SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The MARVEL reactor design requirements are currently listed within TFR-2576. Several MARVEL subsystems are required to be designed to seismic criteria of IBC 2015. This Engineering Analysis (EA) report documents the accelerations that need to be used in an equivalent-static method seismic analysis to satisfy this requirement.
While wavelet transforms have been used in the analysis of seismic signals, the methods used for the compression of seismic signals have been limited to Linear Predictive Coding and Transform Coding.
The 26 December 2004 Indian Ocean tsunami was the first earthquake tsunami of its magnitude to occur since the advent of both digital seismometry and satellite radar altimetry. Both have independently recorded the event from different physical aspects. The seismic data has then been used to estimate the earthquake fault parameters, and a three-dimensional ocean-general-circulation-model (OGCM) coupled with the fault information has been used to simulate the satellite-observed tsunami waves. Here we show that these two datasets consistently provide the tsunami source using independent methodologies of seismic waveform inversion and ocean modeling. Cross-examining the two independent results confirms that the slip function is the most important condition controlling the tsunami strength, while the geometry and the rupture velocity of the tectonic plane determine the spatial patterns of the tsunami.
On Earth, mass wasting events such as rock falls and landslides are well known consequences of seismic activity. Here we investigate the regional effects of seismicity in planetary environments with the goal of determining whether such surface features on the Moon, Mars, and Mercury could be triggered by fault motion.
Large (high voltage) power transformers (LPT), and more specifically, their bushings, are known to be susceptible to seismic failure. With bushing failure, a transformer will have to be replaced, which has a considerable lead time, adding to the power outage duration. Cost-efficient, proven solutions are not currently available to mitigate this risk, which can persist for the more than 30-year life of a particular transformer. This work will focus on developing and demonstrating a hardware solution to address seismic vulnerabilities and reduce outage risks from LPT failure. Sulfur Hexafluoride (SF6) is a specialty gas with excellent electrical insulation properties which has been used extensively in the power industry. This gas is unfortunately also one of the most potent greenhouse gases known to humanity. A 2014 report by the Intergovernmental Panel on Climate Change found that SF6 has a global warming potential (GWP) 23,000 times higher than Carbon Dioxide, and has the highest GWP of all gases assessed (Myhre 2013). SF6 is almost exclusively man-made and is produced for use as an insulator in high voltage electrical equipment. This makes the production and use of SF6 one of the leading sources of anthropogenic climate change. To fully eliminate the environmental impacts of SF6, alternative technology is needed. The ideal replacement would be a technology that can fulfil the same role as SF6, at the same cost or cheaper, but without adverse environmental effects. Currently, no technology fits this description, however several promising technologies have begun to enter the market. An industry scan was performed to assess the state of industry adoption and manufacturing capability for SF6-free alternative technologies for use at the high-voltage level, and the primary barriers to broader adoption.
The MARVEL reactor design requirements are currently listed within TFR-2576. Several MARVEL subsystems are required to be designed to seismic criteria of IBC 2015. This Engineering Analysis (EA) report documents the accelerations that need to be used in an equivalent-static method seismic analysis to satisfy this requirement.
This is a CSV spreadsheet containing UTM and Latitude and Longitude coordinates and elevations for Wells 78-32, 58-32, and 16A(78)-32 and BOR1, BOR2, BOR3, FOR2, FOR5, FORK, FORU, and FORW seismic stations. These are from a GPS survey conducted by the Utah Geological Survey in June, 2021.
Iron-rich silicate melts play an important role in the magmatic history of the Earth and the 16 Moon. However, their elastic properties at high pressures, especially the sound velocity, are poorly 17 understood. Here we determined the ultrasonic sound velocity for the first time of a hedenbergite 18 (Hd, CaFeSi2O6) melt and a melt mixture of 50 mol% hedenbergite + 50 mol% diopside (Hd50Di50) 19 at high pressure and temperature conditions up to 6 GPa and 2329 K, using high-pressure ultrasonic 20 technique combined with synchrotron radiation in a multi-anvil apparatus. Our results show that 21 Fe can significantly reduce the sound velocity while increase the density of silicate melts. 22 Comparing the Di, Hd, and Hd50Di50 melts, we find that the sound velocity does not mix linearly 23 2 for melts in the Hd-Di join, whereas the density for Hd-Di melts at high pressures can be well-24 described by linear mixing. Combined with melt geometry and melt compaction models, we 25 applied our results to study the stability and seismic signature of Fe-rich silicate melts in the Earth’s 26 upper mantle. For the low-velocity zone (LVZ) in mantle asthenosphere, although the degree of 27 seismic velocity reduction can be explained by the presence of a small amount of partial melt 28 distributed in film/band geometry along grain boundaries, Fe-rich melts formed at this depth are 29 unlikely to be gravitationally stable, but may be dynamically unextractable if the melt supply is 30 continuous. For the low-velocity layer (LVL) above the mantle transition zone, the presence of Fe-31 rich melts (with FeO>~10 wt%) distributed in textural equilibrium with the ambient mantle is a 32 plausible explanation.
Seismic design and qualification of a liquid-filled advanced nuclear reactor will have to account for fluid-structure interaction (FSI). Interaction between the tank, internal components, and contained liquid will rely on analysis of numerical models that must be verified and validated. Here this study demonstrates a verification process for models of a base-supported cylindrical tank by comparing numerical predictions and analytical solutions. The numerical models are consistent with the assumptions made to derive analytical solutions, namely, either a rigid or a linear elastic tank, ideal fluid, and small-amplitude, unidirectional, horizontal inputs. One software platform is used to illustrate the process. Seismic FSI analysis is performed using the Arbitrary Lagrangian-Eulerian (ALE) and Incompressible Computational Fluid Dynamics (ICFD) solvers in LS-DYNA. Reported responses are those used for design, including hydrodynamic pressures on the tank wall, shear forces and moments at the tank base, and wave heights of the contained liquid. The accuracy of the numerical results is discussed. The numerical models are verified for calculating the pressures on the tank wall and reactions at its base. Accurate simulation of wave action is challenging for both solvers. Recommendations for modeling, code development, and steps for verification are provided. Although focused on reactor vessels and one software platform, the verification process described herein is broadly applicable to liquid-filled vessels and other finite element codes.
Ambient seismic recordings taken at broad locations across Ross Ice Shelf and a dense array near West Antarctic Ice Sheet (WAIS) Divide, Antarctica, show pervasive temporally variable resonance peaks associated with trapped seismic waves in near-surface firn layers. These resonance peaks feature splitting on the horizontal components, here interpreted as frequency-dependent anisotropy in the firn and underlying ice due to several overlapping mechanisms driven by ice flow. Frequency peak splitting magnitudes and fast/slow axes were systematically estimated at single stations using a novel algorithm and compared with good agreement with active source anisotropy measurements at WAIS Divide determined via active sources recorded on a 1 km circular array. The approach was further applied to the broad Ross Ice Shelf (RIS) array, where anisotropy axes were directly compared with visible surface features and ice shelf flow lines. The near-surface firn, depicted by anisotropy above 30 Hz, was shown to exhibit a novel plastic stretching mechanism of anisotropy, whereby the fast direction in snow aligns with accelerating ice shelf flow.
Abstract Machine learning can predict the timing and magnitude of laboratory earthquakes using statistics of acoustic emissions. The evolution of acoustic energy is critical for lab earthquake prediction; however, the connections between acoustic energy and fault zone processes leading to failure are poorly understood. Here, we document in detail the temporal evolution of acoustic energy during the laboratory seismic cycle. We report on friction experiments for a range of shearing velocities, normal stresses, and granular particle sizes. Acoustic emission data are recorded continuously throughout shear using broadband piezo‐ceramic sensors. The coseismic acoustic energy release scales directly with stress drop and is consistent with concepts of frictional contact mechanics and time‐dependent fault healing. Experiments conducted with larger grains (10.5 μm) show that the temporal evolution of acoustic energy scales directly with fault slip rate. In particular, the acoustic energy is low when the fault is locked and increases to a maximum during coseismic failure. Data from traditional slide‐hold‐slide friction tests confirm that acoustic energy release is closely linked to fault slip rate. Furthermore, variations in the true contact area of fault zone particles play a key role in the generation of acoustic energy. Our data show that acoustic radiation is related primarily to breaking/sliding of frictional contact junctions, which suggests that machine learning‐based laboratory earthquake prediction derives from frictional weakening processes that begin very early in the seismic cycle and well before macroscopic failure.
There are an infinite number of locations where seismic waves interact with Earth's surface, yet seismologists can only record a finite set of ground motions. This requires assumptions about how known measurements or predictions can be extrapolated to nearby locations. We test to what extent extrapolation is viable using an array of 1,108 geophones installed 10–20 m apart within a 0.36 km 2 study area for 1 month atop the San Jacinto Fault in Southern California. Measuring ground motions from 38 small local earthquakes, we observe peak ground velocity (PGV) variations up to 22% across the array. We find the basin structure consistently traps energy, amplifying the seismic velocities, and that the damaged region within the fault reduces the PGVs. Comparing surface and borehole measurements (148 m deep), we find PGVs recorded at the surface are 3–10 times greater than the measurements at depth. We attribute these differences to amplification from soft sediments within the basin. We show that by leveraging information from >1,000 measurements per earthquake the ground motion velocities can be tightly constrained. These results suggest the spatial extrapolation of PGVs in regions of known faults and basins, even across a small area, should be done with caution.
Abstract Peterie et al. question one observation in our paper: associating pressure increases to injection volumes at distances of up to 25 km from an injection well. In this reply, we show that the comment misunderstands our analysis and the evidence that led to this conclusion. We also show that gauge‐depth‐corrected pressures, used by the authors to produce statewide pressure maps, are discrepant with the static fluid level data, provided in our original compilation and analysis. The discrepancies are a result of the pressure correction method employed, which naïvely substitutes formation pressure for bottomhole pressure to calculate wellbore fluid density. Their linearly interpolated pressure maps, based on sparse data, contain interpolation and extrapolation artifacts that contradict injection trends in the state, the Theis solution, and the superposition principle. We reiterate that pressure and static fluid level increases in Class I wells existed prior to 2013, most notably in central Kansas, where recent earthquakes are cited in the comment as evidence of a pressure plume emanating from the Kansas‐Oklahoma border, 90 km away. We show that the space‐time pattern of seismicity in this area is inconsistent with a northward propagating pressure plume and, instead, seismicity appears to be centered on and near a cluster of high‐rate injection wells, two of which are among the highest rate wells in the state. These observations, along with recent M4 + earthquakes during continued decreases in wastewater injection in southern Kansas and northern Oklahoma, question the usefulness of the comment for understanding and managing societally significant earthquakes.
Abstract On September 12, 2018 and April 14, 2019 shallow (<2.5 km from the surface, <1 km relative to sea level) earthquakes ( M w 4.0 and 4.1, respectively) struck a relatively aseismic area in south‐central Utah, within the Black Rock Desert volcanic field. Seismic waveforms are dominated by long‐period energy, no clear direct S‐wave arrivals, and signal durations of ∼100 s. Using co‐seismic interferograms, we detect clear and distinguishable surface deformation confirming the shallowness of the two mainshocks, while full moment tensor solutions rule out an isotropic source, such as an explosion or collapse. For the April 2019 sequence, we build an earthquake catalog using a dense temporary geophone array. The enhanced earthquake catalog shows a rapidly decaying aftershock sequence, with 85% of aftershocks occurring during the first three hours. Combining these observations, we argue that these earthquake sequences are related to the Black Rock Desert volcanic field.
Abstract Machine learning (ML) techniques have become increasingly important in seismology and earthquake science. Lab‐based studies have used acoustic emission data to predict time‐to‐failure and stress state, and in a few cases, the same approach has been used for field data. However, the underlying physical mechanisms that allow lab earthquake prediction and seismic forecasting remain poorly resolved. Here, we address this knowledge gap by coupling active‐source seismic data, which probe asperity‐scale processes, with ML methods. We show that elastic waves passing through the lab fault zone contain information that can predict the full spectrum of labquakes from slow slip instabilities to highly aperiodic events. The ML methods utilize systematic changes in P‐wave amplitude and velocity to accurately predict the timing and shear stress during labquakes. The ML predictions improve in accuracy closer to fault failure, demonstrating that the predictive power of the ultrasonic signals improves as the fault approaches failure. Our results demonstrate that the relationship between the ultrasonic parameters and fault slip rate, and in turn, the systematically evolving real area of contact and asperity stiffness allow the gradient boosting algorithm to “learn” about the state of the fault and its proximity to failure. Broadly, our results demonstrate the utility of physics‐informed ML in forecasting the imminence of fault slip at the laboratory scale, which may have important implications for earthquake mechanics in nature.
Compressional and shear wave velocities of topaz have been measured by ultrasonic interferometry in a multi-anvil apparatus up to 13 GPa at room temperature. By fitting the measured velocities under pressure to finite strain equations, the elastic moduli of topaz and their pressure derivatives were obtained, yielding K S0 = 165.5 (25) GPa, K S ' = 2.9 (1), G 0 = 116.5 (17) GPa, and G' = 1.0 (1). Modeling of the velocity profiles of subducted sediments suggests that at 8 GPa (~240 km depth) the P- and S- wave velocities of the subducted sediments exhibit a first order increase of 10% and 11%, respectively. Furthermore, the comparison between seismic observations and velocity contrasts of sediment + MORB model at 240 km shows dehydration of a 1.5–3.9 km thick sediment layer can potentially contribute to the seismically observed Lehmann discontinuity in Tonga, Japan, Philippine Sea, South America, Indonesia, and South Shetland subduction zones.
Seismic coda-wave analysis is a well-developed method for detecting subtle physical changes in complex media by measuring arrival times in the late-arriving energy from multiply scattered or reflected waves. However, a challenge arises when multiply scattered waves are not sufficiently separated in time from the direct arrivals to provide a clear coda wave train. Additional complications for monitoring changes in fracture systems arise when the signals originate from unsynchronized internal sources, such as natural or induced seismicity, from acoustic emission, or from transportable intra-fracture sources (chattering dust), that generate uncontrolled signals that vary in arrival time, amplitude and frequency content. Here, we use a twin neural network (TNN also known as a Siamese neural network) for dimensionality reduction to analyze signals from chattering dust to classify the fluid saturation state of a synthetic fracture system. The TNN with shared weights generates a low-dimensional representation of the data input by minimizing contrastive loss, serving as the input to a multiclass classifier that accurately classifies whether multiple fractures in a fracture system are fully saturated or partially saturated, or whether a change in saturation has occurred in different fractures in the system. Furthermore, these results show that information buried in unresolved codas from uncontrolled sources can be extracted using machine learning to monitor the evolution of fracture systems caused by physical and chemical processes even when the scattered and direct wave fields overlap.
Abstract We provide high‐resolution seismic imaging of the central Garlock fault using data recorded by two dense seismic arrays that cross the Ridgecrest rupture zone (B4) and the Garlock fault (A5). Analyses of fault zone head waves and P ‐wave delay times at array A5 show that the Garlock fault is a sharp bimaterial interface with P waves traveling ∼5% faster in the northern crustal block. The across‐fault velocity contrast agrees with regional tomography models and generates clear P ‐wave reflections in waveforms recorded by array B4. Kirchhoff migration of the reflected waves indicates a near‐vertical fault between 2 and 6 km depth. The P ‐wave delay times imply a ∼300‐m‐wide transition zone near the Garlock fault surface trace beneath array A5, offset to the side with faster velocities. The results provide important constraints for derivations of earthquake properties, simulations of ruptures and ground motion, and future imaging studies associated with the Garlock fault.