Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface transformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Research on metal solidification in zero-g state

The containerless solidification of several pure metals and metallic alloys was studied in a low gravity environment. The tests were performed in the MSFC 4.2 s drop tower using a rapid wire melting apparatus designed and built for this purpose. Pure iron and nickel, and alloys of iron-nickel, iron-carbon, nickel-aluminum and tungsten-rhenium were all melted and solidified at a gravity level of approximately 100.000/-4 g. Interpretation of the results has led to an appreciation of the factors controlling the successful execution of this drop test experiment and to a delineation of the limits of applicability of the apparatus. Preliminary metallurgical evaluations are presented of the overall shapes, lattice parameters, surface microstructure,, cross-sectional microstructures, solidification and transformation sequences, evaporative segregation, and localized solute redistribution observed in the low-gravity specimens. The effects of low gravity on metallic solidification are discussed with particular emphasis on observations of spontaneous undercooling and evaporative segregation in uncontained melts.

Papazian, J. M.↗
NASA NTRS1984

Improved resolution rain measurements from spaceborne radar altimeters

Rain measurement of the type described here are considered vital from the standpoint of representing a flag for altimeter data that may be corrupted by rain. It also provides sorely needed rain data over the oceans where little or no such data is available. It is demonstrated that improved resolution measurements of precipitation may be obtained from satellite borne radars with antenna beams having relatively large surface footprints. The method employs deconvolution and Fourier transform procedures, and assumes a knowledge of the antenna beam pattern. As an example, the technique is specifically directed towards the application of future spaceborne radar altimeters which may contain additional range gates to enable the measurement of rain at altitude. It is demonstrated that because of the natural variability of rain in the lateral extent, the standard beam averaging over the footprint could easily produce erroneous interpretations of the intensity of rain and its extent. On the other hand, many of these ambiguities may be removed employing the deconvolution techniques described.

Goldhirsh, J.↗
NASA NTRS1985

Hydrogen and water desorption on the moon - Approximate, on-line simulations

The basic models that have been used over the last 15 years to describe the accumulation and release of solar wind-related species at lunar conditions at the lunar surface are reviewed. Recent results which show that these models are not totally valid are discussed. It is suggested that mature lunar surface soils may act as efficient converters for transforming the flux of energetic solar wind protons into a flux of low-energy hydrogen and water molecules continuously injected into the lunar atmosphere.

Blanford, G. E.↗
NASA NTRS1985

High temperature oxidation of beta-NiAl

The oxidation of single crystal beta-NiAl has been studied primarily using electron microscopy. Oriented metastable Al2O3 phases form during transient oxidation at 800 C. Specific orientation relationships exist on all metal orientations studied and are a result of the small mismatch along aligned close-packed directions in the cation sublattices of the metal and oxide. Transformation of the metastable Al2O3 phases at 1100 C results in an oxide morphology described as the 'lacey' structure of alpha-Al2O3 scales. This structure results from impingement of oriented patches of alpha-Al2O3 as the transformation initiates and moves radially parallel to the surface. Scale growth occurs by diffusion along high angle grain boundaries. A drastic reduction in oxidation rate accompanies the change in oxide morphology.

Koychak, J. K.↗
NASA NTRS1987

Graphics and Flow Visualization of Computer Generated Flow Fields

Flow field variables are visualized using color representations described on surfaces that are interpolated from computational grids and transformed to digital images. Techniques for displaying two and three dimensional flow field solutions are addressed. The transformations and the use of an interactive graphics program for CFD flow field solutions, called PLOT3D, which runs on the color graphics IRIS workstation are described. An overview of the IRIS workstation is also described.

Kathong, M.↗
NASA NTRS1999

Hurricane Directional Wave Spectrum Spatial Variation in the Open Ocean

The sea surface directional wave spectrum was measured for the first time in all quadrants of a hurricane in open water using the NASA airborne scanning radar altimeter (SRA) carried aboard one of the NOAA WP-3D hurricane hunter aircraft at 1.5 km height. The SRA measures the energetic portion of the directional wave spectrum by generating a topographic map of the sea surface. At 8 Hz, the SRA sweeps a radar beam of 1 deg half-power width (two-way) across the aircraft ground track over a swath equal to 0. 8 of the aircraft height, simultaneously measuring the backscattered power at its 36 GHz (8.3 mm) operating frequency and the range to the sea surface at 64 positions. These slant ranges are multiplied by the cosine of the incidence angles to determine the vertical distances from the aircraft to the sea surface. Subtracting these distances from the aircraft height produces the sea surface elevation map. The sea surface topography is interpolated to a uniform grid, transformed by a two-dimensional FFT, and Doppler corrected. The data presented were acquired on 24 August 1998 when hurricane Bonnie was east of the Bahamas and moving slowly to the north. Wave heights up to 18 m were observed and the spatial variation of the wave field was dramatic. The dominant waves generally propagated at significant angles to the downwind direction and at times there were wave fields traveling at right angles to each other. The NOAA aircraft spent over five hours within 180 km of the hurricane Bonnie eye, and made five eye penetrations. A 2-minute animation of the directional wave spectrum spatial variation over this period will be shown.

Wright, C. W.↗
NASA NTRS2000

Hurricane Directional Wave Spectrum Spatial Variation in the Open Ocean and at Landfall

The sea surface directional wave spectrum was measured for the first time in all quadrants of a hurricane in open water using the NASA airborne scanning radar altimeter (SRA) carried aboard one of the NOAA WP-3D hurricane hunter aircraft at 1.5 km height. The SRA measures the energetic portion of the directional wave spectrum by generating a topographic map of the sea surface. At 8 Hz, the SRA sweeps a radar beam of 1' half-power width (two-way) across the aircraft ground track over a swath equal to 0.8 of the aircraft height, simultaneously measuring the backscattered power at its 36 GHz (8.3 mm) operating frequency and the range to the sea surface at 64 positions. These slant ranges are multiplied by the cosine of the off-nadir angles to determine the vertical distances from the aircraft to the sea surface. Subtracting these distances from the aircraft height produces the sea surface elevation map. The sea surface topography is interpolated to a uniform grid, transformed by a two dimensional FFT, and Doppler corrected. The open-ocean data were acquired on 24 August 1998 when hurricane Bonnie was east of the Bahamas and moving toward 330 deg at about 5 m/s. Individual waves up to 18 m height were observed and the spatial variation of the wave field was dramatic. The dominant waves generally propagated at significant angles to the downwind direction. At some positions there were three different wave fields of comparable energy crossing each other. The NOAA aircraft spent over five hours within 180 km of the eye, and made five eye penetrations. On 26 August 1998, the NOAA aircraft flew at 2.2 km height when hurricane Bonnie was making landfall near Wilmington, NC, documenting the directional wave spectrum in the region between Charleston, SC and Cape Hatteras, NC. The aircraft flight lines included segments near and along the shoreline as well as far offshore. Animations of the directional wave spectrum spatial variation along the aircraft tracks on the two flights will be presented using a 100: 1 time compression.

Walsh, Edward J.↗
NASA NTRS2000

Hurricane Directional Wave Spectrum Spatial Variation in the Open Ocean and at Landfall

The sea surface directional wave spectrum was measured for the first time in all quadrants of a hurricane in open water using the NASA airborne scanning radar altimeter (SRA) carried aboard one of the NOAA WP-3D hurricane hunter aircraft at 1.5 km height. The SRA measures the energetic portion of the directional wave spectrum by generating a topographic map of the sea surface. At 8 Hz, the SRA sweeps a radar beam of 1 E half-power width (two-way) across the aircraft ground track over a swath equal to 0.8 of the aircraft height, simultaneously measuring the backscattered power at its 36 GHz (8.3 mm) operating frequency and the range to the sea surface at 64 positions. These slant ranges are multiplied by the cosine of the incidence angles to determine the vertical distances from the aircraft to the sea surface. Subtracting these distances from the aircraft height produces the sea surface elevation map. The sea surface topography is interpolated to a uniform grid, transformed by a two-dimensional FFT, and Doppler corrected. The open-ocean data were acquired on 24 August 1998 when hurricane Bonnie was east of the Bahamas and moving slowly to the north. Individual waves with heights up to 18 m were observed and the spatial variation of the wave field was dramatic. The dominant waves generally propagated at significant angles to the downwind direction. At some positions there were three different wave fields of comparable energy crossing each other. The NOAA aircraft spent over five hours within 180 km of the hurricane Bonnie eye, and made five eye penetrations. A 3-minute animation of the directional wave spectrum spatial variation over this period will be shown as well as summary plots of the wave field spatial variation. On 26 August 1998, the NOAA aircraft flew at 2.2 km height when hurricane Bonnie was making landfall near Wilmington, NC, documenting the directional wave spectrum in the region between Charleston, SC and Cape Hatteras, NC. The aircraft ground track included both segments along the shoreline and Pamlico Sound as well as far offshore. An animation of the directional wave spectrum spatial variation at landfall will be presented and contrasted with the spatial variation when Bonnie was in the open ocean on 24 August 1998.

Walsh, E. J.↗
NASA NTRS2003

Fundamental Studies of Crystal Growth of Microporous Materials

Microporous materials are framework structures with well-defined porosity, often of molecular dimensions. Zeolites contain aluminum and silicon atoms in their framework and are the most extensively studied amongst all microporous materials. Framework structures with P, Ga, Fe, Co, Zn, B, Ti and a host of other elements have also been made. Typical synthesis of microporous materials involve mixing the framework elements (or compounds, thereof) in a basic solution, followed by aging in some cases and then heating at elevated temperatures. This process is termed hydrothermal synthesis, and involves complex chemical and physical changes. Because of a limited understanding of this process, most synthesis advancements happen by a trial and error approach. There is considerable interest in understanding the synthesis process at a molecular level with the expectation that eventually new framework structures will be built by design. The basic issues in the microporous materials crystallization process include: (a) Nature of the molecular units responsible for the crystal nuclei formation; (b) Nature of the nuclei and nucleation process; (c) Growth process of the nuclei into crystal; (d) Morphological control and size of the resulting crystal; (e) Surface structure of the resulting crystals; and (f) Transformation of frameworks into other frameworks or condensed structures.

Singh, Ramsharan↗
NASA NTRS2005

Beamline Electrostatic Levitator (BESL) for in-situ High Energy K-Ray Diffraction Studies of Levitated Solids and Liquids at High Temperature

Determinations of the phase formation sequence, the crystal structures and the thermodynamic properties of materials at high temperatures are difficult because of contamination from the sample container and environment. Containerless processing techniques, such as electrostatic (ESL), electromagnetic (EML), aerodynamic, and acoustic levitation, are most suitable these studies. An adaptation of ESL for in-situ structural studies of a wide range of materials, including metals, semiconductors, insulators using high energy (125 keV) synchrotron x-rays is described here. This beamline ESL (BESL) allows the in-situ determination of the atomic structures of equilibrium solid and liquid phases, including undercooled liquids, as well as real-time studies of solid-solid and liquid-solid phase transformations. The use of image plate (MAR345) or GE-Angio detectors enables fast (30 ms - 1s) acquisition of complete diffraction patterns over a wide q-range (4 - 140/mm). The wide temperature range (300 - 2500 K), containerless processing under high vacuum (10(exp -7) - 10(exp -8) torr), and fast data acquisition, make BESL particularly suitable for phase diagram studies of high temperature materials. An additional, critically important, feature of BESL is the ability to also make simultaneous measurement of a host of thermo-physical properties, including the specific heat, enthalpy of transformation, solidus and liquidus temperatures, density, viscosity, and surface tension; all on the same sample and simultaneous with the structural measurements.

Gangopadhyay, A. K.↗
NASA NTRS2016

Parallel Grand Canonical Monte Carlo (ParaGrandMC) Simulation Code

This report provides an overview of the Parallel Grand Canonical Monte Carlo (ParaGrandMC) simulation code. This is a highly scalable parallel FORTRAN code for simulating the thermodynamic evolution of metal alloy systems at the atomic level, and predicting the thermodynamic state, phase diagram, chemical composition and mechanical properties. The code is designed to simulate multi-component alloy systems, predict solid-state phase transformations such as austenite-martensite transformations, precipitate formation, recrystallization, capillary effects at interfaces, surface absorption, etc., which can aid the design of novel metallic alloys. While the software is mainly tailored for modeling metal alloys, it can also be used for other types of solid-state systems, and to some degree for liquid or gaseous systems, including multiphase systems forming solid-liquid-gas interfaces.

Vesselin I Yamakov↗
NASA NTRS2022

Parallel Grand-Canonical Monte Carlo (ParaGrandMC) User’s Manual Version 2.0

This manual describes the commands and command line options for the Parallel Grand Canonical Monte Carlo version 2.0 (ParaGrandMC.2.0) simulation code. This is a highly scalable parallel FORTRAN 2003 code for simulating the thermodynamic evolution of materials at the atomic level, and predicting their thermodynamic state, phase diagram, chemical composition and mechanical properties. The code is specifically designed to simulate multi-component alloy systems, predict solid-state phase transformations such as austenite-martensite transformations, precipitate formation, recrystallization, capillary effects at interfaces, surface absorption, etc., which can aid the design of novel metallic alloys. While the software is mainly tailored for modeling metal alloys, it can also be used for other types of solid-state systems, and to some degree for liquid or gaseous systems, including multiphase systems forming solid-liquid-gas interfaces. In addition to performing Monte Carlo (MC) simulations, the code can also perform Molecular Dynamics (MD) and Langevin Dynamics (LD) simulations, which can be combined and interchanged with MC for faster and more efficient system evolution. A detailed description of the MC part of the code is provided in the NASA ParaGrandMC report: NASA/CR–2016-219202; http://www.sti.nasa.gov.

High performance computing↗
NASA NTRS2005

Generating Solid Models from Topographical Data

A method of generating solid models of terrain involves the conversion of topographical data into a form useable by a rapid-prototyping (RP) machine. The method was developed to enable the use of the RP machine to make solid models of Martian terrain from Mars Orbiter laser-altimeter topographical data. The method is equally applicable to the generation of models of the terrains of other astronomical bodies, including other planets, asteroids, and Earth. Topographical data describe a terrain in terms of a set of three-dimensional coordinates [e.g., Cartesian (x,y,z) or polar (latitude, longitude, radius) coordinates] of points or nodes on the terrain surface. The input data for the RP machines are required to provide a three-dimensional description, not of a single surface, but of a volume in this case, a ground volume that underlies the terrain surface. The description is required to be in the form of triangular elements that connect the nodes of all the surfaces and that completely bound the volume, with no open areas, no overlap of triangles, and no extraneous geometric elements. The software used in the present model-generation method was written in IDL - an advanced programming language that affords a number of tools, including subroutines that triangularize surfaces. The software creates a volume from the topographical surface data by adding sides to the edges of the terrain surface and joining the sides with a bottom surface. Each of the sides is triangularized by use of IDL subroutines, and then the software searches for extraneous elements and removes them. Topographical data are usually presented in a grid corresponding to polar coordinates, so that a model generated from such data is equivalent to a topographical map in Mercator projection. However an RP machine is fully capable of including the curvature of a planetary body in a model that it makes. Therefore, the software also offers a capability to transform the topographical data to a projection onto a surface having a curvature corresponding to that of the surface of the modeled planet.

Keller, John W.↗
DOE OSTI2020

Elimination of MHD current sheets by modifications to the plasma wall in a fixed boundary model

Models of magnetohydrodynamic (MHD) equilibia that for computational convenience assume the existence of a system of nested magnetic flux surfaces tend to exhibit singular current sheets. These sheets are located on resonant flux surfaces that are associated with rational values of the rotational transform. We study the possibility of eliminating these singularities by suitable modifications of the plasma boundary, which we prescribe in a fixed boundary setting. We find that relatively straightforward iterative procedures can be used to eliminate weak current sheets that are generated at resonant flux surfaces by the nonlinear interactions of resonating wall harmonics. These types of procedures may prove useful in the design of fusion devices with configurations that enjoy improved stability and transport properties.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2003

Capabilities of the Materials Contamination Team at Marshall Space Flight Center

The Materials Contamination Team at the Marshall Space Flight Center (MSFC) has been recognized for its contributions supporting the National Aeronautics and Space Administration (NASA) spacecraft development programs. These programs include the Reusable Solid Rocket Motor (RSRM), Chandra X-Ray Observatory, and the International Space Station (ISS). The Environmental Effects Group, with the Materials Contamination Team and the Space Environmental Effects Team has been an integral part of NASA's success by the testing, evaluation, and qualification of materials, hardware, and processes. This paper focuses on the capabilities of the Materials Contamination Team. The Materials Contamination Team's realm of responsibility includes establishing contamination control during all phases of hardware development, including design, manufacturing, assembly, test, transportation, launch site processing, on-orbit exposure, return, and refurbishment. The team continues its mission of reducing the risk of equipment failure due to molecular or particulate contamination. Contamination is a concern in the Space Shuttle with sensitive bond-lines and reactive fluid (liquid oxygen) compatibility as well as for spacecraft with sensitive optics, such as Hubble Space Telescope and Chandra X-ray Observatory. The Materials Contamination Team has a variety of facilities and instrumentation capable of contaminant detection, identification, and monitoring. The team addresses material applications dealing with environments, including production facilities, clean rooms, and on-orbit exposure. The optically stimulated electron emission (OSEE) system, the Ultraviolet (UV) fluorescence (UVF) surface contamination detection, and the Surface Optics Corporation 400 (SOC 400) portable hand-held Fourier Transform Infrared (FTIR) spectrometer are state-of-the-art tools for in-process molecular contamination detection. The team of engineers and technicians also develop contamination calibration standards and evaluate new surface cleanliness inspection technologies. The team utilizes facilities for on-orbit simulation testing of materials for outgassing and molecular film deposition characteristics in the presence of space environmental effects, such as Atomic Oxygen (AO) and UV radiation exposure. The Materials Contamination Team maintains databases for process materials as well as outgassing and optical compatibility test results for specific environments.

Burns, Howard↗
DOE OSTI2021

Plasma-Initiated Graft Polymerization of Acrylic Acid onto Fluorine-Doped Tin Oxide as a Platform for Immobilization of Water-Oxidation Catalysts

The discovery of new and versatile strategies for the immobilization of molecular water-oxidation catalysts (WOCs) is crucial for developing clean energy conversion devices [e.g., (photo)electrocatalytic cells for water splitting]. The traditional approach for surface attachment to transparent conductive oxides [e.g., fluorine doped tin oxide (FTO)] is via synthetic modification of the ligand architecture to incorporate functional groups such as carboxylic acids (-COOH) or phosphonates (-PO 3 H 2 ) prior to immobilization. However, challenges arising from desorption and the cumbersome derivatizations steps have limited the scope and applications of surface-bound WOCs. Herein, we report the successful immobilization of underivatized Ru(II)-based WOCs (Ru–Cat1 = [Ru(tpy) (bpy) (H 2 O)] 2+ (tpy = 2,2':6'2"–terpyridine and bpy = 2,2;-bipyridine) and Ru–Cat2 = [Ru(Mebimpy) (bpy) (H 2 O)] 2+ (Mebimpy = 2,6-bis(1-methylbenzimidazol-2-yl) pyridine)) and the Ru(II) polypyridyl chromophore Ru–C3 = [Ru(bpy) 3 ] 2+ onto a FTO plasma-grafted poly(acrylic acid) surface (PAA|FTO). Various characterization techniques such as attenuated total reflectance Fourier transform infrared spectroscopy, scanning electron microscopy, atomic force microscopy, and cyclic voltammetry measurements provide evidence for the plasma-induced grafted PAA|FTO film and immobilization. Surface stability and electrocatalytic properties of these new hybrid composite films upon cycling were investigated at different pH values. Immobilized Ru–Cat1 and Ru–Cat2 onto PAA|FTO displayed pH-dependent (RuIII/RuII) couples and onset potentials indicative of PCET (proton-coupled electron transfer) reactions. Based on cyclic voltammetry results and spectroscopic monitoring, the immobilized WOCs Ru–Cat1 and Ru–Cat2 exhibited a higher surface stability in neutral aqueous solutions relative to Ru–C3 upon electrochemical oxidation. Furthermore, we attribute the surface PCET and stability to the presence of a water ligand in the coordination sphere of immobilized Ru–Cat1 and Ru–Cat2 which can H-bond with negatively charged carboxylate groups of the cross-linked PAA brushes. Our findings demonstrate that the plasma-grafted polymeric network onto FTO offers a versatile platform to directly anchor unmodified homogeneous WOCs or chromophores for potential applications in solar-to-fuel energy conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1977

Asteroid surface compositions from infrared spectroscopic observations - Results and prospects

Advances in IR detector technology, the increased availability of large aperture telescopes, and the techniques of Fourier transform spectroscopy now permit IR (with wavelengths greater than 1 micron) spectroscopic observations of asteroid surfaces. Asteroids already observed include Ceres, Vesta, and Eros. These initial results demonstrate that such studies can contribute new data concerning asteroid compositions. Some of the most diagnostic features of mineral spectra are in the IR spectral region, and for featureless spectra characterized only by slopes the extension of the spectral reflectivity curve into the IR provides tighter constraints on possible mineralogies. A systematic study of additional asteroids should exploit even further this new observational link to problems of meteorite origin and solar system evolution.

Larson, H. P.↗
DOE OSTI2026

Highly Crystalline and Porous Borocarbonitrides as Metal‐Free Catalysts for Boosted N‐Heterocycle Dehydrogenation

Safe and efficient hydrogen storage is pivotal for enabling a clean hydrogen economy. Liquid organic hydrogen carriers (LOHCs) offer a practical solution, but their deployment is hindered by the lack of highly active and economical dehydrogenation catalysts. In this work, we report a metal‐free catalyst design that overcomes the long‐standing trade‐off between crystallinity and surface area in two‐dimensional frameworks for highly efficient dehydrogenation of LOHCs. A flux‐assisted reconstruction strategy transforms amorphous borocarbonitrides (AM‐BCN) into highly crystalline, defect‐rich BCN nanosheets (C‐BCN) with large surface area and accessible porosity, as confirmed by complementary spectroscopic, x‐ray, and neutron analyses. C‐BCN catalyzes the acceptor‐less dehydrogenation of aza‐fused LOHCs with quantitative hydrogen release under mild conditions, outperforming AM‐BCN and previously reported metal‐free scaffolds. Mechanistic insights from x‐ray, neutron scattering, and theoretical calculations identify open C‐B‐N and N‐B‐N defect motifs as the primary active sites. This work establishes a generalizable strategy to engineer crystalline, porous, defect‐rich two‐dimensional lattices and demonstrates a highly active metal‐free platform for LOHC dehydrogenation with high‐purity H 2 generation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗