SEARCH · Engineering Papers

Results for “station”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Space Station - An integrated approach to operational logistics support

Development of an efficient and cost effective operational logistics system for the Space Station will require logistics planning early in the program's design and development phase. This paper will focus on Integrated Logistics Support (ILS) Program techniques and their application to the Space Station program design, production and deployment phases to assure the development of an effective and cost efficient operational logistics system. The paper will provide the methodology and time-phased programmatic steps required to establish a Space Station ILS Program that will provide an operational logistics system based on planned Space Station program logistics support.

Hosmer, G. J.↗

NASA NTRS1986

An exact solution for orbit view-periods from a station on a tri-axial ellipsoidal planet

This paper presents the concise exact solution for predicting view-periods to be observed from a masked or unmasked tracking station on a tri-axial ellipsoidal surface. The new exact approach expresses the azimuth and elevation angles of a spacecraft in terms of the station-centered geodetic topocentric coordinates in an elegantly concise manner. A simple and efficient algorithm is developed to avoid costly repetitive computations in searching for neighborhoods near the rise and set times of each satellite orbit for each station. Only one search for each orbit is necessary for each station. Sample results indicate that the use of an assumed spherical earth instead of an 'actual' tri-axial ellipsoidal earth could introduce an error up to a few minutes in a view-period prediction for circular orbits of low or medium altitude. For an elliptical orbit of high eccentricity and long period, the maximum error could be even larger. The analytic treatment and the efficient algorithm are designed for geocentric orbits, but they should be applicable to interplanetary trajectories by an appropriate coordinates transformation at each view-period calculation. This analysis can be accomplished only by not using the classical orbital elements.

Tang, C. C. H.↗

NASA NTRS1986

Power conditioning subsystems for photovoltaic central-station power plants - State-of-the-art and advanced technology

An overview is given of the technical and near-term cost requirements that must be met to develop economically viable power conditioning subsystems (PCS) for large-scale, central photovoltaic power stations. Various commercially available PCS hardware suitable for use in today's central photovoltaic power stations are also surveyed. Federal and industrial activities in the research and development of advanced PCSs that will contribute to the attainment of fully competitive, large-scale photovoltaic power stations are reviewed. The status of the DOE central station PCS program is discussed.

Bulawka, A.↗

NASA NTRS1986

Space Station and technology experiments

The space technology experiments to be performed on the Space Station are discussed. The characteristics of the dual keel Station, which contains modules for habitation, logistics, and laboratories, applicable to technology experiments are described. Experiments utilizing the initial Space Station design include: (1) assessing the instrumented Space Station, (2) the testing of spacecraft materials and coatings, and (3) a microelectronics data system experiment; the objectives and procedures for these studies are examined. With increases in the number of modules, and electrical power and OTV capabilities, the evaluation of teleoperated techniques, the development and testing of a diversified antenna near- and far-field measurement facility, the study of cryogenic propellant transfer, and storage, and the implementation of a large concentrator in space are possible; descriptions of these proposed experiments are provided.

Breckenridge, R. A.↗

NASA NTRS1986

The space station: Human factors and productivity

Human factor researchers and engineers are making inputs into the early stages of the design of the Space Station to improve both the quality of life and work on-orbit. Effective integration of the human factors information related to various Intravehicular Activity (IVA), Extravehicular Activity (EVA), and teletobotics systems during the Space Station design will result in increased productivity, increased flexibility of the Space Stations systems, lower cost of operations, improved reliability, and increased safety for the crew onboard the Space Station. The major features of productivity examined include the cognitive and physical effort involved in work, the accuracy of worker output and ability to maintain performance at a high level of accuracy, the speed and temporal efficiency with which a worker performs, crewmember satisfaction with their work environment, and the relation between performance and cost.

Gillan, D. J.↗

NASA NTRS1987

Structural dynamics and attitude control study of early manned capability space station configurations

A study was performed to determine the vibration and attitude control characteristics of critical space station configurations featuring early manned capability during buildup from initial user support through the operations capability reference station. Five configurations were selected and were examined thus determining the changes that are likely to occur in the characteristics of the system as the station progresses from a single boom structure to a mature, dual keel, operations capability reference station. Both 9 foot and 5 meter truss bay sizes were investigated. All configurations analyzed were stable; however, the 5 meter truss bay size structure exhibited superior stability characteristics.

Ayers, J. Kirk↗

NASA NTRS1986

Solar terrestrial and plasma processes experiments on space station

The currently planned utilization of the space station to perform investigations in solar terrestrial physics and plasma physics is outlined. The investigations and instrumentation planned for the Solar Terrestrial Observatory and its associated space station accommodation requirements are described. In addition, the planned placement of the Solar Terrestrial Observatory instruments are discussed along with typical operational scenarios. In the area of plasma physics, some preliminary plans for scientific investigations and for the accommodation of a plasma physics facility attached to the space station called the Plasma Processes Laboratory are outlined. These preliminary experiment concepts use the space environment around the space station as an unconfined plasma laboratory.

Roberts, W. T.↗

NASA NTRS1987

Conceptual design and integration of a space station resistojet propulsion assembly

The resistojet propulsion module is designed as a simple, long life, low risk system offering operational flexibility to the space station program. It can dispose of a wide variety of typical space station waste fluids by using them as propellants for orbital maintenance. A high temperature mode offers relatively high specific impulse with long life while a low temperature mode can propulsively dispose of mixtures that contain oxygen or hydrocarbons without reducing thruster life or generating particulates in the plume. A low duty cycle and a plume that is confined to a small aft region minimizes the impacts on the users. Simple interfaces with other space station systems facilitate integration. It is concluded that there are no major obstacles and many advantages to developing, installing, and operating a resistojet propulsion module aboard the Initial Operational Capability (IOC) space station.

Tacina, Robert R.↗

NASA NTRS1987

Optimization of payload mass placement in a dual keel space station

In order to keep a Space Station in a stable low-Earth orbit, angular momentum storage and translational attitude control systems will have to be used. In order to minimize the size of these attitude control systems, the induced gravity gradient torque effects will have to be minimized. This can be done by minimizing the cross-products of inertia of the Station through the management of payload placement with the Station geometry. A derived and automated methodology is presented which utilizes mathematical nonlinear programming techniques. An optimal arrangement of a set of five payloads on a Dual Keel Space Station was found that minimized the cross products of inertia and thus the required controllability resources.

Ferebee, Melvin J., Jr.↗

NASA NTRS1987

Space station experiment definition: Long-term cryogenic fluid storage

The conceptual design of a space station Technology Development Mission (TDM) experiment to demonstrate and evaluate cryogenic fluid storage and transfer technologies is presented. The experiment will be deployed on the initial operational capability (IOC) space station for a four-year duration. It is modular in design, consisting of three phases to test the following technologies: passive thermal technologies (phase 1), fluid transfer (phase 2), and active refrigeration (phase 3). Use of existing hardware was a primary consideration throughout the design effort. A conceptual design of the experiment was completed, including configuration sketches, system schematics, equipment specifications, and space station resources and interface requirements. These requirements were entered into the NASA Space Station Mission Data Base. A program plan was developed defining a twelve-year development and flight plan. Program cost estimates are given.

Jetley, R. L.↗

NASA NTRS1987

Geoid undulation computations at laser tracking stations

Geoid undulation computations were performed at 29 laser stations distributed around the world using a combination of terrestrial gravity data within a cap of radius 2 deg and a potential coefficient set up to 180 deg. The traditional methods of Stokes' and Meissl's modification together with the Molodenskii method and the modified Sjoberg method were applied. Performing numerical tests based on global error assumptions regarding the terrestrial data and the geopotential set it was concluded that the modified Sjoberg method is the most accurate and promising technique for geoid undulation computations. The numerical computations for the geoid undulations using all the four methods resulted in agreement with the ellipsoidal minus orthometric value of the undulations on the order of 60 cm or better for most of the laser stations in the eastern United States, Australia, Japan, Bermuda, and Europe. A systematic discrepancy of about 2 meters for most of the western United States stations was detected and verified by using two relatively independent data sets. For oceanic laser stations in the western Atlantic and Pacific oceans that have no terrestrial data available, the adjusted GEOS-3 and SEASAT altimeter data were used for the computation of the geoid undulation in a collocation method.

Despotakis, Vasilios K.↗

NASA NTRS1986

Space Station ground processing

The architecture of the Station, the system requirements, and the operational capabilities for ground and flight operations are described. The proposed Space Station design is dual keel and the components of the Station are listed. The initial ground processing activities are to reflect the on-orbit assembly sequence; the four phases of the assembly are examined. The planning and analysis for the ground processing of the Station with an emphasis on cost are discussed. The logistics resupply elements aspect of the ground processing sequence is considered. An example testing the capabilities of the ground processing sequence is presented. Diagrams of the Shuttle, its modules, and ground facilities and equipment are provided.

Scully, E. J.↗

NASA NTRS1986

The Space Station program

Cost constraints to a large degree control the functionality and form of the IOC of the Space Station. Planning of Station missions must be delayed to retain flexibility, a goal also served by modular development of the Station and by multi-use laboratory modules. Early emphasis on servicing other spacecraft is recommended, as is using available Shuttle flight time for R&D on Space Station technologies and operations.

Hinners, N. W.↗

NASA NTRS1986

U.S. experience in satellite servicing and linkage to the Space Station era

A history of on-orbit servicing and repair is given with emphasis placed on the Solar Maximum Repair Mission. The experience gained thus far in on-orbit servicing and the design of the Space Station's servicing capabilities impose the following requirements on users: (1) satellites must have a standard grapple for capture and a standard berthing interface, (2) Space Station safety requirements must meet to preclude damage to the Space Station or injury to the EVA crew, (3) sensitive instruments will need to implement remotely controlled protective devices to prevent damage, and (4) satellite thermal systems must be designed to maintain survival temperatures during transfer from orbit to the Space Station servicing facility.

Browning, R. K.↗

NASA NTRS1986

Space Station design for growth

This paper reviews the current status of Space Station planning for growth as the basis of an assessment of potential Space Station evolution directions in the 21st Century to meet the challenges of the report of the U.S. National Commission on space, 'Pioneering the Space Frontier'. Thus future mission requirements are reviewed and assessed. Based on these requirements, evolution scenarios and potential configurations are developed. It is concluded that the Space Station, as a multipurpose facility, should evolve to a capability of 300 kW, crew of 18 and 5 lab modules. Beyond this capability it will be necessary to separate functions and establish two separate Space Stations, one for research and one for operational activities (e.g., transportation node, servicing, etc.). If the U.S. National Commission on space's recommendations are adopted, this separation or 'branching' could occur as early as 2005 to meet the needs of a permanent lunar base.

Pritchard, E. B.↗

NASA NTRS1987

Space Station initiates permanent space facility development

The proposed development of the Space Station is examined. The functions and advantages of the Space Station are described. The use of a solar array system for power generation on the Station is studied; the capabilities of various other generation systems are also evaluated. The Space Station's development schedule is discussed.

Loftus, Joseph P., Jr.↗

NASA NTRS1987

Dynamic and attitude control characteristics of an International Space Station

The structural dynamic characteristics of the International Space Station (ISS), the interim reference configuration established for NASA's Space Station developmental program, are discussed, and a finite element model is described. Modes and frequencies of the station below 2.0 Hz are derived, and the dynamic response of the station is simulated for an external impulse load corresponding to a failed shuttle-docking maneuver. A three-axis attitude control system regulates the ISS orientation, with control moment gyros responding to attitude and attitude rate signals. No instabilities were found in the attitude control system.

Sutter, Thomas R.↗

NASA NTRS1987

Space Station data management system architecture

Within the Space Station program, the Data Management System (DMS) functions in a dual role. First, it provides the hardware resources and software services which support the data processing, data communications, and data storage functions of the onboard subsystems and payloads. Second, it functions as an integrating entity which provides a common operating environment and human-machine interface for the operation and control of the orbiting Space Station systems and payloads by both the crew and the ground operators. This paper discusses the evolution and derivation of the requirements and issues which have had significant effect on the design of the Space Station DMS, describes the DMS components and services which support system and payload operations, and presents the current architectural view of the system as it exists in October 1986; one-and-a-half years into the Space Station Phase B Definition and Preliminary Design Study.

Mallary, William E.↗