Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solution processable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Size- and concentration-dependent Eu 2+ /Eu 3+ mixed luminescent characteristics of rare-earth-doped CaF 2 nanoparticles and their monolithic epoxy nanocomposites

CaF 2 is a promising luminescent host material for a wide range of applications, due to its high transparency, non-hygroscopy, low refractive index, low density, low backscattering efficiency, and abundance in nature. Here we report the photoluminescence (PL) and cathodoluminescence (CL) characteristics of rare-earth-doped CaF 2 nanoparticles and their composite monoliths with epoxy with visible emissions. The CaF 2 nanoparticles of ca. 36, 108 and 305 nm were prepared by a facile solution-mixing process and subsequent hydrothermal treatment. As the particle size decreases, the luminescence intensity increases for single-doped particles, while oppositely decreases for codoped particles because of energy transfer. Further, Eu 2+ - and Tb 3+ -codoped CaF 2 nanoparticles exhibit red emission, providing an efficient path for red emission through an energy transfer by Tb 3+ bridging without direct Eu 3+ doping. The effects of size and concentration are found to be pronounced in CL than PL, as the charge transfer between Eu 2+ and Eu 3+ reduces the concentration quenching in CL. The luminescence emission characteristics of epoxy/CaF 2 monoliths are different from those of particles due to the interactions with the epoxy molecules, and thus the energy transfer is hindered in PL while not in CL, enabling them for high-energy irradiation applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Comparison of continuum and cross-core theories of dynamic strain aging

Dynamic strain aging (DSA) is the process of solute atoms segregating around dislocations on the timescale of loading. Continuum theories of DSA derived from elasticity theory have been shown to severely overpredict both the timescale and strengthening of DSA. Recently, cross-core theory was developed to reconcile this gap, invoking a special single-atomic-hop diffusion mechanism across the core of an extended dislocation. In this work, we show that the classical continuum theory expression for the rate of solute segregation is in error. After correcting this error, we show that continuum theory predictions match cross-core theory when the elevated diffusivity near the dislocation core is accounted for. Finally, our findings indicate that continuum theory is still a useful tool for studying dislocation-solute interactions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Butyltin Keggin Ion with a Rare Four-Coordinate Ca Center

Alkyltin clusters are exploited in nanolithography for the fabrication of microelectronics. The alkyltin Keggin family is unique among Keggin clusters across the periodic table; its members appear to favor the lower-symmetry β and γ isomers rather than the highly symmetrical α and ε isomers. Therefore, the alkyltin Keggin family may provide important fundamental information about the formation and isomerization of Keggin clusters. In this study, we have synthesized and structurally characterized a new butyltin Keggin cluster with a tetrahedral Ca 2+ center, fully formulated [(BuSn) 12 (CaO 4 )(OCH 3 ) 12 (O) 4 (OH) 8 ] 2+ (β-CaSn 12 ). The synthesis is a simple one-step process. Extensive solution characterization including electrospray ionization mass spectrometry, small-angle X-ray scattering, and multinuclear ( 1 H, 13 C, and 119 Sn) nuclear magnetic resonance shows β-CaSn 12 is essentially phase-pure and stable. This differs from the previously reported Na-centered analogues that always form a mixture of β and γ isomers, with facile interconversion. Therefore, this study has clarified prior confusion over complex spectroscopic and crystallographic characterization of the Na-centered analogues. Density functional theory calculations showed the following stability order: γ-CaSn 12 < γ-NaSn 12 < β-CaSn 12 < β-NaSn 12 . The β analogue is always more stable than the γ analogue, consistent with experiment. Notable outcomes of this study include a rare tetrahedral Ca coordination, a Na-free alkyltin cluster (important for microelectronics manufacturing), and a better understanding of Keggin families built of different metal cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Atomic Edge-Guided Polyethylene Crystallization on Monolayer Two-Dimensional Materials

In this report we combine an advanced synthesis of two-dimensional (2D) materials (MoSe 2 ) having well-defined atomic edge configurations with ab initio and atomistic molecular dynamics (MD) simulations to study how atomic edges interact with polyethylene (HDPE) chains in a dilute solution assembly process. Our results reveal that Mo-terminated zigzag (Mo-ZZ) edges act as preferred nucleation sites and strongly interact with HDPE chains. The HDPE chains align in parallel with the Mo-ZZ edges and form arrays of lamellae that are perpendicular to the edges. Interestingly, atomic edge configurations are observed to dramatically change such interactions. The crystallization discrepancy at different edges was demonstrated on the same piece of MoSe 2 with different types of edges. The ab initio and MD simulations between n-alkane (n = 5 and 25), a segment of HDPE, and MoSe 2 suggest that the atomic structures of MoSe 2 can affect their interactions with n-alkane chains. Following the Mo-ZZ edge preferred nucleation principle, controlled long-range alignment of HDPE lamellae can be realized by creating multilayer MoSe 2 with parallel atomic steps. This research opens a pathway toward an atomic level understanding of polymer–2D nanomaterial interactions. It also bridges the gap between atomic-level and long-range mesoscopic structures and introduces a novel strategy for long-range structural control.

36 MATERIALS SCIENCE↗
DOE OSTI2020

NMR Studies of Block Copolymer-Based Supramolecules in Solution

Hierarchical assemblies from block copolymer (BCP)-based supramolecules have shown immense potential as programmable materials owing to their versatility for incorporating functional molecules and provide access to arrays of hierarchical structures. However, there remains a knowledge gap on the formation of the supramolecule in solution. Here, we applied NMR techniques to investigate the solution-phase behavior of the most studied supramolecular systems, polystyrene-block-poly(4-vinylpyridine)(3-pentadecylphenol) (PS-b-P4VP(PDP) r ). The results show that the supramolecule likely adopts a coil-comb conformation, despite the small molecule's (PDP) rapid exchange between the bonded and free states. The exchange rate (>10 4 s -1 ) exceeds the NMR time scale at the frequency of interest. The supramolecules form under dilute conditions (~2 vol %) and are attributed to the enthalpic gain of the hydrogen bonding between the PDP and 4VP. As the solute concentration increases (>10 vol %), the supramolecule forms micelle-like aggregates with PDP accumulated within the comb-block's pervaded volume based on analysis of the apparent molecular weight, viscosity, and chain dynamics. Overall, this work sheds light on the long-standing question regarding the evolution of the constituents in the BCP-based supramolecule in solution and provides valuable guidance toward their solution-based processing and morphological control.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Characterization of the ALSEP Process at Equilibrium: Speciation and Stoichiometry of the Extracted Complex

We have determined the identity of the complexes extracted into the ALSEP process solvent from solutions of nitric acid. The ALSEP process is a new solvent extraction separation designed to separate americium and curium from trivalent lanthanides in irradiated nuclear fuel. ALSEP employs a mixture of two extractants, 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) and N,N,N',N'-tetra(2-ethylhexyl)diglycolamide (TEHDGA) in n-dodecane, which makes it difficult to ascertain the nature of the extracted metal complexes. It is often asserted that the weak acid extractant HEH[EHP] does not participate in the extracted complex under ALSEP extraction conditions (2–4 M HNO 3 ). However, the analysis of the Am extraction equilibria, Nd absorption spectra, and Eu fluorescence emission spectra of metal-loaded organic phases argues for the participation of HEH[EHP] in the extracted complex despite the high acidity of the aqueous phases. The extracted complex was determined to contain fully protonated molecules of HEH[EHP] with an overall stoichiometry of M(TEHDGA) 2 (HEH[EHP]) 2 ·3NO 3 . Computations also demonstrate that replacing one TEHDGA molecule with one (HEH[EHP]) 2 dimer is likely energetically favorable compared to Eu(TEHDGA) 3 ·3NO 3 , whether the HEH[EHP] dimer is monodentate or bidentate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Hydrological and Thermal Dynamics of a Supra‐Permafrost Subterranean Estuary

Subterranean estuaries (STEs), where groundwater interacts with seawater, influence surface and subsurface coastal ecology and biogeochemistry. In Arctic-STEs overlying permafrost, groundwater flow and heat transport determine the fate of organic matter. Yet, direct observations of groundwater flow and heat and solute transport processes in Arctic STEs remain limited. This study characterized groundwater flow paths and fluxes and heat transport within an Arctic-STE along Alaska's Beaufort Sea coast during thawing, summer, and freeze-up. Intertidal seabed temperature-depth profiles collected along a 10-m transect captured the active groundwater flow period, from thaw and flow onset in mid-June to freeze-up in late-September. During this period, aquifer geometry evolved non-uniformly due to spatially varying thaw rates across the STE (mean (m) thaw depths–beach: 0.25 to 0.55–0.6 m on 20 June, 25 July, 1 October; seabed: 0.6–0.9 m from 25 July to 1 October). Groundwater and surface water levels, salinity, and subsurface temperature profiles measured over tidal time scales were interpreted alongside groundwater flow-heat transport numerical simulations. Fresh groundwater discharge was sporadic during thawing (m: 0.32 m 3 /day/m), abundant in summer (m: 0.45 m 3 /day/m), and was largely absent during freeze-up. During freeze-up, groundwater flow was driven exclusively by seawater recirculation via tidal pumping (from thawing to summer to freeze-up: 0.00025–0.15–0.5 m3/day/m) and convection. Heat advection dominated near aquatic interfaces (shaping intertidal ice), and conduction controlled vertical temperature gradients in low-flow and unsaturated sediments. These findings will help predict how prolonged summers will alter Arctic-STE cryo-hydrology and biogeochemistry.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Flexible organic integrated electronics for self-powered multiplexed ocular monitoring

Smart contact lens has drawn extensive research interests due to the noninvasive real-time detection of the human body to provide biomedical information for health management. However, it has been difficult to accurately measure the physiological signals in tears, and the use of external power source has also hindered the future applications. Here, we demonstrated an organic electrochemical transistor based multiplexed sensors self-powered by the organic solar cells (OSCs). The integrated device was fabricated via simple process including solution blade-coating and thermal evaporation. OSCs were optimized to provide optimal operation voltage for the sensors that exhibit semilog-linear response to the glucose and calcium ions in tear fluids without any peripheral circuits. The sensing signals can be transmitted to the laptop wirelessly through a near filed communication unit. This integrated self-powered multiplexed sensing device will provide real-time monitoring of the biomarkers in tears, prospected to be installed on the smart contact lens for the early detection and diagnosis of diabetes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Dry electrodes with a printed cellulose–graphene ink for low-profile strain sensors in electromyography

Dihydrolevoglucosenone, commonly known as Cyrene, is a renewable and fully biodegradable cellulose-waste derived, environmentally friendly solvent, presenting a non-toxic alternative to N-methyl-2-pyrrolidone (NMP). Currently, solution-based processing of graphene and other similar van der Waals solids favor toxic solvents such as NMP, limiting their use for biosensing. However, with the use of Cyrene, bio-compatible printable devices are possible, and studies have already demonstrated its use in temperature and other biosensing methods through screen-printing. Screen-printing unfortunately often requires masks that constrain the minimum acquirable feature size to be above hundreds of centimeters and wastes material, adding to process complexity and cost. Conversely, inkjet-printing is an attractive alternative for the maskless patterning of hierarchically assembled structures, with micron length scales attainable. Graphene's high conductivity positions it ideally for long-wear sensors such as dry electrodes or respiration monitors. Here, we demonstrate the potential of Cyrene-based graphene inks through few-layer inkjet printing on flexible substrates for the first time, to produce non-toxic conductors toward a strain-mediated mechanism for biosensing, used to detect bodily motion for wearable electronics. The challenges overcome in this study include engineering ink chemistry and printing parameters such that Cyrene's relatively high viscosity compared to typical inkjet solvents, still allows for droplet ejection in a conventional material printer, yielding well-resolved clean line-edges in contrast to other solvents that exhibit diffuse line-edges possibly from stray droplets and ink-splashing. Temperature-dependent transport measurements on the inkjet-printed Cyrene-based graphene films showed the conductivity to be largely temperature-invariant but at lower temperatures below 100 K, conductivity decreased, likely as a result of increased inter-membrane separation arising from thermal contraction. Additionally, temperature-dependent Raman spectroscopy showed the red-shift in the G-band, 2D-band and D-band peaks, as temperature increased. As a result, by validating flexion motion detection of the proximal interphalangeal joint demonstrated in this study, our work is the first of its kind to successfully additively manufacture inkjet-printed Cyrene-based graphene strain sensors on flexible substrates for bio-sensing and wearables.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Enabling ITO-free perovskite solar cells through n-doped poly(benzodifurandione) (n-PBDF) electrodes

The burgeoning commercialization of perovskite solar cells (PSCs) is propelled by their exceptional power conversion efficiency (PCE), enhanced stability, and ease of fabrication. However, the rigidity of mainstream transparent conductive oxides (TCOs) limits the adaptability of PSCs to various application scenarios. Although alternative materials such as silver nanowires, carbon nanotubes, graphene, and PEDOT:PSS have been evaluated, the p-type nature confines their device designs to inverted architecture and restricts broader applicability. Here, for the first time, a conducting polymer electrode based on n-doped poly(benzodifurandione) (n-PBDF) was used to replace TCOs in PSCs. The n-PBDF electrodes can be readily fabricated via low-temperature, solution-based processes, indicating substantial potential for reducing manufacturing costs. Furthermore, its integration into PSCs has negligible effect on the phase, morphology, or photophysical properties of the perovskite layer, which is comparable to the typical TCOs. After optimization, the n-PBDF-based device achieves a power conversion efficiency of 12.70 and 11.23%, for rigid and flexible devices, respectively. Our study provides a promising alternative to the widely used TCOs in PSCs, highlighting the advantages of using n-doped conducting polymers in terms of processability and flexibility.

Kumar, Prashant [Purdue University, West Lafayette↗
DOE OSTI2025

Rigid cationic ligands enable high-efficiency NIR-II photoluminescence in copper( i ) iodide hybrid semiconductors

Near-infrared (NIR) luminescent materials are pivotal for advanced optoelectronic and biomedical applications, yet attaining efficient emission in the NIR-II region (950-1400 nm) remains challenging. Here, we introduce a ligand cationization strategy for designing copper(i) iodide-organic hybrid materials that emit in the NIR-II region (920-1120 nm) with PLQYs up to 8.58%. By incorporating rigid cationic ligands with CuI modules, we synergistically achieve bandgap narrowing (to 1.51 eV) and structural rigidification via ionic-dative bonding, effectively suppressing non-radiative decay while extending emission beyond 1100 nm. Coupled with solution processability-enabled by the successful synthesis of nanometer-sized nanoparticles in various shapes-and excellent thermal stability (≥210 °C), this work establishes ligand cationization as a universal approach for designing efficient NIR-II emitters.

Chen, Jingwen↗
DOE OSTI2020

Photodissociation of aqueous I3− observed with liquid-phase ultrafast mega-electron-volt electron diffraction

Developing femtosecond resolution methods for directly observing structural dynamics is critical to understanding complex photochemical reaction mechanisms in solution. We have used two recent developments, ultrafast mega-electron-volt electron sources and vacuum compatible sub-micron thick liquid sheet jets, to enable liquid-phase ultrafast electron diffraction (LUED). We have demonstrated the viability of LUED by investigating the photodissociation of tri-iodide initiated with a 400 nm laser pulse. This has enabled the average speed of the bond expansion to be measured during the first 750 fs of dissociation and the geminate recombination to be directly captured on the picosecond time scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Generalized spin σ -SCF method

We introduce a generalization of the σ-SCF method to approximate noncollinear spin ground and excited single-reference electronic states by minimizing the Hamiltonian variance. The new method is based on the σ-SCF method, originally proposed by Ye et al. [J. Chem. Phys. 147, 214104 (2017)], and provides a prescription to determine ground and excited noncollinear spin states on an equal footing. Our implementation was carried out utilizing an initial simulated annealing stage followed by a mean-field iterative self-consistent approach to simplify the cumbersome search introduced by generalizing the spin degrees of freedom. The simulated annealing stage ensures a broad exploration of the Hilbert space spanned by the generalized spin single-reference states with random complex element-wise rotations of the generalized density matrix elements in the simulated annealing stage. The mean-field iterative self-consistent stage employs an effective Fockian derived from the variance, which is utilized to converge tightly to the solutions. This process helps us to easily find complex spin structures, avoiding manipulating the initial guess. As proof-of-concept tests, we present results for Hn (n = 3–7) planar rings and polyhedral clusters with geometrical spin frustration. We show that most of these systems have noncollinear spin excited states that can be interpreted in terms of geometric spin frustration. These states are not directly targeted by energy minimization methods, which are meant to converge to the ground state. This stresses the capability of the σ-SCF methodology to find approximate noncollinear spin structures as mean-field excited states.

Chemistry↗
DOE OSTI2020

Cryogenic and Temperature-Dependent Photoelectron Spectroscopy of Metal Complexes

Negative ion photoelectron spectroscopy (NIPES) coupled with electrospray ionization (ESI) has been proved to be a powerful gas-phase spectroscopic tool for characterizing electronic structures and chemical bonding of a variety of cluster anions and corresponding neutral radicals involved in the condensed phase reactions and transformations. Since the acquisition of cryogenic and temperature-controlling capabilities, broader range of research scope has been covered. This review summarizes our recent investigations on metal complexes employing cryogenic ESI-NIPES that provide us essential information towards understanding complicated condensed phase reactions including hydrocarbon activations and electron transfer reactions, and afford us spectroscopic probe of highly reactive transient species and intimate redox pairs. Special attention has been drawn to connect gas phase photodetachment processes with solution phase redox reactions. Photodetachment of transition metal-EDTA complexes has been systematically investigated to model the sequential oxidation reactions of these species in solutions. The obtained gas phase electron affinity (EA) is compared with the solution redox potential (E1/2) and the metal ionization potential (IP) for several series of homologous metal complexes to emphasize their intrinsic correlations with deviations being largely modulated by different degrees of ligand participations.

Yuan, Qinqin↗
DOE OSTI2024

Approaches for the Simulation of Coupled Processes in Evolving Fractured Porous Media Enabled by Exascale Computing

Models have historically represented fractured porous media with continuum descriptions that characterize the media using bulk parameters. The impact of small-scale features is not captured in these models, although they may be controlling the performance of subsurface applications. Pore-scale models can simulate processes in small-scale features by representing the pore space geometry explicitly but are computationally expensive for large domains. The alternative multiscale approach entails the combination of pore-scale and continuum-scale descriptions in a single framework. We use Chombo-Crunch, a computational capability that discretizes complex geometries with an adaptive, embedded boundary method to contrast these two approaches. Chombo-Crunch takes advantage of recent computational performance and memory bandwidth improvements resulting from the emergence of exascale computing resources. These combined improvements enable the efficient simulation of reactive transport in fractured media with a high degree of fidelity and the ability to capture the control small-scale processes exert on the overall medium evolution.

42 ENGINEERING↗
DOE OSTI2021

Copper Electrode on Flexible Substrate by Intense Pulsed Light Sintering of Microsized Copper Particles

Metal electrodes deposited in a grid pattern onto flexible polymer substrates have been shown to be a viable alternative to replace indium tin oxide (ITO) as the transparent anode for organic photovoltaics. copper may be a better alternative in terms of cost and stability for large area low-cost solar modules, specifically on roll-to-roll platforms. These customized electrode patterns can be fabricated from copper nanoparticles through various printing techniques applicable to solution phase processing. The Intense Pulsed Light (IPL) technique has been used to sinter copper nanoparticles (~100nm) to fabricate conductive copper electrodes on flexible polymer substrates. However, compared to nanosized (~100 nm) copper particles, microsized (~2 um) copper is much cheaper. In this work, microsized (~2 um) copper is used to produce high conductive copper inks. The conductivity of the print can be adjusted through the use of surfactant. IPL sintering was optimized to obtain high conductivity copper films. In conclusion, several microscopic and electrical spectroscopic characterization techniques such as scanning electron microscopy (SEM), x-ray diffraction (XRD), 4-point probe resistivity measurements were employed to characterize the copper electrodes.

14 SOLAR ENERGY↗
DOE OSTI2024

Isotropic negative thermal expansion in ZrW 2 O 8 and HfW 2 O 8 from 1100 to 1275°C

Abstract ZrW 2 O 8 (ZrO 2 •2WO 3 ) and HfW 2 O 8 (HfO 2 •2WO 3 ) have been the focus of thermal expansion studies due to their isotropic negative thermal expansion (NTE) measured previously at temperatures below 775°C. This work presents measurements of these materials at their thermodynamically stable temperature ranges of 1105 and 1257°C for ZrW 2 O 8 and 1105–1276°C for HfW 2 O 8 , where they were characterized with in situ, powder X‐ray diffraction. The linear coefficients of thermal expansion were measured to be −5.52 × 10 −6 and −4.87 × 10 −6 °C −1 for ZrW 2 O 8 and HfW 2 O 8 , respectively. The mechanism leading to this NTE is discussed. Powder samples were synthesized by a solution‐based process called the organic–inorganic steric entrapment method. In situ characterization in air was carried out at the National Synchrotron Light Source II using a hexapole lamp, optical furnace and the Advanced Photon Source using a quadrupole lamp, optical furnace to achieve elevated temperatures.

Materials Science↗
DOE OSTI2024

Mesofluidic Oil-Water Separation

Separating flowing multiphase solutions in process at industrial scale is challenging. A rapid continuous approach is desired. These mesofluidic oil-water separation tests were motivated by reports by Dijkshoorn et al [1] who reported separating droplets and particles using displacement with regularly spaced channels using a cross-flow microsieve.. Droplets, including deformable particles, larger than the channel migrate in one direction and thereby deplete in the other direction. Test flowrates were motivated by Burns et al. [4] who showed that separation could occur under laminar conditions, and Pease et al [8, 9] who extended the range to turbulent flow. Testing was conducted using two two-component oil-water mixtures at room temperature. Analysis showed separation of both mineral oils from their oil water mixtures at flowrates from 1-2 L/min and concentrations from 2-10 wt% oil in water.

cloud height, effective cleaning radius, effective↗