Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “routing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Adaptive changes in sexual behavior in the high–risk population in response to human monkeypox transmission in Canada can help control the outbreak: Insights from a two–group, two–route epidemic model

Monkeypox, a zoonotic disease, is emerging as a potential sexually transmitted infection/disease, with underlying transmission mechanisms still unclear. We devised a risk-structured, compartmental model, incorporating sexual behavior dynamics. We compared different strategies targeting the high-risk population: a scenario of control policies geared toward the use of condoms and/or sexual abstinence (robust control strategy) with risk compensation behavior change, and a scenario of control strategies with behavior change in response to the doubling rate (adaptive control strategy). Monkeypox's basic reproduction number is 1.464, 0.0066, and 1.461 in the high-risk, low-risk, and total populations, respectively, with the high-risk group being the major driver of monkeypox spread. Policies imposing condom use or sexual abstinence need to achieve a 35% minimum compliance rate to stop further transmission, while a combination of both can curb the spread with 10% compliance to abstinence and 25% to condom use. With risk compensation, the only option is to impose sexual abstinence by at least 35%. Adaptive control is more effective than robust control where the daily sexual contact number is reduced proportionally and remains constant thereafter, shortening the time to epidemic peak, lowering its size, facilitating disease attenuation, and playing a key role in controlling the current outbreak.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

New Synthetic Route to 4,6‐Diamino‐5,7‐dinitro‐benzo‐furazan, Important Decomposition Product of 1,3,5‐Triamino‐2,4,6‐trinitrobenzene

The important 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) decomposition byproduct, 4,6-diamino-5,7-dinitro-benzo-furazan (F 1 ), was prepared in a four-step reaction sequence starting with commercially available materials through a key intermediate, 4,6-dichloro-5,7-dinitro-benzo-furazan. The introduction of azido to 4,6-dichloro-benzo-furazan, followed by nitration and amination gave F 1 in good yield. This new method showed a greatly improved yield and ease of purification than previous methods (the total yield was 30%–40% in seven steps). F 1 is a stable yellow solid with a melting point of 308.7°C and a thermal decomposing temperature of 310.3°C (differential scanning calorimetry at 10°C/min heating rate). The solid-state structure was solved by single-crystal X-ray analyses at low temperatures (100 K). The compound crystallizes in a P 2 1 c space group with the formula C 6 H 4 N 6 O 5 •H 2 O with 12 molecules of F 1 /H 2 O in the unit cell. This compound has eluded complete characterization for almost 50 years. With this information, more advanced decomposition models can be created to further improve critical safety margins in handling the energetic material, TATB.

decomposition↗
DOE OSTI2021

Reconfiguration of Amorphous Complex Oxides: A Route to a Broad Range of Assembly Phenomena, Hybrid Materials, and Novel Functionalities

This work demonstrate that reconfiguration of amorphous oxide layers drives the assembly of oxide-based and freestanding nanomembranes into 3D structures with a radius of a few hundred nanometers. Reconfiguration-driven assembly is a versatile approach to impart large strains and strain gradients in a broad palette of complex oxides. This capability allows for manipulating and enhancing ferroelectricity, flexoelectricity, piezoelectricity, superconductivity, and ferromagnetism in complex oxides. Moreover, by the approach presented in this work, strain-engineered oxides are obtained in the form of 3D structures that can be fabricated in parallel on any substrate, including large-area and single crystalline semiconductor substrates. This approach will create a vast expanse of possibilities to investigate and leverage strain-tunable effects in amorphous, poly-crystalline, and single-crystalline complex oxides. Reconfiguration-driven assembly of NMs also allows combining different materials in a radial geometry and through scalable processes. For example, radial superlattices of Si (or GaAs) and various complex oxides or alternating layers of different complex oxides (e.g., SrTiO 3 and LaAlO 3 ) could be fabricated by release and heating of bilayer NMs. Here, a broad palette of electronic band structures and spin–orbit interactions could then be obtained by tailoring the curvature of the self-assembled NMs and the materials that the heterostructure comprises.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

A Celestial route to AdS bulk locality

We prove a precise form of AdS bulk locality by deriving analytical two-sided bounds on bulk Wilson coefficients. Our bounds are on the Wilson coefficients themselves, rather than their ratios, as is typically found in the literature. Inspired by the Celestial amplitudes program in flat space, we perform a Celestial transform of the CFT Mellin amplitude of four identical scalars. Using the crossing symmetric dispersion relation (CSDR), we express the resulting amplitude in terms of crossing symmetric conformal partial waves. The partial waves satisy remarkable positivity properties which along with the unitarity of the CFT prove sufficient to derive the bounds. We then employ our methods in the limit of large AdS radius and recover known bounds on flat space Wilson coefficients and new bounds on their large radius corrections. We check that the planar Mellin amplitude of four stress-tensor multiplets in $\mathcal{N}$ = 4 SYM satisfies our bounds. Finally, using null constraints, we derive a form of low-spin dominance in AdS EFTs. We find that the low-spin dominance is strongest in flat space and weakens as we move away from flat space towards higher AdS curvature.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

All-aerosol-jet-printed highly sensitive and selective polyaniline-based ammonia sensors: a route toward low-cost, low-power gas detection

In this work, we report the design and scalable fabrication of a low-cost and low-power polyaniline-based (PANI) ammonia (NH3) gas sensor on polyimide (PI) substrates using additive manufacturing techniques. The silver interdigitated electrode (IDE) arrays and conducting polymer films are printed onto PI using a direct-write technology of aerosol-jet printing. Morphological characteristics are examined by scanning electron microscopy and energy-dispersive X-ray analysis which reveal homogeneously printed PANI film on the IDE platform. The gas sensing performance is evaluated in the analytical early leak detection range of 5–1000 ppm NH3 in air as a function of both thermal (23 °C, 50 °C, 80 °C) and relative humidity (RH = 0%, 30%, 50%) exposures. The sensor exhibits sensitivity down to 5 ppm NH3 with a sub-ppm detection limit and good repeatability. We observe rapid NH3 detection at 0% RH with very extended times for equilibration and recovery. However, at both 30 and 50% RH, the room temperature response and recovery times are reduced to only about 1 min and 5 min, respectively. Experiments also reveal good sensitivity toward the analyte even at higher operating temperatures. Present results merit the practical application of aerosol-jet-printed, low-power sensors for industrial applications where low-level hazardous gas detection is essential.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Sol–gel synthesis of iodosodalite precursors and subsequent consolidation with a glass binder made from oxides and sol–gel routes

Radioiodine accumulates in aqueous solutions and off-gas streams during nuclear fuel reprocessing due to its solubility in aqueous solutions and volatility, respectively. Additionally, radioiodine is highly mobile in geological environments and iodine-129 has been found to be one of the largest long-term contributors to chronic dose to humans in scenarios of radionuclide migration from geological repositories. Most of the radioiodine can be captured during fuel reprocessing in off-gas streams using solid sorbents and scrubbing solutions. Once iodine is captured, it must be stored in a durable form for eventual disposal. Iodosodalite has been investigated as a waste form for radioiodine, however these synthesis processes typically result in mixed products and iodine volatilization during consolidation. Therefore, this paper proposes a novel approach to synthesizing iodosodalite utilizing a sol-gel method. This method was chosen to lower processing temperatures and improve product yield. Preliminary experiments conducted to determine the viability of this synthetic method are presented. Additionally, consolidation of sol-gel derived iodosodalite with a glass-binder was explored using three different methods: 1) incorporating the glass-binder during gel preparation using alkoxide precursors; 2) separately preparing the glass binder using a sol-gel method; and 3) separately preparing the glass-binder using a melt-quench technique. Glass-bonded iodosodalite was successfully synthesized using these novel sol-gel approaches.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Sequestration and release of nitrite and nitrate in alkali-activated slag: A route toward smart corrosion control

Intercalating the corrosion inhibitive ions in hydrotalcite is a promising approach to improve the long-term efficiency of inhibitors in corrosion protection of steel in reinforced concrete. In this work, the potential of autogenously generating nitrite- and nitrate-intercalated hydrotalcite in alkali-activated slag (AAS) is investigated. The results show that the added nitrite and nitrate ions are preferably uptaken in the interlayer structure of hydrotalcite in AAS, and the sequestered nitrite and nitrate are released upon chloride exposure in seawater and NaCl solution. The incorporation of nitrite and nitrate has little detrimental effects on the chloride binding capacity of AAS but slightly enhances the chloride ingress due to the pore coarsening effect. Similar to ordinary Portland cement (OPC), AAS is more permeable to the chloride in seawater than NaCl solution. However, unlike the release of bound chloride contributed by ettringite formation in seawater-exposed OPC, the enhanced chloride ingress in seawater-exposed AAS is primarily attributed to the aggravated pH reduction at the exposure front due to brucite formation. This study contributes to the design of alkali-activated binders with a smart inhibitor releasing ability for mitigating corrosion of steel in concrete.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Novel processing route for design and manufacturing of metal toughened nanoceramics: Al–Al 2 O 3 nanocermets

Monolithic alumina is a highly brittle ceramic with a very low fracture toughness, making it an unreliable material for mechanical and structural applications. Ceramic-metal composites (cermets) are the subject of intensive interest to obtain materials which can address the intrinsic brittleness of ceramics without compromising their high strength and light weight. In the present investigation, aluminium-alumina (Al–Al 2 O 3 ) nanocermets were developed. The nanocermets possessed the toughness of Al phase and the strength of reinforced nano Al 2 O 3 particles. Here, the nanocermets green bodies were prepared such that upon sintering each adjacent Al 2 O 3 grain was conformally coated with a continuous Al film. Mechanical milling via a combination of cryo-milling and ball-milling was used to prepare Al–Al 2 O 3 nano-powder mixture. Spark plasma sintering was used to consolidate the green nanocermets. Results show that specimens prepared from 35 h milled powders exhibited superior mechanical properties as compared to other nanocermets, with an improvement in microhardness, elastic modulus, compressive strength, and flexural strength by 88%, 78%, 69% and 40% with respect to sintered pure Al. The indentation toughness of 35 h milled nanocermet showed an increment of 12.5% with respect to sintered pure Al 2 O 3 . Characterization techniques such as XRD, SEM, HR-TEM, X-ray tomography were employed to investigate the phase evolution and structural morphology, while FEM simulations were performed for understanding the crack propagation mechanisms in nanocermets.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Towards the sustainable conversion of corn stover into bioenergy and bioproducts through biochemical route: Technical, economic and strategic perspectives

Corn stover (CS) is one of the most abundant agricultural wastes and is ubiquitous around the world that is left over after grain harvest and accounts for 47–50% dry mass of the total grain yield. The global CS yield is 1661.25 million tons/year, which is 27.2% of the total agricultural waste. CS consists of about 34.5% stems, 32.3% leaves, 14.3% husks, 12.3% cobs and 6.6% flowers, with up to 45% cellulose, 30% hemicellulose and 20% lignin. Further, due to its favorable economic and environmental potential, CS is considered an ideal raw material for producing biofuels and biobased chemicals, which can largely be divided into carbohydrate and lignin platforms. However, the techno-economic perspectives of CS-based biorefineries have remained questionable due to the inadequate supply chain logistics, lack of cost-effective conversion technologies, limited scale-up of the product-specific technologies, and lower competitiveness in the market compared to their counterparts, such as sugar and starch-based biorefineries. While CS is converted by thermochemical and biochemical approaches, the latter is considered to be more sustainable for its selective conversion under mild conditions using microorganisms. This review aimed to critically discuss the latest research and developments on the biochemical conversion of CS into biofuels and chemicals. In particular, this paper covers the market potential of biofuels and chemicals to which CS can make a significant contribution, technological developments in the microbial conversion of CS, major biofuels and chemicals produced from CS-derived carbohydrates and lignin, and the technoeconomic perspectives of CS-based biorefinery.

09 BIOMASS FUELS↗