Results for “traffic simulation” — Page 25

NASA NTRS2005

Airborne Management of Traffic Conflicts in Descent With Arrival Constraints

NASA is studying far-term air traffic management concepts that may increase operational efficiency through a redistribution of decisionmaking authority among airborne and ground-based elements of the air transportation system. One component of this research, En Route Free Maneuvering, allows trained pilots of equipped autonomous aircraft to assume responsibility for traffic separation. Ground-based air traffic controllers would continue to separate traffic unequipped for autonomous operations and would issue flow management constraints to all aircraft. To evaluate En Route Free Maneuvering operations, a human-in-the-loop experiment was jointly conducted by the NASA Ames and Langley Research Centers. In this experiment, test subject pilots used desktop flight simulators to resolve conflicts in cruise and descent, and to adhere to air traffic flow constraints issued by test subject controllers. Simulators at NASA Langley were equipped with a prototype Autonomous Operations Planner (AOP) flight deck toolset to assist pilots with conflict management and constraint compliance tasks. Results from the experiment are presented, focusing specifically on operations during the initial descent into the terminal area. Airborne conflict resolution performance in descent, conformance to traffic flow management constraints, and the effects of conflicting traffic on constraint conformance are all presented. Subjective data from subject pilots are also presented, showing perceived levels of workload, safety, and acceptability of autonomous arrival operations. Finally, potential AOP functionality enhancements are discussed along with suggestions to improve arrival procedures.

Doble, Nathan A.↗

NASA NTRS1995

A Laboratory Glass-Cockpit Flight Simulator for Automation and Communications Research

A laboratory glass-cockpit flight simulator supporting research on advanced commercial flight deck and Air Traffic Control (ATC) automation and communication interfaces has been developed at the Aviation Operations Branch at the NASA Ames Research Center. This system provides independent and integrated flight and ATC simulator stations, party line voice and datalink communications, along with video and audio monitoring and recording capabilities. Over the last several years, it has been used to support the investigation of flight human factors research issues involving: communication modality; message content and length; graphical versus textual presentation of information, and human accountability for automation. This paper updates the status of this simulator, describing new functionality in the areas of flight management system, EICAS display, and electronic checklist integration. It also provides an overview of several experiments performed using this simulator, including their application areas and results. Finally future enhancements to its ATC (integration of CTAS software) and flight deck (full crew operations) functionality are described.

Pisanich, Gregory M.↗

NASA NTRS1998

Reconstruction of the 1994 Pittsburgh Airplane Accident Using a Computer Simulation

On September 8, 1994, a Boeing 737-300 passenger airplane was on a downwind approach to the Pittsburgh International Airport at an altitude of 5000 feet above ground level (6000 feet MSL). While in a shallow left turn onto a downwind approach heading, the airplane crossed into the vortex trail of a Boeing 727 flying in the same approach pattern about 4 miles ahead. The B-737 airplane rolled and turned sharply to the left, exited the vortex wake and plunged into the ground. Weather was not a factor in the accident. The airplane was equipped with a 11+ channel digital Flight Data Recorder (FDR) and a multiple channel Cockpit Voice Recorder (CVR). Both recorders were recovered from the crash site and provided excellent data for the development of an accident scenario. Radar tracking of the two airplanes as well as the indicated air speed (IAS) perturbations clearly visible on the B-737 FDR recordings indicate that the upset was apparently initiated by the airplane's crossing into the wake of the B-727 flying ahead in the same traffic pattern. A 6 degree-of-freedom simulation program for the B-737 airplane using MATLAB and SIMULINK was constructed. The simulation was initialized at the stabilized flight conditions of the airplane about 13 seconds prior to its entry into the vortex trail of the B-727 airplane. By assuming a certain combination of control inputs, it was possible to produce a simulated motion that closely matched that recorded on the FDR.

Parks, Edwin K.↗

NASA NTRS2016

Air Traffic Controller Acceptability of Unmanned Aircraft System Detect-and-Avoid Thresholds

A human-in-the-loop experiment was conducted with 15 retired air traffic controllers to investigate two research questions: (a) what procedures are appropriate for the use of unmanned aircraft system (UAS) detect-and-avoid systems, and (b) how long in advance of a predicted close encounter should pilots request or execute a separation maneuver. The controller participants managed a busy Oakland air route traffic control sector with mixed commercial/general aviation and manned/UAS traffic, providing separation services, miles-in-trail restrictions and issuing traffic advisories. Controllers filled out post-scenario and post-simulation questionnaires, and metrics were collected on the acceptability of procedural options and temporal thresholds. The states of aircraft were also recorded when controllers issued traffic advisories. Subjective feedback indicated a strong preference for pilots to request maneuvers to remain well clear from intruder aircraft rather than deviate from their IFR clearance. Controllers also reported that maneuvering at 120 seconds until closest point of approach (CPA) was too early; maneuvers executed with less than 90 seconds until CPA were more acceptable. The magnitudes of the requested maneuvers were frequently judged to be too large, indicating a possible discrepancy between the quantitative UAS well clear standard and the one employed subjectively by manned pilots. The ranges between pairs of aircraft and the times to CPA at which traffic advisories were issued were used to construct empirical probability distributions of those metrics. Given these distributions, we propose that UAS pilots wait until an intruder aircraft is approximately 80 seconds to CPA or 6 nmi away before requesting a maneuver, and maneuver immediately if the intruder is within 60 seconds and 4 nmi. These thresholds should make the use of UAS detect and avoid systems compatible with current airspace procedures and controller expectations.

unmanned aircraft systems↗

NASA NTRSDate not supplied

Objective Measurement Assessment of Departure Advisories for Ramp Controllers from a Human-In-The-Loop Simulation

NASA has developed and demonstrated an integrated arrival, departure, and surface concept and technology for efficient air traffic management in busy terminal environments under the Airspace Technology Demonstration 2 (ATD-2) subproject. In April/May 2019, NASA conducted a human-in-the-loop (HITL) simulation with ramp and tower controllers having experience at Dallas/Fort Worth International Airport (DFW). The purpose of this HITL was to evaluate the impacts of various surface metering goals in ramp operations at DFW and test new features of the ATD-2 ramp controller decision support tools. This paper evaluates the quantitative metrics from the simulation results related to airport performance and surface metering given various departure scheduling advisories for ramp controllers. The objective measurements compared include the controller’s compliance with the target times for pushback and spot arrival, the number of metered flights, aircraft gate hold and taxi time, runway throughput, and the number of aircraft on the surface. The simulation results show that there were no statistically significant benefits from surface metering at DFW for airport performance due to several simulation artifacts notably different from real operations. Considering controller workload and situation awareness, following either gate pushback or spot arrival advisory could be a better metering option than utilizing both advisories when surface metering is applied at DFW.

airport ramp traffic control decision support↗

NASA NTRS1994

Information for Lateral Aircraft Spacing Enabling Closely-Spaced Runway Operations During Instrument-Weather Conditions

In an effort to increase airport capacity, the U.S. plans on investing nearly $6 billion a year to properly maintain and improve the nation's major airports. Current FAA standards however, require a reduction in terminal operations during instrument-weather conditions at many airports, causing delays and reducing airport capacity. NASA, in cooperation with the FAA, has developed the Terminal Area Productivity Program to achieve clear-weather capacity in instrument- weather conditions for all phases of flight. This paper describes a series of experiments planned to investigate the conceptual design of different systems that provide information to flight crews regarding nearby traffic during the approach phase of flight. The purpose of this investigation is to identify and evaluate different display and auditory interfaces to the crew for use in closely-spaced parallel runway operations. Three separate experiments are planned for the investigation. The first two experiments will be conducted using part-task flight simulators located at the MIT Aeronautical Systems Laboratory and at NASA Ames. The third experiment will be conducted in the Advanced Concepts Flight Simulator, a generic "glass-cockpit" simulator at NASA Ames. Subjects for each experiment will be current glass-cockpit pilots from major U.S. air carriers. Subject crews will fly several experimental scenarios in which pseudo-aircraft are "blundered" into the subject aircraft simulation. Runway spacing, longitudinal aircraft separation, aircraft performance and traffic information will be varied. Analyses of the subject reaction times in evading the blundering aircraft and the resulting closest points of approach will be conducted. This paper presents a preliminary examination of the data recorded during the part-task experiments. The impact of traffic information on closely-spaced parallel runway operations is discussed, cockpit displays to aid these operations are examined, and topics for future research are suggested.

Thrush, Trent↗

NASA NTRS1990

Evolutionary Space Station Guidance Navigation and Control (GN/C) study

The guidance, navigation, and control (GN&C) techniques and equipment to support evolutionary space station concepts were analyzed. Simulations of the evolutionary space station configurations and operational concepts were conducted to analyze the attitude control, reboost, and traffic management accommodation requirements. A summary of the mission concepts, space station configurations, simulation results, and the impact on the baseline GN&C systems are presented.

Kennedy, Jerry↗

NASA NTRSDate not supplied

Fast Aircraft Separation Calculations for Gradient Based Optimization of Airspace Simulations

Simulations of airspace operational concepts can play a significant role in determining future paradigms that would allow for a safe increase in airspace density. In particular, airspace simulations which are capable of handling large numbers of aircraft act as an enabling capability for the testing of proposed airspace operational concepts. Simulations allowing for gradient based optimization methods are particularly attractive, since they would potentially allow for an efficient and empirical means to derive best operational practices. These could also allow for vehicle multidisciplinary design and optimization studies to include air traffic management considerations as a discipline. But any large scale simulation of airspace operations must include some methodology for addressing airspace separation requirements, which in the most direct sense would be tracked in a manner that computationally grows as a quadratic function of the number of simulated aircraft. Efficient indirect methods have been developed in certain contexts to address this limitation. However, any means of addressing separation requirements in a gradient based optimization context should be implemented by functions which provide analytic derivative information to maximize numerical precision and computational efficiency. In this paper, a fast and differentiable separation metric is described in application to gradient based optimization of airspace operations. Rather than computing the separation distance between every pair of aircraft in a simulation, this method effectively reduces the problem to a smaller relevant set using a geometric decomposition. This method guarantees that the smallest distance at all points in simulated time is determined exactly. When used in an optimization constraint context, this guarantees that a minimum separation is maintained between all pairs of aircraft. The presented metric has logarithmic computational growth with respect to the number of simulated aircraft, and is shown to perform well in a series of notional 2D airspace optimization problems when used to enforce specified airborne separation constraints. Results show that this is notably faster than a direct pairwise distance computing metric for optimizations involving both small and large numbers of aircraft, yet enforce separation requirements to the same tolerance. It is shown that this favorable scalability is an enabling capability for more sophisticated air traffic management conceptual studies.

Optimization↗

NASA NTRS2019

Fast-Time Simulation for Evaluating the Impact of Estimated Flight Ready Time Uncertainty on Surface Metering

NASA has been developing and demonstrating new concepts and technologies for Integrated Arrival, Departure, and Surface (IADS) traffic management capabilities under the Airspace Technology Demonstration 2 (ATD-2) project. One of the IADS capabilities in the ATD-2 project is surface metering enabled by a tactical surface scheduler to provide controllers with the pushback advisories for departures at gates. The tactical surface scheduler uses the estimated flight ready times provided by airlines, called Earliest Off-Block Times (EOBTs), as input to calculate the target off-block times for pushback advisories. However, the EOBTs are often inaccurate and deviate from the actual flight ready times, which may reduce the benefits of surface metering. In this paper, a linear regression model is developed to model the EOBT uncertainty distribution over time based on actual EOBT data collected at Charlotte airport. This EOBT model is integrated with a tactical surface scheduler and a fast-time simulation tool. To evaluate the impact of the EOBT accuracy on airport surface operations, fast-time simulations are implemented for selected traffic scenarios under different levels of modelled EOBT accuracy. The simulation results show that the EOBT uncertainty affects several performance metrics related to the surface metering, such as gate hold, taxi time reduction, and target takeoff time predictability, which in turn influences ATD-2's scheduler performance.

tactical surface scheduler↗

NASA NTRS2019

Fast-Time Simulation for Evaluating the Impact of Estimated Flight Ready Time Uncertainty on Surface Metering

NASA has been developing and demonstrating new concepts and technologies for Integrated Arrival, Departure, and Surface (IADS) traffic management capabilities under the Airspace Technology Demonstration 2 (ATD-2) project. One of the IADS capabilities in the ATD-2 project is surface metering enabled by a tactical surface scheduler to provide controllers with the pushback advisories for departures at gates. The tactical surface scheduler uses the estimated flight ready times provided by airlines, called Earliest Off-Block Times (EOBTs), as input to calculate the target off-block times for pushback advisories. However, the EOBTs are often inaccurate and deviate from the actual flight ready times, which may reduce the benefits of surface metering. In this paper, a linear regression model is developed to model the EOBT uncertainty distribution over time based on actual EOBT data collected at Charlotte airport. This EOBT model is integrated with a tactical surface scheduler and a fast-time simulation tool. To evaluate the impact of the EOBT accuracy on airport surface operations, fast-time simulations are implemented for selected traffic scenarios under different levels of modelled EOBT accuracy. The simulation results show that the EOBT uncertainty affects several performance metrics related to the surface metering, such as gate hold, taxi time reduction, and target takeoff time predictability, which in turn influences ATD-2's scheduler performance.

tactical surface scheduler↗

NASA NTRS2011

TPSAS-NF1676L-12441-DND

The increasing presence of airport surface surveillance technologies has spawned a strong interest in airport surface traffic management research; the vast majority has assumed that the airport’s runway configuration is known and constant. Tactical Runway Configuration Management (TRCM), one component of NASA’s System Oriented Runway Management concept, plans the airport configuration to optimize traffic efficiency for the forecast weather, traffic, and other factors. While planning runway configuration can provide benefit and is required by other automation concepts, larger benefits are possible by planning other airport configuration decisions, such as runway assignment policies, that are currently made manually by controllers. A laboratory prototype of the TRCM algorithm which selects optimal airport configuration schedules has been implemented and studied within a simulation environment. The presentation will describe simulation results for several airports, under various weather and traffic conditions. The sequence of airport configurations recommended by TRCM result in significantly less delay than the airport configurations that were actually used by controllers, illustrating both the potential benefit from airport configuration optimization and the ability of TRCM to provide effective airport configuration schedules. The application to several, distinct airports demonstrates the approach is capable of handling the differences between airports with a common algorithm, while providing decision support that respects the current procedures at those airports. Consequently, TRCM is able to be deployed to any airport within the current National Airspace System. The TRCM algorithmic approach is also extensible to future operational scenarios. NASA is in the process of transferring the initial TRCM technology to the FAA. Future research will extend the concept and algorithm to provide coordinated plans for metroplex airports and study NextGen applications.

Stephen Atkins↗

NASA NTRS2011

TPSAS-NF1676L-12263-DND

The increasing presence of airport surface surveillance technologies has spawned a strong interest in airport surface traffic management research; the vast majority has assumed that the airport’s runway configuration is known and constant. Tactical Runway Configuration Management (TRCM), one component of NASA’s System Oriented Runway Management concept, plans the airport configuration to optimize traffic efficiency for the forecast weather, traffic, and other factors. While planning runway configuration can provide benefit and is required by other automation concepts, larger benefits are possible by planning other airport configuration decisions, such as runway assignment policies, that are currently made manually by controllers. A laboratory prototype of the TRCM algorithm which selects optimal airport configuration schedules has been implemented and studied within a simulation environment. The presentation will describe simulation results for several airports, under various weather and traffic conditions. The sequence of airport configurations recommended by TRCM result in significantly less delay than the airport configurations that were actually used by controllers, illustrating both the potential benefit from airport configuration optimization and the ability of TRCM to provide effective airport configuration schedules. The application to several, distinct airports demonstrates the approach is capable of handling the differences between airports with a common algorithm, while providing decision support that respects the current procedures at those airports. Consequently, TRCM is able to be deployed to any airport within the current National Airspace System. The TRCM algorithmic approach is also extensible to future operational scenarios. NASA is in the process of transferring the initial TRCM technology to the FAA. Future research will extend the concept and algorithm to provide coordinated plans for metroplex airports and study NextGen applications.

Stephen Atkins↗

NASA NTRS2014

ACES Study of DAA-Mitigated UAS Operations SC-228 Requirements Sub Group

Realization of the expected proliferation of Unmanned Aircraft System (UAS) operations in the National Airspace System (NAS) depends on the development and validation of performance standards for UAS Detect and Avoid (DAA) Systems. The RTCA Special Committee 228 is charged with leading the development of draft Minimum Operational Performance Standards (MOPS) for UAS DAA Systems. NASA, as a participating member of RTCA SC-228 is committed to supporting the development and validation of draft requirements as well as the safety substantiation and end-to-end assessment of DAA system performance. A recent study conducted using NASA's ACES (Airspace Concept Evaluation System) simulation capability begins to address questions surrounding the development of draft MOPS for DAA systems by assessing DAA performance in a NAS-wide context. ACES analyses were conducted to determine the impact of varying elements of UAS pilot performance and uncertainty mitigations on DAA system performance. Simulations were conducted with recorded cooperative and non-cooperative VFR (Visual Flight Rules) traffic to accurately model UAS encounters with other NAS traffic (ATC (Air Traffic Control) being responsible for separation with other IFR (Instrument Flight Rules) aircraft) and with roughly 25, 000 simulated UAS operations The number of Loss of Well Clear (LoWC) events were recorded across the range of independent variables: pilot response time, horizontal LoWC prediction buffer and horizontal LoWC resolution buffer. The number of LoWC events was compared to the unmitigated case (without the benefit of a DAA system) to determine the resultant risk-ratio for each of 8 simulation conditions. The parameter trades presented by the resultant DAA system performance (risk ratio) will be used by SC 228 to inform decisions about future requirements development and validation efforts.

Detect-and-Avoid↗

NASA NTRS2006

Monte Carlo Analysis of Airport Throughput and Traffic Delays Using Self Separation Procedures

This paper presents the results of three simulation studies of throughput and delay times of arrival and departure operations performed at non-towered, non-radar airports using self-separation procedures. The studies were conducted as part of the validation process of the Small Aircraft Transportation Systems Higher Volume Operations (SATS HVO) concept and include an analysis of the predicted airport capacity using with different traffic conditions and system constraints under increasing levels of demand. Results show that SATS HVO procedures can dramatically increase capacity at non-towered, non-radar airports and that the concept offers the potential for increasing capacity of the overall air transportation system.

Consiglio, Maria C.↗

NASA NTRS2016

Conducting Safe and Efficient Airport Surface Operations in a NextGen Environment

The Next Generation Air Transportation System (NextGen) vision proposes many revolutionary operational concepts, such as surface trajectory-based operations (STBO) and technologies, including display of traffic information and movements, airport moving maps (AMM), and proactive alerts of runway incursions and surface traffic conflicts, to deliver an overall increase in system capacity and safety. A piloted simulation study was conducted at the National Aeronautics and Space Administration (NASA) Langley Research Center to evaluate the ability of a flight crew to conduct safe and efficient airport surface operations while utilizing an AMM. Position accuracy of traffic was varied, and the effect of traffic position accuracy on airport conflict detection and resolution (CD&R) capability was measured. Another goal was to evaluate the crew's ability to safely conduct STBO by assessing the impact of providing traffic intent information, CD&R system capability, and the display of STBO guidance to the flight crew on both head-down and head-up displays (HUD). Nominal scenarios and off-nominal conflict scenarios were conducted using 12 airline crews operating in a simulated Memphis International Airport terminal environment. The data suggest that all traffic should be shown on the airport moving map, whether qualified or unqualified, and conflict detection and resolution technologies provide significant safety benefits. Despite the presence of traffic information on the map, collisions or near-collisions still occurred; when indications or alerts were generated in these same scenarios, the incidents were averted. During the STBO testing, the flight crews met their required time-of-arrival at route end within 10 seconds on 98 percent of the trials, well within the acceptable performance bounds of 15 seconds. Traffic intent information was found to be useful in determining the intent of conflicting traffic, with graphical presentation preferred. The CD&R system was only minimally effective during STBO because the prevailing visibility was sufficient for visual detection of conflicting traffic. Overall, the pilots indicated STBO increased general situation awareness but also negatively impacted workload, reduced the ability to watch for other traffic, and increased head-down time.

Jones, Denise R.↗

NASA NTRS1999

Development of a Free-Flight Simulation Infrastructure

In anticipation of a projected rise in demand for air transportation, NASA and the FAA are researching new air-traffic-management (ATM) concepts that fall under the paradigm known broadly as ":free flight". This paper documents the software development and engineering efforts in progress by Seagull Technology, to develop a free-flight simulation (FFSIM) that is intended to help NASA researchers test mature-state concepts for free flight, otherwise referred to in this paper as distributed air / ground traffic management (DAG TM). Under development is a distributed, human-in-the-loop simulation tool that is comprehensive in its consideration of current and envisioned communication, navigation and surveillance (CNS) components, and will allow evaluation of critical air and ground traffic management technologies from an overall systems perspective. The FFSIM infrastructure is designed to incorporate all three major components of the ATM triad: aircraft flight decks, air traffic control (ATC), and (eventually) airline operational control (AOC) centers.

Miles, Eric S.↗

NASA NTRS1979

Cockpit displays of traffic information: Airline pilots opinions about content, symbology, and format

A number of candidate computer-generated cockpit displays of traffic information (CDTI) displays and display options were simulated statically and were shown to 23 airline pilots who were asked to respond to more than 250 questions about them. The pilots indicated that the amount and complexity of navigation information displayed should increase with altitude and map scale. Terrain information should appear automatically if a pilot's own aircraft descends below the minimum safe altitude and should include only those obstruction within 2,000 ft or less. Few pilots that weather information should be displayed on a CDTI, but if it was, it should be at pilot request only. A chevron-shaped symbol, located so that the majority of the map area was ahead was preferred. The position, altitude, ground speed, ground track, weight class, and flightpath history of other aircraft should be presented graphically by coding the shape of the symbol for other aircraft or presented digitally in data tags displayed at pilot request. All pilots thought that color coding was necessary to recognize different categories of information quickly and accurately. The majority of pilots felt that a CDTI would provide useful information even though its presence might increase their workload somewhat particularly during its introductory stages.

Hart, S. G.↗

NASA NTRS1980

Effectiveness of advanced fuel-conservative procedures in the transitional ATC environment

The real time simulation (involving both the pilot and the air traffic controller) of fuel conservative approaches, profile descents, and four dimensional area navigation to assess the effectiveness of the procedures is discussed. Generally, results indicate some difficulties with the procedures tested in a mixed traffic environment and point to the need for computer assistance for effective implementation of candidate procedures.

Tobias, L.↗