Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “uncertainty”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Evaluation of the Uncertainty in JP-7 Kinetics Models Applied to Scramjets

One of the challenges of designing and flying a scramjet-powered vehicle is the difficulty of preflight testing. Ground tests at realistic flight conditions introduce several sources of uncertainty to the flow that must be addressed. For example, the scales of the available facilities limit the size of vehicles that can be tested and so performance metrics for larger flight vehicles must be extrapolated from ground tests at smaller scales. To create the correct flow enthalpy for higher Mach number flows, most tunnels use a heater that introduces vitiates into the flow. At these conditions, the effects of the vitiates on the combustion process is of particular interest to the engine designer, where the ground test results must be extrapolated to flight conditions. In this paper, the uncertainty of the cracked JP-7 chemical kinetics used in the modeling of a hydrocarbon-fueled scramjet was investigated. The factors that were identified as contributing to uncertainty in the combustion process were the level of flow vitiation, the uncertainty of the kinetic model coefficients and the variation of flow properties between ground testing and flight. The method employed was to run simulations of small, unit problems and identify which variables were the principal sources of uncertainty for the mixture temperature. Then using this resulting subset of all the variables, the effects of the uncertainty caused by the chemical kinetics on a representative scramjet flow-path for both vitiated (ground) and nonvitiated (flight) flows were investigated. The simulations showed that only a few of the kinetic rate equations contribute to the uncertainty in the unit problem results, and when applied to the representative scramjet flowpath, the resulting temperature variability was on the order of 100 K. Both the vitiated and clean air results showed very similar levels of uncertainty, and the difference between the mean properties were generally within the range of uncertainty predicted.

Norris, A. T.↗

Aircraft System Noise Prediction Uncertainty Quantification for a Hybrid Wing Body Subsonic Transport Concept

Aircraft system level noise prediction for advanced, unconventional concepts has undergone significant improvement over the past two decades. The prediction modeling uncertainty must be quantified so that potential benefits of unconventional configurations, which are outside of the range of empirical models, can be reliably assessed. This paper builds on previous work in an effort to improve estimates of element prediction uncertainties where the prediction methodology has been improved, or new experimental validation data are available, to provide an estimate of the system level uncertainty in the prediction process. In general, the uncertainty of the prediction will be strongly dependent on the aircraft configuration as well as which technologies are integrated. While the quantitative uncertainty values contained here are specific to the hybrid wing body design presented, the underlying process is the same regardless of configuration. A refined process for determining the uncertainty for each element of the noise prediction is detailed in this paper. The system level uncertainty in the prediction of the aircraft noise is determined at the three certification points, using a Monte Carlo method. Comparisons with previous work show a reduction of 1 EPNdB in the 95%coverage interval of the cumulative noise level. The largest impediment for continued reduction in uncertainty for the hybrid wing body concept is the need for improved modeling and validation experiments for fan noise, propulsion airframe aeroacoustic effects, and the Krueger flap, which comprise the bulk of the uncertainty in the cumulative certification noise level.

June, Jason C.↗

Trim Flight Conditions for a Low-Boom Aircraft Design Under Uncertainty

The purpose of this paper is to investigate the noise generation of a low-boom aircraft design in flight trim conditions under uncertainty. The deflection of control surfaces to maintain a trimmed flight state has the potential to change the perceived loudness at the ground. Furthermore, the uncertainties associated with the control surface deflections can complicate the overall uncertainty quantification. Incorporation of the uncertainties in the prediction of perceived sound levels during the design phase can lead to improved robustness. In this paper, a brief review of low-boom flight trim research is presented. Realistic flight trim conditions requiring control surface deflection are integrated into the current research efforts for uncertainty quantification and vehicle design. In addition, a generalized set of procedures for the characterization of uncertainties in flight trim conditions are introduced. In a case study of the application of these procedures, a 5 decibel average difference in the perceived level of loudness was found between clean (no deflections) and trimmed configurations. Also, uncertainties attributable to control surface deflection were found to account for, on average, over 50% of the total near field uncertainty. Uncertainty discretization methods implemented were able to give more insight into the overall global variances.

Phillips, Ben D↗

Uncertainty in Observational Estimates of the Aerosol Direct Radiative Effect and Forcing

Aerosols continue to be responsible for the largest uncertainty in determining the anthropogenic radiative forcing of the climate. To both reconcile the large range in satellite-based estimates of the aerosol direct radiative effect (DRE, the direct interaction with solar radiation by all aerosols) and to optimize the design of future observing systems, we build a framework for assessing uncertainty in aerosol DRE and the aerosol direct radiative forcing (DRF, the radiative effect of just anthropogenic aerosols, RF_ari). Shortwave aerosol radiative kernels (Jacobians) were derived using the MERRA-2 reanalysis data. These radiative kernels are used to compute a lower-bound on the systematic uncertainty in observational estimates of the aerosol DRE/DRF by making the optimistic assumption that global aerosol observations can be made with the accuracy found in the Aerosol Robotic Network (AERONET) sun photometer retrievals. The total uncertainty is shown to be dominated by contributions from the aerosol single scattering albedo uncertainty. These uncertainty estimates were compared to a literature survey of mostly satellite-based aerosol DRE/DRF values. Comparisons to previous studies reveal that most have significantly underestimated the aerosol DRE uncertainty. Past estimates of the aerosol DRF uncertainty are smaller (on average) than our optimistic observational estimates, including the aerosol DRF uncertainty given in the Intergovernmental Panel on Climate Change (IPCC) fifth assessment report (AR5).

Tyler James Thorsen↗

Uncertainty in Observational Estimates of the Aerosol Direct Radiative Effect and Forcing

Aerosols continue to be responsible for the largest uncertainty in determining the anthropogenic radiative forcing of the climate. To both reconcile the large range in satellite-based estimates of the aerosol direct radiative effect (DRE, the direct interaction with solar radiation by all aerosols) and to optimize the design of future observing systems, we build a framework for assessing uncertainty in aerosol DRE and the aerosol direct radiative forcing (DRF, the radiative effect of just anthropogenic aerosols, RF_ari). Shortwave aerosol radiative kernels (Jacobians) were derived using the MERRA-2 reanalysis data. These radiative kernels are used to compute a lower-bound on the systematic uncertainty in observational estimates of the aerosol DRE/DRF by making the optimistic assumption that global aerosol observations can be made with the accuracy found in the Aerosol Robotic Network (AERONET) sun photometer retrievals. The total uncertainty is shown to be dominated by contributions from the aerosol single scattering albedo uncertainty. These uncertainty estimates were compared to a literature survey of mostly satellite-based aerosol DRE/DRF values. Comparisons to previous studies reveal that most have significantly underestimated the aerosol DRE uncertainty. Past estimates of the aerosol DRF uncertainty are smaller (on average) than our optimistic observational estimates, including the aerosol DRF uncertainty given in the Intergovernmental Panel on Climate Change (IPCC) fifth assessment report (AR5).

Tyler James Thorsen↗

The IAEA Coordinated Research Program on HTGR Reactor Physics, Thermal-hydraulics and Depletion Uncertainty Analysis: Description of the Benchmark Test Cases and Phases

The continued development of High Temperature Gas Cooled Reactors (HTGRs) requires verification of design and safety features with reliable high fidelity physics models and robust, efficient, and accurate codes. The uncertainties in the HTR analysis tools are today typically assessed with sensitivity analysis and then a few important input uncertainties (typically based on a PIRT process) are varied in the analysis to find a spread in the parameter of importance. However, one wish to apply a more fundamental approach to determine the predictive capability and accuracies of coupled neutronics/thermal-hydraulics and depletion simulations used for reactor design and safety assessment. Today there is a broader acceptance of the use of uncertainty analysis even in safety studies and it has been accepted by regulators in some cases to replace the traditional conservative analysis. Finally, there is also a renewed focus in supplying reliable covariance data (nuclear data uncertainties) that can then be used in uncertainty methods. Uncertainty and sensitivity studies are therefore becoming an essential component of any significant effort in data and simulation improvement. In order to address uncertainty in analysis and methods in the HTGR community the IAEA launched a Coordinated Research Project (CRP) on the HTGR Uncertainty Analysis in Modelling early in 2012. The project is built on the experience of the OECD/NEA Light Water Reactor (LWR) Uncertainty Analysis in Best-Estimate Modelling (UAM) benchmark activity, but focuses specifically on the peculiarities of HTGR designs and its simulation requirements. Two benchmark problems were defined with the prismatic type design represented by the MHTGR-350 design from General Atomics (GA) while a 250 MW modular pebble bed design, similar to the INET (China) and indirect-cycle PBMR (South Africa) designs are also included. In the paper more detail on the benchmark cases, the different specific phases and tasks and the latest status and plans are presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development and application of a standardized flow measurement uncertainty analysis framework to various low-head short-converging intake types across the United States federal hydropower fleet

Turbine discharges at low-head short converging intakes are difficult to measure accurately. The proximity of the measurement section to the intake entrance admits large uncertainties related to asymmetry of the velocity profile, swirl, and turbulence. Existing turbine performance codes [10, 24] do not address this special case and published literature is largely silent on rigorous evaluation of uncertainties associated with this measurement context. The American Society of Mechanical Engineers (ASME) Committee investigated the use of Acoustic transit time (ATT), Acoustic scintillation (AS), and Current meter (CM) in a short converging intake at the Kootenay Canal Generating Station in 2009. Based on their findings, a standardized uncertainty analysis (UA) framework for velocity-area method (specifically for CM measurements) is presented in this paper given the fact that CM is still the most fundamental and common type of measurement system. Typical sources of systematic and random errors associated with CM measurements are investigated, and the major sources of uncertainties associated with turbulence and velocity fluctuations, numerical velocity integration technique (bi-cubic spline), and the number and placement of current meters are being considered for an evaluation. Since the velocity measurements in a short converging intake are associated with complex nonlinear and time varying uncertainties (e.g., Reynolds stress in fluid dynamics), simply applying the law of propagation of uncertainty is known to overestimate the measurement variance while the Monte Carlo method does not. Therefore, a pseudo-Monte Carlo simulation method (random flow generation technique [8]) which was initially developed for the purpose of establishing upstream or initial conditions in the Large-Eddy Simulation (LES) and the Direct Numerical Simulation (DNS) is used to statistically determine uncertainties associated with turbulence and velocity fluctuations. This technique is then combined with a bi-cubic spline interpolation method which converts point velocities into a continuous velocity distribution over the measurement domain. Subsequently the number and placement of current meters are simulated to investigate the accuracy of the estimated flow rates using the numerical velocity-area integration method outlined in ISO 3354 [12]. The authors herein consider that statistics on generated flow rates processed with bi-cubic interpolation and sensor simulations are the combined uncertainties which already accounted for the effects of all those three uncertainty sources. A preliminary analysis based on the current meter data obtained through an upgrade acceptance test of a single unit located in a mainstem plant has been presented.

Smith, Brennan T↗

UNCERTAINTY QUANTIFICATION OF CALCULATED FUEL TEMPERATURE FOR AGR-3/4 IRRADIATION EXPERIMENT

The third in a series of Advanced Gas Reactor (AGR) experiments conducted at the Idaho National Laboratory, AGR-3/4, was completed in April 2014, resulting in irradiation of the tristructural isotropic fuel for 369 effective full power days. A number of designed-to-fail fuel particles were embedded along the central line of each irradiated compact to provide a known source of fission products for subsequent transport through the compact matrix and structural graphite materials. The fuel temperature in each capsule during irradiation, a significant factor in the release and transport of fission products, was maintained within a predefined range representative of a high temperature gas reactor. Fuel temperatures were not measured directly because contact between a thermocouple and the fuel could lead to unwanted particle failures. An ABAQUS-based finite element heat transfer code, calibrated based on temperatures measured in the surrounding graphite rings, was used to predict fuel temperatures during irradiation. To quantify the uncertainty of calculated fuel temperatures, thermal model parameters with high sensitivity and/or large uncertainty were identified. Propagation of model parameter uncertainty and sensitivity is then used to quantify the overall uncertainty of calculated temperatures. Quantification of input uncertainties over the extended irradiation period of the AGR-3/4 experiment is a challenging task due to changes in capsule thermal properties and geometry caused by exposure to neutron irradiation at high temperatures. In the absence of direct measurements or complete knowledge about these changes, inputs to thermal model and associated uncertainties are estimated based on modeling assumptions and expert judgment. Unplanned events that occurred during irradiation contribute to input uncertainties as well. For example, shrinkage of fuel compact and graphite rings led to significant increase in the gap size uncertainties. This paper focuses on uncertainty quantification of calculated fuel temperature for AGR-3/4 capsule thermal models.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Uncertainties of responses calculated with a 'tuned' library - Geometrical and algebraic insights

The standard American evaluated nuclear data library ENDF/B-VII was 'tuned' based on simple measured critical assemblies. This tuning was not done according to a fully defined mathematical algorithm, such as the adjustment algorithm. In this work, we investigate how tuning affects the uncertainties (covariances) of the cross-section libraries. First, we analyze what happens to cross-section uncertainties as a result of adjustment. The effect of adjustment on the uncertainties is geometrically demonstrated for simple cases. For those parts of the sensitivities of the assembly to be calculated that are parallel to the sensitivities of the assemblies on which adjustment was based, there is significant reduction in the uncertainties. For orthogonal parts, there is no change in the uncertainties. These findings are algebraically proven based on the adjustment algorithm. Then we analyze the differences between tuned libraries and adjusted libraries. We conclude that for tuned libraries, the uncertainties in the direction of sensitivities on which adjustment or tuning were based are improved, similar to the improvement for an adjusted library. However, the displacement of the nominal values of the library parameters to their tuned value, instead of their adjusted value, adds an additional uncertainty. This additional uncertainty is typically small in the direction that was improved by adjustment. The magnitude of the additional uncertainty in perpendicular directions depends on the particular details of the tuning performed. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Uncertainty quantification of few group diffusion theory constants generated by the B1 theory-augmented Monte Carlo method

The purpose of this paper is to quantify uncertainties of fuel pin cell or fuel assembly (FA) homogenized few group diffusion theory constants generated from the B1 theory-augmented Monte Carlo (MC) method. A mathematical formulation of the first kind is presented to quantify uncertainties of the few group constants in terms of the two major sources of the MC method; statistical and nuclear cross section and nuclide number density input data uncertainties. The formulation is incorporated into the Seoul National Univ. MC code McCARD. It is then used to compute the uncertainties of the burnup-dependent homogenized two group constants of a low-enriched UO{sub 2} fuel pin cell and a PWR FA on the condition that nuclear cross section input data of U-235 and U-238 from JENDL 3.3 library and nuclide number densities from the solution to fuel depletion equations have uncertainties. The contribution of the MC input data uncertainties to the uncertainties of the two group constants of the two fuel systems is separated from that of the statistical uncertainties. The utilities of uncertainty quantifications are then discussed from the standpoints of safety analysis of existing power reactors, development of new fuel or reactor system design, and improvement of covariance files of the evaluated nuclear data libraries. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A surrogate-based uncertainty quantification with quantifiable errors

Surrogate models are often employed to reduce the computational cost required to complete uncertainty quantification, where one is interested in propagating input parameters uncertainties throughout a complex engineering model to estimate responses uncertainties. An improved surrogate construction approach is introduced here which places a premium on reducing the associated computational cost. Unlike existing methods where the surrogate is constructed first, then employed to propagate uncertainties, the new approach combines both sensitivity and uncertainty information to render further reduction in the computational cost. Mathematically, the reduction is described by a range finding algorithm that identifies a subspace in the parameters space, whereby parameters uncertainties orthogonal to the subspace contribute negligible amount to the propagated uncertainties. Moreover, the error resulting from the reduction can be upper-bounded. The new approach is demonstrated using a realistic nuclear assembly model and compared to existing methods in terms of computational cost and accuracy of uncertainties. Although we believe the algorithm is general, it will be applied here for linear-based surrogates and Gaussian parameters uncertainties. The generalization to nonlinear models will be detailed in a separate article. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

An Advanced ISOCS In Situ Gamma Spectrometry Services Tool to Reduce Uncertainties in Waste Characterization Projects - 16311

Canberra's In Situ Object Counting System (ISOCS) is an established tool used for gamma spectrometry allowing a physical representation of complex geometries and mathematical calculation of the calibration function. It avoids the need for radioisotope standards which can be costly and prohibitively difficult to produce. Uncertainties in the sample - detector geometry lead to uncertainties in the calibrations. Canberra's ISOCS Uncertainty Estimator (IUE) tool offers an automated means of accommodating known model geometry uncertainties, with calculation of robust defensible calibration uncertainties. However these uncertainties may be large leading to potential over-estimation of under-estimation of activity. This can be equated directly to waste disposal costs if one is using ISOCS for waste sentencing to classify wastes as (for example) Transuranic Waste (TRU) or Low Level Waste (LLW). An Advanced ISOCS in-situ Gamma Spectrometry (AIGS) services tool has been developed to reduce the uncertainties. This system is based on generating and comparing geometry models that yield Figures of Merit (FoM) indicative of improved consistency between modelled data and available diverse measurement data. This paper describes the development and features of AIGS, focusing on recent testing with radioisotope sources in a 200 litre drum filled with a simulated waste matrix. The results demonstrate a significant advantage for Am-241 where uncertainties can otherwise amount to a factor of 2 or more. We show how our specialist teams can develop procedures for deployment of standard ISOCS hardware, adapting measurement geometries and procedures through careful planning, to provide data that can be used to greatly reduce the uncertainties in the measured activities. Lastly, we comment on the range of potential applications for this new technique and the wider benefits for the decommissioning industry. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Radionuclide Risk Coefficient Uncertainty Distributions for Use in Performance Assessments - 19156

Traditionally, radiation dose has been used as the regulatory criterion for decision making in performance assessments (PAs), despite the concept of cancer risk arguably being a more easily understood endpoint than dose for the public, and a preferable metric for decision analysis. However, the United States Environmental Protection Agency (EPA) has developed risk parameters for use in risk assessments and PAs in the form of radionuclide-specific risk coefficients, or RCs, which are published in various Federal Guidance Reports (FGRs). RCs are employed as scalars to convert environmental radionuclide exposure (via ingestion, inhalation, and external exposure) estimates to incremental lifetime cancer risk (ILCR). ILCR is the additional cancer risk averaged over a lifetime, over-and-above all-cause cancer risk, associated with carcinogen exposure. Uncertainties associated with RCs are discussed in FGR 13 and in a joint report published by EPA and Oak Ridge National Laboratory, but statistical distributions for the RCs were not directly developed. The uncertainty assessments in the EPA/ONRL report were based on dosimetric modeling and elicitation of nine experts. From these sources, five uncertainty categories were defined based on ratios of the 5. and 95. quantiles of uncertainty. Thus, the representations of uncertainty defined by EPA/ORNL are not distributions in a traditional sense. Furthermore, the authors only addressed uncertainty in RCs for inhalation and ingestion pathways. We develop a methodology for assigning statistical distributions to EPA's published mortality RC values (i.e. to estimate the probability of dying from radiation-induced cancers) for the inhalation (slow, medium, and fast absorption types), ingestion (water, food, and soil), and external exposure pathways associated with all cancer types. We employed the same dosimetric concepts and assumptions as EPA/ORNL, including cancer risk (dose-response) distributional information from a previous expert elicitation, which was also employed by EPA/ORNL in their work. We assumed that uncertainty in RCs can be described by lognormal distributions based on the modeling conducted previously by EPA/ORNL, and that point estimates tabulated in FGR 13 represent median values of the distributions. We also extended EPA/ORNL's uncertainty ratios to statistical distributions for external exposure RCs. The results are a set of radionuclide-specific distributions that are applicable in PAs that focus on cancer mortality. These distributions are currently and will subsequently be employed in PAs at various sites, in addition to the required regulatory dose limits. Quantification of ILCRs and associated uncertainty in PAs will provide regulators and the public with additional information for good decision making. Future directions include further refinement of the distributions and development of statistical distributions for morbidity RCs, which are used to estimate the probability of developing, but not necessarily dying as a result of, radiation-induced cancer. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Uncertainty Quantification of Activation Due to Cross Section Data in Neutron Shielding Calculation

Quantification of activation in structure materials around the nuclear reactor through calculation is necessary before start of decommissioning. Then a neutron shielding calculation is carried out to estimate activation of structural materials. Neutron shielding calculation is performed out for spatially large regions around a reactor through deep penetration calculation, calculation result would have significant uncertainty. In order to minimize total amount of structure materials treated as radioactive waste, quantitative estimation on uncertainty of structural activation and its reduction is important. The uncertainties due to calculation arises from that of input data and that of calculation method. Examples of uncertainty of input data is those for nuclear reaction cross section and atom density of the nuclide in the structure. In this study, we focus on the uncertainty of cross section, which would be one of the dominant uncertainties, and try to estimate uncertainty of activation due to cross section data in a neutron shielding calculation. The random sampling method (RS) is used as the uncertainty quantification method. With the RS method, uncertainty estimation can be carried out without modification of computer codes for a neutron shielding calculation. (authors)

36 MATERIALS SCIENCE↗

Best-Estimate-Plus-Uncertainty-Informed Deterministic Safety Evaluation

Nuclear power plant (NPP) utilities operate contingent on receiving a favorable safety assessment from their national regulatory and safety authority. Among the many facets of NPP safety addressed is verification of integral design-basis performance - a demonstration of a plant's response to a suite of challenging transient and accident scenarios. Thermal-hydraulic system computer codes like RELAP5, TRAC, CATHARE, and ATHLET are used as the simulation engine as part of a broader evaluation model that accounts for a variety of uncertainties. It is common for these evaluation models to apply either a super-bounding/ deterministic or best-estimate plus uncertainty (BEPU) approach. The trend over the past two decades has been away from the classical deterministic methods towards methods explicitly incorporating parametric uncertainty models. These methods center upon the evaluation of parametric and system response uncertainties, where these uncertainties are derived from the convolution of one or more parametric uncertainty models. Acceptance of BEPU methods has provided the nuclear industry benefits regarding operational flexibility and, in some cases, power output. The advantage of BEPU for new NPPs is less obvious. Generally, these new designs include engineered safety features that practically eliminate fuel damage resulting from design-basis events. To substantiate such claims, applying super-bounding assumptions on uncertainties may be a more expedient demonstration of a plant's safety case than those based on BEPU. In addition, the requirements on design inputs for a deterministic evaluation model are substantially less than that for a BEPU evaluation model. As such, applying a deterministic evaluation model is expected to have the advantage of reducing the duration of the licensing review process. For the current operating fleet of light-water reactors (LWRs), the nuclear safety authorities in most countries have followed the U.S. Nuclear Regulatory Commission's rules for the preparation of safety analysis. These rules are specified in the U.S. Code of Federal Regulations, most notably in, Part 10, Section 50.46, entitled 'acceptance criteria for emergency core cooling systems for light-water nuclear power reactors' and its Appendix K. Notably, Appendix K specifies deterministic requirements for analysis of the loss-of-coolant accident (LOCA), which is generally regarded as the maximum credible accident for LWRs. Projecting 10 CFR 50, Appendix K, to new plants is not obviously applicable as it addresses light water fluid flow and heat transfer phenomena associated with core uncovery. Preventing core uncovery is a requirement for several designs in the class of small modular reactors (SMR). In doing so, the majority of phenomenological uncertainties prescribed in Appendix K are eliminated. Similarly, the impact of other phenomena to effect a change in various safety measures, i.e., figures-of-merit, is expected to be different. The implication is that development of a deterministic evaluation model must be derived with an original technical basis rather than solely rely on Appendix K. While a logical conclusion, the expectation of original bases, regardless of the treatment of uncertainties, is embodied in the U.S. NRC's Regulatory Guide (RG) 1.203, Transient and Accident Analysis. Within the evaluation model development and application process framework of RG 1.203, this paper describes a BEPU-informed deterministic evaluation model for NPPs with large inherent safety margins. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Sensitivities and correlations of critical experiments due to uncertainties of system parameters and nuclear data - 14416

With increasing demand on accuracy of criticality calculations, correlations between benchmark experiments due to system parameter uncertainties become of interest in bias determination. The impact of different interpretations of system parameter uncertainties on the calculation of covariances and correlations of k{sub eff} is discussed in this article. Following the suggestion of the OECD/NEA EGUACSA Benchmark phase IV [1], 21 experiments from the ICSBEP international Handbook of Evaluated Criticality Safety Benchmarks [2] are used for this analysis (LEU-COMP-THERM series 07, exp. 01-04 and 39, exp. 01-17). The experiments share certain assembly and fuel features and were carried out in the same lab. Therefore, correlations in the calculation of k{sub eff} appear. Correlation coefficients between experiments due to nuclear data uncertainties are calculated with TSUNAMI [3] and show high values for most experiments. For the correlation analysis due to system parameter uncertainties mainly two scenarios are considered: In scenario A all uncertain parameters are varied mutually for all fuel rods, representing a systematic deviation of the actual experimental setup from the design value. This analysis is performed for all experiments listed above. In scenario E certain parameters like the outer cladding diameter are varied for each fuel rod individually, representing a random scattering of the varied parameter. Scenarios B, C and D represent intermediate scenarios between A and E, which are discussed shortly. Uncertainty and sensitivity calculations of k{sub eff} on the uncertain experimental parameters based on Monte Carlo sampling are presented and discussed. The calculations were performed with SUnCISTT (Sensitivities and Uncertainties in Criticality Inventory and Source Term Tool [4]) and SCALE 6.1.2 [3]. For the 21 EGUACSA proposed experiments the outer cladding diameter is the leading effect for the uncertainty of k{sub eff} for scenario A. In contrast, for scenario E the impact of the cladding diameter on k{sub eff} cancels out due to rod wise variations leaving the fuel diameter as the leading effect. The correlation analysis based on system parameter uncertainties indicates a significant dependence of the correlation coefficients on the interpretation of the uncertainties. It shows high values for scenario A, if the neutronic features are similar (EALF, H/U). For scenario E the overall correlations are significantly smaller and variations between experiments decrease. The impact of the determined correlations on bias calculations of application cases will be discussed by the authors in the accompanying paper 'Impact of correlated data in validation procedures'. (authors)

42 ENGINEERING↗

Calculating uncertainty on K-effective with MONK10 - 14583

Criticality safety assessments require a demonstration that a particular configuration of fissile material has an adequate sub-critical margin (k-effective sufficiently below unity) to ensure that the risk of criticality under normal operation and accident conditions is acceptable. The required sub-critical margin depends upon the uncertainty in the estimated value of k-effective. The uncertainty in the calculated value of k-effective arises from a number of sources, including: manufacturing tolerances on input data to the code (affecting geometry, compositions and densities), uncertainty in the nuclear data used by the code, stochastic uncertainty resulting from Monte Carlo simulation and modelling approximations/errors, including the inevitable bugs in the software. The ANSWERS Software Service, in collaboration with industrial partners, is developing a number of techniques to better understand and quantify uncertainty on predicted values of k-effective, using MONK. The SPRUCE utility code has been developed to allow uncertainty to be estimated using sampling methods. This can include the sampling of input parameters (including dimensions, compositions and densities) from statistical distributions. It can also include sampling different nuclear data libraries. A set of nuclear data libraries has been generated for this purpose by sampling from statistical distributions that represent the uncertainties in the published nuclear data evaluated files; a set of libraries has been produced for Latin Hypercube Sampling. By varying the input data and nuclear data, separate and combined uncertainties due to manufacturing tolerances and nuclear data can be derived. By performing least squares fitting on the results it is also possible to estimate the contribution of each of the uncertain inputs and a sensitivity method in MONK can break down the nuclear data uncertainty. (authors)

42 ENGINEERING↗

Uncertainty Estimate for the Outdoor Calibration of Solar Pyranometers: A Metrologist Perspective

Pyranometers are used outdoors to measure solar irradiance. By design, this type of radiometer can measure the; total hemispheric (global) or diffuse (sky) irradiance when the detector is unshaded or shaded from the sun disk, respectively. These measurements are used in a variety of applications including solar energy conversion, atmospheric studies, agriculture, and materials science. Proper calibration of pyranometers is essential to ensure measurement quality. This paper describes a step-by-step method for calculating and reporting the uncertainty of the calibration, using the guidelines of the ISO 'Guide to the Expression of Uncertainty in Measurement' or GUM, that is applied to the pyranometer; calibration procedures used at the National Renewable Energy Laboratory (NREL). The NREL technique; characterizes a responsivity function of a pyranometer as a function of the zenith angle, as well as reporting a single; calibration responsivity value for a zenith angle of 45 ..deg... The uncertainty analysis shows that a lower uncertainty can be achieved by using the response function of a pyranometer determined as a function of zenith angle, in lieu of just using; the average value at 45..deg... By presenting the contribution of each uncertainty source to the total uncertainty; users will be able to troubleshoot and improve their calibration process. The uncertainty analysis method can also be used to determine the uncertainty of different calibration techniques and applications, such as deriving the uncertainty of field measurements.

14 SOLAR ENERGY↗