Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACTIVATION ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Temperature and temporal dependence of the optical response for a radiochromic dosimeter

Purpose: Both temporal and thermal dependencies of the dose response have been observed in radiochromic dosimeters. As these dependencies may be influenced by the dose level, the present study investigates the temperature dependence during irradiation and the temporal change of the optical response following irradiation of radiochromic dosimeters at a range of doses. Methods: Cuvette samples of the PRESAGE Trade-Mark-Sign radiochromic dosimeter were irradiated within a dose range of 0-10 Gy at irradiation temperatures within 5-35 Degree-Sign C and postirradiation storage within 6-30 Degree-Sign C. The optical response due to irradiation was measured using a standard spectrophotometer and the data were analyzed in terms of thermal and temporal change. Results: The initial dose response was linear over the applied dose range independent of irradiation temperature. However, the optical response to a specific dose increased exponentially with irradiation temperature corresponding to an activation energy of 0.114 {+-} 0.007 eV. The temporal change in dose response after irradiation consisted of an offset, an auto-oxidation rate with activation energy 0.84 {+-} 0.03 eV, and an initial exponential increase in optical response (1.6 {+-} 0.2 eV) followed by an exponential decrease in optical response (0.98 {+-} 0.08 eV). These contributions depended on both storage temperature and the dose given, leading to a nonlinear dose response with time at low storage temperatures and a high auto-oxidation rate at high storage temperatures. Conclusions: Thermal equilibration is important to the radiochromic dosimeter investigated due to an exponential change in dose response with irradiation temperature and a considerable postirradiation temporal change in response. For the dosimeter version investigated in this study, a compromise in storage temperature has to be made between increasing the nonlinearity of the dose response with time and inducing a high auto-oxidation rate.

36 MATERIALS SCIENCE↗

Impact of deposition conditions on the crystallization kinetics of amorphous GeTe films

The speed at which phase change memory devices can operate depends strongly on the crystallization kinetics of the amorphous phase. To better understand factors that affect the crystallization rate, we have investigated in this paper crystallization of GeTe films as a function of their deposition temperatures and deposition rates, using X-ray synchrotron radiation and Raman spectroscopy. As-deposited films were found to be fully amorphous under all conditions, even though films deposited at higher temperatures and lower rates experienced lower effective quench rates. Non-isothermal transformation curves show that the apparent crystallization temperature of GeTe films decreases with increasing deposition temperature and decreasing deposition rate. It was found that this correlates with a decrease in the activation energy for nucleation (calculated using Kissinger’s analysis), while the activation energy for crystal growth remained unaffected. Finally, from Raman spectroscopy measurements, it was found that increasing the deposition temperature or decreasing the deposition rate, and therefore the effective quench rate, reduces the number of homopolar Te–Te bonds and thereby reduces the barrier to crystal nucleation.

36 MATERIALS SCIENCE↗

Kinetics of the reaction of ferrous ions with hydroxyl radicals in the temperature range 25–300 °C

Here, the kinetics and mechanism of the reaction between OH radicals and ferrous ions in the temperature range 25–300 °C were studied using pulse radiolysis. At temperatures <150 °C the rate of reaction is essentially independent of temperature, while at temperatures >150 °C the activation energy is 45.8 ± 3.0 kJ mol —1 . The change in activation energy is attributed to a change in the dominant mechanism from hydrogen atom transfer (HAT) to dissociative ligand interchange. The kinetic isotope effect (KIE) was measured by repeating experiments in heavy water. A value of 2.9 was measured at room temperature where HAT is the dominant mechanism. The KIE decreases to zero at temperatures > 150 °C as ligand interchange becomes dominant and the O–H bond is no longer involved in the reaction.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Production of oxygen from lunar ilmenite

The kinetics and the mechanism of reduction of synthetic ilmenite by hydrogen in the temperature range of 807 to 1014 C were investigated. At temperatures below 876 C, the temporal profiles of conversion have a sigmoidal shape and indicate the presence of three different stages (induction, acceleration, and deceleration) during the reduction reaction. The apparent activation energy for the reaction is 22.3 kcal/mole, whereas the intrinsic activation energy is 16.9 kcal/mole. Scanning electron microscopy and energy dispersive x-ray analyses show that the diffusion of Fe product away from the reaction front and through the TiO2 phase, followed by the nucleation and growth of a separate Fe phase is an important step affecting the process kinetics. X-ray diffraction and wavelength dispersive x-ray results indicate that the TiO2 can be reduced to lower oxides of titanium at temperatures higher than 876 C.

Shadman, F.↗

Grain boundary sliding behaviour of copper and alpha brass at intermediate temperatures

The role of grain boundary sliding in copper and Cu-30 pct Zn in the temperature range 0.50-0.72 Tm, where Tm is the absolute melting point of the material, is examined. First, sliding data obtained on these materials are presented. The results indicate that the stress exponent for sliding is similar to that for lattice deformation, while the activation energy for sliding varies between 0.5 and 1.6 of the activation energy for creep. Several models proposed for grain boundary sliding are discussed, and it is shown that they do not account for the observed results on copper and alpha brass. A phenomenological model is proposed, where it is assumed that grain boundary sliding results from the glide of dislocations on secondary slip planes.

Raj, S. V.↗

Fast Proton Hopping Detection in Ice Ih by Quasi-Elastic Neutron Scattering

Quasi-elastic neutron scattering was employed on samples of HCl-doped polycrystalline ice I{sub h}. The analysis of the scattering signal provides the excess proton hopping time, {tau}{sub hop}, in the temperature range of 140-195 K. The hopping time strongly depends on the temperature of the sample, and the activation energy of a hopping step is 17 kJ/mol. The values of {tau}{sub hop} of the current experiment are in good agreement with calculated values derived from previous photochemical experiments,(1) in which we found that the proton hopping time at T > 242 K is on the order of 200 fs, roughly 10 times shorter than in liquid water at room temperature.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Characterization of defects in colloidal CdSe nanocrystals by the modified thermostimulated luminescence technique

The temperature dependencies of the luminescence spectra of 5-nm-diameter CdSe semiconductor nanocrystals synthesized by colloidal-chemistry methods are investigated. The two bands observed in these spectra around 2.01 and 1.37 eV correspond to band-to-band transitions and luminescence of defect states, respectively. A model explaining the temperature behavior of the luminescence band intensities both upon cooling and heating is put forward. A new modification of spectrally resolved thermostimulated luminescence technique making it possible to determine the activation energies and the character of traps responsible for the temperature dependence of the luminescence intensities is suggested. This technique is used to obtain the activation energies of the emission and capture of electrons at traps (190 and 205 meV, respectively) and to determine the depth of the electron level (57 meV) responsible for luminescence in the 1.37-eV region.

36 MATERIALS SCIENCE↗

The Diffusion Mechanism of Ge During Oxidation of Si/SiGe Nanofins

A recently discovered, enhanced Ge diffusion mechanism along the oxidizing interface of Si/SiGe nanostructures has enabled the formation of single-crystal Si nanowires and quantum dots embedded in a defect-free, single-crystal SiGe matrix. Here, we report oxidation studies of Si/SiGe nanofins aimed at gaining a better understanding of this novel diffusion mechanism. Here, a superlattice of alternating Si/Si 0.7 Ge 0.3 layers was grown and patterned into fins. After oxidation of the fins, the rate of Ge diffusion down the Si/SiO 2 interface was measured through the analysis of HAADF-STEM images. The activation energy for the diffusion of Ge down the sidewall was found to be 1.1 eV, which is less than one-quarter of the activation energy previously reported for Ge diffusion in bulk Si. Through a combination of experiments and DFT calculations, we propose that the redistribution of Ge occurs by diffusion along the Si/SiO 2 interface followed by a reintroduction into substitutional positions in the crystalline Si.

36 MATERIALS SCIENCE↗

Light-assisted recharging of graphene quantum dots in fluorographene matrix

In the present study, the charge transient spectroscopy was used to analyze the transient relaxation of charges in graphene and bilayer-graphene quantum dot (QD) systems formed by chemical functionalization of graphene and few-layer graphene layers. A set of activation energies (one to three different values) for the emission of charges from QDs sized 50 to 70 nm, most likely proceeding via the thermal activation of charge carriers from QD quantum confinement levels, were deduced from measurements performed in the dark. Daylight illumination of samples during measurements was found to result in a strong decrease of the activation energies and in an involvement of an athermal process in the charge relaxation phenomenon. The time of the light-assisted emission of charge carriers from QDs proved to be two to four orders of magnitude shorter than the time of their emission from QDs under no-illumination conditions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Role of H{sub 2}O in the thermal annealing of the E{sub {gamma}}{sup '} center in amorphous silicon dioxide

The model for the annealing of a radiation-induced point defect in silica, the E{sub {gamma}}{sup '} center, is identified in the temperature range (150-550) deg. C. Thermal treatments in controlled atmospheres of water vapor, oxygen, or helium of irradiated amorphous silicon dioxide are carried out. Direct experimental evidences that the annealing of the E{sub {gamma}}{sup '} center is caused by a reaction with diffusing water molecules are found. A rate equation system describing this annealing process is inferred, and its solutions are compared with experimental data to obtain quantitative information. In particular, the activation energy, its distribution and the way the latter is modified by thermal treatments are derived. The process was also established to be reaction limited. The mean activation energy value for the annealing process of the E{sub {gamma}}{sup '} center due to water is found to be 1.23 eV.

36 MATERIALS SCIENCE↗

Nonadiabatic Hydrogen Dissociation on Copper Nanoclusters

Copper surfaces display high catalytic selectivity but have poor hydrogen dissociation kinetics; therefore, we consider icosahedral Cu 13 nanoclusters to understand how nanoscale structure might improve catalytic prospects. We find that the spin state is a surprisingly important design consideration. Cu 13 clusters have large magnetic moments due to finite size and symmetry effects and exhibit magnetization-dependent catalytic behavior. The most favorable transition state for hydrogen dissociation has a lower activation energy than that on single-crystal copper surfaces but requires a magnetization switch from 5 to 3 μ B . Without this switch, the activation energy is higher than that on single-crystal surfaces. Weak spin–orbit coupling hinders this switch, decreasing the kinetic rate of hydrogen dissociation by a factor of 16. Here, we consider strategies to facilitate magnetization switches through optical excitations, substitution, charge states, and co-catalysts; these considerations demonstrate how control of magnetic properties could improve catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Band gap formation in graphene by in-situ doping

We report the formation of band gaps in as-grown stacks of epitaxial graphene with opposite doping. Control of in-situ doping during carbon source molecular beam epitaxy growth on SiC was achieved by using different carbon sources. Doping heterostructures were grown by stacking n-type material from a C{sub 60} source on p-type material from a graphite filament source. Activation energies for the resistivity and carrier concentration indicated band gaps up to 200 meV. A photoconductivity threshold was observed in the range of the electrical activation energies. Band gap formation is attributed to electric fields induced by spatially separated ionized dopants of opposite charge.

36 MATERIALS SCIENCE↗

Negative annealing in silicon after the implantation of high-energy sodium ions

The implantation of sodium ions with an energy of 300 keV is carried out into high-resistivity p-Si. The annealing of defects at T{sub ann} = 350–450°C and related activation of atoms (the latter occurs at the “tail” of atom distribution) are described by a first-order reaction. At T{sub ann} = 450–525°C and irrespective of the ion dose, negative annealing is observed; this annealing is accompanied by an appreciable increase in the surface resistance ρ{sub s}. According to estimations, the activation energy of this process amounts to ~2 eV. It is our opinion that the annealing is related to the precipitation of sodium donor atoms, which occurs at a depth exceeding by two–three times the projected range R{sub p} of ions. The annealing of defects at T{sub ann} = 525–700°C, which leads to a further decrease in ρ{sub s}, features an activation energy of ~2.1 eV. The hypothesis that the “tail” in the profiles of sodium atoms measured by secondary-ion mass spectroscopy is due to the diffusion of these atoms from the walls of the crater to its center is verified. It is shown that this process is not implemented since the profiles of sodium atoms measured at room temperature do not differ from those measured at–140°C.

36 MATERIALS SCIENCE↗

Study on Kinetic Mechanism of Bastnaesite Concentrates Decomposition Using Calcium Hydroxide

The thermal decomposition of bastnaesite concentrates using calcium hydroxide was studied. Calcium hydroxide can effectively inhibit the emission of fluorine during roasting by transforming it to calcium fluoride. The decomposition rate increased with increasing reaction temperature and amount of calcium hydroxide. The decomposition kinetics were investigated. The decomposition reaction was determined to be a heterogeneous gas–solid reaction, and it followed an unreacted shrinking core model. By means of the integrated rate equation method, the reaction was proven to be kinetically first order. Different reaction models were fit to the experimental data to determine the reaction control process. The chemical reaction at the phase interface controlled the reaction rate in the temperatures ranging from 673 K to 773 K (400 °C to 500 °C) with an apparent activation energy of 82.044 kJ·mol{sup −1}. From 773 K to 973 K (500 °C to 700 °C), diffusion through the solid product’s layer became the determining step, with a lower activation energy of 15.841 kJ·mol{sup −1}.

36 MATERIALS SCIENCE↗

Nonequilibrium behavior of the Pb wetting layer on Si(111)7×7

The growth and stability of the Pb8 x 8 wetting layer on Si(111)7 x 7, which provides a foundation for growing quantum-size-effect nanocrystals, was investigated by in situ x-ray scattering. Our experimental results reveal that the wetting-layer structure evolves temporally over a remarkably broad range of temperatures and that there are two distinct temperature regimes of nonequilibrium behavior. When grown at lower temperature (below 170 C), it was discovered that the wetting-layer structure changes with time, indicating that its disordered structure is not static; annealing in this regime improves the order of the wetting layer. Growth at higher temperature (170 C < T < 250 C), however, leads to a time-dependent degradation of the 8 x 8 structure due to the deterioration of the underlying Si(111)7 x 7. Thermal measurements determined an activation energy of 0.4 eV in the low-temperature regime, whereas in the high-temperature regime, a two-step process is observed, which has activation energies of approximately 1.3 and 1.9 eV. The results provide important considerations for understanding the anomalous kinetic behavior of quantum-size-effect Pb nanocrystals on Si(111)7 x 7, which is facilitated by the wetting layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Milling Parameters on the Dehydrogenation Properties of the Mg-Ti-H system

Magnesium-based alloys are promising candidates as potential hydrogen storage materials due to their inherent high hydrogen contents. Small particle size which can be achieved by milling, and small amounts of transition-metal compounds as catalysts result in increased hydrogen release/uptake kinetics. In this work, we examined the effects of various milling parameters and TiH2 content on the dehydrogenation properties of the Mg-Ti-H system. The samples were prepared with different amounts of TiH2 using various milling methods and conditions. The activation energy and the enthalpy change of dehydrogenation of the milled samples were determined by Thermogravimetric Analysis (TGA) and Differential Thermal Analyzer (DTA). The results indicated that the activation energy and enthalpy change of MgH2 dehydrogenation were significantly reduced when 9.1 mol % of TiH2 was added to it and the mixture was milled in a dual planet

08 HYDROGEN↗

Compositional Tuning of Ultrathin Surface Oxides on Metal and Alloy Substrates Using Photons: Dynamic Simulations and Experiments

Oxide synthesis with controlled functional properties is desirable for a plethora of applications but is elusive due to oxide growth kinetics. Here, we report on the ability to modify the structure and composition of ultra-thin oxides grown on Ni-Al alloy surfaces at room temperature utilizing photon illumination. Atomistic simulations that take into account dynamic charge transfer predict that the electric field produced across an oxide film in photon-assisted synthesis overcomes the activation energy barrier for ionic migration, leading to enhanced oxidation kinetics and oxygen incorporation into the oxide, enabling us to control the oxide composition at atomic length scales. Experiments (near-edge x-ray absorption fine structure (NEXAFS) and X-ray photoelectron spectroscopy) indicate that the native oxide on 5%Ni-Al alloy is primarily composed of aluminum oxide with no nickel oxide whereas the photon-assisted oxide comprises of both aluminum oxide and nickel oxide. The ability to tune the composition at the atomic scale of the ultra-thin oxide films leads to excellent passivity as verified from polarization experiments.

36 MATERIALS SCIENCE↗

Influence of Surface and Bulk Water Ice on the Reactivity of a Water-forming Reaction

On the surface of icy dust grains in the dense regions of the interstellar medium, a rich chemistry can take place. Due to the low temperature, reactions that proceed via a barrier can only take place through tunneling. The reaction H+H{sub 2}O{sub 2}⟶H{sub 2}O+OH is such a case with a gas-phase barrier of ∼26.5 kJ mol{sup −1}. Still, the reaction is known to be involved in water formation on interstellar grains. Here, we investigate the influence of a water ice surface and of bulk ice on the reaction rate constant. Rate constants are calculated using instanton theory down to 74 K. The ice is taken into account via multiscale modeling, describing the reactants and the direct surrounding at the quantum mechanical level with density functional theory (DFT), while the rest of the ice is modeled on the molecular mechanical level with a force field. We find that H{sub 2}O{sub 2} binding energies cannot be captured by a single value, but rather they depend on the number of hydrogen bonds with surface molecules. In highly amorphous surroundings, the binding site can block the routes of attack and impede the reaction. Furthermore, the activation energies do not correlate with the binding energies of the same sites. The unimolecular rate constants related to the Langmuir–Hinshelwood mechanism increase as the activation energy decreases. Thus, we provide a lower limit for the rate constant and argue that rate constants can have values up to two order of magnitude larger than this limit.

79 ASTRONOMY AND ASTROPHYSICS↗