Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural complexity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Structural evaluation of curved stiffened composite panels fabricated using a THERM-Xsm process

The use of composites in aircraft structures is often limited by material and manufacturing costs which, for some designs and applications, are prohibitively high. To increase the frequency of application of composites in primary airframe components alternative manufacturing processes are sought that reduce cost and/or enhance structural efficiency. One alternative process involves the use of THERM-Xsm as the pressure transfer medium during autoclave curing. THERM-Xsm, a silicon-based flow able polymer which behaves like a liquid under autoclave presssure, transmits quasi-hydrostatic pressure to all contacting surfaces of the part to be cured. Once the autoclave pressure is relieved, THERM-Xsm reverts back to the powdery solid state and can be reused many times. The THERM-Xsm process to be evaluated is depicted and consists of (1) enclosing the tool and part to be cured by a set of frames that create a box, (2) pouring THERM-Xsm powder onto the part and filling the box, and (3) placing a vacuum bag over the box assembly. In this program, a separating non-porous film (Teflon) was placed between the part to be cured and THERM-Xsm powder to avoid any contamination. The use of THERM-Xsm has two significant advantages over conventional manufacturing procedures. First, it eliminates complicated hard tooling since it guarantees uniform pressure transfer and thus, good compaction at complex structural details (such as frame-stiffener intersections and corners). Second, it greatly simplifies vacuum bagging, since once the part to be cured is covered by THERM-Xsm powder, the vacuum bag need only conform to a relatively flat shape reducing significantly the number of pleats required. A program is on-going at Sikorsky Aircraft to evaluate the structural performance of complex composite fuselage structures made with this THERM-Xsm process and to quantify the impact of THERM-Xsm on manufacturing labor hours and cost. The program involves fuselage panel optimization analysis, a building block test program where structural details representative of the full-scale article are analyzed and tested, and static and fatigue test/analysis of the full-scale test articles. The main results of this program are reported.

Kassapoglou, Christos↗
DOE OSTI2018

Structural insight into a novel indole prenyltransferase in hapalindole-type alkaloid biosynthesis

FamD1 is a novel CloQ/NphB-family indole prenyltransferase which involves in hapalindole-type alkaloid biosynthesis. Here the native FamD1 structure and three protein-ligand complexes are analyzed to investigate the molecular basis of substrate binding and catalysis. FamD1 adopts a typical ABBA architecture of aromatic prenyltransferase, in which the substrate-binding chamber is found in the central β-barrel. The indole-containing acceptor substrate is bound adjacent to the prenyl donor. Based on the complex structures, a catalytic mechanism of FamD1 is proposed. Functional implications on the sister enzyme FamD2 are also discussed.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Electronic and Thermal Properties of the Cation Substitution-Derived Quaternary Chalcogenide CuInSnSe 4

Quaternary chalcogenides continue to be of interest for a variety of technological applications, with physical properties stemming from their structural complexity and stoichiometric variation. In certain structure types, partial vacancies on specific lattice positions present an opportunity to investigate electrical and thermal properties in light of these lattice defects. In this work, we investigated the structural, thermal, and electronic properties of CuInSnSe 4 , a material that belongs to a relatively unexplored class of quaternary chalcogenides with a defect adamantine crystal structure. First-principles calculations together with experimental measurements revealed a chalcopyrite-like structure with inherent vacancies and characteristic s–p and p–d orbital hybridizations in the electronic structure of the material. Cation disorder and lattice anharmonicity result in very low thermal conductivity with values significantly lower than those for related compositions. In conclusion, this work reveals the fundamental physical properties of a previously uninvestigated quaternary chalcogenide and may aid investigations of similar as well as other quaternary chalcogenide compositions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Cracking the code of multi-layer films to promote circularity in single-use plastic packaging

Multi-layer film packaging (MLF) revolutionized food preservation by combining diverse material layers to optimize barrier properties, mechanical strength, and shelf-life. These materials are essential for transporting perishables across various climates and allow for access to fresh goods in “food deserts”, but they pose significant recycling challenges due to their structural complexity. This perspective examines key structure-property relationships governing barrier performance and highlights innovations in material design. We explore how machine learning can predict performance metrics and propose recyclable alternatives, integrating data-driven approaches with material science insights. By challenging the status quo of MLF design, we advocate for circularity in food packaging, inspiring innovation at the intersection of sustainability, material science, and artificial intelligence.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Improving Protein–Ligand Interaction Modeling with cryo-EM Data, Templates, and Deep Learning in 2021 Ligand Model Challenge

Elucidating protein–ligand interaction is crucial for studying the function of proteins and compounds in an organism and critical for drug discovery and design. The problem of protein–ligand interaction is traditionally tackled by molecular docking and simulation, which is based on physical forces and statistical potentials and cannot effectively leverage cryo-EM data and existing protein structural information in the protein–ligand modeling process. In this work, we developed a deep learning bioinformatics pipeline (DeepProLigand) to predict protein–ligand interactions from cryo-EM density maps of proteins and ligands. DeepProLigand first uses a deep learning method to predict the structure of proteins from cryo-EM maps, which is averaged with a reference (template) structure of the proteins to produce a combined structure to add ligands. The ligands are then identified and added into the structure to generate a protein–ligand complex structure, which is further refined. The method based on the deep learning prediction and template-based modeling was blindly tested in the 2021 EMDataResource Ligand Challenge and was ranked first in fitting ligands to cryo-EM density maps. These results demonstrate that the deep learning bioinformatics approach is a promising direction for modeling protein–ligand interactions on cryo-EM data using prior structural information.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

Coupling fine-scale root and canopy structure using ground-based remote sensing

Ecosystem physical structure, defined by the quantity and spatial distribution of biomass, influences a range of ecosystem functions. Remote sensing tools permit the non-destructive characterization of canopy and root features, potentially providing opportunities to link above- and belowground structure at fine spatial resolution in functionally meaningful ways. To test this possibility, we employed ground-based portable canopy LiDAR (PCL) and ground penetrating radar (GPR) along co-located transects in forested sites spanning multiple stages of ecosystem development and, consequently, of structural complexity. We examined canopy and root structural data for coherence (i.e., correlation in the frequency of spatial variation) at multiple spatial scales 10 m within each site using wavelet analysis. Forest sites varied substantially in vertical canopy and root structure, with leaf area index and root mass more becoming even vertically as forests aged. In all sites, above- and belowground structure, characterized as mean maximum canopy height and root mass, exhibited significant coherence at a scale of 3.5–4 m, and results suggest that the scale of coherence may increase with stand age. Our findings demonstrate that canopy and root structure are linked at characteristic spatial scales, which provides the basis to optimize scales of observation. Lastly, our study highlights the potential, and limitations, for fusing LiDAR and radar technologies to quantitatively couple above- and belowground ecosystem structure.

09 BIOMASS FUELS↗
NASA NTRS1987

Orbital atmospheric physics and dynamics

There are two ways of modeling the upper atmosphere. One is the empirical model that makes use of experimental data on means and excursions from the mean and fits the data in a self-consistent manner. The other approach is to deal directly with the physical processes. This is difficult since what is happening is extremely complex. Data measured using an interferometer to give Doppler shifts of airglow lines showed 300 to 800 m/sec winds with a complex structure in the upper region of the thermosphere at high latitudes. Ionospheric electric fields, strongly influenced by interaction with the solar wind, drive the ionized component and large neutral winds result due to momentum transfer between the charged particles and the neutrals. Frictional heating results from movement of ions through the neutrals, which also influences the compositional structure. These are examples of the complex interactions involved. The NCAR General Circulation Model (tropospheric) was adapted for use at thermospheric altitudes: the Thermospheric General Circulation Model (TGCM). The model makes use partly of primitive equations and partly of empirical data for some quantities such as electron density, magnetic field, and ion drift.

Roble, Raymond↗
NASA NTRS1988

Structural patterns in high grade terrain in parts of Tamil Nadu and Karnataka

Detailed geological mapping in parts of Tamil Nadu and Karnataka has brought out vast areas occupied by highly deformed charnockite and high grade gneisses. These areas, similar to high grade shield terrains in other parts of the world have the impress of extensive tectonic reworking multideformation and polymetamorphism and are closely associated with layered ultramafics, shelf type sediments and different igneous events. In North Arcot and Charmapuri districts of Tamil Nadu and Kollegal taluk in Mysore district in Karnataka, charnockite is intensely cofolded with a supracrustal succession of layered ultramafics, pyroxene granulite, pink granolites, magnetite quartzite and khondalites. These areas have undergone five phases of deformation, five generations of basic dyke activities, four phases of migmatisation and two periods of metallogeny. Geochronological data ranges from 2900 m.y. to 750 m.y. In working out the tectanostratigraphy of the above areas the basic dykes of different generations have served as major time markers. In addition, the persistent strike continuity of linear bands of pyroxene granulite, pink granolite and magnetite quartzite has been of great utility in using them as structural markers for bringing out the complex structural history in these areas.

Sugavanam, E. B.↗
NASA NTRS1992

Spectral evolution during a complex gamma ray burst observed with BATSE

More than 270 gamma ray bursts have been observed to date with the BATSE (Burst and Transient Source Experiment) aboard the Compton Gamma Ray Observatory. Many have a duration of 10 seconds or more and complex structure with multiple peaks or spikes. Complex bursts in the energy range 30 keV to 1 MeV were systematically analyzed to determine the relations between intensity and spectral shape, or hardness. The burst hardness rises and falls in during spikes, but somewhat earlier than the intensity. A simple correlation between intensity and hardness is, therefore, not observed: the intensity lags instead. Results from one burst which shows evidence for longer lags in longer spikes are reported.

Gruber, D. E.↗
NASA NTRS1995

Circinus X-1 revisited: Fast-timing properties in relation to spectral state

We have studied the X-ray spectral and fast-timing variations of Cir X-1 by performing a homogenous analysis of all EXOSAT ME data on this source using X-ray hardness-intensity diagrams (HIDs), color-color diagrams (CDs), and power spectra. Cir X-1 exhibits a wide range of power spectral shapes and a large variety in X-ray spectral shapes. At different epochs the power spectra variously resemble those of an atoll source, a Z source, a black-hole candidate, or are unlike any of these. At some epochs one-dimensional connected-branch patterns are seen in HID and CD, and at other times more complex structures are found. We interpret the complex behavior of Cir X-1 in terms of a model where accretion rate, orbital phase and epoch are the main determinants of the source behavior, and where the unique properties of the source are due to two special circumstances: (1) the source is the only known atoll source (accreting neutron star with a very low magnetic field) that can reach the Eddington critical accretion rate, and (2) it has a unique, highly eccentric and probably precessing orbit. Property (1) makes Cir X-1 a very important source for our understanding of the similarities in the observable properties of neutron stars and black holes as it allows to separate out black hole signatures from properties that are merely due to the presence of accretion compact with a low magnetic field.

Oosterbroek, T.↗
NASA NTRS2004

Neural network uncertainty assessment using Bayesian statistics: a remote sensing application

Neural network (NN) techniques have proved successful for many regression problems, in particular for remote sensing; however, uncertainty estimates are rarely provided. In this article, a Bayesian technique to evaluate uncertainties of the NN parameters (i.e., synaptic weights) is first presented. In contrast to more traditional approaches based on point estimation of the NN weights, we assess uncertainties on such estimates to monitor the robustness of the NN model. These theoretical developments are illustrated by applying them to the problem of retrieving surface skin temperature, microwave surface emissivities, and integrated water vapor content from a combined analysis of satellite microwave and infrared observations over land. The weight uncertainty estimates are then used to compute analytically the uncertainties in the network outputs (i.e., error bars and correlation structure of these errors). Such quantities are very important for evaluating any application of an NN model. The uncertainties on the NN Jacobians are then considered in the third part of this article. Used for regression fitting, NN models can be used effectively to represent highly nonlinear, multivariate functions. In this situation, most emphasis is put on estimating the output errors, but almost no attention has been given to errors associated with the internal structure of the regression model. The complex structure of dependency inside the NN is the essence of the model, and assessing its quality, coherency, and physical character makes all the difference between a blackbox model with small output errors and a reliable, robust, and physically coherent model. Such dependency structures are described to the first order by the NN Jacobians: they indicate the sensitivity of one output with respect to the inputs of the model for given input data. We use a Monte Carlo integration procedure to estimate the robustness of the NN Jacobians. A regularization strategy based on principal component analysis is proposed to suppress the multicollinearities in order to make these Jacobians robust and physically meaningful.

Neural Networks (Computer)↗
DOE OSTI2015

Structural study of surfactant-dependent interaction with protein

Small-angle neutron scattering (SANS) has been used to study the complex structure of anionic BSA protein with three different (cationic DTAB, anionic SDS and non-ionic C12E10) surfactants. These systems form very different surfactant-dependent complexes. We show that the structure of protein-surfactant complex is initiated by the site-specific electrostatic interaction between the components, followed by the hydrophobic interaction at high surfactant concentrations. It is also found that hydrophobic interaction is preferred over the electrostatic interaction in deciding the resultant structure of protein-surfactant complexes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1992

Thermostructural tailoring of fiber composite structures

A significant area of interest in design of complex structures involves the study of multidisciplined problems. The coordination of several different intricate areas of study to obtain a particular design of a structure is a new and pressing area of research. In the past, each discipline would perform its task consecutively using the appropriate inputs from the other disciplines. This process usually required several time-consuming iterations to obtain a satisfactory design. The alternative pursued here is combining various participating disciplines and specified design requirements into a formal structural computer code. The main focus of this research is to develop a multidiscipline structural tailoring method for select composite structures and to demonstrate its application to specific areas. The development of an integrated computer program involves the coupling of three independent computer programs using an excutive module. This module will be the foundation for integrating a structural optimizer, a composites analyzer and a thermal analyzer. With the completion of the executive module, the first step was taken toward the evolution of multidiscipline software in the field of composite mechanics. Through the use of an array of cases involving a variety of objective functions/constraints and thermal-mechanical load conditions, it became evident that simple composite structures can be designed to a combined loads environment.

Acquaviva, Thomas H.↗
DOE OSTI2018

Examination of Structure and Bonding in 10-Coordinate Europium and Americium Terpyridyl Complexes

M(TpyNO 2 )(NO 3 ) 3 (H 2 O)·THF (M = La, Ce, Nd, Sm, Eu, Am; TpyNO 2 = 4’-nitrophenyl terpyridyl) have been prepared from the reaction of M(NO 3 ) 3 ·nH 2 O with TpyNO 2 in THF. Structural analysis shows that the metal centers are ten-coordinate, providing the first example of Am III with this coordination number. Further spectroscopic and theoretical evaluation of these complexes reveals utilization of the 5f orbitals in bonding in the Am III complex. Comparison of Nd‒L, Eu‒L, and Am‒L bond distances demonstrates that some caution should be taken in comparing Eu III versus Am III in extraction experiments.

anions↗
NASA NTRS2002

Structural Modeling of a Five-Meter Thin Film Inflatable Antenna/Concentrator

Inflatable structures have been the subject of renewed interest in recent years for space applications such as communications antennas, solar thermal propulsion, and space solar power. A major advantage of using inflatable structures in space is their extremely light weight. An obvious second advantage is on-orbit deployability and related space savings in the launch configuration. A recent technology demonstrator flight for inflatable structures was the Inflatable Antenna Experiment (IAE) that was deployed on orbit from the Shuttle Orbiter. Although difficulty was encountered in the inflation/deployment phase, the flight was successful overall and provided valuable experience in the use of such structures. Several papers on static structural analysis of inflated cylinders have been written, describing different techniques such as linear shell theory, and nonlinear and variational methods, but very little work had been done in dynamics of inflatable structures until recent years. In 1988 Leonard indicated that elastic beam bending modes could be utilized in approximating lower-order frequencies of inflatable beams. Main, et al. wrote a very significant 1995 paper describing results of modal tests of inflated cantilever beams and the determination of effective material properties. Changes in material properties for different pressures were also discussed, and the beam model was used in a more complex structure. The paper demonstrated that conventional finite element analysis packages could be very useful in the analysis of complex inflatable structures. The purposes of this paper are to discuss the methodology for dynamically characterizing a large 5-meter thin film inflatable reflector, and to discuss the test arrangement and results. Nonlinear finite element modal results are compared to modal test data. The work is significant and of considerable interest to researchers because of 1) the large size of the structure, making it useful for scaling studies, and 2) application of commercially available finite element software for modeling pressurized thin-film structures.

Smalley, Kurt B.↗
NASA NTRS2004

The Generalization of Mutual Information as the Information between a Set of Variables: The Information Correlation Function Hierarchy and the Information Structure of Multi-Agent Systems

The topic of this paper is a hierarchy of information-like functions, here named the information correlation functions, where each function of the hierarchy may be thought of as the information between the variables it depends upon. The information correlation functions are particularly suited to the description of the emergence of complex behaviors due to many- body or many-agent processes. They are particularly well suited to the quantification of the decomposition of the information carried among a set of variables or agents, and its subsets. In more graphical language, they provide the information theoretic basis for understanding the synergistic and non-synergistic components of a system, and as such should serve as a forceful toolkit for the analysis of the complexity structure of complex many agent systems. The information correlation functions are the natural generalization to an arbitrary number of sets of variables of the sequence starting with the entropy function (one set of variables) and the mutual information function (two sets). We start by describing the traditional measures of information (entropy) and mutual information.

Wolf, David R.↗
DOE OSTI2018

Poly(propylene)/carbon composite thin films obtained by pulsed electron‐beam deposition

For the first time pulsed electron beam deposition (PED) was used to deposit thin films composed of polymer‐carbon composite material. The targets were polypropylene‐carbon (PP/C) composites, with different carbon fillers: carbon black, nanotubes, or graphene. It was confirmed that coatings with composite structure were obtained – the PED method enables complex structures, including nanotubes, to be ablated whole from the target, transported toward substrate, and incorporated into the polymer matrix. These breakthrough results can contribute significantly to improved understanding of the mechanism of electron beam ablation of polymer and composite materials, and open up new possibilities for the deposition of complex composite thin films for use in, for example, advanced sensor applications.

Jędrzejewski, Roman↗