Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “slit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

NASA Ames-Dryden T-37 demonstration comments

A homemade peripheral vision horizon device (PVHD) made from an eight-ball attitude indicator, with a slit cut at the equator of the eight ball, and a light source at its center that was used on a I-37 for several years is discussed. The instrument produced a sharp white line about one-fourth of an inch that extended completely across the cockpit from about the left to the right quarterpanels. The line remained parallel to the real horizon during all maneuvers. Its brightness and vertical distance from the horizon were adjustable in flight, as was the lateral center-of-rotation in later flights. Flight demonstrations were done on visual flight rules (VFR) moonless nights and over terrain with few lights. Pilot responses were mostly favorable to enthusiastic, with no negative reactions. Problem areas noted were the upright-inverted ambiguity; one pilot recovered inverted following an unusual attitude exercise and a general deterioration in the naturalness of cuing at bank angles greater than 60 deg or pitch attitudes greater than 30 deg.

Source record↗

A modeling analysis program for the JPL Table Mountain Io sodium cloud data

The necessary personnel software base was established to accomplish the data processing requirements for this project. Conversion of software required in reformatting the raw Io sodium cloud data was completed and data processing activities were initiated. Slit spectra data acquired by the JPL Table Mountain Io sodium cloud observing program were reviewed and their scientific value assessed. The lifetime description for sodium atoms in the Io sodium cloud model was improved by incorporating the most recently available temperatures and densities for ions and electrons in the plasma torus.

Smyth, W. H.↗

High Resolution Telescope and Spectrograph (HRTS)

The major objectives of the high resolution telescope and spectrograph (HRTS) are: (1) the investigation of the energy balance and mass balance of the temperature minimum, chromosphere, transition zone, and corona in quiet regions on the Sun as well as in plages, flares, and sunspots; (2) the investigation of the velocity field of the lower corona to study the origin of the solar wind; (3) the investigation of preflare and flare phenomena. The HRTS instruments consists of a telescope, an ultraviolet spectrograph, and ultraviolet spectroheliograph, and an H alpha slit display system, all housed in a thermal control canister mounted on an instrument pointing system.

Moore, R. L.↗

HgCdTe infrared focal plane arrays for imaging spectrometer applications

It is pointed out that the development of two-dimensional infrared focal plane arrays (FPAs) offers new alternatives in imaging and remote sensing. Attention is given to an imaging spectrometer which represents a new concept exploiting two-dimensional arrays. This instrument is to be used for the remote sensing of the earth on the basis of a utilization of reflected sunlight in both the visible (VIS) and short wavelength infrared (SWIR). The imaging spectrometer concept is to make it possible to obtain contiguous spectral coverage at high resolution without having to use increasingly complex scanners. The concept utilizes a prism spectrometer to disperse the image of the slit across the area arrays in the focal plane. The focal plane consists of silicon CCDs for the VIS and near infrared portions of the spectrum and HgCdTe hybrid arrays for the SWIR.

Rode, J. P.↗

Space vehicle glow measurements on STS 41-D

A flight experiment using a hand-held, image-intensified spectrographic camera was performed on mission 41-D. The instrument enabled the photographic documentation of the position of the spectral slit on the image to be subjected to spectrographic analysis. Because of this instrument feature, the spectrum of the glow on the Shuttle tail pod could be clearly separated from spectrum of the scattered light from the Orbiter. From the measurements it is clear that the spectrum of the glow is a continuum in the passband of the instrument between 4200 A and 8000 A. The measured spectral resolution of the instrument was 35 A. The scattered light from the Orbiter surfaces distinctly show the components of the earth's airglow at 5577 A and 7620 A. On the same flight material samples were also carried by the Orbiter attached to the Remote Manipulating System arm. These samples were representative of the material overcoatings used on the space telescope. The altitude of the 41-D flight was 290 km, instead of the 220 km which was originally planned for this experiment. The signal to noise ratio in the material glow discrimination experiment was quite low. This made it difficult to draw strong conclusions regarding the glow propensity of the materials. Nevertheless it was clear that polyethylene produces a very weak glow, while most black overcoating materials produce significant glow. MgF2 was also found to produce a relatively intense glow.

Mende, S. B.↗

Laboratory demonstration of image reconstruction for coherent optical system of modular imaging collectors (COSMIC)

The first physical demonstration of the principle of image reconstruction using a set of images from a diffraction-blurred elongated aperture is reported. This is an optical validation of previous theoretical and numerical simulations of the COSMIC telescope array (coherent optical system of modular imaging collectors). The present experiment utilizes 17 diffraction blurred exposures of a laboratory light source, as imaged by a lens covered by a narrow-slit aperture; the aperture is rotated 10 degrees between each exposure. The images are recorded in digitized form by a CCD camera, Fourier transformed, numerically filtered, and added; the sum is then filtered and inverse Fourier transformed to form the final image. The image reconstruction process is found to be stable with respect to uncertainties in values of all physical parameters such as effective wavelength, rotation angle, pointing jitter, and aperture shape. Future experiments will explore the effects of low counting rates, autoguiding on the image, various aperture configurations, and separated optics.

Traub, W. A.↗

Emission-line QSOs in the region of the Hercules cluster of galaxies

Slit spectrophotometry in the 305-855-nm range of 25 QSO candidates identified by slitless spectroscopy in two 1-deg-sq fields (one centered on Abell 2151 and one in a blank region) near the Hercules cluster of galaxies, obtained using image-dissector scanners on the 3-m Lick Observatory and 4-m KPNO telescopes at resolution 5-20 A during 1976-1979, are reported. The data are presented in tables and spectrograms and characterized in detail. In the cluster field, 14 candidates are confirmed as QSOs with z = 0.89-3.24; in the blank field, six are confirmed with z = 1.52-3.00. While the strongest feature of most spectra is found to be the Lyman alpha line, five QSOs have the 154.9-nm line of C IV and one the semiforbidden 190.9-nm line of C III as strong features. The wide variety of spectral profiles and absorption features in the higher-redshift QSOs and the lack of any QSOs with broad absorption troughs are discussed, and the use of these QSOs as probes for warm or cool gas in the Hercules cluster in Space Telescope Faint Object Spectrograph observations is suggested.

Burbidge, E. M.↗

New identifications of Fe XVII spectral lines in solar flares

The identifications of Fe XVII transitions between the 2s(2)2p(5)3s, 3p, and 3d configurations published by Jupen (1984) are reviewed. The review is based on examining spectroheliograms of solar flares obtained by a Naval Research Laboratory instrument on Skylab (S082-A). Agreement is obtained with the majority of identifications given by Jupen, but different wavelengths are found for a few of the lines. The relative intensities of the lines are qualitatively in agreement with calculations. A broad line at 1153.20 A is identified with the 2p(5)3s(3)P(0)-2p(5)3s(3)P1 forbidden transition of Fe XVII. This line was found in flare spectra obtained by the NRL slit spectrograph on Skylab (S082-B).

Feldman, U.↗

A model of the planetary nebula NGC 2392 determined from velocity observations

High-resolution slit spectra are combined with published photometric and velocity data to develop a model of the double-ring planetary nebula NGC 2392. The inner ring is due to an incomplete, prolate spheroid shell with most of the material concentrated near the minor axis circumference. The spheroid is seen almost pole-on, open at the sharp ends, and the formal velocity of expansion (93 km/s) at the ends is a record high for planetary nebulae. The outer ring is a nearly round spheroid of approximately 16 km/s expansion velocity and a different tilt angle than the inner shell. It is surrounded by rapidly expanding material with velocities of at least 75 km/s. A high-velocity stream of material is formed at the open ends of the inner shell and is accelerated by the central star's stellar wind to velocities of at least + or - 190 km/s, providing the first direct evidence for the kinematic role of a strong stellar wind. The inner shell age is approximately 800 yr, arguing that the shell material was preferentially ejected from the equator of the parent star, in contradiction with the usual predictions of theory.

Odell, C. R.↗

Optical multicolors - A poor person's z machine for galaxies

The feasibility, limits, accuracy, and uncertainties of using optical broadband colors in the form of two-color plots to measure the redshifts of faint galaxies are explored. Comparison of redshifts from slit spectra and 4-m photographic UBVI photometry of 100 faint galaxies confirms that colors do yield redshifts. These galaxies of 17-23 mag in B span a wide range of intrinsic color and are thus unlike previous samples of faint galaxies that were largely radio or cluster galaxies of early (red) type. For redshifts less than 0.35, two-thirds of the color redshifts agree with the spectroscopic values to within + or - 0.04 in z; for higher redshifts to z of 0.6, the errors increase to + or - 0.06. These accuracies were achieved for blue as well as red galaxies, and ensure that multicolors can serve as a poor person's redshift machine to study distant galaxies in clusters and the field.

Koo, D. C.↗

Population mechanisms for the He(+) n = 3 levels determined from measurements of the solar 1640 A emission

The 1640 A line profile is analyzed using solar data obtained by the NRL slit spectrograph on Skylab. Data from coronal hole regions, quiet sun regions, active regions, prominence regions, and flare regions are presented. The relative densities of 3s, 3p, and 3d levels are determined from the data, and the dominant population mechanisms for these levels are inferred using a rate equation model for the He(+) ion. The relative importance of collisional excitation, radiative recombination, and photoexcitation is determined for each of the solar regions.

Seely, J. F.↗

Kinematics and ionization of extended ionized gas in active galaxies. I - The X-ray luminous galaxies NGC 2110, NGC 5506, and MCG -5-23-16

Direct CCD imaging and long-slit Vidicon spectroscopy have been used to map the emission-line ratios, profiles, and velocity fields over the extended narrow-line regions in three nearby Seyfert galaxies, NGC 2110, NGC 5506, and MCG -5-23-16. The gas in the letter is spatially unresolved. Similarities between the other two nebulae include the excitation mechanism (photoionization by a central nonthermal source) and the overall profiles of the very broad emission lines close to the nucleus. The nebulae are, however, quite different in their global kinematic behavior. In NGC 2110, the gas appears to lie in a disk or flattened spheroid and to be in ordered rotation, with a classical rotation curve, about an axis parallel to the minor axis of the stellar isophotes. The velocity field of NGC 5506 is quite irregular, but a component of rotation in the plane of the galaxy seems to exist.

Wilson, A. S.↗

Stellar winds from hot stars in the Magellanic Clouds

O and B stars in the LMC and SMC have been observed with the IUE in order to compare their winds and mass loss rates with those of their galactic counterparts. It is found that while the wind terminal velocities are generally about 20 percent lower than in galactic stars of the same spectral type, it is not clear that the mass loss rates are significantly lower. This conclusion differs from the conclusions of other studies, and the reasons are discussed. The most important reason is that a less luminous set of stars with new spectral types determined from slit spectra is being examined. The discussion of stellar winds rests heavily on a comparison of relevant wind parameters observed in O stars using both high and low dispersion IUE spectra.

Garmany, C. D.↗

Experiments at high temperature and pressure - Laser heating through the diamond cell

CW laser heating through a diamond anvil cell by means of a focused Nd:YAG laser has resulted in the achievement of temperatures in the 1500-5000 K range for pressures of 10-100 GPa. Temperatures are determined radiometrically, with an accuracy of about 200 K, and temperature variation across the laser-heated spot is derived by means of spatial filtering with a slit that can be scanned. Melting temperatures are thus determined either on the basis of observed temperature at the liquid-solid interface or on that of the peak temperature at which glass is first produced with increasing laser power.

Jeanloz, R.↗

Effect of surface configuration during solid particle impingement erosion

A study of the progression of erosion and its detrimental effects due to solid particle impingement requires a detailed understanding of the erosion process and morphology of real surfaces of ductile metals. A series of experiments was conducted to investigate the erosion characteristics of aluminum alloy surfaces during spherical glass bead and angular crushed glass particle impingement. The effects of particle shape on cylindrical surfaces and surfaces with pre-existing holes and slits were determined. An attempt was made to understand the relationship between erosion rate and pit morphology. Based on the experimental observations, an empirical relationship between erosion rate and volume loss is presented. This technique provides an improved prediction method for a wide spectrum of ductile materials.

Rao, P. V.↗

Load-deflection tests and computer analyses of a high-precision adhesive-bonded antenna reflector panel

New adhesive-bonded panels are being investigated as a part of an effort to extend and upgrade the 64-m to a 70-m antenna network. Load-deflection tests were conducted on a sample high-precision adhesive-bonded panel for comparison with design criteria. Two computerized structural models were developed in order to predict the deformation patterns under different types of distributed and concentrated loadings. The main purpose was to obtain empirical stiffness factors for the slit beams and girders in the panel structure. With determination and use of the empirical stiffness factors, there is a good agreement between the theoretically predicted deflections and the test measurements. It was also found that the new bonded panels satisfy the stringent design specifications and surface tolerance bounds.

Chian, C. T.↗

Spectral identification/elimination of molecular species in spacecraft glow

Computer models of molecular electronic and vibrational emission intensities were developed. Known radiative emission rates (Einstein coefficients) permit the determination of relative excited state densities from spectral intensities. These codes were applied to the published spectra of glow above shuttle surface and to the Spacelab 1 results of Torr and Torr. The theoretical high-resolution spectra were convolved with the appropriate instrumental slit functions to allow accurate comparison with data. The published spacelab spectrum is complex but N2+ Meinel emission can be clearly identified in the ram spectrum. M2 First Positive emission does not correlate well with observed features, nor does the CN Red System. Spectral overlay comparisons are presented. The spectrum of glow above shuttle surfaces, in contrast to the ISO data, is not highly structured. Diatomic molecular emission was matched to the observed spectral shape. Source excitation mechanisms such as (oxygen atom)-(surface species) reaction product chemiluminescence, surface recombination, or resonance fluorescent re-emission will be discussed for each tentative assignment. These assignments are the necessary first analytical step toward mechanism identification. Different glow mechanisms will occur above surfaces under different orbital conditions.

Green, B. D.↗

High Resolution Telescope and Spectrograph (HRTS)

The major objectives of the high resolution telescope and spectrograph (HRTS) are: (1) the investigation of the energy balance and mass balance of the temperature minimum, chromosphere, transition zone, and corona in quiet regions on the Sun as well as in plages, flares, and sunspots; (2) the investigation of the velocity field of the lower corona to study the origin of the solar wind; and (3) the investigation of preflare and flare phenomena. The HRTS instruments consists of a telescope, an ultraviolet spectrograph, an ultraviolet spectroheliograph, and an H alpha slit display system, all housed in a thermal control cannister mounted on an instrument pointing system.

Moore, R.↗