Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transition path”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Trace Chemical Detection Using Intercalated MXenes as a Signal Enhancing Substrate in Optical Probes

MXenes are 2D materials composed of layered transition metal nitrides or carbides. These materials are synthesized by HF exfoliation from MAX phases (Ti{sub 3}AlC{sub 2}). The 2D nanomaterial was synthesized by the removal of the 'A' element, resulting in a Mxene product (Ti{sub 3}C{sub 2}). MXenes have the general formula M{sub n+1}X{sub n}T{sub x}, where M is an early transition metal, X is Carbon and/or Nitrogen, and T accounts for surface terminated functional groups such as Fluoride, hydroxyl, and oxygen. These materials have very unique properties, similar to graphene, that allows them to be applied in a variety of trace detection techniques including surface-enhanced Raman spectroscopy (SERS). MXenes have also been demonstrated to selectively uptake uranyl ion, UO{sub 2}{sup 2+}. If this property can be combined with SERS or fluorescence detection, it may be possible to use MXenes as the basis for an alternative method to kinetic phosphorescence analysis (KPA) for trace uranyl measurements. Objectives: To confirm that MXene Nano materials are suitable substrates for SERS and sensor development by enhancing Raman signaling. To determine if certain MXene preparation methods yield materials that are more suitable for trace sensing methods. To determine uranyl uptake properties of these MXene materials and test them for analytical signals. Sample Preparation: Preparation of Ti{sub 3}C{sub 2}MXene (at FSU). MXenes were prepared by etching Al from Ti{sub 3}AlC{sub 2} (MAX phase)material. Two etching techniques yield different MXene products: LiF/HCl: Milder reaction, larger MXene flakes. HF: Harsher reaction, smaller flakes, larger layer separation. Products washed to remove etchant, vacuum filtered, and dried. Dried MXene flakes are air-stable. Film preparation for sensor testing (at SRNL): Suspend powder in diH{sub 2}O, purge with Ar, sonicate for 30 min. Centrifuge and collect supernate with suspended particles. Observed LiF-etched Mxene yielded a higher density of particles and darker collected solution. Drop-cast (4 ml) supernate onto slides and dried with Ar. For Rhodamine B (RhB) testing, drop-cast 4 ml drops onto Mxene spots and dried with Ar. Scanning Electron Microscopy conditions: 10 kV Beam energy, high vacuum; Working distance of 8 mm; beam penetration depth appx. 4 microns, beam spot size appx. 2 nanometers. Results: Detection of aluminum correlates with bright spots on image. Presence of aluminum shows that LiF/HCl etching was less thorough than HF etching. Trace Cl detection in LiF images suggests incomplete rinsing. HF has smaller feature size, more layer structure, and increased homogeneity, consistent with expectations. Macroscopic Raman spectroscopy measurements: 532 nm excitation, ∼50 mW with a ∼100 micron spot size (InPhotonics RPB probe). Kaiser Optical Holospec f/1.8 spectrometer with cooled (-60 deg.C) Andor iDus OE420 CCD. LiF 1x supernate showed good signal for trace measurements of Rhodamine B. HF and 1/4x LiF supernates showed little Mxene or Rhodamine B signal. Low deposition densities led to excess background signal from glass slides. For LiF film, response is linear with Rhodamine B concentration over range tested. Will retest with Raman microscope (∼1 micron spot size) to characterize SERS of more dilute LiF and HF etched Mxenes. Conclusions: The LiF etched material was more suitable for macroscopic SERS measurements because it was more concentrated, resulting in a thicker film than the HF etched Mxene and diluted LiF sample. However, the other materials may give greater SERS enhancements, which we hope to determine from measurements with the Raman microscope. From characterization with SEM we concluded that the HF etched Mxene is more uniform/homogenous and has smaller particle size than the LiF etched Mxene. There is still aluminum present in both samples indicating that etching wasn't complete, but the removal of the aluminum was more efficient in the HF method. Path Forward: Observe SERS with Raman microscopy, to obtain better signals for the more diluted samples and be able to compare enhancement effects for the different MXenes. Characterize uranyl sorption into MXene films and test Raman and fluorescence signals. Revisit the etching conditions to improve removal of aluminum. FSU and SRNL will continue to collaborate to create and characterize different Mxene materials and test their usefulness for sensor applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Resolving Charge Distribution for Compositionally Heterogeneous Battery Cathode Materials

The isostructural nature of Li-layered cathodes allows for accommodating multiple transition metals (TMs). However, little is known about how the local TM stoichiometry influences the charging behavior of battery particles thus impacting battery performance. In this work, we develop heterogeneous compositional distributions in polycrystalline LiNi 1–x–y Mn x Co y O 2 (NMC) particles to investigate the interplay between local stoichiometry and charge distribution. These NMC particles exhibit a broad, continuous distribution of local Ni/Mn/Co stoichiometry, which does not compromise the global layeredness. The local Mn and Ni concentrations in individual NMC particles are positively and negatively correlated with the electrochemically induced Ni oxidation, respectively, whereas the Co concentration does not impose a clear effect on the Ni oxidation. The resulting material delivers excellent reversible capacity, rate capability, and cycle life at high operating voltages. Engineering Ni/Mn/Co distribution in NMC particles may provide a path toward controlling the charge distribution and thus chemomechanical properties of polycrystalline battery particles.

25 ENERGY STORAGE↗
DOE OSTI2025

Hund’s flat band in a frustrated spinel oxide

Electronic flat bands associated with quenched kinetic energy and heavy electron mass have attracted great interest for promoting strong electronic correlations and emergent phenomena such as high-temperature charge fractionalization and superconductivity. Intense experimental and theoretical research has been devoted to establishing the rich nontrivial metallic and heavy fermion phases intertwined with such localized electronic states. Here, in this study, we investigate the transition metal oxide spinel LiV 2 O 4 , an enigmatic heavy fermion compound lacking localized f orbital states. We use angle-resolved photoemission spectroscopy and dynamical mean-field theory to reveal a kind of correlation-induced flat band with suppressed interatomic electron hopping arising from intra-atomic Hund’s coupling. The appearance of heavy quasiparticles is ascribed to a proximate orbital-selective Mott state characterized by fluctuating local moments as evidenced by complementary magnetotransport measurements. The spectroscopic fingerprints of long-lived quasiparticles and their disappearance with increasing temperature further support the emergence of a high-temperature “bad” metal state observed in transport data. This work resolves a long-standing puzzle on the origin of heavy fermion behavior and unconventional transport in LiV 2 O 4 . Simultaneously, it opens a path to achieving flat bands through electronic interactions in d-orbital systems with geometrical frustration, potentially enabling the realization of exotic phases of matter such as the fractionalized Fermi liquids.

36 MATERIALS SCIENCE↗
DOE OSTI2020

X Fe 4 Ge 2 ( X = Y , Lu ) and Mn 3 Pt : Filling-enforced magnetic topological metals

Magnetism, coupled with nontrivial band topology, can bring about many interesting and exotic phenomena, so that magnetic topological materials have attracted persistent research interest. However, compared with nonmagnetic topological materials (TMs), the magnetic TMs are less studied, since their magnetic structures and topological phase transitions are usually complex and the first-principles predictions are usually sensitive on the effect of Coulomb interaction. Here we present a comprehensive investigation of XFe 4 Ge 2 (X = Y, Lu) and Mn 3 Pt, and find these materials to be filling-enforced magnetic topological metals. Our first-principles calculations show that XFe 4 Ge 2 (X = Y, Lu) host Dirac points near the Fermi level at high symmetry point S. These Dirac points are protected by $\text{P}\mathcal{T}$ symmetry ($\text{P}$ and $\mathcal{T}$ are inversion and time-reversal transformations, respectively) and a twofold screw rotation symmetry. Moreover, through breaking $\text{P}\mathcal{T}$ symmetry, the Dirac points would split into Weyl nodes. Mn 3 Pt is found to host fourfold degenerate band crossings in the whole high symmetry path of A – Z . We also utilize the GGA + U scheme to take into account the effect of Coulomb repulsion and find that the filling-enforced topological properties are naturally insensitive on U .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Gravitational index of the heterotic string

The fundamental heterotic string has a tower of BPS states whose supersymmetric index has an exponential growth in the charges. We construct the saddle-point of the gravitational path integral corresponding to this index. The saddle-point configuration is a supersymmetric rotating non-extremal Euclidean black hole. This configuration is singular in the two-derivative theory. We show that the addition of higher-derivative terms in four-dimensional N = 2 supergravity resolves the singularity. In doing so, we extend the recently-developed “new attractor mechanism” to include the effect of higher-derivative terms. Remarkably, the one-loop, four-derivative F-term contribution to the prepotential leads to a precise match of the gravitational and microscopic index. We also comment, using the effective theory near the horizon, on the possibility of a string-size near-extremal black hole. Our results clarify the meaning of different descriptions of this system in the literature. The thermal state transitions to a winding condensate and a gas of strings without ever reaching a small black hole, while the index is captured by the rotating Euclidean black hole solution and is constant and thus smoothly connected to the microscopic ensemble.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Around Which Stars Can TESS Detect Earth-like Planets? The Revised TESS Habitable Zone Catalog

In the search for life in the cosmos, NASA’s Transiting Exoplanet Survey Satellite (TESS) mission has already monitored about 74% of the sky for transiting extrasolar planets, including potentially habitable worlds. However, TESS only observed a fraction of the stars long enough to be able to find planets like Earth. We use the primary mission data—the first two years of observations—and identify 4239 stars within 210 pc that TESS observed long enough to see three transits of an exoplanet that receives similar irradiation to Earth: 738 of these stars are located within 30 pc. We provide reliable stellar parameters from the TESS Input Catalog that incorporates Gaia DR2 and also calculate the transit depth and radial velocity semiamplitude for an Earth-analog planet. Of the 4239 stars in the Revised TESS HZ Catalog, 9 are known exoplanet hosts—GJ1061, GJ1132, GJ3512, GJ685, Kepler-42, LHS1815, L98-59, RRCae, and TOI700—around which TESS could identify additional Earth-like planetary companions. Thirty-seven additional stars host yet unconfirmed TESS Objects of Interest: three of these orbit in the habitable zone—TOI203, TOI715, and TOI2298. For a subset of 614 of the 4239 stars, TESS has observed the star long enough to be able to observe planets throughout the full temperate, habitable zone out to the equivalent of Mars’ orbit. Thus, the Revised TESS Habitable Zone Catalog provides a tool for observers to prioritize stars for follow-up observation to discover life in the cosmos. These stars are the best path toward the discovery of habitable planets using the TESS mission data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Curvature-mediated spin textures in magnetic multi-layered nanotubes

The scientific and technological exploration of artificially designed three-dimensional magnetic nanostructures opens the path to exciting novel physical phenomena, originating from the increased complexity in spin textures, topology, and frustration in three dimensions. Theory predicts that the equilibrium magnetic ground state of two-dimensional systems which reflects the competition between symmetric (Heisenberg) and antisymmetric (Dzyaloshinskii-Moriya interaction (DMI)) exchange interaction is significantly modified on curved surfaces when the radius of local curvature becomes comparable to fundamental magnetic length scales. Here, we present an experimental study of the spin texture in an 8 nm thin magnetic multilayer with growth-induced in-plane anisotropy and DMI deposited onto the curved surface of a 1.8 {\mu}m long non-magnetic carbon nanowire with a 67 nm radius. Using magnetic soft x-ray tomography the three-dimensional spin configuration in this nanotube was retrieved with about 30nm spatial resolution. The transition between two vortex configurations on the two ends of the nanotube with opposite circulation occurs through a domain wall that is aligned at an inclined angle relative to the wire axis. Three-dimensional micromagnetic simulations support the experimental observations and represent a visualization of the curvature-mediated DMI. They also allow a quantitative estimate of the DMI value for the magnetic multilayered nanotube.

Josten, Elisabeth↗
DOE OSTI2024

Daytime variation in the aerosol indirect effect for warm marine boundary layer clouds in the eastern North Atlantic

Abstract. Warm boundary layer clouds in the eastern North Atlantic region exhibit significant diurnal variations in cloud properties. However, the diurnal cycle of the aerosol indirect effect (AIE) for these clouds remains poorly understood. This study takes advantage of recent advancements in the spatial resolution of geostationary satellites to explore the daytime variation in the AIE by estimating the cloud susceptibilities to changes in cloud droplet number concentration (Nd). Cloud retrievals for the month of July over 4 years (2018–2021) from the Spinning Enhanced Visible and Infrared Imager (SEVIRI) on Meteosat-11 over this region are analyzed. Our results reveal a significant “U-shaped” daytime cycle in susceptibilities of the cloud liquid water path (LWP), cloud albedo, and cloud fraction. Clouds are found to be more susceptible to Nd perturbations at noon and less susceptible in the morning and evening. The magnitude and sign of cloud susceptibilities depend heavily on the cloud state defined by cloud LWP and precipitation conditions. Non-precipitating thin clouds account for 44 % of all warm boundary layer clouds in July, and they contribute the most to the observed daytime variation. Non-precipitating thick clouds are the least frequent cloud state (10 %), and they exhibit more negative LWP and albedo susceptibilities compared to thin clouds. Precipitating clouds are the dominant cloud state (46 %), but their cloud susceptibilities show minimal variation throughout the day. We find evidence that the daytime variation in LWP and albedo susceptibilities for non-precipitating clouds is influenced by a combination of the diurnal transition between non-precipitating thick and thin clouds and the “lagged” cloud responses to Nd perturbations. The daytime variation in cloud fraction susceptibility for non-precipitating thick clouds can be attributed to the daytime variation in cloud morphology (e.g., overcast or broken). The dissipation and development of clouds do not adequately explain the observed variation in cloud susceptibilities. Additionally, daytime variation in cloud susceptibility is primarily driven by variation in the intensity of cloud response rather than the frequency of occurrence of cloud states. Our results imply that polar-orbiting satellites with an overpass time at 13:30 LT underestimate daytime mean values of cloud susceptibility, as they observe susceptibility daily minima in the study region.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Atomic-scale mechanism of carbon nucleation from a deep crustal fluid by replica exchange reactive molecular dynamics simulation

Here we present a mechanistic model of carbon nucleation and growth from a fluid at elevated temperature (T) and pressure conditions, typical of those found in the shallow Earth’s lithosphere. Our model uses a replica exchange reactive molecular dynamics framework in which molecular configurations are swapped between adjacent T replica at regular intervals according to underlying statistical mechanics. This framework allows predicting complex molecular structures and thermodynamics while remaining computationally efficient. Here we simulate the reactivity of an unstable mixture of CO 2 and CH 4 at 1000 K and 1 GPa. We find that the path to thermodynamic equilibrium is initially entropy-driven, producing a diversity of short-lived species, including various alcohols with intermediate carbon oxidation states. Cyclic and polycyclic radicals that are sometimes resonance-stabilized form next and set the stage for carbon nucleation. The carbon exsolution process releases abundant water, is exothermic and starts with the nucleation of a large aggregate of hydrogenated graphene flakes from covalently bonded polycyclic units. The carbon backbone of this nucleus subsequently grows into a hydrogen-depleted fullerene-like structure, before evolving toward a partially bilayered graphene layer. Overall, our results show that the mechanism of graphitic C formation is certainly not bimolecular, and that it may involve a combination of key condensation and radical chain reactions. This will help understand the isotopic, and reactive characteristics of carbon-bearing fluids during their upward transit through the Earth’s mantle and crust. Moreover, the mechanistic insights outlined here present intriguing similarities with the process of soot and interstellar dust formation, which suggests that the widespread distribution of abiotic polyaromatic and graphitic material on Earth and beyond may reflect the prevalence of a fundamental chemical pathway.

58 GEOSCIENCES↗
DOE OSTI2021

Voltage-controlled long-range propagation of indirect excitons in a van der Waals heterostructure

Indirect excitons (IXs), also known as interlayer excitons, can form the medium for excitonic devices whose operation is based on controlled propagation of excitons. Here, a proof of principle for excitonic devices was demonstrated in GaAs heterostructures where the operation of excitonic devices is limited to low temperatures. IXs in van der Waals transition-metal dichalcogenide (TMD) heterostructures are characterized by high binding energies making IXs robust at room temperature and offering an opportunity to create excitonic devices operating at high temperatures suitable for applications. However, a characteristic feature of TMD heterostructures is the presence of moiré superlattice potentials, which are predicted to cause modulations of IX energy reaching tens of meV. These in-plane energy landscapes can lead to IX localization, making IX propagation fundamentally different in TMD and GaAs heterostructures and making uncertain whether long-range IX propagation, sufficiently long to allow for creating elaborate excitonic devices and circuits, can be realized in TMD heterostructures. In this work, we realize long-range IX propagation with the 1/e IX luminescence decay distances reaching 13 microns in a MoSe 2 /WSe 2 heterostructure. We trace the IX luminescence along the IX propagation path. In the presented TMD materials, the long-range IX propagation occurs up to ~50 K. This is a step toward the room temperature operation, which can be realized in TMD heterostructures due to the high IX binding energy. We also realize control of the long-range IX propagation by voltage. The IX luminescence signal in the drain of an excitonic transistor is controlled within 40 times by gate voltage. The control of the IX propagation in the MoSe 2 /WSe 2 heterostructure is governed by new mechanisms, beyond the mechanism for controlling IX transport by an energy barrier to IX propagation (or a trap for IXs) created by the gate electrode, known since the studies of GaAs heterostructures. We discuss the origin of the voltage-controlled long-range IX propagation in the MoSe 2 /WSe 2 heterostructure, in particular, the electric-field control of the moiré potential.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Renewable energy and biological conservation in a changing world

Without a shift to renewable energy sources, climate change will have adverse effects on many terrestrial and aquatic species. On the other hand, replacing fossil fuels with renewable energy will have different effects on wildlife, some negative. To protect biota, while navigating the complexities surrounding the transition to renewable energy, will require sharing knowledge between energy experts and wildlife experts, as well as policy makers and resource managers. This special issue is intended to advance the conversation. Interactions between renewable energy facilities and fauna are complex. Each source of renewable energy has its own conservation concerns, and each presents its own set of opportunities for mitigation; Other concerns and mitigations are shared. In this overview, we review climate risks to biota, clarify the complementarities among renewables for the conservation community, and summarize research on energy effects on biota for the energy community. The papers invited for this special issue address fossil (coal, oil, natural gas) and renewable energy (terrestrial biomass energy, hydropower, marine-hydrokinetic energy, wind energy, solar energy) and affected fauna. Finally, we hope that the results of these studies, and others like them, set us on a path toward low-carbon energy systems that provide society with energy while protecting future biodiversity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

A rheological model for loose sands with insights from DEM

A rheological model for loose granular media is developed to capture both solid-like and fluid-like responses during shearing. The proposed model is built by following the mathematical structure of an extended Kelvin–Voigt model, where an elastic spring and plastic slider act in parallel to a viscous damper. This arrangement requires the partition of the total stress into rate-independent and rate-dependent stress components. To model the solid-like behavior, a simple frictional plasticity model is adopted without modifications, thus contributing to the rate-independent stress. Instead, the fluid-like or rate-dependent stress is further decomposed into deviatoric and volumetric parts, by proposing a new formulation based on a combination of the μ(I) relation, originally developed under pressure-controlled shear, with a pressure-shear rate relation derived under volume-controlled shear. The proposed formulation allows the model to capture both the increase in the friction coefficient and the enhanced dilation at high shear rates. High-fidelity simulation data, obtained from discrete element method and multiscale modelling, are used to evaluate the performance of the proposed constitutive model. The model provides accurate results under both drained and undrained simple shear paths across a wide range of shear rates. Furthermore, it successfully reproduces at much lower computational cost the flowslide mobility computed through multiscale simulations, which is primarily regulated by the shear rate dependence of the material properties during the dynamic runout stage.

Elasticity↗
DOE OSTI2021

Charged Bosons Made of Fermions in Bilayer Structures with Strong Metallic Screening

Two-dimensional monolayer structures of transition metal dichalogenides (TMDs) have been shown to allow many higher-order excitonic bound states, including trions (charged excitons), biexcitons (excitonic molecules), and charged biexcitons. Here, we report here experimental evidence and the theoretical basis for a new bound excitonic complex, consisting of two free carriers bound to an exciton in a bilayer structure. Our experimental measurements on structures made using two different materials show a new spectral line at the predicted energy with two different TMD materials (MoSe 2 and WSe 2 ) with both n- and p-doping, if and only if all the required theoretical conditions for this complex are fulfilled, in particular, only in the presence of a parallel metal layer that significantly screens the repulsive interaction between the like-charge carriers. Because these four-carrier bound states are charged bosons, they could eventually be the basis for a new path to superconductivity without Cooper pairing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Optical vortex manipulation for topological quantum computation

Topological quantum computation based on Majorana bound states may enable new paths to fault-tolerant quantum computing. Several recent experiments have suggested that the vortex cores of topological superconductors, such as iron-based superconductors, may host Majorana bound states at zero energy. However, quantum computation with these zero-energy vortex bound states requires precise and fast manipulation of individual vortices, which is difficult to do in a scalable manner. To address this issue, in this study we propose a control scheme based on local heating via, for example, scanning optical microscopy to braid vortex-bound Majorana zero modes in a two-dimensional topological superconductor. First, we derive the conditions required for transporting a single vortex between two defects in the superconducting material by trapping it with a hot spot generated by local optical heating. Equipped with critical conditions for the vortex motion, we then establish the ideal material properties for vortex braiding and describe how transition errors resulting from finite speed and/or temperature can be minimized. Our work paves the way toward optical or microscopic control of zero-energy vortex bound states in two-dimensional topological superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Digital Twin Model for Advanced Manufacture of a Rotating Detonation Engine Injector

A digital twin material model (DTMM) of an additive manufacturing (AM) process was created to advance the state of the art in rotating detonation engine (RDE) injector design. Current RDE injectors are designed with large pressure drops, enabling a stable and repeatable combustion process. However, this comes at the cost of system efficiency. For the technology to transition to commercial fossil-based power generation, it is important to develop injectors with reduced flow losses. Low-loss injectors are difficult to design and manufacture with conventional manufacturing techniques. AM enables new design options, but the AM manufacturing process must be thoroughly understood to result in a robust design. A DTMM provides the necessary insight by defining the cause-effect relationships between process parameters, microstructure features, and properties. Therefore, a DTMM to support the design and manufacturing process was developed and applied to the design of a new additively manufactured low-loss injector. The injector combustion behavior was characterized through hot-fire tests, and mechanical performance was compared to the DTMM predictions. The two project goals were the successful development of the DTMM and the demonstration of an improved RDE injector design. The RDE injector design and DTMM developments occurred on parallel but dependent paths. The injector was designed to reduce pressure drop by increasing the cross-sectional flow area ratio between the injector air passages and the combustor annulus. This resulted in less structural material, raising the concern that thin members would be susceptible to high-cycle fatigue (HCF) under the periodic loading inherent to an RDE. It was most important for the DTMM to predict behavior in these features; therefore, the injector design concept guided the material thicknesses used in fatigue tests. The DTMM development started by manufacturing a series of coupons over the range of possible AM process variations. A design-of-experiment approach was used to select which process variable combinations gave the most efficient coverage relevant to the injector design space. The microstructure in each of these coupons was characterized, and then computational methods were used to create a numerical model of the correlation between process variables and microstructure. Next, a set of HCF samples were tested to calibrate existing models that map microstructure to HCF performance. Together, these two links formed the DTMM that calculates HCF behavior from AM process variables. Two injector prototypes were additively manufactured. The first injector design strategy aggressively pursued low-loss performance by substantially increasing the oxidizer flow area. The combination of manufacturing lead times and the fatigue testing schedule meant that the DTMM was not available when building this first prototype. Therefore, its process parameters were chosen based on a manual review of the available coupon data. This prototype was built successfully and evaluated in 58 combustion tests. Sustained detonation was achieved with remarkably reduced pressure loss, and some tests even displayed pressure loss characteristics similar to conventional gas turbine combustors. This achieved the project goal of improving RDE injector design. The second injector was manufactured according to the optimized parameters predicted by the DTMM. The flow area modifications of this injector were less aggressive than the first injector since demonstrating low pressure loss was not an objective of the second hot-fire test series. Rather, the test objective was to cause high cycle fatigue failure in the part due to periodic loading from the rotating detonation wave. The observed number of cycles to failure was to be compared to the number predicted by the DTMM and thereby assess the utility of the DTMM in component design. However, the required level of vibration was not obtained during combustion. Therefore, high cycle fatigue was not experienced in the hot-fire tests of the second injector. Fatigue data was obtained by further testing the second injector in a conventional HCF test apparatus. The injector demonstrated HCF strength above the DTMM prediction. In fact, it did not fail and testing was only discontinued due to reaching the end of the period of performance. This points to some success in the project’s primary goal of successfully developing and applying the DTMM to a component design. Implementing the DTMM recommendations for optimal processing parameters led to a part with acceptable properties. The DTMM was also shown to be an efficient correlator of data and to provide insight into the relationship between process settings, microstructure, and property performance. However, the failure of the DTMM prediction to match the experimental result of the injector fatigue test also points to the need to include significantly more data in the model development. In this project, coupons made with identical processing parameters exhibited drastically different properties from each other and from the injector part, which clearly influences the accuracy of a model that predicts performance based on parameters. Uncertainties in the build process must be quantified to develop more robust models. A denser and broader matrix of coupon process and geometry variations, several repeated builds of every point, more in-situ build process measurements, and direct observation of tensile and HCF sample microstructure (as opposed to separate microstructure specimens) are recommendations to improve future AM modeling efforts.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

Assessment of Cloud-Based Applications Enabling a Scalable Risk-Informed Predictive Maintenance Strategy Across the Nuclear Fleet

The current light water reactor fleet uses time-based or failure-based maintenance strategies to achieve high-capacity factors. But to make nuclear more competitive in the energy market, these reactors could utilize emerging technologies in terms of artificial intelligence (AI) and cloud computing to enable a cost-effective, predictive maintenance strategy. This report examines the feasibility of cloud computing for the nuclear industry’s needs in terms of the cloud’s computing capabilities, feasibility, and regulatory concerns. The technical viability of cloud computing was analyzed using one year worth of data from a boiling water reactor’s safety relief valve. Models were hosted on a local desktop, Idaho National Laboratory’s high-performance computer, and Microsoft Azure. Data was loaded, processed, and two types of models were trained in an A/B fashion. Based on the speed at which these actions were completed, it was used to determined that cloud computing has adequate computing resources. Additionally, the computing power can scale with the demanded load. To enable cloud computing in the existing fleet, additional sensors, networks, and other requirements must be implemented to ensure a smooth transition from current maintenance strategies. However, there is a benefit as the plant no longer needs manage their own servers, software, cybersecurity, and IT support staff. Many of these features can be offloaded on to the cloud provider. A comprehensive analysis was completed that showed the current annual cost of operating is more expensive than using cloud computing resources. Lastly, the regulatory framework does not explicitly address AI or autonomous control. Currently, the NRC and other regulatory bodies are evaluating providing guidance to address gaps rather than new regulations to address the use of AI and ML. But since many of the AI applications are focused on non-safety related applications, such as balance-of-plant components, they will likely have little or no regulatory restrictions or necessary approvals. Demonstrating how AI can improve maintenance and operation of these non-safety related systems seems like the likely path forward for implementing AI and cloud computing resources inside nuclear power plants (NPPs).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Towards controlled synthesis of 2D crystals by chemical vapor deposition (CVD)

We report the emergence of two-dimensional (2D) materials has captured the imagination of researchers since graphene was first exfoliated from graphite in 2004. Their exotic properties give rise to many exciting potential applications in advanced electronic, optoelectronic, energy and biomedical technologies. Scalable growth of high quality 2D materials is crucial for their adoption in technological applications the same way the arrival of high quality silicon single crystals was to the semiconductor industry. A huge amount of effort has been devoted to grow large-area, highly crystalline 2D crystals such as graphene and transition metal dichalcogenides (TMDs) through various methods. While CVD growth of wafer-scale monolayer graphene and TMDs has been demonstrated, considerable challenges still remain. In this perspective, we advocate for the focus on the crystal growth morphology as an underpinning for understanding, diagnosing and controlling the CVD process and environment for 2D material growth. Like snowflakes in nature, 2D crystals exhibit a rich variety of morphologies under different growth conditions. The mapping of crystal shapes in the growth parameter space “encodes” a wealth of information, the deciphering of which will lead to better understanding of the fundamental growth mechanism and materials properties. To this end, we envision a collective effort by the 2D materials community to establish the correlation between crystal shapes and the intrinsic thermodynamic and kinetic parameters for CVD reactions through integrated crystal growth experiment, database development and machine learning assisted predictive modeling, which will pave a robust path towards controlled synthesis of 2D materials and heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Phonon spectrum in the spin-Peierls phase of CuGeO 3

CuGeO 3 has long been studied as a prototypical example of the spin-Peierls transition in a 𝑆 = 1/2 Heisenberg chain. Despite intensive investigation of this quasi-one-dimensional material, systematic measurements and calculations of the phonon excitations in the dimerized phase have not to date been possible, leaving certain aspects of the spin-Peierls phenomenon unresolved. We perform state-of-the-art density functional theory (DFT) calculations to compute the electronic structure and phonon dynamics in the low-temperature dimerized phase. We also perform high-resolution neutron spectroscopy to measure the full phonon spectrum over multiple Brillouin zones. We find excellent agreement between our numerical and experimental results that extend to all measurement temperatures. Notable features of our phonon spectra include a number of steeply dispersive modes, nonmonotonic dispersion features, and specific phonon anticrossings, which we relate to the mode eigenvectors. By calculating the magnetic interactions within DFT and studying the effects of different phonon modes on the superexchange paths, we discuss the possibility of observing spin-phonon hybridization effects in experiments performed both in and out of equilibrium.

density functional theory↗