SEARCH · Engineering Papers

Results for “technology pathways”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

DOE OSTI2020

High-Temperature Heat Transfer Fluid Circulator for Concentrating Solar Power Systems

Concentrating Solar Power (CSP) plants with Thermal Energy Storage (TES), require compressors capable of circulating supercritical carbon dioxide (sCO2) heat transfer fluids (HTFs) at temperatures from 500 to 700+°C and pressures from 8 to 25 MPa (80 to 250 Bar or 1160 to 3626 psia) in order to achieve thermal-to-electric efficiencies >50%. A review of papers relating to SCO2 compressors reveals that in almost every case the conditions being considered either allow for cooling of the SCO2 working fluid or are considering operating conditions close to the critical point at a temperature and pressure of approximately 31°C and 1070 psi). While the technology reported in these papers is relevant to most turbomachinery, the current CSP gas pathway circulator operating pressures are well above the CO2 critical point and do not allow for cooling of the main HTF flow. The purpose of this paper was to describe the key system issues affecting the design of a HTF circulator that could be scaled from a small size research and proof of concept circulator compressor to sizes supporting power plants producint upwards of 100 to 300 Mega Watts of electrical power. Due to the high temperatures and pressures the research scale HTF circulator was designed to be hermetically sealed to prevent leakage of the super critical carbon dioxide to the environment. In order to achieve hermetic sealing the drive motor and centrifugal impeller were fully integrated in a single shaft system configuration. From a preliminary assessment of compression power as a function of operating speed and impeller diameter it was determined that a smaller, higher speed impeller would result in a more efficient circulator. However, due to the high pressure and corresponding density of the sCO2 coupled with high operating speeds, large windage losses (i.e., viscous drag on the high speed rotating shaft) would occur which could result in a substantial reduction in efficiency of the system. Therefore tradoff studies were complerted to identify the operating speeds and system component sizes to achieve high efficiency. Based on the trade studies, the final design was a 55 mm diamter compressor impeller operating at speeds to 85,000 rpm. The unit will be built and tested in the future. Key Words: Super Critical Carbon Dioxide, Heat Transfer Fluid, Turbomachinery, Compressor, Circulator, Critical Point, Concentrating Solar Power, Solar Energy

Super Critical Carbon Dioxide, Heat Transfer Fluid↗

DOE OSTI2023

Downregulation of barley ferulate 5-hydroxylase dramatically alters straw lignin structure without impact on mechanical properties

Barley is a major cereal crop for temperate climates, and a diploid genetic model for polyploid wheat. Cereal straw biomass is an attractive source of feedstock for green technologies but lignin, a key determinant of feedstock recalcitrance, complicates bio-conversion processes. However, manipulating lignin content to improve the conversion process could negatively affect agronomic traits. An alternative approach is to manipulate lignin composition which influences the physical and chemical properties of straw. This study validates the function of a barley ferulate 5-hydroxylase gene and demonstrates that its downregulation using the RNA-interference approach substantially impacts lignin composition. We identified five barley genes having putative ferulate 5-hydroxylase activity. Downregulation of HvF5H1 substantially reduced the lignin syringyl/guaiacyl (S/G) ratio in straw while the lignin content, straw mechanical properties, plant growth habit, and grain characteristics all remained unaffected. Metabolic profiling revealed significant changes in the abundance of 173 features in the HvF5H1-RNAi lines. The drastic changes in the lignin polymer of transgenic lines highlight the plasticity of barley lignification processes and the associated potential for manipulating and improving lignocellulosic biomass as a feedstock for green technologies. On the other hand, our results highlight some differences between the lignin biosynthetic pathway in barley, a temperate climate grass, and the warm climate grass, rice, and underscore potential diversity in the lignin biosynthetic pathways in grasses.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2026

Assessing Geospatial and Seasonal Influences on Energy and Cost-Efficiency of Drayage Trucks

The electrification of heavy-duty vehicles is a critical pathway toward improved energy efficiency in the freight sector. The current battery electric truck technology poses several challenges to commercial vehicle operations, such as limited driving range, sensitivity to climate conditions, and long recharging times. Estimating the energy consumption of heavy-duty electric trucks is crucial to assessing the feasibility of fleet electrification and its impact on the electric grid. This article focuses on developing a model-based simulation approach to predict and analyze the energy consumption of electric trucks by considering the impact of weather and geographical conditions on vehicle road load and auxiliary components power consumption, as well as the impact these factors have on driving range. Specifically, drayage trucks employed in logistics around maritime ports are used as a case study, with consideration of seasonal climate variations and geographical characteristics at different locations. The article includes results for three major container ports within the United States, providing region-specific insights into the energy requirements and driving range of the electric drayage trucks in these regions, which will inform decision-makers in integrating electric trucks into the existing drayage operations and plan investments for electric grid development.

Sujan, Vivek [ORNL] (ORCID:0000000269882342)↗

DOE OSTI2026

Embedded Ferroelectric Nanoclusters can drive Polarization Reversal in a Non-Ferroelectric Polar Film via the Proximity Effect

Heterogeneous nucleation from defects dominates the electric field required for polarization switching of ferroelectrics. Here, we consider the switching of a nominally non-switchable polar thin film of AlN due to the proximity effect arising from embedded ferroelectric nanoclusters of Al 1-x Sc x N. Using a Landau-Ginzburg-Devonshire thermodynamic approach and finite element modeling, we study the influence of nanocluster shape on polarization switching and domain nucleation emerging in AlN. The ferroelectric nanocluster boundary is modeled as a thin layer transitioning from Al 1-x Sc x N to AlN. We analyze the conditions under which polarization switching in the AlN film occurs at coercive fields significantly lower than its dielectric breakdown field. In the presence of spike-like Al 1-x Sc x N nanoclusters, the proximity effect enables switching of the spontaneous polarization in AlN and significantly reduces the corresponding coercive field. The internal field, which is depolarizing inside the AlN (due to its larger spontaneous polarization) and polarizing within the ferroelectric Al 1-x Sc x N nanoclusters (due to its smaller spontaneous polarization), lowers the potential barrier in the clusters and nucleates nanodomains at the Al 1-x Sc x N-AlN interface, forming localized regions of reversed polarization. Proximity effect can thus provide a pathway towards "thawing" previously "frozen" ferroelectrics through engineered nucleation for memory, actuation and optical technologies.

36 MATERIALS SCIENCE↗

DOE OSTI2021

BETO 2021 Peer Review - WBS 4.1.2.32: Bioeconomy Scenario Analysis

The Bioeconomy Scenario Analysis project uses systems thinking and analysis to assess current and/or prospective techno-economics, research and development, deployment strategies, policy, and market conditions and their impact on the potential development trajectories of the bioenergy industry over time. Results from this project include identification of opportunities and constraints to industrial development, quantification of multiple metrics (energy, economic, environmental) and informing researchers, decision makers, and industry of the steps needed for a sustainable, nationwide biofuels industry. Analyses from this project enable the creation of a bioenergy industry by (1) inciting policy-makers to explore scenarios for nationwide biofuels production, identifying policy actions consistent with pathways for growth; (2) improving industry’s understanding of industry growth potential under different technology and investment conditions, better targeting their development efforts; and (3) providing universities and other interested stakeholders with tools and analyses that can be adapted to meet research and teaching objectives, connecting students with careers that build the industry. One of the many modeling tools used in this project, the Biomass Scenario Model (BSM) is a publicly-available, unique, validated, state-of-the-art, award-winning, fourth-generation model of the domestic biofuels supply chain which explicitly focuses on how and under what conditions biofuel technologies might be deployed to contribute to the U.S. transportation energy sector. We use models like the BSM to examine the implications of policies and incentives as well as their potential side-effects. The BSM uses a system-dynamics simulation to model dynamic interactions and transitions across the supply chain; it tracks the deployment of biofuels given industrial learning and the reaction of the investment community in the context of land availability, projected oil markets, consumer demand for biofuels, and government policies over time. Under expected market conditions, analyses using the BSM suggest that the biofuels industry may require significant external actions in the early years to thrive. Interventions that accelerate the industrial learning process (e.g. operation of pre-commercial and commercial facilities) have been identified as having strong influence in starting the growth of a commercial biofuel industry. Policies which are coordinated across the whole supply chain in BSM foster the growth of the biofuels industry and production of tens of billions of gallons of biofuels may occur under sufficiently favorable conditions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2023

Integrated Operations for Nuclear: Work Reduction Opportunity Demonstration Strategy

EXECUTIVE SUMMARY The Light Water Reactor Sustainability Program Plant Modernization Pathway has been working with industry for a number of years to leverage digital technology to extend the life and improve the performance of the existing fleet through modernized technologies and improved processes for plant operation and power generation. This includes development of modernization solutions to improve reliability and economic performance while addressing US nuclear industry’s aging and obsolescence challenges. The objective of these efforts is to deliver a sustainable business model that enables US nuclear industry to remain competitive. Digital Infrastructure (DI) research has established a technical foundation for these efforts. This effort began with technical analysis and support for a safety-related instrumentation and control (I&C) pilot upgrade being performed at Constellation Energy Generation’s Limerick Nuclear Plant. The following publicly available reports were produced as part of this effort. • INL/EXT-20-61079, Vendor-Independent Design Requirements for a Boiling Water Reactor Safety System Upgrade [1] • INL/EXT-20-59371, Business Case Analysis for Digital Safety-Related Instrumentation & Control System Modernizations [2] • INL/EXT-20-59809, “Safety-Related Instrumentation and Control Pilot Upgrade: Initial Scoping Phase Implementation Report and Lessons Learned [3] • INL/RPT-23-72105, Safety-Related Instrumentation and Control Upgrade: Conceptual – Detailed Design Phase Report and Lessons Learned [4]

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2023

Enabling a Sustainable Future: Zero-Emission Vehicles Cost Analysis to Inform Decarbonization Pathways

Despite being only 5% of vehicles on the road, medium- and heavy-duty vehicles (MHDVs) are the second largest contributor to transportation emissions (21%) and a major source of local air pollution disproportionally affecting disadvantaged communities. This talk summarizes a cost analysis for zero emissions vehicles (battery electric EVs and hydrogen fuel cell FCEVs) for all medium and heavy duty applications, ranging from large pick-up trucks, to delivery vans, buses, and heavy trucks. Results show that with continued improvements in vehicle and fuel technologies (in line with U.S. Department of Energy targets and vetted with industry), zero-emission vehicles (ZEVs) can reach total-cost-of-driving parity with conventional diesel vehicles by 2035 for all medium- and heavy-duty (MD/HD) vehicle classes without incentives. Assuming economics drives adoption, ZEV sales could reach 42% of all MD/HD trucks by 2030, reflecting lower combined vehicle purchase and operating costs (using real-world payback periods). Two technological solutions - battery electric vehicles (BEVs) and fuel cell electric vehicles (FCEVs) - are viable in multiple market segments, offering alternative pathways for decarbonization: a) BEVs tend to become cost-competitive for smaller trucks before 2030 and for short-haul (<500-mile) heavy trucks before 2035. b) Hydrogen FCEVs tend to become cost-competitive for long-haul (>500-mile) heavy trucks by 2035. Results are very sensitive to technology improvement trajectories, adoption decision-making, and uncertain assumptions about future freight demand, logistics, and vehicle use explored in multiple scenarios.

ADVANCED PROPULSION SYSTEMS,ENERGY PLANNING, POLIC↗

DOE OSTI2023

Scaling Up CSP: How Long Will it Take?

Concentrating solar power (CSP) is one of the few scalable technologies capable of delivering dispatchable renewable power. Therefore, many expect it to shoulder a significant share of system balancing in a renewable electricity future powered by cheap, intermittent PV and wind power: the IEA, for example, projects 73 GW CSP by 2030 and several hundred GW by 2050 in its Net-Zero by 2050 pathway. In this paper, we assess how fast CSP can be expected to scale up and how long time it would take to get new, high-efficiency CSP technologies to market, based on observed trends and historical patterns. We find that to meaningfully contribute to net-zero pathways the CSP sector needs to reach and exceed the maximum historical annual growth rate of 30%/year last seen between 2010-2014 and maintain it for at least two decades. Any CSP deployment in the 2020s will rely mostly on mature existing technologies, namely parabolic trough and molten-salt towers, but likely with adapted business models such as hybrid CSP-PV stations, combining the advantages of higher-cost dispatchable and low-cost intermittent power. New third-generation CSP designs are unlikely to play a role in markets during the 2020s, as they are still at or before the pilot stage and, judging from past pilot-to-market cycles for CSP, they will likely not be ready for market deployment before 2030. CSP can contribute to low-cost zero-emission energy systems by 2050, but to make that happen, at the scale foreseen in current energy models, ambitious technology-specific policy support is necessary, as soon as possible and in several countries.

concentrated solar power↗

DOE OSTI2021

Identifying Pathways for Enhanced Collaboration Between the Mining and Geothermal Industries

The locatable mineral industry is shifting toward improving environmental performance and becoming more sustainable, with numerous mining companies shifting to renewable energy technologies to power mine operations and at least one company pledging net-zero emissions by 2050. One potential electricity source to help achieve improved environmental performance and decarbonization within the mining industry is geothermal energy. As part of a study into potential collaboration between the geothermal and locatable mineral industries (focused on the portion of the Basin and Range Province within Nevada), the National Renewable Energy Laboratory (NREL) with support from the U.S. Department of Energy (DOE) Geothermal Technologies Office (GTO), investigated data, economic, and regulatory factors that may contribute to or inhibit synergies between the two industries. The objectives of the study included analyzing: The type and quality of data collected by the locatable mineral industry to determine feasibility for geothermal resource exploration; The regulatory pathways and potential barriers that could prevent development of geothermal resources discovered via a mining claim (and vice versa); The historical development of geothermal resources discovered via mineral exploration data; The value propositions for both the locatable mineral and the geothermal industries to collaborate.

40 EE - Geothermal Technologies Office (EE-4G)↗

DOE OSTI2023

Reducing Fuel Consumption on a Heavy-Duty Nonroad Vehicle: Conventional Powertrain Modifications

This investigation focuses on conventional powertrain technologies that provide operational synergy based on customer utilization to reduce fuel consumption for a heavy-duty, nonroad (off-road) material handler. The vehicle of interest is a Pettibone Cary-Lift 204i, with a base weight of 50,000 lbs. and a lift capacity of 20,000 lbs. The conventional powertrain consists of a US Tier 4 Final diesel engine, a non-lockup torque converter, a four-speed powershift automatic transmission, and all-wheel drive. The paper will present a base vehicle energy/fuel consumption breakdown of propulsion, hydraulic and idle distribution based on a representative end-user drive cycle. The baseline vehicle test data was then used to develop a correlated lumped parameter model of the vehicle-powertrain-hydraulic system that can be used to explore technology integration that can reduce fuel consumption. Two conventional powertrain modifications are explored that provide potential pathways that significantly alter the base powertrain and include 1.) a torque converter disconnect clutch and 2.) a low voltage stop-start system that have the potential to reduce fuel consumption on the end user representative drive cycle by 10.3% and 9.8%, respectively. Details of how the powertrain modifications would be executed, physical hardware, and application to other heavy-duty nonroad vehicle applications are included in the discussion.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2020

Direct-DC Power in Buildings: Identifying the Best Applications Today for Tomorrow’s Building Sector

Driven by the increased use of direct current (DC) sources (photovoltaics, battery storage) and DC end-use devices (electronics, solid-state lighting, efficient motors), DC power distribution in buildings and DC microgrids have been proposed as a way to achieve greater efficiency, cost savings, and resiliency in a transitioning building sector. Despite these important benefits, several market and technological barriers inhibit the development of DC distribution, and the market for DC in buildings is still largely in the demonstration phase. Therefore, to jumpstart this technology, a clear path forward must emerge at this early stage of deployment. The goal of this paper is to define specific end-use cases for which DC distribution in buildings is a value proposition today by defining clear efficiency and resiliency benefits while addressing barriers to implementation. The paper begins with a technology and market assessment of DC distribution equipment, end uses, and technology standards. That is followed by results from an expert elicitation of DC power and building end-use professionals (e.g., electrical designers, building operators, engineers) and reports on-site visits and lessons learned from successful (and less successful) field deployments of DC distribution projects in North America. We present specific adoption pathways at the community and building level that can be implemented today, and evaluate them using qualitative and quantitative metrics, such as technology and market readiness, energy savings, and resiliency.

building-level electrical distribution↗

DOE OSTI2022

Comparative Technoeconomic Analysis of Pathways for Electrochemical Reduction of CO 2 with Methanol to Produce Methyl Formate

Electrochemical CO 2 reduction has promise as a technology that could help society reach carbon neutrality while producing valuable fuels and chemicals. Herein, the electrochemical synthesis of methyl formate, a product not observed in aqueous CO 2 electrolysis, has been analyzed by a rigorous technoeconomic model to evaluate its commercial viability. Methyl formate synthesis has been demonstrated with high faradaic efficiency through the electroreduction of CO 2 in methanol. Four competing approaches were analyzed: (1) Electroreduction of captured CO 2 in a dual CH 3 OH/H 2 O electrolyzer, (2) Direct electroreduction of flue gas CO 2 in a dual CH 3 OH/H 2 O electrolyzer, (3) Electroreduction of captured CO 2 in a CH 3 OH/CH 3 OH electrolyzer, and (4) Electroreduction of captured CO 2 in a H 2 O/H 2 O electrolyzer with a downstream CH 3 OH reactor. Sensitivity analyses, cost contour plots, and comparison plots were generated. The dual methanol/water electrolysis approach was the most cost-competitive, with a levelized cost of methyl formate below the present market price. Here, the all-methanol electrolysis route was more expensive due to increased methanol consumption and greater distillation costs. Methyl formate production through aqueous CO 2 electrolysis to formic acid with a secondary esterification reaction was by far the most expensive approach, primarily due to the energy-intensive nature of distilling formic acid from water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

A deep decarbonization framework for the United States economy – a sector, sub-sector, and end-use based approach

Achieving the United States' target of net-zero greenhouse gas emissions by 2050 will require technological transformations and energy sector mitigation. To understand the role of dynamically evolving technologies, identify synergies and dissonance and the effect of allocating limited low-carbon biomass resources in decarbonizing the U.S. economy, we developed the Decarbonization Scenario Analysis Model. A Life Cycle Assessment based approach is implemented considering the U.S. economy as the functional unit, to estimate greenhouse gas mitigation potential for projected energy demand based on several sector-level and cross-sectoral decarbonization pathways. Direct and supply-chain emissions are accounted, resulting from changes in patterns of energy generation and consumption, technology breakthroughs, and reductions in fugitive emissions over time at the granularity of economic sectors, sub-sectors, and end-use. Decarbonization strategies are implemented over a reference case developed using Energy Information Administration (EIA AEO) projection of economic activities for 2020–2050. Based on the considered scenarios, 80–90% economy-wide decarbonization relative to the 2020 reference case is projected. Electrification, low-carbon fuels, and reduction of fugitive emissions play the most significant role to decarbonization. The majority of the remaining emissions are accounted to the supply-chain and end-use emissions from natural gas and diesel fossil-based fuels in heavy duty transportation and heavy industries, highlighting the need for developing low-carbon and carbon-negative alternatives to mitigate those fossil-based carbon emissions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2025

An unwanted guest in the electrochemical oxidation of high-voltage Li-ion battery electrolytes: the life of highly reactive protons

Lithium-ion batteries (LIBs) are central to the urgent societal need to decarbonize both transportation and energy storage on the grid. Unfortunately, despite their attractive energy/power density, as well as high coulombic and energy efficiencies, further improvement of this technology – especially their durability – is desperately needed. To support these efforts, our study focuses on fundamental understanding of the decomposition pathways for LIB electrolytes at the cathode–electrolyte interface (CEI), as the nature of these reactions directly controls the extent to which cell capacity and voltage decays in these systems. In this study, we employ electrochemical methods, coupled with product analysis using NMR spectroscopy and mass spectrometry, to determine the decomposition mechanisms in both model and technologically relevant electrolytes. Remarkably, we discovered the electrochemical formation of protons with high chemical activity, comparable to known superacids, at potentials relevant to practical Li-ion batteries. Their reactivity toward every individual component of the CEI provides a unified thermochemical origin for a myriad of side reactions that are commonly associated with the electrochemical reaction. In particular, electrochemically generated protons react with intact EC molecules to form CO 2 and other short and long chain ethers. They also undergo an acid–base reaction with LiPF 6 , to form the weaker acid HF, and with the cathode active material, leaching transition metals into the electrolyte. Collectively, the results of this study all point to the urgent need to either mitigate this proton formation or introduce benign harvesting additives via new electrolyte design strategies.

Ilic, Stefan [Argonne National Laboratory (ANL), A↗

DOE OSTI2024

Analysis of Infrastructures for Processing Plastic Waste using Pyrolysis-Based Chemical Upcycling Pathways

Modern mechanical recycling infrastructure for plastic is capable of processing only a small subset of waste plastics, reinforcing the need for parallel disposal methods such as landfilling and incineration. Emerging pyrolysis-based chemical technologies can "upcycle" plastic waste into high-value polymer and chemical products and process a broader range of waste plastics. In this work, we study the economic and environmental benefits of deploying an upcycling infrastructure in the continental United States for producing low-density polyethylene (LDPE) and polypropylene (PP) from post-consumer mixed plastic waste. Our analysis aims to determine the market size that the infrastructure can create, the degree of circularity that it can achieve, the prices for waste and derived products it can propagate, and the environmental benefits of diverting plastic waste from landfill and incineration facilities it can produce. We apply a computational framework that integrates techno-economic analysis, life cycle assessment, and value chain optimization. Our results demonstrate that the infrastructure generates an economy of nearly 20 billion USD and positive prices for plastic waste, opening opportunities for compensation to residents who provide plastic waste. Our analysis also indicates that the infrastructure can achieve a plastic-to-plastic degree of circularity of 34% and remains viable under various external factors (including technology efficiencies, capital investment budgets, and polymer market values). Finally, we present significant environmental benefits of upcycling over alternative landfill and incineration waste disposal methods, and comment on ongoing work expanding our modeling methodology to other chemical upcycling pathway case studies, including hydroformylation of specific plastics to chemicals.

Interdisciplinary↗

DOE OSTI2023

Algal Biomass Conversion to Fuels via Combined Algae Processing (CAP): 2022 State of Technology and Future Research

The annual State of Technology (SOT) assessment is an essential activity for platform research conducted under the Bioenergy Technologies Office (BETO). It allows for the impact of research progress (both directly achieved in-house at NREL and furnished by partner organizations) to be quantified in terms of economic improvements in the overall biofuel production process for a particular biomass processing pathway, whether based on terrestrial or algal biomass feedstocks. As such, initial benchmarks can be established for currently demonstrated performance, and progress can be tracked toward out-year goals to ultimately demonstrate economically viable biofuel technologies. NREL's algae SOT benchmarking efforts focus both on front-end algal biomass production and separately on back-end conversion to fuels through NREL's "combined algae processing" (CAP) pathway. The production model is based on outdoor long-term cultivation data, enabled by comprehensive algal biomass production trials conducted under Development of Integrated Screening, Cultivar Optimization, and Verification Research (DISCOVR) consortium efforts and driven by data furnished by Arizona State University's (ASU's) Arizona Center for Algae Technology and Innovation (AzCATI) test bed site. The CAP model is primarily based on experimental efforts conducted under NREL research and development projects, with some process parameters provided by partner organizations. Assumptions regarding the wet storage of algae use data provided by Idaho National Laboratory (INL), while parts of the polyurethane production process leverage BETO-funded research from collaborators at Algenesis and the University of California, San Diego (UCSD). This report focuses on back-end conversion of algal biomass through the CAP pathway, highlighting the 2022 updates to minimum fuel selling price (MFSP). This update incorporates improvements to fermentation performance for two biological pathways through carboxylic acid and 2,3-butanediol (BDO) intermediates, as demonstrated through parallel research on the biochemical conversion of corn stover. Improvements are applied to the glucose fraction of the biomass only, while parameters regarding the conversion of the mannose fraction (not a significant component in corn stover) are maintained consistently with prior CAP SOTs. Additional parameters are also updated to reflect the most current understanding of each pathway, including an increase in the catalyst loading requirement in the ketonization step of the acids pathway and a decrease in the fermentation productivity in the BDO pathway. Additionally, the biomass feedstock costs (minimum biomass selling price [MBSP]), yields, and seasonal variability from the upstream cultivation SOT model were also incorporated into downstream Aspen Plus CAP models.

09 BIOMASS FUELS↗

DOE OSTI2025

Machine Learning-Accelerated First-Principles Molecular Dynamics Reveals C–C Coupling Mechanisms toward Ethylene on Cu(100)

Here, the Cu(100) termination has been identified as the most effective facet for converting CO and CO 2 into ethylene. To enhance both the activity and selectivity of ethylene production, we perform machine-learning-accelerated, first-principles molecular dynamics simulations at 298 K in an explicit solvent at pH 7 to elucidate the C–C coupling mechanism─the critical reaction step in forming C 2+ products. Among the six potential C–C coupling pathways, the most feasible are CO* dimerization and CO – CHO* and CHO* – CHO* couplings. Using the computational hydrogen electrode method, we demonstrate that all three pathways are equally accessible at −0.6 V vs RHE. At a potential below −1.0 V vs RHE, the thermodynamic barriers for the CO – CHO* and CHO* – CHO* pathways become negligible. Our computational findings explain the experimental observations, particularly the absence of C 2+ products above −0.4 V vs RHE and the peaks in ethylene production near −0.6 and −1.0 V vs RHE. Since CHO* acts as a key intermediate common to both C–C coupling and CH 4 formation, we propose that suppressing CHO* hydrogenation would inhibit CH 4 pathways, thereby maximizing ethylene selectivity.

CO2 reduction↗

DOE OSTI2024

Investigating biological nitrogen fixation via single-cell transcriptomics

The extensive use of nitrogen fertilizers has detrimental environmental consequences, and it is essential for society to explore sustainable alternatives. One promising avenue is engineering root nodule symbiosis, a naturally occurring process in certain plant species within the nitrogen-fixing clade, into non-leguminous crops. Advancements in single-cell transcriptomics provide unprecedented opportunities to dissect the molecular mechanisms underlying root nodule symbiosis at the cellular level. This review summarizes key findings from single-cell studies in Medicago truncatula, Lotus japonicus, and Glycine max. We highlight how these studies address fundamental questions about the development of root nodule symbiosis, including the following findings: (i) single-cell transcriptomics has revealed a conserved transcriptional program in root hair and cortical cells during rhizobial infection, suggesting a common infection pathway across legume species; (ii) characterization of determinate and indeterminate nodules using single-cell technologies supports the compartmentalization of nitrogen fixation, assimilation, and transport into distinct cell populations; (iii) single-cell transcriptomics data have enabled the identification of novel root nodule symbiosis genes and provided new approaches for prioritizing candidate genes for functional characterization; and (iv) trajectory inference and RNA velocity analyses of single-cell transcriptomics data have allowed the reconstruction of cellular lineages and dynamic transcriptional states during root nodule symbiosis.

Lotus japonicus↗