SEARCH · Engineering Papers

Results for “variable flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Investigation of a panel code for airframe/propeller integration analyses

The Hess panel code was investigated as a procedure to predict the aerodynamic loading associated with propeller slipstream interference on the airframe. The slipstream was modeled as a variable onset flow to the lifting and nonlifting bodies treated by the code. Four sets of experimental data were used for comparisons with the code. The results indicate that the Hess code, in its present form, will give valid solutions for nonuniform onset flows which vary in direction only. The code presently gives incorrect solutions for flows with variations in velocity. Modifications to the code to correct this are discussed.

Miley, S. J.↗

NASA NTRS1983

Pressures measured in flight on the aft fuselage and external nozzle of a twin-jet fighter

Fuselage, boundary layer, and nozzle pressures were measured in flight for a twin jet fighter over a Mach number range from 0.60 to 2.00 at test altitudes of 6100, 10,700, and 13,700 meters for angles of attack ranging from 0 deg to 7 deg. Test data were analyzed to find the effects of the propulsion system geometry. The flight variables, and flow interference. The aft fuselage flow field was complex and showed the influence of the vertical tail, nacelle contour, and the wing. Changes in the boattail angle of either engine affected upper fuselage and lower fuselage pressure coefficients upstream of the nozzle. Boundary layer profiles at the forward and aft locations on the upper nacelles were relatively insensitive to Mach number and altitude. Boundary layer thickness decreased at both stations as angle of attack increased above 4 deg. Nozzle pressure coefficient was influenced by the vertical tail, horizontal tail boom, and nozzle interfairing; the last two tended to separate flow over the top of the nozzle from flow over the bottom of the nozzle. The left nozzle axial force coefficient was most affected by Mach number and left nozzle boattail angle. At Mach 0.90, the nozzle axial force coefficient was 0.0013.

Nugent, J.↗

NASA NTRS1983

Conservation laws of wave action and potential enstrophy for Rossby waves in a stratified atmosphere

The evolution of wave energy, enstrophy, and wave motion for atmospheric Rossby waves in a variable mean flow are discussed from a theoretical and pedagogic standpoint. In the absence of mean flow gradients, the wave energy density satisfies a local conservation law, with the appropriate flow velocity being the group velocity. In the presence of mean flow variations, wave energy is not conserved, but wave action is, provided the mean flow is independent of longitude. Wave enstrophy is conserved for arbitrary variations of the mean flow. Connections with Eliassen-Palm flux are also discussed.

Straus, D. M.↗

NASA NTRS1983

Conservation laws of wave action and potential enstrophy for Rossby waves in a stratified atmosphere

Straus, D. M.↗

NASA NTRS1988

The effects of finite rate chemical processes on high enthalpy nozzle performance - A comparison between SPARK and SEAGULL

The generalized chemistry version of the computer code SPARK is extended to include two higher-order numerical schemes, yielding fourth-order spatial accuracy for the inviscid terms. The new and old formulations are used to study the influences of finite rate chemical processes on nozzle performance. A determination is made of the computationally optimum reaction scheme for use in high-enthalpy nozzles. Finite rate calculations are compared with the frozen and equilibrium limits to assess the validity of each formulation. In addition, the finite rate SPARK results are compared with the constant ratio of specific heats (gamma) SEAGULL code, to determine its accuracy in variable gamma flow situations. Finally, the higher-order SPARK code is used to calculate nozzle flows having species stratification. Flame quenching occurs at low nozzle pressures, while for high pressures, significant burning continues in the nozzle.

Carpenter, M. H.↗

NASA NTRS1988

Three-dimensional flow past two cylinders mounted side by side on an endwall

This paper reports on the experimental description of flow past two cylinders that stand side by side on an endwall. Flow visualization performed in a water tunnel provides a qualitative understanding of the three-dimensional flow over a range of control variables. Limiting streamline flow visualization shows the location of the three-dimensional separation for a range of cylinder spacings. For a spacing of 1.5 diameters between centers, the flow is described using a five-hole probe and by cylinder and endwall surface static pressure measurements. At a cylinder diameter Reynolds number of 250,000 the measurements show a single primary vortex with a wide flat cross section. The velocity measurements show high shear on the endwall in the primary vortex region. A small counterrotating vortex is found between the primary vortex and the cylinder leading edge.

Boyle, M. T.↗

NASA NTRS1988

Unique, clean-air, continuous-flow, high-stagnation-temperature facility for supersonic combustion research

Accurate, spatially-resolved measurements can be conducted of a model supersonic combustor in a clean air/continuous flow supersonic combustion facility whose long run times will allow not only the point-by-point mapping of flow field variables with laser diagnostics but facilitate the simulation of steady-state combustor conditions. The facility will provide a Mach 2 freestream with static pressures in the 1 to 1/6 atm range, and stagnation temperatures of up to 2000 K.

Krauss, R. H.↗

NASA NTRS1987

Kinetics of mineral condensation in the solar nebula

A natural extension of the type of gas-mineral-melt condensation experiments is to study the gas-mineral-melt reaction process by controlling the reaction times of appropriate gas compositions with silicate materials. In a condensing and vaporizing gas-solid system, important processes that could influence the composition of and speciation in the gas phase are the kinetics of vaporization of components from silicate crystals and melts. The high vacuum attainable in the space station would provide an environment for studying these processes at gas pressures much lower than those obtainable in experimental devices operated at terrestrial conditions in which the gas phase and mineral or melt would be allowed to come to exchange equilibrium. Further experiments would be performed at variable gas flow rates to simulate disequilibrium vapor fractionation. In this type of experiment it is desirable to analyze directly the species in the gas phase in equilibrium with the condensed silicate material. This analytical method would provide a direct determination of the species present in the gas phase. Currently, the notion of gas speciation is based on calculations from thermodynamic data. The proposed experiments require similar furnace designs and use similar experimental starting compositions, pressures, and temperatures as those described by Mysen.

Grove, T. L.↗

NASA NTRS1990

Design of a device to remove lunar dust from space suits for the proposed lunar base

The National Aeronautics and Space Administration plans to begin construction of a lunar base soon after the turn of the century. During the Apollo missions, lunar dust proved to be a problem because the dust adhered to all exposed material surfaces. Since lunar dust will be a problem during the establishment and operation of this base, the need exists for a device to remove the dust from space suits before the astronauts enter clean environments. The physical properties of lunar dust were characterized and energy methods for removing the dust were identified. Eight alternate designs were developed to remove the dust. The final design uses a brush and gas jet to remove the dust. The brush bristles are made from Kevlar fibers and the gas jet uses pressurized carbon dioxide from a portable tank. A throttling valve allows variable gas flow. Also, the tank is insulated with Kapton and electrically heated to prevent condensation of the carbon dioxide when the tank is exposed to the cold (- 240 F) lunar night.

Harrington, David↗

NASA NTRS1991

Compressible convection in a viscous Venusian mantle

Finite element simulations of axisymmetric spherical shell compressible convection were carried out to investigate the effect of various surface boundary conditions in a Venusian mantle, employing a thermal expansivity alpha which decreased with depth, a uniform viscosity an order of magnitude greater than the earth's, and zero and chondric quantities of internal heating. As long as hot plumes from the core-mantle boundary were strong, the convection pattern was typical of that for variable alpha flow; that is, it was characterized by steady upflowing regions, unsteady collections of downflowing plumes, and large aspect ratio cells. Increases in the internal heating or the temperature T0 at the top of the convecting layer weakened the hot plumes and, therefore, decreased the width of the cells. A rigid surface increased the internal temperature and also decreased the width of convection cells. Extensive regions of subadiabaticity were found in the mantle. These results are compared with those for fully three-dimensional convection under similar conditions (Schubert et al., 1990).

Leitch, A. M.↗

NASA NTRS1992

Hybrid model for solidification and convection

A hybrid model for continuum phase-change problems is presented. The hybrid model accounts for flow in regions of concentrated mush, dilute mush, and single-phase liquid. Scale analysis shows that, in dilute mush, the Blake-Kozeny-Carman relation may lead to inaccuracy in the continuum formulation for certain values of the Rayleigh and Darcy numbers. The hybrid model uses arctangent switching functions to switch on the Darcy flow and variable viscosity terms depending on the local value of the fraction solid. Two-dimensional example calculations suggest that the hybrid model more accurately accounts for transport in the dilute mush region.

Oldenburg, Curtis M.↗

NASA NTRS1957

Effect of bluntness on transition for a cone and a hollow cylinder at Mach 3.1

Bluntness was more effective in displacing transition downstream on a cylinder than on a cone. The downstream displacement of transition is related to the formation of a shock layer within which the Reynolds and Mach numbers are reduced and to pressure gradients that exist over the forward part of the model. Round bluntness in general had a favorable effect, whereas sharp-cornered flat bluntness above a certain size had unfavorable effects on the location of the transition point.

BODIES - SHAPE VARIABLES↗

NASA NTRS1953

Analysis of heat transfer and fluid friction for fully developed turbulent flow of supercritical water with variable fluid properties in a smooth tube

Explore the source record for details and available documents.

Deissler, Robert G↗

NASA NTRS1993

A detailed model for simulation of catchment scale subsurface hydrologic processes

A catchment scale numerical model is developed based on the three-dimensional transient Richards equation describing fluid flow in variably saturated porous media. The model is designed to take advantage of digital elevation data bases and of information extracted from these data bases by topographic analysis. The practical application of the model is demonstrated in simulations of a small subcatchment of the Konza Prairie reserve near Manhattan, Kansas. In a preliminary investigation of computational issues related to model resolution, we obtain satisfactory numerical results using large aspect ratios, suggesting that horizontal grid dimensions may not be unreasonably constrained by the typically much smaller vertical length scale of a catchment and by vertical discretization requirements. Additional tests are needed to examine the effects of numerical constraints and parameter heterogeneity in determining acceptable grid aspect ratios. In other simulations we attempt to match the observed streamflow response of the catchment, and we point out the small contribution of the streamflow component to the overall water balance of the catchment.

Paniconi, Claudio↗

NASA NTRS1993

A decade's overview of Io's volcanic activity

Over the past decade some aspects of Io's volcanic activity have changed greatly, while others have essentially remained constant. This contrast has emerged from our study of multi-wavelength, infrared, observations of Io's thermal emission. From 1983 to 1992 we observed the disk integrated flux density of Io from the NASA Infrared Telescope Facility (IRTF) on Mauna Kea, Hawaii. Our spectral coverage allows us to separate out the emission components due to volcanic thermal anomalies which are warmer than the background emission caused by solar heating. Our temporal coverage allows us to resolve individual eruptions and also to obtain the disk-integrated flux density as a function of longitude (or, equivalently, orbital phase angle). Characteristics that persisted over the decade involve Loki's location and intensity of emission, the leading hemisphere emission, and the average heat flow. The variable aspects of Io over the decade include Loki's hotter area(s) and the outbursts in the leading hemisphere.

Matson, D. L.↗

NASA NTRS1994

The NASA Langley 8-foot Transonic Pressure Tunnel calibration

The NASA Langley 8-Foot Transonic Pressure Tunnel is a continuous-flow, variable-pressure wind tunnel with control capability to independently vary Mach number, stagnation pressure, stagnation temperature, and humidity. The top and bottom walls of the test section are axially slotted to permit continuous variation of the test section Mach number from 0.2 to 1.2, the slot-width contour provides a gradient-free test section 50 in. long for Mach numbers equal to or greater than 1.0 and 100 in. long for Mach numbers less than 1.0. The stagnation pressure may be varied from 0.25 to 2.0 atm. The tunnel test section has been recalibrated to determine the relationship between the free-stream Mach number and the test chamber reference Mach number. The hardware was the same as that of an earlier calibration in 1972 but the pressure measurement instrumentation available for the recalibration was about an order of magnitude more precise. The principal result of the recalibration was a slightly different schedule of reentry flap settings for Mach numbers from 0.80 to 1.05 than that determined during the 1972 calibration. Detailed tunnel contraction geometry, test section geometry, and limited test section wall boundary layer data are presented.

Brooks, Cuyler W., Jr.↗

NASA NTRS1996

Low-Temperature Rate Coefficients of C2H with CH4 and CD4 from 154 to 359 K

Rate coefficients for the reaction C2H + CH4 yields C2H2 + CH3 and C2H + CD4 yields C2HD + CD3 are measured over the temperature range 154-359 K using transient infrared laser absorption spectroscopy. Ethynyl radicals are produced by pulsed laser photolysis of C2H2 in a variable temperature flow cell, and a tunable color center laser probes the transient removal of C2H (Chi(exp 2) Sigma(+) (0,0,0)) in absorption. The rate coefficients for the reactions of C2H with CH4 and CD4 both show a positive temperature dependence over the range 154-359 K, which can be expressed as k(sub CH4) = (1.2 +/- 0.1) x 10(exp -11) exp((-491 +/- 12)/T) and k(sub CD4) = (8.7 +/- 1.8) x 10(exp -12) exp((-650 +/- 61)/T) cm(exp 3) molecule(exp -1) s(exp -1), respectively. The reaction of C2H + CH4 exhibits a significant kinetic isotope effect at 300 K of k(sub CH4)/k(sub CD4) = 2.5 +/- 0.2. Temperature dependent rate constants for C2H + C2H2 were also remeasured over an increased temperature range from 143 to 359 K and found to show a slight negative temperature dependence, which can be expressed as k(sub C2H2) = 8.6 x 10(exp -16) T(exp 1.8) exp((474 +/- 90)/T) cm(exp 3) molecule(exp -1) s(exp -1).

Opansky, Brian J.↗

NASA NTRS2000

Three-Dimensional Nacelle Aeroacoustics Code With Application to Impedance Education

A three-dimensional nacelle acoustics code that accounts for uniform mean flow and variable surface impedance liners is developed. The code is linked to a commercial version of the NASA-developed General Purpose Solver (for solution of linear systems of equations) in order to obtain the capability to study high frequency waves that may require millions of grid points for resolution. Detailed, single-processor statistics for the performance of the solver in rigid and soft-wall ducts are presented. Over the range of frequencies of current interest in nacelle liner research, noise attenuation levels predicted from the code were in excellent agreement with those predicted from mode theory. The equation solver is memory efficient, requiring only a small fraction of the memory available on modern computers. As an application, the code is combined with an optimization algorithm and used to reduce the impedance spectrum of a ceramic liner. The primary problem with using the code to perform optimization studies at frequencies above I1kHz is the excessive CPU time (a major portion of which is matrix assembly). The research recommends that research be directed toward development of a rapid sparse assembler and exploitation of the multiprocessor capability of the solver to further reduce CPU time.

Watson, Willie R.↗