite with 0.5 wt.% GNP as the agglomeration tendency of GNPs is increased with increasing GNP content. These results were compared with those of the GNP-reinforced magnesium composites reported in the literature, indicating the potential of the process introduced in this study in terms of fabricating light and high-performance metal matrix composites.

36 MATERIALS SCIENCE↗

Impact of Nanofillers Incorporation on Laminated Nanocomposites Performance

Epoxy-based laminated composites containing recently developed woven Kevlar KM2Plus fibers and three different nanofillers [silicon carbide (SiC), aluminum oxide (Al{sub 2}O{sub 3}) and multi-wall carbon nanotubes (MWCNT)] were fabricated using wet layup method. The addition of the nanofillers produced thermally stable nanocomposites with improved mechanical performance. MWCNT nanocomposites showed the best performance at 0.5 wt.% MWCNT content above which agglomeration degraded the mechanical performance.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Aligned Carbon Nanotube Reinforced Silicon Carbide Composites by Chemical Vapor Infiltration

Owing to their exceptional stiffness and strength1 4, carbon nanotubes (CNTs) have long been considered to be an ideal reinforcement for light-weight, high-strength, and high-temperature-resistant ceramic matrix composites (CMCs)5 10. However, the research and development in CNT-reinforced CMCs have been greatly hindered due to the challenges related to manufacturing including poor dispersion, damages during dispersion, surface modification, densification and sintering, weak tube/matrix interfaces, and agglomeration of tubes at the matrix grain boundaries5,11. Here we report the fabrication of high-quality aligned CNT/SiC composites by chemical vapor infiltration (CVI), a technique that is being widely used to fabricate commercial continuous-filament CMCs12 15. Using the CVI technique most of the challenges previously encountered in the fabrication of CNT composites were readily overcome. Nanotube pullouts, an important toughening mechanism for CMCs, were consistently observed on all fractured CNT/SiC samples. Indeed, three-point bending tests conducted on individual CNT/SiC nanowires (diameters: 50 200 nm) using an atomic force microscope show that the CNT-reinforced SiC nanowires are about an order of magnitude tougher than the bulk SiC. The tube/matrix interface is so intimate and the SiC matrix is so dense that a ~50-nm-thick SiC coating can effectively protect the inside nanotubes from being oxidized at 1600 C in air. The CVI method may be extended to produce nanotube composites from a variety of matrix

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of fly ash microsphere on the rheology and microstructure of alkali-activated fly ash/slag pastes

Highlights: • Fly ash microsphere is collected from fly ash with electrostatic adsorption classification. • Fly ash microsphere acts as 'ball-bearings' in alkali-activated cements. • Fly ash microsphere works as inorganic dispersing agent to improve workability. • Fly ash microsphere exhibits a good compatibility in alkali-activated cements. - Abstract: The highly viscous property of alkali silicate-activated cements is one of the critical challenges that hinder their wide application. The present study focuses on ameliorating the rheological performance of sodium silicate-activated fly ash/slag pastes by using fly ash microsphere (FAM), which are highly spherical particles collected from fly ash with electrostatic adsorption classification technology. The FAM particles work as 'ball-bearings' in the pastes to reduce the internal friction between fly ash and slag grains, and meanwhile mitigate the agglomeration of flocs and fragmentation to release the locked water. The interrelationship between the FAM particle geometry and plastic viscosity of the paste is well described by the Krieger-Dougherty equation, which supports the proposed mechanisms of 'ball-bearings' effects. FAM can work as an inorganic dispersing agent to improve the workability of alkali-activated cement products for a variety of application aspects.

36 MATERIALS SCIENCE↗

Influence of mixing on the generation of nanoparticles in cement systems

In this work, we study the effect of mixing intensity on the size and concentration of nanoparticles in quartz and cement systems. We vary the local shear rate in the studied suspensions induced by mixing by either changing solid volume fraction or mixing speed. Our results obtained on quartz, cement and quartz-cement suspensions provide a master curve relating the concentration of nanoparticles in the pore solution as a function of the local shearing conditions computed at a micromechanical level. Our results suggest, in accordance with literature, that high mixing intensity is at the origin of a detachment of nano-hydrates from the surface of cement particles. These nanoparticles can be stabilized and therefore detected in the pore-solution only in the presence of superplasticizers, which inhibit their agglomeration to other particles.

36 MATERIALS SCIENCE↗

Prehydration of calcium sulfoaluminate (CSA) clinker at different relative humidities

The use of CSA cement in practice has been hindered by its unstable performance and short shelf-life caused by the prehydration of CSA clinker. In this study, the effect of ambient humidity on the prehydration rate and process of CSA clinker was investigated. The prehydration degree, ageing progress, and the dynamic change of mineral composition of CSA clinker exposed to five different relative humidities (ranging from 23% to 98%) for up to 180 days were studied. Experiments revealed that the ambient humidity of 60% RH can be considered a threshold value for storage of CSA clinker. Exposure of CSA clinker to RH higher than 60% will not only result in a significant decrease of hydraulic reactivity, but also in agglomeration of the clinker. Although the exposure of CSA clinker to RH lower than 60% has little effect on the hydraulic reactivity, the main hydration peak was found to be slightly delayed with the increase of RH.

36 MATERIALS SCIENCE↗

Fluidized bed combustion of pelletized biomass and waste-derived fuels

The fluidized bed combustion of three pelletized biogenic fuels (sewage sludge, wood, and straw) has been investigated with a combination of experimental techniques. The fuels have been characterized from the standpoints of patterns and rates of fuel devolatilization and char burnout, extent of attrition and fragmentation, and their relevance to the fuel particle size distribution and the amount and size distribution of primary ash particles. Results highlight differences and similarities among the three fuels tested. The fuels were all characterized by limited primary fragmentation and relatively long devolatilization times, as compared with the time scale of particle dispersion away from the fuel feeding ports in practical FBC. Both features are favorable to effective lateral distribution of volatile matter across the combustor cross section. The three fuels exhibited distinctively different char conversion patterns. The high-ash pelletized sludge burned according to the shrinking core conversion pattern with negligible occurrence of secondary fragmentation. The low-ash pelletized wood burned according to the shrinking particle conversion pattern with extensive occurrence of secondary fragmentation. The medium-ash pelletized straw yielded char particles with a hollow structure, resembling big cenospheres, characterized by a coherent inorganic outer layer strong enough to prevent particle fragmentation. Inert bed particles were permanently attached to the hollow pellets as they were incorporated into ash melts. Carbon elutriation rates were very small for all the fuels tested. For pelletized sludge and straw, this was mostly due to the shielding effect of the coherent ash skeleton. For the wood pellet, carbon attrition was extensive, but was largely counterbalanced by effective afterburning due to the large intrinsic reactivity of attrited char fines. The impact of carbon attrition on combustion efficiency was negligible for all the fuels tested. The size distribution of primary ash particles liberated upon complete carbon burnoff largely reflected the combustion pattern of each fuel. Primary ash particles of size nearly equal to that of the parent fuel were generated upon complete burnoff of the pelletized sludge. Nonetheless, secondary attrition of primary ash from pelletized sludge is large, to the point where generation of fine ash would be extensive over the typical residence time of bed ash in fluidized bed combustors. Very few and relatively fine primary ash particles were released after complete burnoff of wood pellets. Primary ash particles remaining after complete burnoff of pelletized straw had sizes and shapes that were largely controlled by the occurrence of ash agglomeration phenomena. (author)

09 BIOMASS FUELS↗

The effect of low-NO{sub x} combustion on residual carbon in fly ash and its adsorption capacity for air entrainment admixtures in concrete

Fly ash from pulverized coal combustion contains residual carbon that can adsorb the air-entraining admixtures (AEAs) added to control the air entrainment in concrete. This is a problem that has increased by the implementation of low-NO{sub x} combustion technologies. In this work, pulverized fuel has been combusted in an entrained flow reactor to test the impact of changes in operating conditions and fuel type on the AEA adsorption of ash and NO{sub x} formation. Increased oxidizing conditions, obtained by improved fuel-air mixing or higher excess air, decreased the AEA requirements of the produced ash by up to a factor of 25. This was due to a lower carbon content in the ash and a lower specific AEA adsorptivity of the carbon. The latter was suggested to be caused by changes in the adsorption properties of the unburned char and a decreased formation of soot, which was found to have a large AEA adsorption capacity based on measurements on a carbon black. The NO{sub x} formation increased by up to three times with more oxidizing conditions and thus, there was a trade-off between the AEA requirements of the ash and NO{sub x} formation. The type of fuel had high impact on the AEA adsorption behavior of the ash. Ashes produced from a Columbian and a Polish coal showed similar AEA requirements, but the specific AEA adsorptivity of the carbon in the Columbian coal ash was up to six times higher. The AEA requirements of a South African coal ash was unaffected by the applied operating conditions and showed up to 12 times higher AEA adsorption compared to the two other coal ashes. This may be caused by larger particles formed by agglomeration of the primary coal particles in the feeding phase or during the combustion process, which gave rise to increased formation of soot. (author)

01 COAL, LIGNITE, AND PEAT↗

Controllable stacked disk morphologies of charged diblock copolymers

Monte Carlo simulations are used to demonstrate the controlled stacking of charged block copolymer disk morphologies that can be obtained under certain thermodynamic conditions. We examine a partially charged block copolymer where 75% of the blocks are neutral and 25% of the blocks are charged. The presence of strong electrostatic interactions promotes charge agglomeration thereby changing morphologies in these systems. This study relates different thermodynamic quantities for which disk-like stackings can be obtained. The long-range order can be sustained even if hydrophobicity is increased albeit with lower dimensional structures. Our simulation results agree very well with recent experiments and are consistent with theoretical observations of counterion adsorption on flexible polyelectrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantitative assessment of particle dispersion in polymeric composites and its effect on mechanical properties

In this work, an automated image analysis tool is developed to establish quantitative correlations between the particle/cluster size distribution and the mechanical properties of particle reinforced polymer composites (PRPC).This automated image analysis tool is developed within python programming software to process and analyze the microstructural images of the polymerbased composite materials. The spent coffee bean powder (SCBP) reinforced poly-propylene carbonate (PPC) polymer composite with differing wt.% of the filler is selected for the analysis. Detailed statistical analysis of the microstructural images reveals that ‘clustering of clusters’ is also presented in addition to the most commonly reported ‘clustering of particles’, and the distribution of particle/clusters is bimodal. Based on these findings, an effective volume fraction for the filler material is proposed to mainly capture the agglomeration effect. With this effective volume fraction, the standard rule-of-mixture model correctly captures the experimentally measured tensile strength and modulus as a function of filler wt.%. Further, the applicability of this effective volume fraction for other theoretical models is also analyzed. The detailed statistical analysis of the microstructure and the proposed effective volume fraction helps to develop a deeper quantitative understanding of the PRPC than the conventional qualitative correlation of microstructural features with the properties and failure processes.

36 MATERIALS SCIENCE↗

Crystallization during processing of nuclear waste glass

In glass processing situations involving glass crystallization, various crystalline forms nucleate, grow, and dissolve, typically in a nonuniform temperature field of molten glass subjected to convection. Nuclear waste glasses are remarkable examples of multicomponent vitrified mixtures involving partial crystallization. In the glass melter, crystals form and dissolve during batch-to-glass conversion, melter processing, and product cooling. Crystals often agglomerate and sink, and they may settle at the melter bottom. Within the body of cooling glass, multiple phases crystallize in a non-uniform time-dependent temperature field. Self-organizing periodic distribution (the Liesegnang effect) is common. Various crystallization phenomena that occur in glassmaking are reviewed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Nanosized copper ferrite materials: Mechanochemical synthesis and characterization

Nanodimensional powders of cubic copper ferrite are synthesized by two-steps procedure of co-precipitation of copper and iron hydroxide carbonates, followed by mechanochemical treatment. X-ray powder diffraction, Moessbauer spectroscopy and temperature-programmed reduction are used for the characterization of the obtained materials. Their catalytic behavior is tested in methanol decomposition to hydrogen and CO and total oxidation of toluene. Formation of nanosized ferrite material is registered even after one hour of milling time. It is established that the prolonging of treatment procedure decreases the dispersion of the obtained product with the appearance of Fe{sub 2}O{sub 3}. It is demonstrated that the catalytic behavior of the samples depends not only on their initial phase composition, but on the concomitant ferrite phase transformations by the influence of the reaction medium. -- Graphical abstract: It is demonstrated that the catalytic behavior of the obtained copper ferrites depends not only on their initial phase composition, but on the concomitant phase transformations by the influence of the reaction medium. Display Omitted Highlights: {yields} Two-step co-precipitation-ball-milling procedure for copper ferrites preparation. {yields} The phase composition of ferrites depends on the milling duration. {yields} Ferrites transforms under the reaction medium, which affects their catalytic behavior. {yields} Ferrites decompose to magnetite and carbides during methanol decomposition. {yields} Agglomeration and further crystallization of ferrite occur during toluene oxidation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

LiMn{sub 2}O{sub 4} nanoparticles anchored on graphene nanosheets as high-performance cathode material for lithium-ion batteries

Nanocrystalline LiMn{sub 2}O{sub 4}/graphene nanosheets nanocomposite has been successfully synthesized by a one-step hydrothermal method without post-heat treatment. In the nanocomposite, LiMn{sub 2}O{sub 4} nanoparticles of 10–30 nm in size are well crystallized and homogeneously anchored on the graphene nanosheets. The graphene nanosheets not only provide a highly conductive matrix for LiMn{sub 2}O{sub 4} nanoparticles but also effectively reduce the agglomeration of LiMn{sub 2}O{sub 4} nanoparticles. The nanocrystalline LiMn{sub 2}O{sub 4}/graphene nanosheets nanocomposite exhibited greatly improved electrochemical performance in terms of specific capacity, cycle performance, and rate capability compared with the bare LiMn{sub 2}O{sub 4} nanoparticles. The superior electrochemical performance of the nanocrystalline LiMn{sub 2}O{sub 4}/graphene nanosheets nanocomposite makes it promising as cathode material for high-performance lithium-ion batteries. - Graphical abstract: Nanocrystalline LiMn{sub 2}O{sub 4}/graphene nanosheets (GNS) nanocomposite exhibit superior cathode performance for lithium-ion batteries compared to the bare LiMn{sub 2}O{sub 4} nanoparticles. Display Omitted - Highlights: • LiMn{sub 2}O{sub 4}/graphene nanocomposite is synthesized by a one-step hydrothermal method. • LiMn{sub 2}O{sub 4} nanoparticles are uniformly anchored on the graphene nanosheets. • The nanocomposite exhibits excellent cathode performance for lithium-ion batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced magnetic behaviors of CoPt nanoparticles by addition of SiO{sub 2}

Equiatomic L1{sub 0} CoPt alloy nanoparticles (NPs) with various contents of SiO{sub 2} are synthesized by the simple sol–gel method. The SiO{sub 2} additions restrain the growth of grain and hinder the agglomeration formation. The coercivity increases first and then decreases with SiO{sub 2} addition. Compared to the 0 μl-SiO{sub 2} CoPt NPs, the higher ordering degree and better magnetic properties are obtained by the addition of amount 10 μl SiO{sub 2} in our sample. And the coercivity is two times as large as that of 0 μl-SiO{sub 2} NPs. When the addition of SiO{sub 2} is more than 10 μl, the deteriorated magnetic properties are ascribed to the transformation from hard magnetically phase to soft magnetically phase due to the decrease of particle size. - Graphical abstract: L1{sub 0} CoPt alloy nanoparticles with various contents of SiO{sub 2} are synthesized by sol–gel method. The effects of SiO{sub 2} on the structure and magnetic properties of CoPt nanoparticles are investigated. - Highlights: • The L1{sub 0} CoPt–SiO{sub 2} nanoparticles (NPs) were synthesized by sol–gel method. • Effects of SiO{sub 2} content on the structure and magnetic properties were investigated. • The addition of SiO{sub 2} restrained the growth of particle size. • CoPt–10 μl SiO{sub 2} NPs showed a higher ordering degree and better magnetic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗