Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stoichiometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

In Situ Analysis of Manganese Antimonate Oxygen Evolution Electrocatalysts via Ambient Pressure X-ray Photoelectron Spectroscopy

Here, manganese antimonates are earth-abundant potential alternatives to precious metal catalysts for the oxygen-evolution reaction (OER). Herein, X-ray photoelectron spectroscopy was used to determine the surface chemistry of a manganese antimonate catalyst for the OER under ultra-high vacuum, ambient pressure, and in situ reaction conditions. Ex situ and in situ analysis revealed the oxidation states of surficial species as a function of material stoichiometry, water content, and applied potential. In situ XPS measurements in 1.0 M KOH(aq) indicated that relative to the rest state, the surface Mn(III) partially oxidized while effecting the OER, with approximately 15% of the Mn signal attributable to Mn(IV) and the remainder attributable to Mn(III).

36 MATERIALS SCIENCE↗
DOE OSTI2026

Modulating Mid-Gap Electronic States Through Site-Selective Modification in B-Pbx/B'-CuyV2O5/CdS Heterostructures for Photocatalytic Hydrogen Evolution

We interfaced ..beta..-Pbx/..beta..'-CuyV2O5 compounds, with varying stoichiometries of precisely positioned Pb-ions (x) and Cu-ions (y) in interstitial sites along a tunnel-structured ?-V2O5 framework, with cysteine-capped CdS (cysCdS) quantum dots (QDs) to yield heterostructured photocatalysts. ..beta..-Pbx/..beta..'-CuyV2O5 compounds exhibit midgap electronic states with orbital contributions from both Cu 3d and stereochemically active Pb 6s states that show distinctive light-initiated reactivity with photoexcited QDs. ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures were prepared by linker-assisted assembly (LAA). Scanning and transmission electron microscopy, energy-dispersive X-ray spectroscopy, and Raman spectroscopy revealed that cysCdS QDs were deposited onto surfaces of ..beta..-Pbx/..beta..'-CuyV2O5 via LAA. HAXPES revealed that the site-selective positioning of Pb-ions and Cu-ions promoted close energetic alignment of the midgap states of ..beta..-Pbx/..beta..'-CuyV2O5 compounds with the valence-band maximum of cysCdS QDs. Transient absorption spectroscopy revealed that photogenerated holes were transferred from CdS QDs to midgap states of ..beta..-Pbx/..beta..'-CuyV2O5 compounds on time scales <50 ps. Finally, photoelectrochemical and photochemical experiments revealed that ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures promoted the photocatalytic reduction of H+ to H2. In photoelectrochemical experiments, under oxidative conditions, for all ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures, H2 was evolved at a Pt counter electrode while a sacrificial donor was oxidized at the heterostructure-functionalized working electrode. In contrast, under reductive conditions, for ..beta..-Pb0.152V2O5/CdS and ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures, H2 was evolved at the working electrode. In photochemical experiments, dispersed ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures promoted the reduction of H+ to H2 under white-light illumination; ..beta..'-Cu0.55V2O5/CdS and ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures, for which midgap states have Cu 3d orbital character, generated 2-fold more H2 than ..beta..-Pb0.152V2O5/CdS heterostructures. Cu-ion insertion thus appends additional acceptor surface states that improve ligand-mediated hole transfer from photoexcited QDs, but such states are intrinsically limited in mediating hole transport to the substrate as a result of the low mobility of holes in narrow Cu 3d-states. Our results reveal that the density and orbital character of midgap states of ..beta..-Pbx/..beta..'-CuyV2O5 compounds, tunable through recently developed site-selective ion insertion strategies, determine efficiencies of charge-transfer and charge-transport mechanisms that underpin photocatalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Laser-Assisted Synthesis of Monolayer 2D MoSe 2 Crystals with Tunable Vacancy Concentrations: Implications for Gas and Biosensing

We report tuning the structural and electronic properties of atomically thin two-dimensional (2D) materials via defect and vacancy engineering is the key to enabling their potential use in various applications, including electronics, energy, and sensing devices. Vacancies are, for instance, becoming highly promising for the enhanced interaction of gases and biomolecules with 2D materials in energy and sensing applications. However, the deterministic generation of desirable vacancies with tunable concentrations remains a challenge in 2D materials due to the limitations in the current growth methods, such as the complex reaction chemistries and gas flow dynamics. Therefore, engineering defects and vacancies in 2D materials have been mainly limited to destructive top-down processes such as heating, ion bombardments, and laser postprocessing. Here, we introduce a single-step bottom-up synthesis approach for the growth of monolayer MoSe 2 crystals with tunable vacancy concentrations. This method utilizes the spatiotemporal properties and adjustable power densities of the lasers to control the vaporization dynamics of the stoichiometric MoSe 2 powders. Such a mechanism in the vaporization allows us to grow tunable stoichiometry monolayer MoSe 2–x crystals on the substrates. The localized and time-controlled (250 ms to 2 s) vaporization of the MoSe 2 powder by a CO 2 laser enables the formation of monolayer crystals with controlled vacancy concentrations ranging from ~1 to 20%. The effects of laser power, laser irradiation time, and background pressure on the tuning range and subsequent properties of the crystals are investigated and quantified using Raman and photoluminescence spectroscopy, scanning transmission electron microscopy (STEM), and time-correlated single-photon counting (TCSPC). This bottom-up synthesis is a promising approach that allows the deterministic vacancy tuning for future electronics and, in particular, gas and biosensing applications without the need for further postprocessing and potential structural disruption of the crystals.

2D materials↗
DOE OSTI2023

Growth of Nanometer-Thick γ-InSe on Si(111) 7 × 7 by Molecular Beam Epitaxy for Field-Effect Transistors and Optoelectronic Devices

γ-InSe is a semiconductor that holds promising potential in high-performance field-effect transistors and optoelectronic devices. Large-scale, single-phase γ-InSe deposition has proven challenging because of the difficulty in precise control of stoichiometry and the coexistence of different indium selenide phases. In this study, we demonstrate the wafer-scale combinatorial approach to map out the growth window as functions of the Se/In ratio and growth temperature for γ-InSe on the Si(111) 7 × 7 substrate in molecular beam epitaxy. X-ray diffraction (XRD) was used to identify the indium selenide phases, while atomic force microscopy revealed four distinct surface morphologies of γ-InSe, enabling a discussion of the growth mechanisms associated with each morphology. Cross-sectional atomic resolution scanning transmission electron microscopy confirmed that the film was of high crystalline quality and had nearly single-phase γ-InSe. In conclusion, our comprehensive study elucidates the In–Se phase map for thin film growth parameters, providing invaluable landmarks for the reproducible synthesis of high-quality γ-InSe layers.

36 MATERIALS SCIENCE↗
DOE OSTI2023

α-Quartz Phase Stabilization, Surface Texturing, and Tunable Optical Properties of Nanocrystalline GeO 2 Films Made by Pulsed-Laser Deposition: Implications for Optical and Optoelectronic Applications

Germanium oxide (GeO 2 ) has great potential in multifunctional devices and next-generation power electronics due to its high thermal conductivity and ambipolar doping capability. However, the complexity of synthesizing the desirable polymorph with a controlled phase, surface/interface quality, microstructure, and functional properties is the main barrier to GeO 2 utilization in advanced applications. Here, in this regard, we present a method to realize the hexagonal (h) or a-quartz type GeO 2 with nano-textured surface morphology on sapphire substrates using a hybrid synthesis strategy that comprises pulsed laser deposition (PLD) and post-deposition thermal annealing. We performed a comprehensive study to investigate the effect of annealing temperature, which was varied in a wide range (600-1100 °C), on the crystal structure, phase, surface morphology, chemical stoichiometry, defect states, and optical properties of PLD-grown GeO 2 films. As-deposited GeO 2 films at 500 °C were amorphous. Upon annealing, the GeO 2 films induced an amorphous-to-crystalline phase transformation; GeO 2 films annealed at higher annealing temperatures (≥900 °C) stabilized in the hexagonal phase and demonstrated excellent crystal quality and chemical stability. Thermally activated growth process showed increased average crystallite size, which was varied in the range of 20-130 (±2) nm, while the surface roughness followed a similar trend. The spectral transmittance and band gap also increased with increasing annealing temperature. The resulting h-GeO 2 films, particularly those obtained at annealing temperatures in the 900-1100 °C range, had a higher band gap of 6.2-6.3 eV and displayed excellent optical transmittance in the visible region. Moreover, the absence of extended valence band maxima and reduced optical defect density support the quality improvement upon annealing. When considering phase-pure bulk and nanostructured GeO 2 as a possible candidate for ultra wide band gap semiconductors in cutting-edge technological applications, the results of the current work can be beneficial to realize high structural and optical quality a-quartz structured GeO 2 films.

GeO2↗
DOE OSTI2020

Structural Rearrangements of Subnanometer Cu Oxide Clusters Govern Catalytic Oxidation

Sub-nanometer metal oxide clusters are very important materials that are widely used, for example, in catalysis or electronic devices such as sensors. Hence, it is critical to understand the atomic structures and properties of sub-nanometer metal oxide clusters under a reactive gas environment, such as O 2 . We consider here experimentally accessible precise-size Cu clusters (Cu 4 ) supported on partially hydroxylated amorphous alumina and show that such clusters can access, in catalytic conditions at high temperature under a pressure of O 2 , a large ensemble of oxidized structures, representing a large variety of oxygen content, of geometries in link with the support, and of catalytic activities for oxidation reactions, as seen from their reducibilities. A grand canonical basin hopping method based on first-principles energy reveals an ensemble of 24 configurations for the Cu 4 O x cluster of low free energy, less than 0.8 eV above the global minimum. The low free energy ensemble consists of clusters of different stoichiometries, which are mainly Cu 4 O 3 and Cu 4 O 4 in the temperature range of 200–400 °C and under a pressure of 0.5 bar of O 2 . The presence of several competitive isomers at each composition implies that cluster fluxionality impacts the phase diagram, which should be ensemble-averaged. In terms of catalytic oxidation activity, Cu 4 O 3 isomers present highly variable O abstraction energy: the most stable isomers are inactive for alkane oxidative dehydrogenation, but isomerization to metastable isomers, that proceed with low barrier, enable to create active configurations with low O abstraction energy. O atoms with the lowest anionic character, and thus of more electrophilic nature, present the best oxidation capability. In contrast, all Cu 4 O 4 isomers show a low O abstraction energy and a high potential catalytic activity. Here, this manuscript demonstrates the unique structural and electronic properties of sub-nano Cu oxide clusters and illustrates the critical roles of configuration ensembles and rearrangement to highly reactive metastable cluster isomers in nanocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Kinetic Model for the Reduction of Cu II Sites by NO + NH 3 and Reoxidation of NH 3 -Solvated Cu I Sites by O 2 and NO in Cu-SSZ-13

In this work, a kinetic model is developed for the reduction of Cu II sites by NO + NH 3 and the reoxidation of NH 3 -solvated Cu I sites by O 2 and NO in Cu-SSZ-13. Fourier transform infrared (FTIR) spectroscopy and spatially resolved capillary inlet mass spectrometry (SpaciMS) measurements during transient reactor experiments are utilized to identify the rate parameters associated with NO + NH 3 RHC (reduction half-cycle), proposed to occur via two distinct pathways involving adsorbed NH 3 and gas-phase NH 3 . The resulting NO + NH 3 RHC model is validated using spatiotemporal N 2 measurements covering a wide range of temperatures (200–450 °C) and space velocities (53,000–640,000 h –1 ). N 2 O formation is observed and modeled during NO + NH 3 RHC, with quantitative validation under standard selective catalytic reduction (SCR) conditions. Experimentally measured enthalpic and entropic changes associated with O 2 adsorption on NH 3 -solvated Cu I (ZCu(NH 3 ) 2 ) complexes [ Kamasamudram, K. Catal. Today 2010 , 151 (3–4), 212-222], along with activation energies estimated computationally for the intercage diffusion of ZCu(NH 3 ) 2 complexes [ Paolucci, C. Science 2017 , 357 (6 354), 898-903], are incorporated into a mean field kinetic model for the low-temperature oxidation half-cycle (OHC). Significant NH 3 release is observed during the isothermal oxidation of Cu I sites, attributed to desorption of NH 3 ligands from NH 3 -solvated Cu II dimers (Z 2 Cu 2 (NH 3 ) 4 O 2 ). Reduction of these dimeric complexes leads to the consumption of one NO/Cu II , contradicting the expected reduction stoichiometry. Inclusion of a global Arrhenius rate for the NO titration of Z 2 Cu 2 (NH 3 ) 4 O 2 complexes provides accurate representations of standard SCR on reduced and oxidized catalysts, predicting transient NO and NH 3 consumption between 150 and 250 °C as a function of hydrothermal aging. Deactivation of low-temperature standard SCR by NH 3 is observed at high NH 3 pressures, modeled via the formation of superoxo amino (ZCu(NH 3 ) 3 OO*) complexes during NH 3 titration of Z 2 Cu 2 (NH 3 ) 4 O 2 complexes [ Negri, C. J. Am. Chem. Soc. 2020 , 142 (37), 15884-15896]. The redox kinetic model presented here provides a foundational description of active site redox during low-temperature standard SCR, combining the recent kinetic, spectroscopic, and computational findings on the mechanism of standard SCR over Cu-SSZ-13.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Recent Developments in Revealing the Impact of Complex Metal Oxide Reconstruction on Catalysis

Surface reconstruction of complex metal oxides refers to the alterations of the topmost catalyst surface, relative to the bulk structure, following exposure to pretreatment or reaction conditions during heterogeneous catalysis. (1) This structural and electronic transformation may involve (1) changes of the exposed crystallographic facets, (2) changes in chemical composition, such as the enrichment of specific elements, and, (3) morphological variations, including surface roughness and defects (Scheme 1). Beyond relaxation, surface reconstruction here also encompasses disruptions to the periodicity of the sublayers and changes to its stoichiometry. This change significantly influences the chemical properties of the catalyst surface, such as redox sites, (2) acid/base pairs, hydroxyl groups, (3) and surface defects. Surface reconstruction occurs due to the thermodynamic drive to lower the surface energy of the catalyst under the surrounding environment (e.g., temperature, chemical potential of species present). In addition to the treatment or reaction conditions, the extent of reconstruction also depends on the elements in the metal oxide structure. For instance, annealing ABO 3 perovskites (SrTiO 3 , BaTiO 3 , and BaZrO 3 ) at high temperatures (500 °C) in O 2 has a very different impact on the A/B ratio at the surface (ranging from 0.9 to 2.5), depending on the identity of A and B. (4) Metal oxide surface reconstruction under an electric field and exposure to acidic and alkaline media has recently gained increased attention in electrocatalysis, such as in the oxygen evolution reaction (OER); (5,6) however, in this Viewpoint we focus on the impact of surface reconstruction on thermal catalysis, a critical enduring research theme with ongoing challenges. Here, we start showcasing approaches to characterize surface reconstruction at the topmost surface layer, such as low-energy ion scattering (LEIS), discussing advantages and limitations. Next, we connect characterization of surface reconstruction to site-specific kinetic analysis, enabled via steady-state isotopic transient kinetic analysis (SSITKA), and we express our viewpoint on building structure–performance relationships by deeply understanding reconstructed surfaces. Later, we comment on the potential of tuning surface reconstruction to enhance catalytic performance. Finally, we explore the interplay between surface reconstruction and the “intelligent behavior”.

alcohol conversion↗
DOE OSTI2024

Unveiling the Electrocatalytic Hydrogen Evolution Reaction Pathway on RuP 2 through Ab Initio Grand Canonical Monte Carlo

In this study, the high catalytic reactivity of ruthenium phosphide (RuP 2 ) has been identified by first-principles density functional theory (DFT) calculations for the electrocatalytic hydrogen evolution reaction (HER). Complex surface reconstructions are considered by applying the ab initio grand canonical Monte Carlo (ai-GCMC) algorithm, efficiently providing a sufficient phase-space exploration of possible surfaces. Combined with surface-phase Pourbaix diagrams, we are able to identify the actual surfaces that obtained under specific experimental environments, thus leading to a more accurate understanding of the nature of the active sites and the binding strength of adsorbates. Specifically, through hundreds of surface reconstructions and hydrogenation states generated with ai-GCMC, we identify the most favorable surface phases of RuP 2 under aqueous acidic conditions. We discover that the HER activity is determined by multiple surfaces with different stoichiometries within a narrow electrode potential window. Low HER overpotential (η) has been found for each of the identified surfaces, as low as 0.04 V. High H-coverage reconstructed surfaces have been discovered under acidic conditions, and the surface Ru sites introduced by additional Ru adatoms or exposed by P-vacancies serve as the active sites for HER based on their nearly reversible H binding. Furthermore, this work provides atomistic insights into the origin of high HER activity on RuP 2 by exploring the dynamic surface phases of electrocatalysts and features a generalizable method to explore the reconstructed/hydrogenated surface space as a function of experimental conditions.

25 ENERGY STORAGE↗
DOE OSTI2025

Low Temperature CO 2 Hydrogenation on Unsupported Mo 2 C Catalysts

CO 2 hydrogenation to methanol, a key reaction for decarbonizing the fuel and chemical industries, requires catalyst formulations that hydrogenate CO 2 selectively to methanol at temperatures where methanol conversion is not significantly equilibrium limited (<423 K). Herein we report continuous CO 2 hydrogenation at low temperatures (348-408 K, H 2 /CO 2 = 0.1-50, 5-35 bar) with high selectivity to methanol (up to ca. 80%) over unsupported β-Mo 2 C catalysts. Active site density quantification via titration with trifluoroacetic acid at reaction temperatures enables an assessment of site-specific rates. Methanation and reverse water gas shift (RWGS) occur concurrently with methanol synthesis during CO 2 hydrogenation over Mo 2 C. Reaction pathway analysis, product cofeeds, and reversibility formalisms show that all products form through primary reaction pathways from CO 2 , but secondary reactions of CO contribute significantly to rates of methanation. Dependences of forward rates on reactant and product concentration determined by independently varying the CO 2 , H 2 , CO, H 2 O, CH 3 OH, and CH 4 pressure in conjunction with reversibility formalisms reveal that all products form through H-assisted CO 2 activation and involve partially hydrogenated CO 2 -derived intermediates. Here, these inferences were verified by quantitative agreement between measured site-time yields and site-time yields predicted by closed form kinetic rate expressions in an integral reactor model over widely varying conditions (85-2000 kPa H 2 , 80-1500 kPa CO 2 , 0-45 kPa H 2 O, 0-21 kPa CO, 0-25 kPa CH 3 OH, 0-75 kPa CH 4 , 5-87 mol Mo s s mol CO 2 -1 ). Coverages calculated based on the kinetic model reveal that the Mo 2 C surface is covered with bidentate CO- and CO 2 -derived intermediates of the stoichiometry H 2 CO 2 and H 2 CO, indicating that H 2 and CO x do not compete for surface occupancy but instead adsorb cooperatively to form partially hydrogenated intermediates. Hydrogenation of the CO-derived H 2 CO** intermediate favors methanation, while hydrogenation of CO 2 -derived H 2 CO 2 ** favors methanol synthesis. Together, these findings demonstrate the ability of unsupported Mo 2 C to catalyze the hydrogenation of CO 2 to methanol at low temperatures and provide insight into the reaction network and mechanisms involved in its formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Role of Surface Hydroxyls and Lattice Oxygen in Governing Selectivity and Restructuring During Acetic Acid Conversion on Fe 3 O 4 (001)

Understanding the reactivity of carboxylic acids on metal oxide surfaces is critical for elucidating ketonization mechanisms relevant to biomass upgrading. Here, we investigate the adsorption and thermal decomposition of acetic acid (CH 3 COOH) on Fe 3 O 4 (001) using scanning tunneling microscopy (STM), temperature-programmed reaction spectroscopy (TPRS), and X-ray photoelectron spectroscopy (XPS). At room temperature, acetic acid adsorbs dissociatively to form ordered bidentate acetate (CH 3 COO) overlayer that lifts the (√2 × √2)R 45° surface reconstruction. TPRS reveals ketene (CH 2 CO) as the dominant product, along with CO, CO 2 , and H 2 O, the latter evolving via a Mars–van Krevelen (MvK) mechanism. Isotopic labeling shows preferential CO 2 formation from the carboxyl carbon and a more balanced CO/CO 2 ratio from the methyl carbon, suggesting distinct oxidation pathways. STM imaging reveals embedded acetate intermediates filling surface oxygen vacancies created in MvK steps. Upon product formation completion (~700 K), extensive surface etching is observed, with pits elongated along the octahedral Fe rows. Approximately 20% of the surface oxygen is removed, consistent with vacancy formation stoichiometry inferred from product distributions. These findings demonstrate that carboxylate-induced restructuring of Fe 3 O 4 (001) involves both surface healing and reduction processes, offering mechanistic insights relevant to ketonization and broader carboxylic acid chemistry on metal oxides.

acetic acid↗
DOE OSTI2020

Mild and Selective Hydrogenation of Nitrate to Ammonia in the Absence of Noble Metals

Motivated by increased awareness about nitrate contamination of surface waters and its deleterious effects in human and animal health, we sought an alternative, non-noble metal catalyst for the chemical degradation of nitrate. First row transition metal phosphides recently emerged as excellent alternatives for hydrogen evolution and hydrotreating reactions. We demonstrate that a key member of this family, Ni 2 P, readily hydrogenates nitrate (NO 3 – ) to ammonia (NH 3 ) near ambient conditions with very high selectivity (96%). One of the few non-precious metal-based catalysts for this transformation, and among ca. 1% of catalysts with NH 3 selectivity, Ni 2 P can be recycled multiple times with limited loss of activity. Both nitrite (NO 2 – ) and nitric oxide (NO) intermediates are also hydrogenated. Density functional theory (DFT) indicates that—in the absence of a catalyst—nitrite hydrogenation is the reaction bottleneck. A variety of adsorbates (H, O, N, NO) induce surface reconstruction with top-layer Ni-rich surface stoichiometry. Critically, H saturation coverage on Ni 2 P(001) is only ca. 3 nm –2 , significantly less than that on Pd(111) and Ni(111) of ca. 15–18 nm –2 , which may play a key role in allowing coadsorption of NO x – . Here the ability of Earth-abundant, binary metal phosphides such as Ni 2 P to catalyze nitrate hydrogenation could transform and help us to better understand the basic science behind catalytic hydrogenation and, in turn, advance the next generation of oxyanion removal technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Elucidation of Active Oxygen Sites upon Delithiation of Li 3 IrO 4

Transformational increases in the storage capacity of battery cathodes could be achieved by tapping into the redox activity at oxide ligands in addition to conventional transition metal couples. However, the key signatures that govern such lattice oxygen redox (LOR) have not been ascertained. Li 3 IrO 4 has the largest reversible LOR, rendering it a unique model system. Here, X-ray spectroscopy and computational simulations reveal that LOR in Li 3 IrO 4 is selectively compensated via O sites with three lone pairs, which are activated by Li/Ir disorder. The two-electron LOR can be reversed to regenerate the initial state without unlocking competing bulk reactions observed in many other compounds. We uncover an intricate interplay between stoichiometry, O coordination, and nonbonding states in LOR and pinpoint spectroscopic signatures. This interplay is indispensable for designing materials with 3d metals that fulfill the promise of LOR to overcome the bottlenecks of current cathodes for future implementation in practical batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Coupling Redox Compensation and Interfacial Stabilization in Low-Ni O3-Type Sodium Layered Oxide Cathodes

Low-Ni O3-type sodium layered oxides are attractive cathodes for cost-robust sodium-ion batteries, yet high-voltage cycling is often limited by Fe-driven degradation, including cation migration/dissolution, irreversible slab gliding with large strain, particle cracking, and accelerated interfacial parasitic reactions. Here, in this study, we introduce a redox-interface codesign strategy using stoichiometric, charge-balanced Cu 2+ /Ti 4+ cosubstitution while preserving full Na stoichiometry, transitioning from NaNi 1/4 Fe 1/2 Mn 1/4 O 2 to NaNi 1/4 Fe 1/5 Mn 1/4 Cu 3/20 Ti 3/20 O 2 . With the cosubstitution, Cu and Ti suppress Fe migration and dissolution and facilitate sustained Fe oxidation at high voltage. Meanwhile, Cu is also shown to be redox-active, providing reversible cationic charge compensation that mitigates the capacity penalty typically associated with reducing Fe participation. Operando diffraction and spectroscopy collectively indicate a more reversible high-voltage structural evolution with suppressed Fe-related irreversibility. Particularly, spontaneous Ti enrichment at surface/grain-boundary regions stabilizes the cathode−electrolyte interface and promotes a more NaF-rich interphase signature. This work establishes a generalizable route to reconcile stability and capacity in low-Ni, Fe-containing O3 sodium layered oxide cathodes via compositionally encoded bulk-interfacial coupling.

25 ENERGY STORAGE↗
DOE OSTI2025

Modeling the Impacts of Hydrogen Extraction on Anaerobic Fermentation Systems Using a Modified ADM1 Model

Here, this paper presents a modified ADM1 (mADM1) model for use in assessing the influence of active dissolved H 2 extraction on biogas production from anaerobic fermentation reactors, specifically in the context of high-strength brewery wastewater as the feed. The modified model adds regulation factors to account for the varying product stoichiometry of glucose degradation reactions as a function of H 2 concentration in anaerobic digestion, and incorporates the use of both lactate and ethanol as intermediates. The changes to the model are expected to better predict the effects of H 2 removal on the production of H 2 in fermentation processes. Both ADM1 and mADM1 were calibrated against experimental data from a fluidized-bed reactor containing encapsulated acidogenic-acetogenic microbial communities treating real brewery wastewater. The calibrated models were validated against another fluidized-bed reactor identical to the calibration reactor, with the addition of a hollow-fiber membrane module that was used to reduce dissolved H 2 concentrations in the validation reactor. It was found that ADM1 over-estimated the H 2 production rates of the validation reactor (117 mL/day simulated vs. 16.48 mL/day experimental), whereas mADM1 was able to successfully predict fermentation, and specifically the H 2 production rate (17 mL/day). The presented model is a first step towards a model that can predict the effects of dissolved H 2 removal on fermentation processes.

Anaerobic Digestion↗
DOE OSTI2023

Thiol–ene Click Chemistry Incorporates Hydroxyl Functionality on Polycyclooctene to Tune Properties

Polyolefins compose the majority of plastic waste, but conventional mechanical recycling degrades their properties, thereby reducing their value. We report the functionalization of a model for dehydrogenated polyethylene, polycyclooctene (PCOE), with thiol–ene click chemistry to install pendant hydroxyl ethyl thioethers. Functionalization of PCOE using mercaptoethanol via thiol–ene click chemistry yielded functionalization between 1.4 and 22.9% based on ethylene monomeric units. Reactions were well-controlled by varying the reagent stoichiometry and reaction time. Crystallinity and melting temperature decreased, and glass transition temperature increased with greater functionalization. Contact angle measurements reveal an increase in surface polarity with functionalization. Here, comparisons with poly(ethylene-co-vinyl alcohol) (EVOH) show comparable surface polarity at similar levels of alcohol functionalization. At 12% functionalization, the ultimate shear stress (USS) of functionalized PCOE in an adhesive configuration is 4.10 ± 0.48 MPa, comparable to EVOH. At >12% functionalization, the failure mode changed from adhesive to mixed adhesive–cohesive, and the USS decreased.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Nitroarene Photoactivation Promotes Oxidative Deconstruction of Olefinic Polymers

Photoactivation of nitroarenes has been recently reported to induce the transformation of alkenyl bonds into carbonyl functionalities. Capitalizing on this unique photochemical mechanism, this study explores the use of nitroarenes to achieve oxidative cleavage of olefinic polymers under visible light irradiation. The degradation of various olefinic polymers, including commercially available polybutadiene, polynorbornene, both linear and cyclic poly(phenylacetylene), as well as backbone-modified polyacrylates with alkenyl functionality was investigated. To elucidate the efficacy of this methodology, a series of nitroarene derivatives bearing variable substituents were screened for their degradative efficiency on polybutadiene. Varying nitroarene stoichiometry, reaction temperature, and pos-treaction workup conditions were investigated to optimize degradation conditions. Furthermore, the results demonstrated that photoexcited nitroarenes enable efficient oxidative degradation of olefinic polymers in a safe and sustainable manner, providing a novel strategy for mild macromolecular deconstruction.

Bond cleavage↗
DOE OSTI2023

Combined First-Principles and Experimental Investigation into the Reactivity of Codeposited Chromium–Carbon under Pressure

High-pressure synthesis in the diamond anvil cell suffers from the lack of a general approach for the control of precursor stoichiometry and homogeneity. Here, we present results from a new method we have developed that uses magnetron cosputtering to prepare stoichiometrically precise and atomically mixed amorphous films of Cr:C. Laser-heated diamond anvil cell experiments carried out on a flake of this sample at pressures between 13.5 and 24.3 GPa lead to the observation of Cr 3 C (Pnma) over the entire pressure range–in good agreement with our in-house theoretical predictions–but also reveal two other metastable phases that were not expected: a novel monoclinic chromium carbide phase and the NaCl-type CrC (Fm3̅m) phase. The unexpected stability of CrC is investigated by using first-principles methods, revealing a large stabilizing effect tied to substoichiometry at the carbon site. These results offer an important case study into the current limitations of crystal structure prediction methods with regard to phase complexity and bolster the growing need for advanced theoretical approaches that can more completely survey experimentally unexplored phase space.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗