Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “test data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

A comparison of two methods of extracting stability derivatives from flight test data

Two methods for extracting stability derivatives from flight data are compared. A modified Newton-Raphson quasilinearization minimization technique and a digital-analog (hybrid) matching technique were used to analyze the same data maneuvers obtained from two aircraft. About 70 maneuvers from an F-111E aircraft were analyzed over a Mach number range of 0.3 to 2.0 and an angle of attack range of 3 to 19 degrees. About 20 maneuvers were analyzed for the X-24A lifting body at Mach numbers of 0.5, 0.8, and 0.9, and an angle of attack range of 4 to 13 degrees. Stability derivatives were extracted from these maneuvers and the results from the two techniques, along with wind tunnel results, were compared.

Kirsten, P. W.↗
NASA NTRS1974

Identification of structural parameters from helicopter dynamic test data

A method is presented for obtaining the mass, stiffness, and damping parameters of a linear mathematical model, having fewer degrees of freedom than the structure it represents, directly from dynamic response measurements on the actual helicopter without a priori knowledge of the physical characteristics of the fuselage. The only input information required in the formulation is the approximate natural frequency of each mode and mobility data measured proximate to these frequencies with sinusoidal force excitation applied at only one point on the vehicle. The practicality and numerical soundness of the theoretical development was demonstrated through a computer simulation of an experimental program.

Giansante, N.↗
NASA NTRS1974

Omega flight-test data reduction sequence

Computer programs for Omega data conversion, summary, and preparation for distribution are presented. Program logic and sample data formats are included, along with operational instructions for each program. Flight data (or data collected in flight format in the laboratory) is provided by the Ohio University Omega receiver base in the form of 6-bit binary words representing the phase of an Omega station with respect to the receiver's local clock. All eight Omega stations are measured in each 10-second Omega time frame. In addition, an event-marker bit and a time-slot D synchronizing bit are recorded. Program FDCON is used to remove data from the flight recorder tape and place it on data-processing cards for later use. Program FDSUM provides for computer plotting of selected LOP's, for single-station phase plots, and for printout of basic signal statistics for each Omega channel. Mean phase and standard deviation are printed, along with data from which a phase distribution can be plotted for each Omega station. Program DACOP simply copies the Omega data deck a controlled number of times, for distribution to users.

Lilley, R. W.↗
NASA NTRS1975

Analysis of wake vortex flight test data behind a T-33 aircraft

Measurements of the vortex system behind a T-33 aircraft were obtained by a Learjet equipped with a boom carrying a three-wire, hot-wire anemometry probe and other instrumentation. Analysis of the measurements using a computerized geometric method indicated the vortices had a core radius of approximately 0.11 meter with a maximum velocity of 25 meters per second. The hot-wire anemometer was found to be a practical and sensitive instrument for determining in-flight vortex velocities. No longitudinal instabilities, buoyant effects or vortex breakdowns were evident in the data which included vortex wake cross sections from 0.24 to 5.22 kilometers behind the T-33.

Kuhn, G. D.↗
NASA NTRS1975

Rotorcraft derivative identification from analytical models and flight test data

A general procedure is presented for systematic development of rotorcraft models for use in systems identification, which includes fuselage and rotor degrees of freedom (DOF). Formulations for rigid blade flap and lag as well as the normal mode representation of an elastic blade are developed for hingeless and articulated rotor systems. The method of multiblade coordinates is used to obtain linear constant coefficient state variable models of various levels of approximation. Two of the approximate models, a 6 DOF, are identified from a nonlinear articulated helicopter computer simulation. The results demonstrate the accuracy attainable for each model. Advanced results outline the status of rotorcraft modeling and systems identification and indicate areas that require further investigation.

Molusis, J. A.↗
NASA NTRS1978

Estimation of aerodynamic characteristics from dynamic flight test data

Significant effort was spent in estimating unknown aircraft coefficients, such as stability and control derivatives from dynamic flight maneuvers. The techniques used to estimate these coefficients are becoming increasingly complex; however, these techniques make it possible to obtain estimates of coefficients that in the past were nearly impossible to obtain. A survey of the investigations that were undertaken to obtain estimates of coefficients from dynamic flight maneuvers is presented. One method, the maximum likelihood estimation technique, is described briefly and some of the successful applications of the technique are presented. Possible techniques for analyzing responses obtained in the stall/spin regime are discussed. Recent data obtained in the stall/spin flight regime are presented along with a discussion of how some basic results can be obtained with simple analysis techniques.

Liff, K. W.↗
NASA NTRS1979

Synthesis of rotor test data for real-time simulation

A mathematical model of a hingeless tilting rotor is presented. The model was obtained by a systematic curve fit procedure applied to an extensive set of model scale wind tunnel data. The math model equations were used in a real time flight simulation model of a hingeless tilt rotor XV-15 to assess changes in flying qualities compared to those obtained using a previous rotor model. Extensive plots of the rotor derivatives are given. Discussions of attempts to apply multivariable linear regression technqiues to the data and the use of an analytical rotor representation are included.

Mcveigh, M. A.↗
NASA NTRS1981

Analysis of JP-4 fire test data and development of a simple fire model

A series of field experiments involving JP-4 fires of 7.6m dia and 15.2m dia was conducted under the sponsorship of NASA. The temperature inside the fire, the specie composition and vertical axial velocity were measured at several height locations and radial positions. The peak temperature recorded is 1400-1500 K; the velocities at 6m height are 11-12 m/s. The oxygen-to-nitrogen mass ratio along the vertical axis was found to be nearly a constant at 0.05. Significant necking of the fire was observed. A simple theoretical model was developed that predicts the experimental data on the velocity and vertical temperature distribution well. The model is based on the partial combustion of entrained air and assumed top-hat distributions for various property and flow parameters inside the fire. Quantitative agreement is obtained by using a value of 0.15 for the entrainment coefficient and 0.45 for the mixing efficiency factor. The model also predicts the fire necking.

Raj, P. K.↗
NASA NTRS1982

Development of an automated processing and screening system for the space shuttle orbiter flight test data

One nemesis of the structural dynamist is the tedious task of reviewing large quantities of data. This data, obtained from various types of instrumentation, may be represented by oscillogram records, root-mean-squared (rms) time histories, power spectral densities, shock spectra, 1/3 octave band analyses, and various statistical distributions. In an attempt to reduce the laborious task of manually reviewing all of the space shuttle orbiter wideband frequency-modulated (FM) analog data, an automated processing system was developed to perform the screening process based upon predefined or predicted threshold criteria.

Mccutchen, D. K.↗