Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “tin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Synthesizing photovoltaic thin films of high quality copper-zinc-tin alloy with at least one chalcogen species

A method for synthesizing a thin film of copper, zinc, tin, and a chalcogen species ("CZTCh" or "CZTSS") with well-controlled properties. The method includes depositing a thin film of precursor materials, e.g., approximately stoichiometric amounts of copper (Cu), zinc (Zn), tin (Sn), and a chalcogen species (Ch). The method then involves re-crystallizing and grain growth at higher temperatures, e.g., between about 725 and 925 degrees K, and annealing the precursor film at relatively lower temperatures, e.g., between 600 and 650 degrees K. The processing of the precursor film takes place in the presence of a quasi-equilibrium vapor, e.g., Sn and chalcogen species. The quasi-equilibrium vapor is used to maintain the precursor film in a quasi-equilibrium condition to reduce and even prevent decomposition of the CZTCh and is provided at a rate to balance desorption fluxes of Sn and chalcogens.

14 SOLAR ENERGY↗

Atomic layer epitaxy of hematite on indium tin oxide for application in solar energy conversion

A method to provide an article of manufacture of iron oxide on indium tin oxide for solar energy conversion. An atomic layer epitaxy method is used to deposit an uncommon bixbytite-phase iron (III) oxide (.beta.-Fe.sub.2O.sub.3) which is deposited at low temperatures to provide 99% phase pure .beta.-Fe.sub.2O.sub.3 thin films on indium tin oxide. Subsequent annealing produces pure .alpha.-Fe.sub.2O.sub.3 with well-defined epitaxy via a topotactic transition. These highly crystalline films in the ultra thin film limit enable high efficiency photoelectrochemical chemical water splitting.

14 SOLAR ENERGY↗

Integral Heat Transfer Test Method for Determining Thermal Resistance of Silicon Carbide Cladding and Liquid Tin System at Elevated Temperatures - Master's Thesis Presentation University of Idaho

Presentation for master's work at University of Idaho discussing Integral Heat Transfer Test Method for Determining Thermal Resistance of Silicon Carbide Cladding and Liquid Tin System at Elevated Temperatures. Presentation covers slight literature review results/previous work, discussions on system design and approach for thermal property measurement of SiC composite and Tin system, modeling efforts, and results.

36 - MATERIALS SCIENCE↗

Two-electron tin centers arising in glassy chalcogenides of arsenic due to nuclear reactions

Impurity {sup 119m}Sn atoms arising as a result of radioactive decay of parent {sup 119mm}Sn atoms in the structure of the glasses As{sub 2}S{sub 3}, As{sub 2}Se{sub 3}, and As{sub 2}Te{sub 3} are part of the glass composition in the form of structural units corresponding to tetravalent tin. The impurity {sup 119m}Sn atoms formed as a result of radioactive decay of {sup 119}Sb atoms in the structure of the As{sub 2}S{sub 3} and As{sub 2}Se{sub 3} glasses are localized at the arsenic sites and play the role of two-electron centers with a negative correlation energy. For the As{sub 2}Te{sub 3} glass, similarly formed {sup 119m}Sn atoms are electrically inactive. The greatest part of the daughter {sup 119m}Sn atoms arising after radioactive decay of parent {sup 119m}Te atoms are located at the chalcogen sites and are electrically inactive in the As{sub 2}S{sub 3}, As{sub 2}Se{sub 3}, and As{sub 2}Te{sub 3} glasses. A significant recoil energy of daughter atoms in the case of the {sup 119m}Te radioactive decay brings about the appearance of the {sup 119m}Sn displaced atoms.

36 MATERIALS SCIENCE↗

Tin impurity centers in glassy germanium chalcogenides

Tin atoms produced by radioactive decay of {sup 119mm}Sn and {sup 119}Sn impurity atoms in the structure of Ge{sub x}S{sub 1-x} and Ge{sub x}Se{sub 1-x} glasses are stabilized in the form of Sn{sup 2+} and Sn{sup 4+} ions and correspond to ionized states of the amphoteric two-electron center with negative correlation energy (Sn{sup 2+} is an ionized acceptor, and Sn{sup 4+} is an ionized donor), whereas the neutral state of the Sn{sup 3+} center appears to be unstable. {sup 119}Sn atoms produced by radioactive decay of {sup 119m}Te impurity atoms in the structure of Ge{sub x}S{sub 1-x} and Ge{sub x}Se{sub 1-x} glasses are stabilized at both chalcogen sites (they are electrically inactive) and germanium sites.

36 MATERIALS SCIENCE↗

The binary tin-rich lanthanum stannides La{sub 2}Sn{sub 5} and La{sub 3}Sn{sub 7}-A structural and bond theoretical study

The three tin-rich lanthanum stannides LaSn{sub 3}, La{sub 2}Sn{sub 5} and La{sub 3}Sn{sub 7}, which were known only from indexed powder diagrams, have been synthesized from melts of the elements by slow cooling of sealed sample tubes or arc melting and quenching. Their crystal structures were refined from X-ray powder diffractometer data using the Rietveld method. LaSn{sub 3} (cubic, space group Pm3-bar m, a=477.77(1) pm, Z=1, R{sub F}{sup 2}=0.044) crystallizes with the common Cu{sub 3}Au structure type, which can be described either as an ordered close packing or as a network of [Sn{sub 6}] octahedra (closo clusters) connected via common vertices. The structures of La{sub 2}Sn{sub 5} (Ce{sub 2}Sn{sub 5} structure type, orthorhombic, space group Cmmm, a=463.85(3), b=3581.3(3), c=469.83(4) pm, Z=4, R{sub F}{sup 2}=0.075) and La{sub 3}Sn{sub 7} (Gd{sub 3}Sn{sub 7} structure type, orthorhombic, space group Cmmm, a=457.83(4), b=2628.40(2), c=467.99(4) pm, Z=2, R{sub F}{sup 2}=0.068), which retain some similarities to ordered close packings as well, show 2D blocks of corner-sharing [Sn{sub 6}] octahedra terminated by [Sn{sub 5}] square pyramids (nido clusters). In between these layers, isolated Sn zigzag chains similar to those observed in LaSn (CrB structure type) are interspersed. A simple v.e. count after Zintl and Wade/Jemmis for the polyanionic Sn building blocks resulting from these structure descriptions fits the observed v.e. numbers of the three compounds almost exactly. It is also possible to explain the minima of the tDOS close to E{sub F}, which have been calculated within the framework of the FP-LAPW DFT approach. However, the simple assumption of an exclusively Sn-p bonded polyanion would neglect the large Sn-La bonding contributions and the reduced amount of electron transfer from La to Sn when compared to related alkaline earth stannides. - Graphical Abstract: La{sub 2}Sn{sub 5} and La{sub 3}Sn{sub 7}, stacking variants of LaSn{sub 3} (Cu{sub 3}Au type, closo clusters) and LaSn (CrB type, zig-zag chains) Highlights: > Preparation of binary La stannides LaSn{sub 3}, La{sub 2}Sn{sub 5} and La{sub 3}Sn{sub 7}. > La{sub 2}Sn{sub 5} and La{sub 3}Sn{sub 7} do not appear in published phase diagrams. > Full pattern Rietveld refinements of the crystal structures of all compounds. > Revised description of the structure types emphasizes polyanionic Sn framework. > Structural motifs rationalized through DFT calculations and Zintl and Wade rules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxygen exchange on nanocrystalline tin dioxide modified by palladium

Temperature-programmed oxygen isotopic exchange study was performed on nanocrystalline tin dioxide-based materials synthesized via sol-gel route and modified by palladium. Such materials are widely used as resistive gas sensors. The experiments were carried out in a flow-reactor up to complete isotopic substitution of oxygen. Substantial rates of isotopic exchange for SnO{sub 2} were observed from about 700 K. The distribution of isotopic molecules {sup 16}O{sub 2}, {sup 16}O{sup 18}O and {sup 18}O{sub 2} corresponds to simple dioxygen heteroexchange mechanism with single lattice oxygen atom. The modification of SnO{sub 2} by Pd introduced multiple heteroexchange mechanism with preliminary O{sub 2} dissociation on the clusters surface. Spill-over of atomic oxygen from Pd to the surface of SnO{sub 2} and fast exchange with lattice oxygen result in more than 100% increase of apparent heteroexchange rate. The exchange on SnO{sub 2}/Pd was shown to be a complex process involving partial deactivation of the catalytic centers at temperature higher than 750 K. - Graphical abstract: Nanocrystalline SnO{sub 2} modification by Pd essentially influences the interaction with gas phase molecules. A temperature programmed isotopic exchange study revealed that Pd promotes oxygen exchange of the material by facilitating oxygen dissociation and spill-over on the surface of active clusters. Highlights: Black-Right-Pointing-Pointer Nanocrystalline SnO{sub 2} can exchange up to 100% of constituent oxygen with gas phase. Black-Right-Pointing-Pointer Simple heteroexchange mechanism dominates for blank SnO{sub 2} interaction with oxygen. Black-Right-Pointing-Pointer Pd clusters on SnO{sub 2} surface enhance oxygen exchange rate. Black-Right-Pointing-Pointer Catalytic effect of Pd is due to O{sub 2} dissociation and spill-over on active clusters. Black-Right-Pointing-Pointer Partial Pd deactivation occurs at elevated temperature due to morphology changes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlled growth, characterization and thermodynamic behavior of bismuth–tin nanostructures sheathed in carbon nanotubes

We report the controlled synthesis of bismuth–tin (Bi–Sn) nanostructures sheathed in graphitic shells that resemble carbon nanotubes (CNTs). Our approach is based on a simple catalytic chemical vapor deposition over a mixture of Bi{sub 2}O{sub 3} and SnO{sub 2} supplied as starting materials. Shape control of the nanostructures strongly relies on the weight ratio of Bi{sub 2}O{sub 3} and SnO{sub 2}. Sheathed nanoparticles and nanorods are formed at SnO{sub 2} to Bi{sub 2}O{sub 3} weight ratios of less than 4:1. They are composed of two separate crystals: rhombohedral Bi and tetragonal Sn{sub 19}Bi crystals. On the other hand, the sheathed nanowires are formed at SnO{sub 2} to Bi{sub 2}O{sub 3} weight ratios above 4:1. The nanowires have only tetragonal Sn{sub 19}Bi structure with a diameter of approximately 100 nm. Elementary analyses support the core/shell heterostructure of the resulting products. A favorable temperature for the Sn-rich Sn{sub 19}Bi nanowires is in the range of 700–800 °C, more specifically around 750 °C. Thermodynamic analysis reveals that the CNTs play a significant role in the protection of the Bi–Sn nanostructures during phase transition by temperature change. This simple and reproducible method may be extended to the fabrication of similar binary or ternary nanostructures. - Highlights: • Controlled growth of Bi–Sn nanostructures sheathed in CNTs relies on MSnO{sub 2}/MBi{sub 2}O{sub 3}. • Growth mechanism is based on catalytic reaction of C{sub 2}H{sub 2} over an oxide mixture. • Nanoparticles and nanorods consist of rhombohedral Bi and tetragonal Sn{sub 19}Bi. • A favorable temperature for the Sn{sub 19}Bi nanowires is in the range of 700–800 °C. • CNT acts as a protective barrier during phase change of the Bi–Sn nanostructures.

36 MATERIALS SCIENCE↗

PALLADIUM DOPED TIN OXIDE BASED HYDROGEN GAS SENSORS FOR SAFETY APPLICATIONS

Hydrogen is considered to be a hazardous gas since it forms a flammable mixture between 4 to 75% by volume in air. Hence, the safety aspects of handling hydrogen are quite important. For this, ideally, highly selective, fast response, small size, hydrogen sensors are needed. Although sensors based on different technologies may be used, thin-film sensors based on palladium (Pd) are preferred due to their compactness and fast response. They detect hydrogen by monitoring the changes to the electrical, mechanical or optical properties of the films. We report the development of Pd-doped tin-oxide based gas sensors prepared on thin ceramic substrates with screen printed platinum (Pt) contacts and integrated nicrome wire heaters. The sensors are tested for their performances using hydrogen-nitrogen gas mixtures to a maximum of 4%H{sub 2} in N{sub 2}. The sensors detect hydrogen and their response times are less than a few seconds. Also, the sensor performance is not altered by the presence of helium in the test gas mixtures. By the above desired performance characteristics, field trials of these sensors have been undertaken. The paper presents the details of the sensor fabrication, electronic circuits, experimental setup for evaluation and the test results.

36 MATERIALS SCIENCE↗

Formation and evolution of self-organized Au nanorings on indium-tin-oxide surface

This work reports on the formation of Au nanoclusters and on their evolution in nanoring structures on indium-tin-oxide surface by sputtering deposition and annealing processes. The quantification of the characteristics of the nanorings (surface density, depth, height, and width) is performed by atomic force microscopy. The possibility to control these characteristics by tuning annealing temperature and time is demonstrated establishing relations which allow to set the process parameters to obtain nanostructures of desired morphological properties for various technological applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The crystallinity and mechanical properties of indium tin oxide coatings on polymer substrates

We present the relationship between the microstructure and mechanical strength of indium tin oxide (ITO) on flexible substrates. With varying thickness (h{sub f}), ITO is deposited on polyethylene terephthalate (PET) by dc magnetron sputtering. The microstructure of ITO is controlled by substrate surface conditions and sputtering parameters. The maximum substrate temperature during deposition is limited to 80 deg. C due to the low glass transition temperature (T{sub g}) of PET. The crystallinity and surface roughness (R{sub rms}) are analyzed by high resolution x-ray diffraction, high resolution transmission electron microscopy, and AFM. The crack resistance of ITO is evaluated by uniaxial tension test. The experimental results reveal that, at a fixed h{sub f}, the degree and quality of crystallinity of ITO are highly improved by increasing sputtering power and the substrate temperature. As the crystallinity is improved, the ratio of preferred growth orientations of (222) to (400) is increased and the degree of peak shifts to lower 2{theta} is decreased. They indicate that the crystallinity is improved as the lattice damage is reduced and film density is increased. The tension test results confirm that, up to a certain h{sub f}, the strength of ITO can be significantly enhanced by improving the microstructures.

36 MATERIALS SCIENCE↗

Nitrogen plasma treatment of fluorine-doped tin oxide for enhancement of photo-carrier collection in amorphous Si solar cells

Nitrogen plasma treatment was performed on fluorine-doped tin oxide (SnO{sub 2}:F) front electrodes, and its impact on the performance of pin type amorphous Si (a-Si) solar cells was investigated. Nitrogen plasma treatment reverses the surface band bending of SnO{sub 2}:F from accumulation to depletion, thus in turn reversing the band bending of the p type amorphous silicon carbide (p-a-SiC) window layer. The reversal of band bending leads to the collection of carriers generated in p-a-SiC, and quantum efficiency in the short wavelength regime is thereby enhanced. On the other hand, surface depletion of SnO{sub 2}:F causes a reduction of the diode built-in voltage and increased series resistance, which could degrade the open circuit voltage (Voc) and fill factor (FF), the degradation of which is strongly affected by the deposition time of p-a-SiC.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low Temperature, Self-nucleated Growth of Indium Tin Oxide Nanostructures by Pulsed Laser Deposition in Argon

Indium tin oxide (ITO) nanostructures were successfully deposited on glass substrate by pulsed laser ablation in argon gas at 250 deg. C. Microstructural changes were observed in the argon gas pressure between 30 to 50 mTorr. The as-grown, nanostructured ITO exhibit In{sub 2}O{sub 3} bixbyite structure orientated at <111> direction. At the initial stage of growth, there was a large number of nucleation sites detected which eventually evolved into needle-like branches. The presence of spheres at the tip of these branches indicates that these nanostructured ITO were likely governed by vapor-liquid-solid (VLS) growth mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The influence of the SiO{sub 2} interlayer on transfer characteristic in tin oxide thin film transistor

In this article, we report the fabrication on SnO{sub 2} thin film transistors (TFTs) fabricated by DC sputtering system. SnO{sub 2} based TFTs have been reported previously, and all the TFTs operate depletion-mode, requiring the application of a gate voltage to turn it off. In contrast to previously reports, the SnO{sub 2} TFT reported herein operates as an enhancement-mode device, requiring the application of a gate voltage to turn the device on. Furthermore, we introduce an hafnium-tin oxide (HfSnO) semiconductor materials that have been developed for use as p-channel TFTs.

36 MATERIALS SCIENCE↗

(n,{gamma}) Experiments on tin isotopes

Neutron capture experiments on highly enriched {sup 117,119}Sn isotopes were performed with the DANCE detector array located at the Los Alamos Neutron Science Center. The DANCE detector provides detailed information about the multi-step {gamma}-ray cascade following neutron capture. Analysis of the experimental data provides important information to improve understanding of the neutron capture reaction, including a test of the statistical model, the assignment of spins and parities of neutron resonances, and information concerning the Photon Strength Function (PSF) and Level Density (LD) below the neutron separation energy. Preliminary results for the (n,{gamma}) reaction on {sup 117,119}Sn are presented. Resonance spins of the odd-A tin isotopes were almost completely unknown. Resonance spins and parities have been assigned via analysis of the multi-step {gamma}-ray spectra and directional correlations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Suppression of tin precipitation in SiSn alloy layers by implanted carbon

By combining transmission electron microscopy and Rutherford backscattering spectrometry, we have identified carbon related suppression of dislocations and tin precipitation in supersaturated molecular-beam epitaxial grown SiSn alloy layers. Secondary ion mass spectrometry has exposed the accumulation of carbon in the SiSn layers after high temperature carbon implantation and high temperature thermal treatment. Strain-enhanced separation of point defects and formation of dopant-defect complexes are suggested to be responsible for the effects. The possibility for carbon assisted segregation-free high temperature growth of heteroepitaxial SiSn/Si and GeSn/Si structures is argued.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Light emission from silicon with tin-containing nanocrystals

Tin-containing nanocrystals, embedded in silicon, have been fabricated by growing an epitaxial layer of Si{sub 1−x−y}Sn{sub x}C{sub y}, where x = 1.6 % and y = 0.04 % on a silicon substrate, followed by annealing at various temperatures ranging from 650 {sup ∘}C to 900 {sup ∘}C. The nanocrystal density and average diameters are determined by scanning transmission-electron microscopy to ≈10{sup 17} cm{sup −3} and ≈5 nm, respectively. Photoluminescence spectroscopy demonstrates that the light emission is very pronounced for samples annealed at 725 {sup ∘}C, and Rutherford back-scattering spectrometry shows that the nanocrystals are predominantly in the diamond-structured phase at this particular annealing temperature. The origin of the light emission is discussed.

36 MATERIALS SCIENCE↗

Etching of germanium-tin using ammonia peroxide mixture

The wet etching of germanium-tin (Ge{sub 1-x}Sn{sub x}) alloys (4.2% < x < 16.0%) in ammonia peroxide mixture (APM) is investigated. Empirical fitting of the data points indicates that the etch depth of Ge{sub 1-x}Sn{sub x} is proportional to the square root of the etch time t and decreases exponentially with increasing x for a given t. In addition, X-ray photoelectron spectroscopy results show that increasing t increases the intensity of the Sn oxide peak, whereas no obvious change is observed for the Ge oxide peak. This indicates that an accumulation of Sn oxide on the Ge{sub 1-x}Sn{sub x} surface decreases the amount of Ge atoms exposed to the etchant, which accounts for the decrease in etch rate with increasing etch time. Atomic force microscopy was used to examine the surface morphologies of the Ge{sub 0.918}Sn{sub 0.082} samples. Both root-mean-square roughness and undulation periods of the Ge{sub 1-x}Sn{sub x} surface were observed to increase with increasing t. This work provides further understanding of the wet etching of Ge{sub 1-x}Sn{sub x} using APM and may be used for the fabrication of Ge{sub 1-x}Sn{sub x}-based electronic and photonic devices.

36 MATERIALS SCIENCE↗