Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Bimetallic Ag‐Pt Sub‐nanometer Supported Clusters as Highly Efficient and Robust Oxidation Catalysts

Abstract A combined experimental and theoretical investigation of Ag‐Pt sub‐nanometer clusters as heterogeneous catalysts in the CO→CO 2 reaction (COox) is presented. Ag 9 Pt 2 and Ag 9 Pt 3 clusters are size‐selected in the gas phase, deposited on an ultrathin amorphous alumina support, and tested as catalysts experimentally under realistic conditions and by first‐principles simulations at realistic coverage. In situ GISAXS/TPRx demonstrates that the clusters do not sinter or deactivate even after prolonged exposure to reactants at high temperature, and present comparable, extremely high COox catalytic efficiency. Such high activity and stability are ascribed to a synergic role of Ag and Pt in ultranano‐aggregates, in which Pt anchors the clusters to the support and binds and activates two CO molecules, while Ag binds and activates O 2 , and Ag/Pt surface proximity disfavors poisoning by CO or oxidized species.

Negreiros, Fabio R.↗

Au 130− x Ag x Nanoclusters with Non‐Metallicity: A Drum of Silver‐Rich Sites Enclosed in a Marks‐Decahedral Cage of Gold‐Rich Sites

Abstract The synthesis and structure of atomically precise Au 130− x Ag x (average x= 98) alloy nanoclusters protected by 55 ligands of 4‐ tert ‐butylbenzenethiolate are reported. This large alloy structure has a decahedral M 54 (M=Au/Ag) core. The Au atoms are localized in the truncated Marks decahedron. In the core, a drum of Ag‐rich sites is found, which is enclosed by a Marks decahedral cage of Au‐rich sites. The surface is exclusively Ag−SR; X‐ray absorption fine structure analysis supports the absence of Au−S bonds. The optical absorption spectrum shows a strong peak at 523 nm, seemingly a plasmon peak, but fs spectroscopic analysis indicates its non‐plasmon nature. The non‐metallicity of the Au 130− x Ag x nanocluster has set up a benchmark to study the transition to metallic state in the size evolution of bimetallic nanoclusters. The localized Au/Ag binary architecture in such a large alloy nanocluster provides atomic‐level insights into the Au−Ag bonds in bimetallic nanoclusters.

Higaki, Tatsuya↗

Au 130− x Ag x Nanoclusters with Non‐Metallicity: A Drum of Silver‐Rich Sites Enclosed in a Marks‐Decahedral Cage of Gold‐Rich Sites

Abstract The synthesis and structure of atomically precise Au 130− x Ag x (average x= 98) alloy nanoclusters protected by 55 ligands of 4‐ tert ‐butylbenzenethiolate are reported. This large alloy structure has a decahedral M 54 (M=Au/Ag) core. The Au atoms are localized in the truncated Marks decahedron. In the core, a drum of Ag‐rich sites is found, which is enclosed by a Marks decahedral cage of Au‐rich sites. The surface is exclusively Ag−SR; X‐ray absorption fine structure analysis supports the absence of Au−S bonds. The optical absorption spectrum shows a strong peak at 523 nm, seemingly a plasmon peak, but fs spectroscopic analysis indicates its non‐plasmon nature. The non‐metallicity of the Au 130− x Ag x nanocluster has set up a benchmark to study the transition to metallic state in the size evolution of bimetallic nanoclusters. The localized Au/Ag binary architecture in such a large alloy nanocluster provides atomic‐level insights into the Au−Ag bonds in bimetallic nanoclusters.

Higaki, Tatsuya↗

Self‐Stabilized Heterometallic Pair Sites for Selective Ethanol Dehydrogenation on Pt–Cr–Ag Alloy Catalysts

Self‐stabilized, heterometallic pair‐sites can enable fine‐tuning of catalytic functionality while also mitigating dynamic structural changes that degrade catalytic performance. This study demonstrates the development and characterization of trimetallic Pt x Cr x Ag 1‐2x ( x ≤ 0.1) alloys with active Pt–Cr pair‐ensembles for non‐oxidative ethanol dehydrogenation, leveraging predictions that favorable bonding stabilizes Pt–Cr pairs diluted in Ag. Operando X‐ray absorption spectroscopy confirms the preferential formation and stability of Pt–Cr pairings dispersed throughout the Ag matrix, and ambient‐pressure X‐ray photoelectron spectroscopy shows that Pt–Cr sites have significant activity for ethanol dehydrogenation, while suppressing reaction processes that deactivate binary Pt–Ag and Cr–Ag alloys. This work demonstrates that stabilizing heterometallic pair sites within trimetallic alloys provides a new avenue for designing catalysts with discrete active sites that are durable and highly selective.

36 MATERIALS SCIENCE↗

Synthesis and Characterization of Pt‐Ag Icosahedral Nanocages with Enhanced Catalytic Activity toward Oxygen Reduction

Abstract There is an urgent need to develop cost‐effective electrocatalysts based on Pt for a broad spectrum of applications, including those vital to the operation of fuel cells. Hollowing out the interior of Pt nanocrystals offers a simple and viable strategy for maximizing the utilization efficiency of this precious metal while enhancing the electrocatalytic performance. Herein, we report the synthesis and electrocatalytic evaluation of Pt−Ag icosahedral nanocages with an average wall thickness of 1.6 nm. The Pt atoms are coated on the surface of Ag icosahedral seeds, leading to the formation of Ag@Pt nL core‐shell icosahedral nanocrystals with tunable shell thicknesses. The core‐shell nanocrystals are then converted to icosahedral nanocages by selectively etching away the Ag in the core. The as‐obtained nanocages with a composition of Pt 4.5 Ag exhibit an almost 3‐fold enhancement in specific activity toward oxygen reduction relative to the commercial Pt/C in acid media.

Wang, Wenxia↗

Self–Destruction of Cancer Induced by Ag 2 S Amorphous Nanodots

Studies on distinctive performances and novel applications of amorphous inorganic nanomaterials are becoming attractive. Herein, Ag 2 S amorphous and crystalline nanodots (ANDs and CNDs) are prepared via facile methods. In vitro and in vivo studies indicate that Ag 2 S ANDs, rather than CNDs, can induce the self-destruction of tumors, which can be attributed to their distinctive chemical properties, e.g., the higher electrochemical active surface area and lower redox potential well matching with the redox reaction requirement in the tumor microenvironment. Ag 2 S ANDs can be oxidized by intracellular reactive oxygen species (ROS) to release Ag + , which further stimulates high generation of intracellular ROS. This mutual stimulation damages the mitochondria, induces apoptosis, and leads to the self-destruction of the tumor. Moreover, Ag 2 S ANDs do not show observable in vitro and in vivo side effects. Furthermore, these findings provide a promising self-destructive strategy for cancer therapy by utilizing distinctive chemical properties of inorganic nanomaterials, while avoiding complicated external assistance.

60 APPLIED LIFE SCIENCES↗

Arabic Gum as Bio-Synthesizer for Ag–Au Bimetallic Nanocomposite Using Seed-Mediated Growth Technique and Its Biological Efficacy

Bio-synthesis of nanostructures is an ever green approach; therefore, the current work attempts to use Arabic gum as bio-synthesizer for manufacturing Ag–Au bimetallic nanocomposite, using seed-mediated growth technique. The relevance of the as-used natural gums for manufacturing of Ag–Au nanocomposite in quite simple, energy saving and cost effective methodology, has been successfully approved. Arabic gum acted concurrently as a reducer for metal ions to nano-sized structures and crystal growth modifier of the so-generated nanocomposite. Monitoring of interchanging in size distribution of the as-produced bimetallic nanocomposite by the effect of the gum concentration, concentration of nanometals precursors, their addition sequencing in reaction liquor, and reaction temperature, was illustrated and well characterized. UV–Visible spectra showed that the characteristic surface plasmon resonance peak for Ag–Au bimetallic nanocomposite was observed at 480–495 nm and XRD patterns confirmed the preparation of bimetallic nanostructures. According to zetasizer analyses and TEM micrographs, small sized (3.1 nm) Ag–Au bimetallic nanocomposite with narrow size distribution (1–7 nm) were obtained. The all prepared bimetallic nanocomposite showed good stability with polydispersity index ranged in 0.203–0.530. The mechanism of nanostructures’ generation was suggested and approved using FT-IR, 1HNMR and 13CNMR spectra. The prepared Ag–Au bimetallic nanocomposites showed excellent antibacterial activity against both of gram + ve and gram − ve strains.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Orientation Behavior and Mechanism of Ag-doped GdBa2Cu3O7-δ Superconducting thin Films Derived by Metal Organic Deposition

Ag-doped GdBa{sub 2}Cu{sub 3}O{sub 7−δ} (GdBCO)-coated conductors are fabricated via a metal-organic process. The X-ray diffraction and scanning electron microscopy results show that the growth conditions of the GdBa{sub 2}Cu{sub 3}O{sub 7−δ} matrix are modified, resulting in less a-axis growth and much smoother surface morphology and finally giving rise to much improvement of superconducting performance in a wide range of processing parameters. The orientation behavior and mechanism of Ag-doped GdBCO films are investigated. To reasonably explain the orientation behavior of Ag-doped GdBCO films, a simple nucleation model for Ag-doped GdBCO is established, suggesting quasi-liquid phases are perfected by Ag. As a consequence, a-axis nucleation is suppressed and strong c-axis nucleation is achieved in a wider processing window.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of Origin of Attached Cu-Ag Droplets to Solid Particles During High-Temperature Slag/Copper/Spinel Interactions

This study investigates the origin of mechanically entrained metal droplets in liquid slag due to their interaction with solid spinel particles. Two possible mechanisms were proposed previously: separately formed droplets and spinel particles get attached to each other due to agitation of the slag and metal phases; or the spinel particles form by a chemical reaction together with a new droplet or alongside a droplet that was already present in the system. In this study, an inert tracer element was added to the metallic phase in adapted sessile drop experiments. For this purpose, Cu-Ag alloys, with various Ag-contents, were produced. The results showed that the small entrained metal droplets within the slag droplet contained Ag, but in very low amounts with respect to the amount of Ag in the Cu-Ag alloy. This indicates that the entrained metal droplets are formed due to a sequential combination of the two origins: first, very small metal droplets are dispersed in the slag drop, due to the emulsification process. Then, these metal droplets are nucleation sites for the Cu-spinel reactive formation.

36 MATERIALS SCIENCE↗

Tribological Performance of M50-Ag-TiC Self-Lubricating Composites at Elevated Temperature

M50 steel is widely used in aero-engine bearings and other high-temperature bearings. However, the poor wear of M50 steel resistance restrains its further applications. In this paper, the sliding tribological behaviors of M50 steel, M50-Ag composites (MAC) and M50-Ag-TiC composites (MATC) against Si{sub 3}N{sub 4} ball were investigated from 150 to 600 °C at 15 N-0.2 m/s. MATC showed better tribological properties in comparison with M50 and MAC. Especially at 450 °C, MATC obtained the lowest friction coefficient of 0.15 and smallest wear rate of 1.3 × 10{sup −5} mm{sup 3} N{sup −1} m{sup −1}. The excellent tribological performance of MATC during the friction test was attributed to the continuous lubricating film containing lubricant Ag and reinforcement TiC, as well as the subsurface compacted layer that could well support the lubricating film to prevent it from being destroyed. At 600 °C, because of the tribo-chemical reaction between Ag and Mo oxide during sliding process, the newly formed Ag{sub 2}MoO{sub 4} lubricating film was well spread out on the friction surface, which could continuously improve the tribological behavior of MATC. This investigation was meaningful to improve the anti-friction and wear resistance of M50 matrix bearing over a wide temperature range.

36 MATERIALS SCIENCE↗

The Sliding Wear and Frictional Behavior of M50-10 wt.%(Sn-Ag-Cu) Self-Lubricating Materials at Elevated Temperatures

As the main steel used in the aero-engine main shaft bearings, the tribological properties of M50 can directly affect the performance of aero-engine. The purpose of this study is to design the reasonable composition of Sn-Ag-Cu alloy and investigate the wear mechanisms of M50-10 wt.%(Sn-Ag-Cu) composites (MSACC) prepared by SPS sliding against Si{sub 3}N{sub 4} ball from 25 to 550 °C at 12 N-0.25 m/s. XRD, EPMA, FESEM and EDS mappings are conducted to understand the major mechanisms leading to the improvement in the sliding behavior of MSACC. The results indicate that MSACC with different specifications of Sn-Ag-Cu alloy shows excellent friction and wear properties from 25 to 550 °C compared to M50. M50-10 wt.%(50Sn40Ag10Cu) (MSACC-2) shows the distinguished tribological performance for the lower friction coefficients of 0.22-0.61 and less wear rates of 1.7-4.1 × 10{sup −6} mm{sup 3} N{sup −1} m{sup −1}, which is attributed to the formed excellent lubricating structure consisting of the lubricating film with massive Sn-Ag-Cu alloy and intermetallic compounds formed during the friction process, as well as the underneath mixed layer who can well support the lubricating film due to the good intersolubility between the designed Sn-Ag-Cu alloy and M50 (Fe).

36 MATERIALS SCIENCE↗

Crystal structures of pan-IDH inhibitor AG-881 in complex with mutant human IDH1 and IDH2

Some mutations of isocitrate dehydrogenase 1 and 2 observed in multiple kinds of malignant tumors can lead to a neomorphic enzyme activity that converts alpha-ketoglutarate (α-KG) to 2-hydroxyglutarate (2-HG). As an oncometabolite, 2-HG can cause epigenetic changes and impair cell differentiation. Inhibiting the activity of isocitrate dehydrogenase mutants (mIDH) is considered to be an effective therapy for the treatment of mIDH positive cancers, including glioma and acute myeloid leukemia (AML). The presently disclosed allosteric inhibitors work only on one of the mIDH1 and mIDH2, and it is shown that mIDH1 and mIDH2 have different allosteric inhibition pockets. However, AG-881 from Agios Pharmaceuticals was found to be a pan-IDH inhibitor against both mIDH1 and mIDH2, and is undergoing Phase I clinical trials for tumors with an IDH1 and/or IDH2 mutation. To understand the binding mode of AG-881 to mIDHs, we solved the crystal structures of IDH1-R132H/NADPH/AG-881 and IDH2-R140Q/NADPH/AG-881 complexes, and acquired the IC{sub 50} values of AG-881 for IDH1-R132H and IDH2-R140Q homodimers after different pre-incubation times. Our data show that AG-881 binds IDH1-R132H and IDH2-R140Q in the same allosteric pockets and that the subtle difference in the pockets of these two proteins may contribute to their remarkably different inhibitory kinetics by AG-881. The structural pharmacological data provided in this report may benefit the future development of pan-IDH inhibitors targeting mIDH1 and mIDH2.

60 APPLIED LIFE SCIENCES↗

Optoelectronic properties of candidate photovoltaic Cu 2 PbSiS 4 , Ag 2 PbGeS 4 and KAg 2 SbS 4 semiconductors

High temperature synthesis and optical band gaps are reported for three candidate photovoltaic earth-abundant Cu 2 PbSiS 4 , Ag 2 PbGeS 4 and KAg 2 SbS 4 semiconductors. The reported synthesis method is found to be more advantageous for KAg 2 SbS 4 compared to the literature reported synthesis utilizing supercritical ammonia as a reaction medium, which produces a mixture of chalcogenide products. Based on optical diffuse reflectance data, Cu 2 PbSiS 4 , Ag 2 PbGeS 4 and KAg 2 SbS 4 have band gaps in the 1.6–1.8 eV range, and are shown to be stable in ambient air for a period of 6 weeks, making them attractive candidates for solar cell applications. Density functional theory (DFT) calculations indicate indirect band gaps for Cu 2 PbSiS 4 and KAg 2 SbS 4 , and a nearly direct band gap for Ag 2 PbGeS 4 with the calculated difference between indirect and direct gaps of only 30 meV. The p-type semiconducting behavior of Cu 2 PbSiS 4 , Ag 2 PbGeS 4 is also verified by the transport measurments. The 3D connectivity of the polyanionic networks in these compounds results in dispersive valence and conduction bands, which is especially noticeable for KAg 2 SbS 4 . This fact is in part attributed to the presence of formally pentavalent SbV in this compound leading to empty Sb 5s orbitals in the conduction band. Finally, we discuss the potential of Cu 2 PbSiS 4 , Ag 2 PbGeS 4 and KAg 2 SbS 4 for photovoltaic applications based on synthesis, stability, band gap and electronic structure considerations.

14 SOLAR ENERGY↗

Evolution of steady-state material properties during catalysis: Oxidative coupling of methanol over nanoporous Ag 0.03 Au 0.97

Activating pretreatments are used to tune surface composition and structure of bimetallic-alloy catalysts. Herein, the activation-induced changes in material properties of a nanoporous Ag 0.03 Au 0.97 alloy and their subsequent evolution under steady-state CH 3 OH oxidation conditions are investigated. Activation using O 3 results in AgO and Au 2 O 3 , strongly enriching the near-surface region in Ag. These oxides reduce in the O 2 /CH 3 OH mixture, yielding CO 2 and producing a highly Ag-enriched surface alloy. At the reaction tem-perature (423 K), Ag realloys gradually with Au but remains enriched (stabilized by surface O) in the top few nanometers, producing methyl formate selectively without significant deactivation. At higher tem-peratures, bulk diffusion induces sintering and Ag redistribution, leading to a loss of activity. These find-ings demonstrate that material properties determining catalytic activity are dynamic and that metastable (kinetically trapped) forms of the material may be responsible for catalysis, providing guiding principles concerning the activation of heterogeneous catalysts for selective oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Conversion of ethanol to 1,3–butadiene over Ag–ZrO 2 /SiO 2 catalysts: The role of surface interfaces

A series of Ag–ZrO 2 /SiO 2 catalysts with different metal–support interfaces were synthesized in an effort to elucidate the roles of specific interfaces in controlling the ethanol to 1,3–butadiene conversion and selectivity. According to the results of detailed characterizations (e.g. CO/pyridine–DRIFTS, XPS, TEM, NH 3 –TPD, and 1 H MAS NMR), it was found that the Ag–O–Si interfaces significantly enhanced the dehydrogenation of ethanol while the presence of ZrO 2 improved the interaction between Ag and ZrO 2 /SiO 2 , creating more Ag δ+ active sites. In this research, the high dispersion of ZrO 2 on SiO 2 generated abundant Zr–O–Si interfaces with medium and weak Lewis acidity, promoting the condensation of acetaldehyde to crotonaldehyde. These Zr–O–Si interfaces in close interaction with Ag δ+ species played a critical role in the enhanced H transfer during the MPV reduction of crotonaldehyde to crotyl alcohol. The synergies among the interfaces resulted in retarded ethanol dehydration reactivity, balanced ethanol dehydrogenation and condensation reactions, and a subsequent high 1,3–butadiene yield.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recrystallization of Cu-poor CuInS{sub 2} assisted by metallic Cu or Ag

We monitor the recrystallization of Cu-poor CuInS{sub 2} thin films assisted by pure Cu or pure Ag by means of real-time synchrotron-based polychromatic X-ray diffraction. In both cases a new microstructure is formed accompanied by an increase in grain size. In the case of Cu, the onset temperature of the thin-film recrystallization is higher than 370 deg. C. In the case of Ag, the thin-film recrystallization comes to an end at 270 deg. C. The Ag-assisted recrystallization occurs in the presence of the body-centered cubic beta-Ag{sub 2}S phase. We find that domain growth and diffusion of silver into the film occur simultaneously. - Graphical abstract Keywords: Recrystallization; Thin-film solar cells; Energy-dispersive x-ray diffraction: In-situ monitoring by means of energy-dispersive X-ray diffraction of the thin-film recrystallization of Cu-poor CuInS{sub 2} assisted by metallic Ag.

36 MATERIALS SCIENCE↗

Syntheses, structure and properties of three-dimensional pillared-layer Ag(I)-Ln(III) heterometallic coordination polymers based on mixed isonicotinate and hemimellitate ligands

Three pillared-layer 4d-4f Ag(I)-Ln(III) heterometallic coordination polymers (HCPs), formulated as [Ln{sub 2}Ag(hma){sub 2}(ina)(H{sub 2}O){sub 2}]{sub n} nH{sub 2}O [Ln=La(1), Pr(2), Nd(3); Hina=isonicotinic acid, H{sub 3}hma=hemimellitic acid], have been synthesized under hydrothermal conditions. Single-crystal and powder X-ray diffractions confirm that they are isostructural, which features a three-dimensional (3D) pillared-layer heterometallic structure built upon the strictly alternate arrangement of lanthanide-organic layers and [Ag(ina)] pillars. The layers and pillars are connected to each other by Ln-O and Ag-O coordination bonds. The photoluminescent property of the Nd derivative (3) has also been investigated. - Graphical abstract: Three pillared-layer 4d-4f Ag(I)-Ln(III) heterometallic coordination polymers have been synthesized and structurally characterized. Highlights: Black-Right-Pointing-Pointer Three 3D pillared-layer 4d-4f HCPs were synthesized by hydrothermal reactions. Black-Right-Pointing-Pointer The synergistic coordination strategy was employed. Black-Right-Pointing-Pointer It opens new perspective for the construction of structurally diversified 4d-4f HCPs.

36 MATERIALS SCIENCE↗

Ag{sub 1.75}InSb{sub 5.75}Se{sub 11}: A new noncentrosymmetric compound with congruent-melting behavior

A new type of quaternary selenide Ag{sub 1.75}InSb{sub 5.75}Se{sub 11} has been synthesized. It crystallizes in the non-centrosymmetric space group Cm of monoclinic system, with a=13.419 (1) Å, b=4.084 (1) Å, and c=19.165 (2) Å, Z=2. The compound has a new three-dimensional layer structure which consists of infinite {sup 2}{sub ∞}[AgSb{sub 2}Se{sub 4}] layers and {sup 2}{sub ∞}[Ag1(Sb6)Ag3InSb{sub 3}Se{sub 8}] layers. The band gap of Ag{sub 1.75}InSb{sub 5.75}Se{sub 11} is 0.94(2) eV, which agrees with its dark gray color. Moreover, the compound exhibits congruent-melting behavior. - Graphical abstract: Ag{sub 1.75}InSb{sub 5.75}Se{sub 11} has a new three-dimensional layer structure which consists of infinite {sup 2}{sub ∞}[AgSb{sub 2}Se{sub 4}] layers and {sup 2}{sub ∞}[Ag1(Sb6)Ag3InSb{sub 3}Se{sub 8}] layers. - Highlights: • The new quaternary selenide Ag{sub 1.75}InSb{sub 5.75}Se{sub 11} has been synthesized. • It crystallizes in non-centrosymmetric space group Cm and has a new layer structure. • The structure consists of {sup 2}{sub ∞}[AgSb{sub 2}Se{sub 4}] layers and {sup 2}{sub ∞}[Ag1(Sb6)Ag3InSb{sub 3}Se{sub 8}] layers. • The band gap of Ag{sub 1.75}InSb{sub 5.75}Se{sub 11} is 0.94(2) eV. • The compound exhibits congruent-melting behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗