Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADSORPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Final Report: Characterization of Hydrogen Adsorption in Carbon-Based Materials by NMR

In support of DOE/EERE's Fuel Cell Technologies Program Hydrogen Sorption Center of Excellence (HSCoE), UNC conducted Nuclear Magnetic Resonance (NMR) measurements that contributed spectroscopic information as well as quantitative analysis of adsorption processes. While NMR based Langmuir isotherms produce reliable H2 capacity measurements, the most astute contribution to the center is provided by information on dihydrogen adsorption on the scale of nanometers, including the molecular dynamics of hydrogen in micropores, and the diffusion of dihydrogen between macro and micro pores. A new method to assess the pore width using H2 as probe of the pore geometry was developed and is based on the variation of the observed chemical shift of adsorbed dihydrogen as function of H2 pressure. Adsorbents designed and synthesized by the Center were assessed for their H2 capacity, the binding energy of the adsorption site, their pore structure and their ability to release H2. Feedback to the materials groups was provided to improve the materials’ properties. To enable in situ NMR measurements as a function of H2 pressure and temperature, a unique, specialized NMR system was designed and built. Pressure can be varied between 10-4 and 107 Pa while the temperature can be controlled between 77K and room temperature. In addition to the 1H investigation of the H2 adsorption process, NMR was implemented to measure the atomic content of substituted elements, e.g. boron in boron substituted graphitic material as well as to determine the local environment and symmetry of these substituted nuclei. The primary findings by UNC are the following: • Boron substituted for carbon in graphitic material in the planar BC3 configuration enhances the binding energy for adsorbed hydrogen. • Arrested kinetics of H2 was observed below 130K in the same boron substituted carbon samples that combine enhanced binding energy with micropore structure. • Hydrogen storage material made from activated PEEK is well suited for hydrogen storage due to its controlled microporous structure and large surface area. • A new porosimetry method for evaluating the pore landscape using H2 as a probe was developed. 1H NMR can probe the nanoscale pore structure of synthesized material and can assess the pore dimension over a range covering 1.2 nm to 2.5 nm, the size that is desired for H2 adsorption. • Analysis of 1H NMR spectra in conjunction with the characterization of the bonding structure of the adsorbent by 13C NMR distinguishes between a heterogeneous and homogeneous pore structure as evidenced by the work on AX21 and activated PEEK. • Most of the sorbents studied are suited to hydrogen storage at low temperature (T < 100K). Of the materials investigated, only boron substituted graphite has the potential to work at higher temperatures if the boron content in the favorable planar BC3 configuration that actively contributes to adsorption can be increased.

08 HYDROGEN↗

Adsorption Refrigeration System

Adsorption refrigeration is an environmentally friendly cooling technology which could be driven by recovered waste heat or low-grade heat such as solar energy. In comparison with absorption system, an adsorption system has no problems such as corrosion at high temperature and salt crystallization. In comparison with vapor compression refrigeration system, it has the advantages of simple control, no moving parts and less noise. This paper introduces the basic theory of adsorption cycle as well as the advanced adsorption cycles such as heat and mass recovery cycle, thermal wave cycle and convection thermal wave cycle. The types, characteristics, advantages and drawbacks of different adsorbents used in adsorption refrigeration systems are also summarized. This article will increase the awareness of this emerging cooling technology among the HVAC engineers and help them select appropriate adsorption systems in energy-efficient building design.

14 SOLAR ENERGY↗

Finite Element Modeling of Adsorption Processes for Gas Separation and Purification

Pacific Northwest National Laboratory (PNNL) has expertise in the design and fabrication of automated radioxenon collection systems for nuclear explosion monitoring. In developing new systems there is an ever present need to reduce size, power consumption and complexity. Most of these systems have used adsorption based techniques for gas collection and/or concentration and purification. These processes include pressure swing adsorption, vacuum swing adsorption, temperature swing adsorption, gas chromatography and hybrid processes that combine elements of these techniques. To better understand these processes, and help with the development of improved hardware, a finite element software package (COMSOL Multiphysics) has been used to develop complex models of these adsorption based operations. The partial differential equations used include a mass balance for each gas species and adsorbed species along with a convection conduction energy balance equation. These equations in conjunction with multicomponent temperature dependent isotherm models are capable of simulating separation processes ranging from complex multibed PSA processes, and multicomponent temperature programmed gas chromatography, to simple two component temperature swing adsorption. These numerical simulations have been a valuable tool for assessing the capability of proposed processes and optimizing hardware and process parameters.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

NMR relaxometry characterization of water adsorption in corn stover anatomical fractions

Nuclear magnetic resonance (NMR) relaxometry is applied to provide direct measurement of water adsorption in anatomical fractions of corn stover. NMR transverse T 2 relaxation time distribution measurements indicate multiple water populations, which vary with anatomical fraction and water adsorption. Measured T 2 data are used to calculate thermodynamic properties of Brunauer-Emmet-Teller adsorption theory using a model to estimate mono and bilayer relaxation. T 2 data are used directly to determine rotational diffusion correlation times indicating adsorption interaction strength. T 1 -T 2 longitudinal-transverse relaxation time correlation measurements quantify differences in the molecular level structural order of the adsorbate surface water as a function of water activity, i.e. relative humidity or water vapor partial pressure. The T 1 /T 2 ratio provides a measure of the surface energy related to the adsorption strength and surface diffusive mobility of the water adsorbate and differentiates the anatomical fractions. Furthermore, the results indicate that direct measurement of NMR relaxation times can be used to characterize corn stover biomass water adsorption, data relevant to processing and handling considerations.

09 BIOMASS FUELS↗

Gibbs adsorption equation for planar fluid–fluid interfaces: Invariant formalism

Here, the fundamental underpinnings of the Gibbs adsorption equation (GAE) are enunciated including sundry choices for the location of the zero-volume dividing surface. Comparison is made to the finite-volume thermodynamic analyses of Guggenheim and Hansen. Given that Gibbs phase rule is properly invoked, only invariant surface properties appear in the GAE. In the framework of invariant surface properties, both the zero-volume (Gibbs) and the finite-volume (Guggenheim) treatments of the surface phase give identical results for the GAE, validating the thermodynamic generality and rigor of the expression. Application of the GAE is made to strong and weak electrolytes, to electrified interfaces (Lippmann equation), and to surface complexation. Usefulness of the GAE in molecular simulation of interfaces is outlined. Special attention is paid to the seminal contributions of Fainerman and Miller in applying molecular-thermodynamic interfacial-layer models toward predicting adsorption behavior at fluid/fluid interfaces. Conversion of adsorption isotherms into two-dimensional interfacial-tension equations of state via the GAE is highlighted. Confusion over interpretation of the Gibbs adsorption equation arises primarily because of imprecise meaning for adsorbed amounts. Once invariant adsorptions are confirmed and utilized, the Gibbs adsorption equation yields identical results for Gibbs zero-volume surface thermodynamics and for Guggenheim finite-volume surface thermodynamics.

Dividing surface↗

Adsorption Kinetics of CO2, CH4, and their Equimolar Mixture on Coal from the Black Warrior Basin, West-Central Alabama

Laboratory experiments were conducted to investigate the adsorption kinetic behavior of pure and mixed gases (CO2, CH4, approximately equimolar CO2 + CH4 mixtures, and He) on a coal sample obtained from the Black Warrior Basin at the Littleton Mine (Twin Pine Coal Company), Jefferson County, west-central Alabama. The sample was from the Mary Lee coal zone of the Pottsville Formation (Lower Pennsylvanian). Experiments with three size fractions (45-150 m, 1-2 mm, and 5-10 mm) of crushed coal were performed at 40 C and 35 C over a pressure range of 1.4 6.9 MPa to simulate coalbed methane reservoir conditions in the Black Warrior Basin and provide data relevant for enhanced coalbed methane recovery operations. The following key observations were made: (1) CO2 adsorption on both dry and water-saturated coal is much more rapid than CH4 adsorption; (2) water saturation decreases the rates of CO2 and CH4 adsorption on coal surfaces, but it appears to have minimal effects on the final magnitude of CO2 or CH4 adsorption if the coal is not previously exposed to CO2; (3) retention of adsorbed CO2 on coal surfaces is significant even with extreme pressure cycling; and (4) adsorption is significantly faster for the 45-150 m size fraction compared to the two coarser fractions.

01 COAL, LIGNITE, AND PEAT↗

Bridging adsorption behavior of confined CH 4 -CO 2 binary mixtures across scales

An accurate understanding of the competitive adsorption of CH 4 -CO 2 binary mixtures in nano-confined systems is critical for engineering CO 2 storage in shale gas reservoirs. Due to difficulties in making reliable experimental observations in nano-scale, atomistic simulations (ASs), such as the Grand Canonical Monte Carlo (GCMC) method, provide a viable approach to studying the adsorption behavior of confined fluids. ASs are, however, limited in the size of the compositional domain due to the high computational cost. This work proposes a framework that combines AS and the lattice Boltzmann (LB) method to bridge the physics of confined fluids across scales. The Peng–Robinson equation of state (PR-EoS) produces fugacity coefficients, which serve as input for conducting multi-component GCMC simulations. These GCMC simulations explore the competitive adsorption behavior of CH 4 -CO 2 in nano-slits at various composition, pressure, and channel-width conditions. Both components generate adsorption layers with high densities near the walls with CO 2 preferentially adsorbing compared to CH 4 on the organic walls of carbon sheets. At the mesoscale, a pseudopotential model represents the intermolecular forces in multi-component, multiple-relaxation-time LB simulations. The LB simulations are in good agreement with the GCMC results, allowing us to obtain values for tunable LB parameters. We then extend the use of LB to simulate adsorption behavior in complex networks with nano-sized channels. The phase behavior and fluid properties in the complex geometries of nano-channels differ from nano-slits and bulk systems. Furthermore, the bridging of physics from GCMC (microscale) to LB (mesoscale) via the macroscale PR-EoS connects the adsorption behavior of binary systems across scales.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CRYOGENIC ADSORPTION OF HYDROGEN ISOTOPES OVER NANO-STRUCTURED MATERIALS

Porous materials such as zeolites, activated carbon, silica gels, alumina and a number of industrial catalysts are compared and ranked for hydrogen and deuterium adsorption at liquid nitrogen temperature. All samples show higher D{sub 2} adsorption than that of H{sub 2}, in which a HY sample has the greatest isotopic effect while 13X has the highest hydrogen uptake capacity. Material's moisture content has significant impact to its hydrogen uptake. A material without adequate drying could result in complete loss of its adsorption capacity. Even though some materials present higher H{sub 2} adsorption capacity at full pressure, their adsorption at low vapor pressure may not be as good as others. Adsorption capacity in a dynamic system is much less than in a static system. A sharp desorption is also expected in case of temperature upset.

08 HYDROGEN↗

On the reactive adsorption of ammonia on activated carbons modified by impregnation with inorganic compounds

Ammonia adsorption was studied under dynamic conditions, at room temperature, on activated carbons of different origins (coal-based, wood-based and coconut-shell-based carbons) before and after their impregnation with various inorganic compounds including metal chlorides, metal oxides and polycations. The role of humidity was evaluated by running tests in both dry and moist conditions. Adsorbents were analyzed before and after exposure to ammonia by thermal analyses, sorption of nitrogen, potentiometric titration, X-ray diffraction and FTIR spectroscopy. Results of breakthrough tests show significant differences in terms of adsorption capacity depending on the parent carbon, the impregnates and the experimental conditions. It is found that surface chemistry governs ammonia adsorption on the impregnated carbons. More precisely, it was demonstrated that a proper combination of the surface pH, the strength, type and amount of functional groups present on the adsorbents' surface is a key point in ammonia uptake. Water can have either positive or negative effects on the performance of adsorbents. It can enhance NH{sub 3} adsorption capacity since it favors ammonia dissolution and thus enables reaction between ammonium ions and carboxylic groups from the carbons' surface. On the other hand, water can also reduce the performance from the strength of adsorption standpoint. It promotes dissolution of ammonia and that ammonia is first removed from the system when the adsorbent bed is purged with air. Ammonia, besides adsorption by van der Waals forces and dissolution in water, is also retained on the surface via reactive mechanisms such as acid-base reactions (Bronsted and Lewis) or complexation. Depending on the materials used and the experimental conditions, 6-47% ammonia adsorbed is strongly retained on the surface even when the bed is purged with air.

01 COAL, LIGNITE, AND PEAT↗

Heterocyclic tri-urea isocyanurate bridged groups modified periodic mesoporous organosilica synthesized for Fe(III) adsorption

To achieve a high level of heavy metal adsorption, 1,1 Prime ,1 Double-Prime -(1,3,5-triazine-2,4,6-triyl)tris(3-(3-(triethoxysilyl)propyl)urea) (TTPU) was synthesized as a novel melamine precursor and incorporated on the silica surface of periodic mesoporous organosilica (PMO). The melamine modified PMOs (MPMOs) were synthesized under acidic conditions using TTPU, tetraethylorthosilicate (TEOS) and Pluronic P123 as a template and the modified PMOs were characterized using the relevant instrumental techniques. The characteristic materials were used as adsorbents for the adsorption of Fe(III) ions. Fe(III) adsorption studies revealed MPMO-7.5 to be a good absorbent with higher adsorption efficiency than other MPMOs. - Graphical Abstract: A new organosilica precursor, TTPU, has been successfully synthesized and characterized to incorporate on the silica surface of periodic mesoporous organosilica (PMO). The melamine modified PMOs (MPMOs), in particular, the MPMO-7.5 was found to exhibit good adsorption efficiency for Fe(III). Highlights: Black-Right-Pointing-Pointer Synthesis of new melamine modified periodic mesoporous organosilicas (MPMOs). Black-Right-Pointing-Pointer A new organosilica precursor, TTPU, has been successfully synthesized for the MPMOs. Black-Right-Pointing-Pointer The MPMOs were characterized by the relevant instrumental techniques. Black-Right-Pointing-Pointer MPMO-7.5 exhibits higher adsorption efficiency for Fe(III) ions than other MPMOs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly efficient and selective adsorption of In{sup 3+} on pristine Zn/Al layered double hydroxide (Zn/Al-LDH) from aqueous solutions

A pristine Zn/Al-layered double hydroxide (Zn/Al-LDH) showed excellent adsorption ability and selectivity towards In{sup 3+} ions from aqueous solutions. The adsorption behaviour as a function of the contact time, solution pH, ionic strength, and amount of adsorbent under ambient conditions revealed a strong dependency on the pH and ionic strength over In{sup 3+} intake. The structure and properties of Zn/Al-LDH and In{sup 3+} adsorbed Zn/Al-LDH (In–Zn/Al-LDH) were examined carefully by X-ray diffraction, Fourier transform infrared spectroscopy, N{sub 2}-sorption/desorption, UV–vis spectroscopy, and X-ray photoelectron spectroscopy. The adsorbent had a sufficient number of active sites that were responsible for the In{sup 3+} adsorption and quite stable even after the adsorption process. The selective adsorption of In{sup 3+} on Zn/Al-LDH was also observed even from a mixture containing competing ions, such as Mn{sup 2+}, Co{sup 2+}, Ni{sup 2+}, Cd{sup 2+}, Pb{sup 2+}, and Cu{sup 2+}. The adsorption experiments showed that Zn/Al-LDH is a promising material for the pre-concentration and selective removal of In{sup 3+} from large volumes of aqueous solutions. - Highlights: • A pristine Zn/Al-layered double hydroxide showed good selectivity for In{sup 3+} ions. • The material exhibited a maximum In{sup 3+} intake of 205 mg g{sup −1} at pH 6. • The materials showed good affinity of In{sup 3+} over Cu{sup 2+} and Pb{sup 2+} from ion mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic adsorbent constructed from the loading of amino functionalized Fe{sub 3}O{sub 4} on coordination complex modified polyoxometalates nanoparticle and its tetracycline adsorption removal property study

A magnetic polyoxometalates based adsorbent has been synthesized successfully through the loading of amino functionalized Fe{sub 3}O{sub 4} (NH{sub 2}-Fe{sub 3}O{sub 4}) on nanoparticle of a coordination complex modified polyoxometalates (CC/POMNP). FTIR illustrate there exist intense hydrogen bonds between NH{sub 2}-Fe{sub 3}O{sub 4} and CC/POMNP, which keep the stability of this adsorbent. At room temperature, this adsorbent exhibits ferromagnetic character with saturation magnetization of 8.19 emu g{sup −1}, which provides prerequisite for fast magnetic separation. Water treatment experiment illustrates this POM based magnetic adsorbent exhibits high adsorption capacity on tetracycline. The adsorption process can be described well with Temkin model, which illustrates the interaction between adsorbent and tetracycline plays the dominated role in tetracycline removal. The rapid, high efficient tetracycline adsorption ability suggests this POM based magnetic adsorbent exhibits promising prospect in medical and agriculture waste water purification. A magnetic polyoxometalates based adsorbent, which exhibits excellent tetracycline adsorption removal property has been synthesized through the loading of NH{sub 2}-Fe{sub 3}O{sub 4} on coordination complex modified polyoxometalates - Graphical abstract: A magnetic polyoxometalates based adsorbent, which exhibits excellent tetracycline adsorption removal property has been synthesized through the loading of NH{sub 2}-Fe{sub 3}O{sub 4} on coordination complex modified polyoxometalate. Display Omitted - Highlights: • A POM based magnetic adsorbent was fabricated through the loading of NH{sub 2}-Fe{sub 3}O{sub 4} on POM nanoparticle. • This adsorbent possesses excellent tetracycline adsorption property. • Saturation magnetization value of this adsorbent is 8.19 emug−1, which is enough for magnetic separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The role of adsorption in decomposition of dyes on TiO{sub 2} and N-modified TiO{sub 2} photocatalysts under UV and visible light irradiations

Graphical abstract: Influence of pH and zeta potential of TiO{sub 2} based photocatalysts on the adsorption and degradation of MB under UV irradiation. Highlights: ► Adsorption of dyes on TiO{sub 2}/N accelerated their decomposition under visible light. ► pH of solution and the PZC of the TiO{sub 2} surface influence the adsorption of dyes. ► Under UV irradiation oxidation of pollutants with OH radicals is the most powerful. -- Abstract: Photoactivities of TiO{sub 2} based photocatalysts towards dyes decomposition was studied by consider their adsorption abilities. It was proved that zeta potential and PZC (point zero charge) of photocatalyst surface as well as pH of solution strongly influenced adsorption of tested dyes, Methylene Blue (MB) and Reactive Red 198 (RR198). These dyes underwent the photocatalytic decomposition by two ways, OH radicals attack and direct oxidation with photogenerated holes. The latter one is more efficient in case of better contact of pollutant with the photocatalysts surface and is dominant under visible light irradiation, where insignificant amount of OH radicals is formed. The former one is powerful under UV irradiation and is a key factor in decomposition of dyes regardless of their adsorption abilities.

36 MATERIALS SCIENCE↗

Investigation into the role of silica in lithium polysulfide adsorption for lithium sulfur battery

Highlights: • Amine functionalized silica nanoparticles (AFSN) were prepared. • Polysulfide adsorption studies were carried out with silica nanoparticles and AFSN. • Sulfur cathodes were prepared with SN and AFSN for Li–S batteries. • AFSN showed excellent polysulfide adsorption. - Abstract: A new type of sulfur electrodes with the ability for polysulfide adsorption was prepared by incorporating silica nanoparticles (SN) or amine functionalized silica nanoparticles (AFSN). AFSN was synthesized by a simple and cost-effective method. The functionalization and surface morphology of silica were confirmed with Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM), respectively. Polysulfide adsorption studies were carried out using UV–vis spectrometer, which confirmed the excellent adsorption of polysulfides by AFSN. Interaction of polysulfides with SN or AFSN was studied using FTIR and FT-Raman spectroscopy. The effective polysulfide adsorption by SN and AFSN leads to good and stable cycle performance of lithium sulfur cells. The results show that the incorporation of SN or AFSN with sulfur is a promising method to prepare cathode material for lithium sulfur batteries.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Controlled synthesis of silkworm cocoon-like α-Fe2O3 and its adsorptive properties for organic dyes and Cr(VI)

Highlights: • A hierarchical structured α-Fe{sub 2}O{sub 3} is synthesized by using a simple hydrothermal method. • The as-synthesized α-Fe{sub 2}O{sub 3} shows high adsorption capacities for CR, MO and Cr(VI) ions. The removal efficiency can reach up to 99.2%, 83.9% and 100% under the given conditions. • This kind of material realizes synergistic adsorption of organic and inorganic pollutants. And the adsorption efficiency can reach 94.7% for CR and 97.9% for Cr(VI) ions in a mixed solution. - Abstract: Industrial wastewater containing both organic and inorganic pollutants is being generated all the time. Efficient materials are highly needed to purify the polluted water. Thus, a hierarchical structured α-Fe{sub 2}O{sub 3} with excellent adsorptive property has been synthesized by using a facile hydrothermal method. It can be prepared in macroscopic quantity. The as-synthesized α-Fe{sub 2}O{sub 3} with silkworm cocoon-like morphology shows high efficiency in adsorbing Congo red (CR), Methyl orange (MO) and Cr(VI). The removal efficiency of CR, MO and Cr(VI) can reach 99.2%, 83.9% and 100% under appropriate conditions. Besides, this α-Fe{sub 2}O{sub 3} shows high adsorptive ability for mixed CR and Cr(VI) in aqueous solution and the final removal rates can reach 94.7% and 97.9%, respectively. The adsorption kinetics fits well with the pseudo-second-order kinetic model. The results indicate that the product may find potential application in purification of wastewater containing both organic and inorganic pollutants.

36 MATERIALS SCIENCE↗

Adsorption of thiophene on transition metal surfaces with the inclusion of van der Waals effects

Here, we use density functional theory with the inclusion of the van der Waals interaction to study the adsorption of thiophene, C 4 H 4 S, on Pt, Rh, Pd, Au, and Ag (100) surfaces. The five van der Waals (vdW) inclusive functionals we employ are optB86b-vdW, optB88-vdW, optPBE-vdW, revPBE-vdW, and rPW86-vdW2. For comparison we also run calculations with the GGA- Perdew Burke and Ernzerhof (PBE) functional. We examine several adsorption sites with the plane of the molecule parallel or perpendicular to the surface. The most stable configuration on all metals was the site where the center of the thiophene lies over a 4-fold hollow site with the sulfur atom lying close to a top site. Furthermore, we examine several electronic and geometric properties of the adsorbate including charge transfer, modification of the d-band, adsorption energy, tilt angle, and adsorption height. For the coinage metals PBE gives the lowest adsorption energy. For reactive transition metal substrates, revPBE-vdW and rPW86-vdW2 give lower adsorption energies than PBE.

36 MATERIALS SCIENCE↗

Manipulating Pore Topology and Functionality to Promote Fluorocarbon-Based Adsorption Cooling

With the worldwide demand for refrigeration and cooling expected to triple, it is increasingly important to search for alternative energy resources to drive the refrigeration cycles with reduced electricity consumption. Recently, adsorption cooling has gained increased attention since energy reallocation in such systems is based on gas adsorption/desorption, which can be driven by waste/natural heat sources. Eco-friendly sorption-based cooling relies on the cyclic transfer of refrigerant gas from a high to low energy state by the pseudo-compression effect resulting from adsorption and desorption. The driving force for energy transfer relies on heat rather than electricity. The performance of a sorption chiller is primarily influenced by this cyclic sorption behavior, which is characterized as the working capacity of the porous sorbent. Thus increases in this working capacity directly translate to a more compact and efficient cooling system. How-ever, a lack of highly effective sorbent/refrigerant pairs lowers cooling performance, and therefore has limited applicability. To this end, synthetic metal-organic frameworks (MOFs) and covalent organic polymers (COPs) possess higher porosity and greater tunability leading to more substantial potential benefits for adsorption, compared to traditional sorbent materials. Similarly, hydrofluorocarbon refrigerants have more favorable applicability given ease of operation above atmospheric pressures due to suitable saturated vapor pressures and boiling points. For these reasons, our work focuses on an ongoing strategy to promote sorption cooling via improvements in the sorbent/refrigerant pair. Specifically, we target the interaction of hydrofluorocarbon refrigerants with MOF/COP materials at a molecular level by interpreting the host-guest chemistry and the role of framework pore topology. These molecular level differences translate to cooling performance, which is described herein. These strategies include engineering framework porosity (i.e., pore size, pore volume) by using elongated organic linkers and stereochemistry control during synthesis; manipulating the sorb-ate/sorbent interaction by introducing functional moieties or unsaturated metal centers to enhance working capacities in narrow pressure ranges; varying pore topology/morphology to impact adsorption isotherm behavior; and leveraging defective sites within the frameworks to further enhance adsorption capability. Here this atomic level understanding of sorb-ate-sorbent interactions is conducted using various in situ experimental techniques such as synchrotron-based X-ray diffraction, X-ray absorption spectroscopy, in situ Fourier transform infrared spectroscopy, and direct sorption energies determinization with calorimetry. Moreover, the experimentally studied interactions and the corresponding adsorption mechanism are corroborated by computational studies using density functional theory (DFT) and grand canonical Monte Carlo (GCMC) simulations. Using this approach, we envision the capability to engineer designed frameworks with precise molecular control to target refrigerant molecules and thereby enhance the performance of desired working pairs for sorption-based cooling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carboxylic Group Rotation and Lattice Expansion in a Co 2 (Pyrazine-2,3-Dicarboxylate) 2 (4,4'-Bipyridine) Porous Coordination Polymer Induced by CO 2 Adsorption at Ambient Temperature

Here, a Co 2 (pzdc) 2 (bpy)(H 2 O) m (pzdc: pyrazine-2,3dicarboxylate; bpy: 4,4'-bipyridine) porous coordination polymer (PCP) was studied for CO 2 uptake and concomitant structural changes at ambient temperature. Extended structural characterization included evaluation of lattice parameter changes upon CO 2 adsorption and in situ synchrotron X-ray powder diffraction data. The PCP effective pore size increased by ~2% with gas uptake over the pressure range of 1-50 atm, allowing the adsorption capacity to double. Furthermore, the hysteretic behaviors seen during CO 2 adsorption at moderate pressures are commensurate with the structural changes from synchrotron data. The adsorption and hysteresis occur with rotation of the linking carboxylate groups, and yet only minor changes in unit cell volume (ΔV ≈ 6 Å 3 ) are observed. This contrasts the findings for [Cu 2 (pzdc) 2 (bpy)] n , where a combination of pillar bpy rotations and significant lattice expansion (ΔV ≈ 68 Å(3)) takes place upon hysteretic adsorption of CO 2 . In situ high-temperature X-ray diffraction revealed that the Co(II)-based material has good thermal stability up to ca. 200° C. Finally, the CO 2 uptake also appears to be at a physisorption level, with adsorbent-adsorbate interactions that are ca. 30% stronger than what has been reported for CO 2 adsorption onto [Cu 2 (pzdc) 2 (bpy)] n .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗