Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADSORBENTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Side effects of antimotion sickness drugs

The effects on operational proficiency of the antimotion sickness drugs scopolamine, promethazine and d-amphetamine are tested using a computerized pursuit meter. Proficiency is not significantly affected by oral doses of 0.25 mg or 0.50 mg scopolamine but is descreased by oral or I.M. doses of 25 mg promethazine. The performance decrement associated with 25 mg oral promethazine is prevented when combined with 10 mg oral d-amphetamine. The combination of 25 mg I.M. promethazine, 25 mg oral promethazine and 10 mg d-amphetamine produces less performance decrement than oral or I.M. doses of promethazine alone, though more performance decrement than a placebo. I.M. promethazine is adsorbed slowly and consequently may provoke drowsiness.

Wood, C. D.↗
NASA NTRS1984

Sulfur dioxide on Io - Spatial distribution and physical state

Observations of the 4-micron SO2 band on Jupiter's satellite Io and laboratory measurements of SO2 frost are presented. The observations confirm the existence of a large longitudinal variation in band strength, but show no evidence of temporal changes. Comparison of the band position and shape in Io's spectrum with those in the laboratory frost's suggests that the bulk of the absorption on Io is due to frost, not adsorbed gas. The derived SO2 coverage is large enough to require that SO2 be present in most terrain types on Io and not just in the white plains unit. To reconcile the infrared observations that indicate large amoutns of SO2 with the ultraviolet observations of Voyager and IUE that show little, the SO2 must be mixed intimately with the sulfur (or other material) so that at each wavelength the darker component dominates the spectrum.

Fanale, F. P.↗
NASA NTRS1984

The effect of surface contamination on thermocapillary flow in a two-dimensional slot

In an analysis of the effect of insoluble surfactants on the steady capillary flow in a shallow slot, the problem is formulated as a two-dimensional channel heated differentially from the side, with a free surface on which an insoluble surface species is adsorbed. The vertical boundaries are considered to be isothermal and impenetrable and the lower horizontal boundary to be insulated and impenetrable. Lubrication theory and matched asymptotic expansions are used to reduce the problem to a single nonlinear integral-algebraic equation. For small elasticity E, the surface velocity is nearly constant, with the result that, for small Pe, the surface concentration is nearly uniform while, for large Pe, it develops a boundary layer near the stagnation point at the cold wall, resulting in high local surface concentrations. Condensed surfactant layers will form only with E much less than one and Pe much greater than one.

Homsy, G. M.↗
NASA NTRS1984

Observation of surface states on gold films by electron tunneling spectroscopy

It is pointed out that inelastic electron tunneling spectroscopy (IETS) is a useful technique for the study of vibrational modes of molecules adsorbed on the surface of the insulating layer in a metal-insulator-metal tunnel junction. A detailed study of electron tunneling in aluminum-aluminum oxide-gold (Al-Al2O3-Au) tunnel junctions has been conducted with an overall goal of exploring possible mechanisms in such a thin film device useful for chemical sensing. For an understanding of the electronic effects in the presence of chemicals in a junction, the electronic surface properties of the metallic films in a clean tunnel junction must be established. The present investigation is concerned with room temperature observations of electronic states on the surface of highly oriented gold film in Al-Al2O3-Au junctions.

Lambe, J.↗
NASA NTRS1984

The nature of the metal-CO interaction and bonding

The adsorption of CO on metal surfaces is represented by molecular orbital cluster models of CO at an on top site and adsorbed normal to the surface carbon end down. Ab initio SCF and MCSCF calculations are performed for several clusters. The new constrained space orbital variation CSOV approach is used to analyze the bonding and to compare CO adsorption on Al, representative of sp metals, with that on Cu, representative of transition metals. There is a large repulsion between the superposed free CO and metal charge distributions which is considerably smaller for Cu than for Al because there are fewer valence sigma electrons for Cu than for Al. The CSOV analysis shows that the metal to CO pi donation is much more important than the CO to metal sigma donation. It is also shown that for Cu, the d pi contribution to the metal pi donation is larger than the valence 4p pi contribution. The d pi donation is compared between Fe, Ni, and Cu and this donation and the metal-CO interaction are found to be different in the order Fe greater than Ni greater than Cu.

Bagus, P. S.↗
NASA NTRS1986

Adsorption of H2, Ne, and N2 on Activated Charcoal

9-page report presents measured adsorption isotherms of hydrogen, neon, and nitrogen on activated charcoal for temperatures from 77 to 400 K and pressures from 1 to 80 atmospheres (0.1 to 8.1 MPa). Heats of adsorption calculated from isotherms also presented. Report gives expressions, based on ideal-gas law, which show relationship between different definitions of volume of gas adsorbed and used in describing low-pressure isotherms.

Chang, C. K.↗
NASA NTRS1985

Humidity effects on adhesion of nickel-zinc ferrite in elastic contact with magnetic tape and itself

The effects of humidity on the adhesion of Ni-Zn ferrite and magnetic tape in elastic contact with a Ni-Zn ferrite hemispherical pin in moist nitrogen were studied. Adhesion was independent of normal load in dry, humid, and saturated nitrogen. Ferrites adhere to ferrites in a saturated atmosphere primarily from the surface tension effects of a thin film of water adsorbed on the ferrite surfaces. The surface tension of the water film calculated from the adhesion results was 48 times 0.00001 to 56 times 0.00001 N/cm; the accepted value for water is 72.7 x 0.00001 N/cm. The adhesion of ferrite-ferrite contacts increased gradually with increases in relative humidity to 80 percent, but rose rapidly above 80 percent. The adhesion at saturation was 30 times or more greater than that below 80 percent relative humidity. Although the adhesion of magnetic tape - ferrite contacts remained low below 40 percent relative humidity and the effect of humidity was small, the adhesion increased considerably with increasing relative humidity above 40 percent. The changes in adhesion of elastic contacts were reversible on humidifying and dehumidifying.

Miyoshi, K.↗
NASA NTRS1985

Surface sulfur measurements on stratospheric particles

The surface chemistries of three particulate samples collected from the lower stratosphere have been determined using a Scanning Auger Microprobe (SAM). These samples are typical of the most abundant natural and anthropogenic particles observed within the stratosphere in the greater-than-2-micron diameter size fraction. Succsessive sputtering and analysis below the first few adsorbed monolayers of all particles shows the presence of a thin (less than 150A) sulfur layer. These sulfur regions probably formed by surface reaction of sulfur-rich aerosols with each particle within the stratosphere. Settling rate calculations show that a typical sphere (10-micron diameter) may reside within the aerosol layer for 20 days and thus provide a qualitative guide to surface sulfur reaction rates.

Mackinnon, I. D. R.↗
NASA NTRS1985

XPS studies of water and oxygen on iron-sputtered natural ilmenite

The adsorption of D2O and O2 on polycrystalline FeTiO3 (natural ilmenite) has been studied by X-ray photoelectron spectroscopy. Oxygen was found to absorb reactively with Fe(0) on Ar(+)-sputtered surfaces at and above 150 K while D2O was found to adsorb molecularly or in ice layers below 170 K on both Ar(+) and O2(+) ion-bombarded ilmenite. The D2O desorbs at 170 K with either the formation of an OD complex or a strongly bound molecular layer of water.

Schulze, P. D.↗
NASA NTRS1984

Kinetics of a gas adsorption compressor

Chan (1981) has suggested that a process based on gas adsorption could be used as a means to drive a Joule-Thomson (J-T) device. The resulting system has several advantages. It is heat powered, it has no sealing, there are no mechanical moving parts, and no active control is required. In the present investigation, a two-phase model is used to analyze the transients of a gas adsorption compressor. The modeling of the adsorption process is based on a consideration of complete thermal and mechanical equilibrium between the gaseous phase and the adsorbed gas phase. The experimental arrangement for two sets of kinetic tests is discussed, and data regarding the experimental results are presented in graphs. For a theoretical study, a two-phase model was developed to predict the transient behavior of the compressor. A computer code was written to solve the governing equations with the aid of a standard forward marching predictor-corrector method.

Chan, C. K.↗
NASA NTRS1985

pH profile of the adsorption of nucleotides onto montmorillonite. I - Selected homoionic clays

The effect of pH and adsorbed ions on the adsorption of purine and pyrimidine nucleotides on montmorillonite clay was studied experimentally. The specific nucleotides examined were: 5 prime-AMP; 3-prime AMP; and 5 prime-CMP. The pH of the clay samples was adjusted to various levels in the 2-12 pH range using microliter volumes of concentrated acid (1N HCl) and base (1NHNaOH). It was found that preferential adsorption among nulceotides was dependent on the pH level and on the characteristics of the substituted metal cation and anion exchange mechanisms. Below pH 4, adsorption was attributed to cation and anion exchange mechanisms. Above pH 4, however, adsorption was attributed to the complexation mechanisms occurring between the metal cations in the clay exchange site and in the biomolecule. The possible role of homoionic clays in the concentration mechanisms of biomonomers in the prebiotic environment is discussed.

Lawless, J. G.↗
NASA NTRS1985

The changes in small metal cluster size with adsorption Be13Xn, X = H, O, S, Cl and F

The Be-Be and Be-adsorbate distances are optimized for small Be13Xn clusters,s assuming only two independent degrees of freedom. Results for chemisorption into the three-fold hollows are quite similar to those found for small metal clusters on supports. It is predicted that Cl and F will have the same effect on the metal-metal bond lengths, and so will O and S.

Bauschlicher, C. W., Jr.↗
NASA NTRS1985

Template-directed polynucleotide synthesis on mineral surfaces

Ferric hydroxide, a plausible prebiotic material, strongly adsorbs polynucleotides. It is shown that adsorption on ferric hydroxide and on several other minerals has no effect, under the conditions studied, on the template-directed oligomerization of guanylic acid on polycytidylic acid.

Schwartz, A. W.↗
NASA NTRS1985

p(2 x 2) and c(2 x 2) coverages of Cl and F on Ni(100), a comparison with O and S on Ni(100)

The rigid lattice adsorbate vibrational frequency normal to the surface, omega(e,r) and height above the surface, R(transverse), are computed for p(2 x 2) (0.25 ML) and c(2 x 2) (0.5 ML) coverages of Cl and F. These calculations show a small change in omega(e,r) and a small increase in R(transverse) with increased coverage. The bonding of Cl and F is compared to that found for O and S, both of which show a decrease in R(transverse) and O which shows a larger shift in omega(e,r).

Bauschlicher, C. W., Jr.↗
NASA NTRS1985

The seasonal cycle of water on Mars

A review of the behavior of water in the Mars atmosphere and subsurface is appropriate now that data from the Mariner and Viking spacecraft have been analyzed and discussed for several years following completion of those missions. Observations and analyses pertinent to the seasonal cycle of water vapor in the atmosphere of Mars are reviewed, with attention toward transport of water and the seasonal exchange of water between the atmosphere and various non-atmospheric reservoirs. Possible seasonally-accessible sources and sinks for water include water ice on or within the seasonal and residual polar caps; surface or subsurface ice in the high-latitude regions of the planet; adsorbed or chemically-bound water within the near-surface regolith; or surface or subsurface liquid water. The stability of water within each of these reservoirs is discussed, as are the mechanisms for driving exchange of the water with the atmosphere and the timescales for exchange. Specific conclusions are reached about the distribution of water and the viability of each mechanism as a seasonal reservoir. Discussion is also included of the behavior of water on longer timescales, driven by the variations in solar forcing due to the quasi-periodic variations of the orbital obliquity. Finally, specific suggestions are made for future observations from spacecraft which would further define or constrain the seasonal cycle of water.

Jakosky, B. M.↗
NASA NTRS1986

Solid-Sorbent Air Sampler

Portable unit takes eight 24-hour samples. Volatile organic compounds in air collected for analysis by portable, self-contained sampling apparatus. Sampled air drawn through sorbent material, commercial porous polymer of 2, 3-diphenyl-p-phenylene oxide. High-boiling-point organic compounds adsorbed onto polymer, while low-boiling-point organics pass through and returned to atmosphere. Sampler includes eight sample tubes filled with polymeric sorbent. Organic compounds in atmosphere absorbed when air pumped through sorbent. Designed for checking air in spacecraft, sampler adaptable to other applications as leak detection, gas-mixture analysis, and ambient-air monitoring.

Galen, T. J.↗
NASA NTRS1985

Experimental and Theoretical Studies of Wetting and Multilayer Adsorption

The recent work with partially miscible binary liquid mixtures has established that the structure of the liquid-vapor interface can undergo a first-order phase transition from incomplete to complete wetting of the vapor as the temperature is raised. A discontinuity in the change of interfacial tension as a function of temperature at the phase transition has been predicted to occur in many systems and to play an important role in the growth of uniform composites from alloy melts at monotectic points. These measurements are the first to establish the order of the transition. Studies of capillary rise in SF6 in a unique interferometer have led to the first measurements of the thickness of wetting layers (or equivalently, multilayer adsorbed films) on a solid surface near a liquid-vapor critical point. Instabilities in wetting layers were observed. A theory for the instabilities is being developed and will be checked by both static and dynamic optical experiments. The effect of gravity on the apparent thickness of interfaces (as measured by ellipsometry) is under study.

Moldover, M. R.↗
NASA NTRS1985

Improved heat switch for gas sorption compressor

Thermal conductivities of the charcoal bed and the copper matrix for the gas adsorption compressor were measured by the concentric-cylinder method. The presence of the copper matrix in the charcoal bed enhanced the bed conductance by at least an order of magnitude. Thermal capacities of the adsorbent cell and the heat leaks to two compressor designs were measured by the transient method. The new gas adsorption compressor had a heat switch that could transfer eight times more heat than the previous one. The cycle time for the new prototype compressor is also improved by a factor of eight to within the minute range.

Chan, C. K.↗