Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “total variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Measurements of the total column amount of NO2 at Kislovodsk Observatory in 1979 - 1990

The results of the measurements of the NO2 total content at the 'Kislovodsk' observatory (North Caucasus 2070 m a.s.l.) in 1979-1990 are presented. The measurements were based on the absorption of the direct sunlight in the visible region of the spectrum. The variation of the NO2 content from the morning to the evening and the seasonal and year to year variations are analyzed. The less amplitude of the daily variations of the NO2 total content in comparison with the variations of the stratospheric NO2 content says about the significant insert of the tropospheric and lower stratospheric NO2 in its total content. The year to year variations of NO2 and ozone are in antiphase. Their values depends on the regional features of the atmospheric circulation. The quasibiennial oscillations of the total NO2 content are picked out.

Elansky, Nikolay F.↗
NASA NTRS1981

Dissipation due to obliquity-induced tides in a Kelvin-Voigt viscoelastic body

A calculation is conducted regarding the local and total dissipation rate of mechanical energy for an incompressible, Kelvin-Voigt body in a circular orbit with finite obliquity. The considered material is characterized by a shear modulus and a viscosity. Of the two parameters, only the shear modulus is known. An investigation is conducted regarding the variation of the total dissipation rate with viscosity. For small values of the viscosity the Kelvin-Voigt material approximates the behavior of an elastic solid. In this range, results for the earth-moon system are similar to those obtained by Peale and Cassen (1978) using a modified form of the elastic solution. For large values of the viscosity the results are qualitatively different from those in the 'elastic' range, as viscous effects dominate the material response.

Vanarsdale, W. E.↗
DOE OSTI2023

On the convexity of phase-field fracture formulations: Analytical study and comparison of various degradation functions

Efficient and accurate fracture modeling is of great importance in applications where catastrophic outcomes under extreme scenarios are possible. The phase-field (PF) approach to fracture received significant attention over the past decade, due to its capability to capture complicated fracture patterns (e.g., crack merging and branching). Specifically, crack initiation and propagation are modeled via minimization of the total energy functional, which is regularized with the aid of a phase field. Despite the promising results and modeling capabilities of the PF method in many applications, the solution of fracture problems remains computationally challenging mainly due to the non-convexity of the total energy functional with respect to the combined unknown (phase field and displacement) fields. Understanding the effects of their coupling on convexity is crucial in order to address frequently encountered hurdles in fracture modeling (e.g., inefficient solvers and non-physical crack nucleation). In this paper, we develop convexity criteria for a wide class of PF fracture formulations. For this class of formulations, the second variation of the total energy functional is expressed in terms of Hessian matrices (evaluated at individual material points). Depending on the choice of geometric crack functions and degradation functions, we classify the formulations into three categories and analytically study each one separately. To study the sign of the second variation, we derive inequalities which are satisfied at material points when the Hessian matrix is locally positive semi-definite. These inequalities provide objective criteria for comparing degradation functions. Finally, the applicability of the proposed convexity criteria is demonstrated in the context of a one-dimensional problem, solved using a conventional monolithic solver.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1984

Temporal Variations of Solar UV Spectral Irradiance Caused by Solar Rotation and Active Region Evolution

Variations in the solar 100 to 400 nm UV spectral irradiance caused by solar rotation and active region evolution, are discussed as a function of UV wavelength, CMD dependence, and in relation to the temporal variations in the total solar irradiance, 10.7 cm radio flux, sunspot number and Ca K plage data. Active region radiation at cm wavelengths includes a component proportional to the magnetic field. Active region evolution involves a more rapid growth, peak and decay of sunspots and their strong magnetic fields than the Ca K plages and their related UV enhancements. Major plages often last a rotation or more longer than the active region's sunspots. Large active regions, including those associated with major dips in the total solar irradiance, tend to produce the strongest peaks in 10.7 cm and sunspot numbers on their first rotation, while the Ca K plages and UV enhancements peak on the next rotation and decay more slowly on subsequent rotations. Differences in CMD dependencies cause temporal differences including the stronger presence of 13 day variations in the UV flux.

Donnelly, R. F.↗
NASA NTRS2016

Remotely Sensed Northern Vegetation Response to Changing Climate: Growing Season and Productivity Perspective

Vegetation growing season and maximum photosynthetic state determine spatiotemporal variability of seasonal total gross primary productivity of vegetation. Recent warming induced impacts accelerate shifts on growing season and physiological status over Northern vegetated land. Thus, understanding and quantifying these changes are very important. Here, we first investigate how vegetation growing season and maximum photosynthesis state are evolved and how such components contribute on inter-annual variation of seasonal total gross primary productivity. Furthermore, seasonally different response of northern vegetation to changing temperature and water availability is also investigated. We utilized both long-term remotely sensed data to extract larger scale growing season metrics (growing season start, end and duration) and productivity (i.e., growing season summed vegetation index, GSSVI) for answering these questions. We find that regionally diverged growing season shift and maximum photosynthetic state contribute differently characterized productivity inter-annual variability and trend. Also seasonally different response of vegetation gives different view of spatially varying interaction between vegetation and climate. These results highlight spatially and temporally varying vegetation dynamics and are reflective of biome-specific responses of northern vegetation to changing climate.

Climate↗
NASA NTRS2013

Surface Freshwater Storage and Variability in the Amazon Basin from Multi-Satellite Observations, 1993-2007

The amount of water stored and moving through the surface water bodies of large river basins (river, floodplains, wetlands) plays a major role in the global water and biochemical cycles and is a critical parameter for water resources management. However, the spatio-temporal variations of these freshwater reservoirs are still widely unknown at the global scale. Here, we propose a hypsographic curve approach to estimate surface freshwater storage variations over the Amazon basin combining surface water extent from a multi-satellite-technique with topographic data from the Global Digital Elevation Model (GDEM) from Advance Spaceborne Thermal Emission and Reflection Radiometer (ASTER). Monthly surface water storage variations for 1993-2007 are presented, showing a strong seasonal and interannual variability, and are evaluated against in situ river discharge and precipitation. The basin-scale mean annual amplitude of approx. 1200 cu km is in the range of previous estimates and contributes to about half of the Gravity Recovery And Climate Experiment (GRACE) total water storage variations. For the first time, we map the surface water volume anomaly during the extreme droughts of 1997 (October-November) and 2005 (September-October) and found that during these dry events the water stored in the river and flood-plains of the Amazon basin was, respectively, approx. 230 (approx. 40%) and 210 (approx. 50%) cu km below the 1993-2007 average. This new 15year data set of surface water volume represents an unprecedented source of information for future hydrological or climate modeling of the Amazon. It is also a first step toward the development of such database at the global scale.

Storage↗
NASA NTRS1988

Analysis of sea ice dynamics

The ongoing work has established the basis for using multiyear sea ice concentrations from SMMR passive microwave for studies of largescale advection and convergence/divergence of the Arctic sea ice pack. Comparisons were made with numerical model simulations and buoy data showing qualitative agreement on daily to interannual time scales. Analysis of the 7-year SMMR data set shows significant interannual variations in the total area of multiyear ice. The scientific objective is to investigate the dynamics, mass balance, and interannual variability of the Arctic sea ice pack. The research emphasizes the direct application of sea ice parameters derived from passive microwave data (SMMR and SSMI) and collaborative studies using a sea ice dynamics model. The possible causes of observed interannual variations in the multiyear ice area are being examined. The relative effects of variations in the large scale advection and convergence/divergence within the ice pack on a regional and seasonal basis are investigated. The effects of anomolous atmospheric forcings are being examined, including the long-lived effects of synoptic events and monthly variations in the mean geostrophic winds. Estimates to be made will include the amount of new ice production within the ice pack during winter and the amount of ice exported from the pack.

Zwally, J.↗
DOE OSTI2022

An influence of manufacturing tolerances on Pin-Cell k-infinity of MOX fuel using data from the FUBILA experiment program

An influence of manufacturing tolerances (MTs) was evaluated on the pin-cell k-infinity of MOX fuel through the random sampling of CASMO5 calculations. The data from the FUBILA experiment program was used as the manufacturing parameters. For the uncertainties of element/isotope mass fractions, their covariance matrices were calculated by the generalized least square method. The total k-infinity uncertainty was 120-250 pcm (percent mille). From the breakdown of k-infinity uncertainty per materials, the MTs of fuel pellet had a dominant influence. The individual influences were also evaluated for element/isotope mass fractions, an inner/outer diameter, and a density. Those of element/isotope mass fractions were less than a few dozen pcm. Since the perturbations of fuel pellet diameter and density caused large variations to the total amount of heavy metals and effect of spatial self-shielding, they had a negative correlation with the k-infinity perturbation. On the AG3 (Al-Mg alloy) over-cladding, the inner/outer diameter perturbations had both negative and positive correlations. The negative one was due to decrease in amount of light water and the positive one was due to increase in amount of AG3. Since the effect of neutron slowing-down by light water had a dominant influence, the influence of the former negative correlation was larger than that of the latter positive correlation. It is, therefore, concluded that the consideration of the MTs that had a large influence on the effect of neutron slowing-down is important for precise quantification of the pin-cell k-infinity uncertainty of MOX fuel. (author)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1953

Investigation at supersonic speeds of the variation with Reynolds number and Mach number of the total, base, and skin-friction drag of seven boattail bodies of revolution designed for minimum wave drag

An investigation has been conducted in the Langley 9-inch supersonic tunnel to determine the effect of the variation with Reynolds number and Mach number of the total, base, and skin-friction drag at zero lift of seven boattail bodies of revolution designed for minimum wave drag according to NACA TN 2550. The tests covered a Reynolds number range from approximately 1.0 x 10(6) to 10.0 x 10(6) at Mach numbers of 1.62, 1.93, and 2.41, respectively. The results show that base drag and, in general, the total drag increase with increasing values of the ratio of base area to maximum area B/S(sub max), although the results reported in NACA TN 3054 showed that the wave drag decreased with increasing values of B/S(sub max). The laminar skin-friction drag is in agreement with the theoretical predictions used, and, within the Mach number range of these tests, the simple Blasius incompressible theory gives a satisfactory prediction. Except for values of B/S (sub max) near 1, the Reynolds number of transition increases with increasing Mach number and as this ratio approaches 1 this variation is seen to reverse. These variations in Reynolds number of transition with Mach number appear to be associated with the changes in pressure gradient over the rear of the bodies.

Bromm, August F , Jr↗
DOE OSTI2021

Flaring and Spot Activities on the Semi-detached Binary System KIC 06852488

The continuous and unbroken time-series photometry data of Kepler and the Transiting Exoplanet Survey Satellite (TESS) provide a good opportunity to study the continuous variations in the light curve of binary stars. This paper reports the discoveries of the correlation between the two maxima on the light curve of KIC 06852488 and the correlation between the O’Connell effect and the O – C curve. The Max I and Max II vary with a same cycle length of ~2000 days and a 180° phase difference, and the variation of the Max II coincides with the O – C curve of the primary light minima. After analyzing the Kepler and TESS light curves, it is detected that this binary is a semi-detached system with a mass ratio of 0.4622(±0.0036). The secondary component is filling its critical Roche lobe, while the primary component is only filling 12.25(±0.10)% of the lobe volume that contributes more than 85% luminosity of the total system. The variation of the O’Connell effect could be explained by an evolving hot spot on the primary component and an evolving cool spot on the secondary component. It is found that their positions are symmetrical with the inner Lagrange L1 point. After subtracting the binary brightness changes, six optical flares are detected that come from the cool secondary. We calculated the energy of flares and found that all of the flares are superflares. Both the flares and an evolving dark spot on the lobe-filling secondary component make the system a very interesting source to investigate the effects of binary interaction on the magnetic activities.

47 OTHER INSTRUMENTATION↗
NASA NTRS1977

The chemical evolution of molecular clouds

The nonequilibrium chemistry of dense molecular clouds (10,000 to 1 million hydrogen molecules per cu cm) is studied in the framework of a model that includes the latest published chemical data and most of the recent theoretical advances. In this model the only important external source of ionization is assumed to be high-energy cosmic-ray bombardment; standard charge-transfer reactions are taken into account as well as reactions that transfer charge from molecular ions to trace-metal atoms. Schemes are proposed for the synthesis of such species as NCO, HNCO, and CN. The role played by adsorption and condensation of molecules on the surface of dust grains is investigated, and effects on the chemical evolution of a dense molecular cloud are considered which result from varying the total density or the elemental abundances and from assuming negligible or severe condensation of gaseous species on dust grains. It is shown that the chemical-equilibrium time scale is given approximately by the depletion times of oxygen and nitrogen when the condensation efficiency is negligible; that this time scale is probably in the range from 1 to 4 million years, depending on the elemental composition and initial conditions in the cloud; and that this time scale is insensitive to variations in the total density.

Iglesias, E.↗
NASA NTRS1991

Interannual variations of ozone - Interpretation of 4 years of satellite observations of total ozone

Observations show that the monthly zonal mean total ozone between 1978 and 1982 varies by as much as 5 percent with respect to the 4-year average. These variations have been analyzed with the aid of a two-dimensional chemistry transport model. Observed temperatures and meridional stream functions, calculated from data, were used as inputs for the model. Deviations of the model-calculated total ozone from the 4-year mean were compared with the observed variations. It is shown that a substantial part of the observed variability of total ozone is reproduced by the model, despite uncertainties in the heating rates and without any special attempts to obtain consistent eddy diffusion or otherwise to tune the model. Results indicate that the temperature dependence of the ozone gas phase chemistry plays a negligible role in explaining the observed interannual variations in total ozone. A large part of the variability can be explained by the year-to-year differences in the transport circulation. The variability of the diabatic circulation is shown to be largely independent of the ozone fluctuations and to be a consequence of the observed temperature variations.

Schneider, Hans R.↗
NASA NTRS2012

Validation of Atmosphere/Ionosphere Signals Associated with Major Earthquakes by Multi-Instrument Space-Borne and Ground Observations

The latest catastrophic earthquake in Japan (March 2011) has renewed interest in the important question of the existence of pre-earthquake anomalous signals related to strong earthquakes. Recent studies have shown that there were precursory atmospheric/ionospheric signals observed in space associated with major earthquakes. The critical question, still widely debated in the scientific community, is whether such ionospheric/atmospheric signals systematically precede large earthquakes. To address this problem we have started to investigate anomalous ionospheric / atmospheric signals occurring prior to large earthquakes. We are studying the Earth's atmospheric electromagnetic environment by developing a multisensor model for monitoring the signals related to active tectonic faulting and earthquake processes. The integrated satellite and terrestrial framework (ISTF) is our method for validation and is based on a joint analysis of several physical and environmental parameters (thermal infrared radiation, electron concentration in the ionosphere, lineament analysis, radon/ion activities, air temperature and seismicity) that were found to be associated with earthquakes. A physical link between these parameters and earthquake processes has been provided by the recent version of Lithosphere-Atmosphere-Ionosphere Coupling (LAIC) model. Our experimental measurements have supported the new theoretical estimates of LAIC hypothesis for an increase in the surface latent heat flux, integrated variability of outgoing long wave radiation (OLR) and anomalous variations of the total electron content (TEC) registered over the epicenters. Some of the major earthquakes are accompanied by an intensification of gas migration to the surface, thermodynamic and hydrodynamic processes of transformation of latent heat into thermal energy and with vertical transport of charged aerosols in the lower atmosphere. These processes lead to the generation of external electric currents in specific regions of the atmosphere and the modifications, by dc electric fields, in the ionosphere-atmosphere electric circuit. We retrospectively analyzed temporal and spatial variations of four different physical parameters (gas/radon counting rate, lineaments change, long-wave radiation transitions and ionospheric electron density/plasma variations) characterizing the state of the lithosphere/atmosphere coupling several days before the onset of the earthquakes. Validation processes consist in two phases: A. Case studies for seven recent major earthquakes: Japan (M9.0, 2011), China (M7.9, 2008), Italy (M6.3, 2009), Samoa (M7, 2009), Haiti (M7.0, 2010) and, Chile (M8.8, 2010) and B. A continuous retrospective analysis was preformed over two different regions with high seismicity- Taiwan and Japan for 2003-2009. Satellite, ground surface, and troposphere data were obtained from Terra/ASTER, Aqua/AIRS, POES and ionospheric variations from DEMETER and COSMIC-I data. Radon and GPS/TEC were obtaining from monitoring sites in Taiwan, Japan and Italy and from global ionosphere maps (GIM) respectively. Our analysis of ground and satellite data during the occurrence of 7 global earthquakes has shown the presence of anomalies in the atmosphere. Our results for Tohoku M9.0 earthquake show that on March 7th, 2011 (4 days before the main shock and 1 day before the M7.2 foreshock of March 8, 2011) a rapid increase of emitted infrared radiation was observed by the satellite data and an anomaly was developed near the epicenter. The GPS/TEC data indicate an increase and variation in electron density reaching a maximum value on March 8. From March 3 to 11 a large increase in electron concentration was recorded at all four Japanese ground-based ionosondes, which returned to normal after the main earthquake. Similar approach for analyzing atmospheric and ionospheric parameters has been applied for China (M7.9, 2008), Italy (M6.3, 2009), Samoa (M7, 2009), Haiti (M7.0, 2010) and Chile (M8.8, 2010) eahquakes. Results have revealed the presence of related variations of these parameters implying their connection with the earthquake process. The second phase (B) of this validation included 102 major earthquakes (M>5.9) in Taiwan and Japan. We have found anomalous behavior before all of these events with no false negatives. False alarm ratio for false positives is less then 10% and has been calculated for the same month of the earthquake occurrence for the entire period of analysis (2003-2009). The commonalities for detecting atmospheric/ionospheric anomalies are: i.) Regularly appearance over regions of maximum stress (i.e., along plate boundaries); ii.) Anomaly existence over land and sea; and iii) association with M>5.9 earthquakes not deeper than 100km. Due to their long duration over the same region these anomalies are not consistent with a meteorological origin. Our initial results from the ISTF validation of multi-instrument space-borne and ground observations show a systematic appearance of atmospheric anomalies near the epicentral area, one to seven (average) days prior to the largest earthquakes, and suggest that it could be explained by a coupling process between the observed physical parameters and the pre-earthquake preparation processes.

Ouzounov, Dimitar↗
NASA NTRS1976

Cold-air annular-cascade investigation of aerodynamic performance of core-engine-cooled turbine vanes. 2: Pressure surface trailing edge ejection and split trailing edge ejection

The aerodynamic performance of two trailing edge ejection cooling configurations of a core-engine stator vane were experimentally determined in an ambient inlet-air full-annular cascade where three-dimensional effects could be obtained. The tests were conducted at the design mean-radius ideal aftermixed critical velocity ratio of 0.778. Overall vane aftermixed thermodynamic and primary efficiencies were obtained over a range of coolant flows to about 10 percent of the primary flow at a primary to coolant total temperature ratio of 1.0. The radial variation in efficiency and the circumferential and radial variations in vane-exit total pressure were determined. Comparisons are made with the solid (uncooled) vane.

Mclallin, K. L.↗
NASA NTRS1994

Microphysical modeling of cirrus. 2: Sensitivity studies

The one-dimensional cirrus model described in part 1 of this issue has been used to study the sensitivity of simulated cirrus microphysical and radiative properties to poorly known model parameters, poorly understood physical processes, and environmental conditions. Model parameters and physical processes investigated include nucleation rate, mode of nucleation (e.g., homogeneous freezing of aerosols and liquid droplets or heterogeneous deposition), ice crystal shape, and coagulation. These studies suggest that the leading sources of uncertainty in the model are the phase change (liquid-solid) energy barrier and the ice-water surface energy which dominate the homogeneous freezing nucleation rate and the coagulation sticking efficiency at low temperatures which controls the production of large ice crystals (radii greater than 100 mcirons). Environmental conditions considered in sensitivity tests were CN size distribution, vertical wind speed, and cloud height. We found that (unlike stratus clouds) variations in the total number of condensation nuclei (NC) have little effect on cirrus microphysical and radiative properties, since nucleation occurs only on the largest CN at the tail of the size distribution. The total number of ice crystals which nucleate has little or no relationship to the number of CN present and depends primarily on the temperature and the cooling rate. Stronger updrafts (more rapid cooling) generate higher ice number densities, ice water content, cloud optical depth, and net radiative forcing. Increasing the height of the clouds in the model leads to an increase in ice number density, a decrease in effective radius, and a decrease in ice water content. The most prominent effect of increasing cloud height was a rapid increase in the net cloud radiative forcing which can be attributed to the change in cloud temperature as well as change in cloud ice size distributions. It has long been recognized that changes in cloud height or cloud area have the greatest potential for causing feedbacks on climate change. Our results suggest that variations in vertical velocity or cloud microphysical changes associatd with cloud height changes may also be important.

Jensen, Eric J.↗
NASA NTRS2015

Modelling Freshwater Resources at the Global Scale: Challenges and Prospects

Quantification of spatially and temporally resolved water flows and water storage variations for all land areas of the globe is required to assess water resources, water scarcity and flood hazards, and to understand the Earth system. This quantification is done with the help of global hydrological models (GHMs). What are the challenges and prospects in the development and application of GHMs? Seven important challenges are presented. (1) Data scarcity makes quantification of human water use difficult even though significant progress has been achieved in the last decade. (2) Uncertainty of meteorological input data strongly affects model outputs. (3) The reaction of vegetation to changing climate and CO2 concentrations is uncertain and not taken into account in most GHMs that serve to estimate climate change impacts. (4) Reasons for discrepant responses of GHMs to changing climate have yet to be identified. (5) More accurate estimates of monthly time series of water availability and use are needed to provide good indicators of water scarcity. (6) Integration of gradient-based groundwater modelling into GHMs is necessary for a better simulation of groundwater-surface water interactions and capillary rise. (7) Detection and attribution of human interference with freshwater systems by using GHMs are constrained by data of insufficient quality but also GHM uncertainty itself. Regarding prospects for progress, we propose to decrease the uncertainty of GHM output by making better use of in situ and remotely sensed observations of output variables such as river discharge or total water storage variations by multi-criteria validation, calibration or data assimilation. Finally, we present an initiative that works towards the vision of hyper resolution global hydrological modelling where GHM outputs would be provided at a 1-km resolution with reasonable accuracy.

Global hydrological model↗
DOE OSTI2020

Leaf traits and canopy structure together explain canopy functional diversity: an airborne remote sensing approach

Plant functional diversity is strongly connected to photosynthetic carbon assimilation in terrestrial ecosystems. However, many of the plant functional traits that regulate photosynthetic capacity, including foliar nitrogen concentration and leaf mass per area, vary significantly between and within plant functional types and vertically through forest canopies, resulting in considerable landscape-scale heterogeneity in three dimensions. Hyperspectral imagery has been used extensively to quantify functional traits across a range of ecosystems but is generally limited to providing information for top-of-canopy leaves only. On the other hand, lidar data can be used to retrieve the vertical structure of forest canopies. Because these data are rarely collected at the same time, there are unanswered questions about the effect of forest structure on the 3-D spatial patterns of functional traits across ecosystems. In the United States, the National Ecological Observatory Network's Airborne Observation Platform (NEON AOP) provides an opportunity to address this structure-function relationship by collecting lidar and hyperspectral data together across a variety of ecoregions. With a fusion of hyperspectral and lidar data from the NEON AOP and field-collected foliar trait data, we assessed the impacts of forest structure on spatial patterns of N. In addition, we examine the influence of abiotic gradients and management regimes on top of canopy %N and total canopy N (i.e. the total amount of N (g/m 2 ) within a forest canopy) at a NEON site consisting of a mosaic of open longleaf pine and dense broadleaf deciduous forests. Here, our resulting maps suggest that in contrast with top-of-canopy values, total canopy N variation is dampened across this landscape resulting in relatively homogeneous spatial patterns. At the same time, we found that leaf functional diversity and canopy structural diversity showed distinct dendritic patterns related to the spatial distribution of plant functional types.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Mobilization of mercury from contaminated creekbank soils

The industrial use of mercury (Hg) led to the contamination of numerous watersheds worldwide, including the East Fork Poplar Creek (EFPC) in Tennessee, USA. Mercury can accumulate in creek banks and floodplain soils and is mobilized into downstream environments due to erosion from precipitation and flooding. Here, this study aimed to evaluate the geochemical conditions contributing to the release of Hg from contaminated soils in this watershed. Bank soil samples from the EFPC watershed with total Hg concentrations ranging from 27.2 to 1,425 mg·kg −1 were used in a series of batch experiments with artificial creek water at a solid-to-solution ratio of 1:30 to assess Hg release. Additional experiments examined Hg release across different soil size fractions and solid-to-solution ratios, as well as the effect of dissolved organic matter and time on Hg mobilization. Mercury release ranged from 0.011 to 0.17% of the total soil Hg and is correlated with total Hg concentrations. Variations in release among size fractions suggested heterogeneous distribution of labile Hg species. Results indicated two distinct solubility regimes depending on solid-to-solution ratios. Dissolved organic matter enhanced Hg release, and time-dependent experiments showed that changes in mercury speciation could decrease dissolved Hg concentrations over time. Identifying conditions that promote Hg mobilization from contaminated soils improves our understanding of Hg fluxes into downstream environments. Key factors influencing mercury release include soil characteristics, water chemistry, and temporal changes in mercury speciation.

54 ENVIRONMENTAL SCIENCES↗