Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “profile”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Measurements of He D3 profiles in solar plages

Measurements of the profiles of the He D3 lines in solar plages are presented as a probe of the plage atmosphere. Observations were made at selected positions in quiescent plages during the period October 1978-April 1979 by the 25-cm coronagraph/3-m coude spectrograph at the Mees Solar Observatory on Mount Haleakala. Individual D3 plage profiles are fit well with a two-component, differentially moving atmosphere with constant source function and total Doppler width. The principal absorption is attributed to nearly stationary material, with a kinetic temperature less than 17,200 K, and velocity distribution is found to represent a net downflow in the plage atmosphere extending to around 12 km/sec. The present results for individual plage profiles are also noted to be consistent with those of Namba (1963). Time series of D3 profiles at fixed plage positions and the velocity spectra for nearby photospheric lines are observed to show general enhancements at periods of around 5 min, with redshift leading variations in line width by about 49 deg. Interpretations of the width variation as temperature variations are found not to be consistent with the properties of acoustic wave modes in a stratified atmosphere, presumably indicating magnetic field effects.

Landman, D. A.↗
NASA NTRS1982

Tooth profile analysiis of circular-cut, spiral-bevel gears

An analysis of tooth profile changes in the transverse plane of circular-cut, spiral-bevel crown gears is presented. The analysis assumes a straight-line profile in the mid-transverse plane. The profile variation along the centerline is determined by using expressions for the variation of the spiral angle along the tooth centerline, together with the profile description at the mid-transverse plane. It is shown that the tooth surface is a hyperboloid and that significant variations in the pressure angle are possible.

Huston, R. L.↗
NASA NTRS1982

Line profiles of T Tauri stars - Clues to the nature of the mass flow

A set of high resolution observations of the H-alpha Na D, He I 5876 A, and H-gamma lines in several T Tauri stars is presented. Repeated observations of some of these objects yield some indication of the importance of time-dependent effects. The line profiles should be useful for detailed radiative transfer modeling. A cursory survey of the profiles suggests that 'turbulent' velocities in some cases may not be negligible in comparison with the bulk flow speeds and that many emission lines, such as Na D, may be formed in a narrow layer near the stellar photosphere. It is suggested that the effects of geometrical occulation of narrow line-emitting regions in general outflow can account for some of the peculiarities of the line profiles. However, some aspects of the line profiles, such as the large-scale, highly variable redshifted Na D absorption in RW Aur, clearly require more complicated motions.

Hartmann, L.↗
NASA NTRS1982

Evidence of redshifts in the average solar line profiles of C IV and Si IV from OSO-8 observations

Line profiles of C IV and Si V obtained by the Colorado spectrometer on OSO-8 are presented. It is shown that the mean profiles are redshifted with a magnitude varying from 6-20 km/s, and with a mean of 12 km/s. An apparent average downflow of material in the 50,000-100,000 K temperature range is measured. The redshifts are observed in the line center positions of spatially and temporally averaged profiles and are measured either relative to chromospheric Si I lines or from a comparison of sun center and limb profiles. The observations of 6-20 km/s redshifts place constraints on the mechanisms that dominate EUV line emission since it requires a strong weighting of the emission in regions of downward moving material, and since there is little evidence for corresponding upward moving materials in these lines.

Roussel-Dupre, D.↗
NASA NTRS1981

Satellite profile measurements of stratospheric ozone

A description is presented of preliminary results obtained in connection with the Stratospheric Aerosol and Gas Experiment (SAGE). SAGE, which uses a limb scanning solar radiometer, is an experiment aboard the Applications Explorer Mission 2 spacecraft which was launched on February 18, 1979. The instrument utilizes the technique of solar occultation to measure limb-path atmospheric extinction profiles which are inverted to yield vertical profiles of various atmospheric constituents in the latitude range from 79 deg South to 79 deg North. The ozone spectral channel is centered at 0.60 micrometers in the middle of the Chappuis absorption band. The general characteristics of the ozone profile measurements are shown in a graph. Each profile represents a day's average of approximately 15 measurements at the latitude band indicated. The SAGE ozone measurements are generating a highly detailed picture of the stratospheric ozone distribution.

Mccormick, M. P.↗
NASA NTRS1982

A theoretical study of a two-wavelength lidar technique for the measurement of atmospheric temperature profiles

The theory of differential absorption lidar measurements for lines with a Voigt profile is given and applied to a two-wavelength technique for measuring the atmospheric temperature profile using a high J line in the oxygen A band. Explicit expressions for the temperature and pressure dependence of the absorption coefficient are developed for lines with a Voigt profile. An iteration procedure for calculating the temperature for narrow laser bandwidths is described which has an accuracy better than 0.2 K for bandwidths less than 0.01/cm. To reduce the errors in lidar measurements due to uncertainties in pressure, a method for estimating the pressure from the temperature profile is described. A procedure for extending the differential absorption technique to the case of finite laser bandwidth with good accuracy is also described. Simulation results show that a knowledge of the laser frequency is needed to 0.005/cm for accurate temperature measurements. Evaluation of the sensitivity for both ground- and Shuttle-based measurements shows accuracies generally better than 1 K. This technique allows up to an order of magnitude improvement in sensitivity compared to other differential absorption lidar techniques.

Korb, C. L.↗
NASA NTRS1982

Observations and interpretation of the line profiles of excited H2 in Orion

The profiles of the V=1-0 S(1) line of H2 in the Orion molecular cloud show a variation from the center of the emission region where the profiles are broad and have extended blue wings, to the periphery where the profiles are narrow and have a peak at the velocity of the molecular cloud. These observations can be understood by a model of a radially expanding supersonic flow of gas colliding with the surrounding molecular cloud. It is concluded that the high velocity emission originates in the flow and the low velocity emission originates in the molecular cloud. Density variations in the flow and the surrounding cloud are necessary to explain the detailed line profiles and morphology.

Geballe, T. R.↗
NASA NTRS1983

Computer programs for generation and evaluation of near-optimum vertical flight profiles

Two extensive computer programs were developed. The first, called OPTIM, generates a reference near-optimum vertical profile, and it contains control options so that the effects of various flight constraints on cost performance can be examined. The second, called TRAGEN, is used to simulate an aircraft flying along an optimum or any other vertical reference profile. TRAGEN is used to verify OPTIM's output, examine the effects of uncertainty in the values of parameters (such as prevailing wind) which govern the optimum profile, or compare the cost performance of profiles generated by different techniques. A general description of these programs, the efforts to add special features to them, and sample results of their usage are presented.

Sorensen, J. A.↗
NASA NTRS1982

Mass loss in Alpha Cygni - Synthetic H-Alpha profiles

Alpha Cygni (A2 Ia) is the brightest and best-studied A type supergiant. The star's position in the H-R diagram makes the determination of its mass loss rate extremely important. The present investigation is concerned with a semiempirical modeling of the H-alpha profile in Alpha Cyg in connection with the objective of estimating the mass loss rate and further constraining the physical state of the stellar wind. The synthetic H-alpha profiles considered are compared with the observed profiles in Alpha Cyg. It is concluded that a spherically symmetric, steady-state model, with the network of hydrogen transitions treated in detail, can fit the deeper observed profiles but not the shallower ones. The obtained results indicate that, within the context of the turbulent models, the mass loss rate of Alpha Cyg is (1.7 + or - 0.4) x 10 to the -7th solar mass per year.

Kunasz, P. B.↗
NASA NTRS1983

Observations of the line profile of Paschen alpha in 3C 273

Within the uncertainties, the P-alpha line profile is the same as those of H-beta, L-alpha, and C IV. It is therefore contended that if current models of broad-line-emitting clouds in quasars are correct, then the similarity of the P-alpha line profile to the L-alpha profile argues against a velocity field dominated by radial inflow or outflow. It is noted, however, that if the cloud motions are predominantly due to radial inflow or outflow, then the clouds must radiate more isotropically in L-alpha then current models predict. The observed similarity of the line profiles of P-alpha at 1.875 microns and of C IV at 1550 A leads to the conclusion that there is no differential reddening caused by dust between clouds moving at different velocities within the broad line region of 3C 273.

Sellgren, K.↗
NASA NTRS1983

Computations of the current profile influence on tearing instability

Results of computations of tearing instability of a plasma column in a strong longitudinal magnetic field are presented for different current profiles. The power current profiles j=j sub 0(1-(r/a)(P))(nu) are considered and analyzed for various values of the parameters p and v. The tearing instability of the smoothed two-step profiles is studied. Optimal smoothed two-step profiles are constructed which are stable with respect to all helical largescale perturbations.

Blekher, P. M.↗
NASA NTRS1983

Standard ozone profiles from balloon and satellite data sets

Standard profiles based on upper level averaged profiles from BUV and lower level averaged profiles from balloon measurements are presented in a parametric representation as a function of time of year and latitude. The representation is a simple 4-parameter function representing the ozone amount (m-atm-cm) in each of 12 atmospheric layers defined following the standard Umkehr convention. The same parameterization is applied to the Nimbus-7 SBUV data and is compared to the BUV/balloon parameterization. The ozone variance unaccounted for by the representation is presented and discussed. The season-latitude representation reduces considerably the ozone variance at all levels and explains much of the correlation between layers. This simple representation and corresponding covariance matrix have been used as a priori information in the ozone vertical profile inversion of the Nimbus-7 SBUV experimental measurements.

Klenk, K. F.↗
NASA NTRS1984

The effect of forward flight on the noise and flow field of inverted profile jets

Noise and flow field measurements are reported for an inverted profile coannular jet (where the annular jet speed exceeds the center jet speed) under simulated flight conditions. The annular and center jets were cold and both were operated subsonically. Forward flight was simulated by placing the coannular jet inside a larger open jet. Acoustic measurements show the effects of inverted profile shape and simulated flight on far field directivity, total radiated power, and spectral content. Measurements of total acoustic power demonstrate that the acoustic efficiency of inverted profile jets is about 3 dB less than the efficiency of 'top hat' profile jets, and that the noise decreases as the seventh power of the relative jet velocity in the limit of small flight velocity. Flow measurements demonstrate that the jet spreading parameter scales the thickness of the outer shear layer and the passage frequencies of the large turbulence scales. Comparisons between the turbulence time scales and the noise spectra suggest that coherent noise sources may become more important in forward flight.

Petersen, R. A.↗
NASA NTRS1984

Average ozone profiles for 1979 from the Nimbus 7 SBUV instrument

Monthly average ozone profiles from the first year of operation of the solar backscattered ultraviolet (SBUV) instrument on the Nimbus 7 satellite (November 1978 through October 1979) are tabulated for 10 deg latitude bands from 80 deg S to 80 deg N. For each month and latitude zone layer ozone amounts, standard deviations for 12 Umkehr layers (approximately 0-60 km), and the average total ozone for each zone are listed. The ozone mixing ratio and number density at the center of each layer are also given. It is found that the average SBUV profiles agree with average Umkehr profiles measured at Boulder to within 10 percent over most of the range. The Krueger-Minizner model is found to be a good representative ozone model for 45 deg N, agreeing with an annual average of measured profiles to better than 10 percent between 20 and 60 km.

Mcpeters, R. D.↗
NASA NTRS1984

Effects of aircraft and flight parameters on energy-efficient profile descents in time-based metered traffic

The influence of several parameters on the time required to fly a nominal profile descent of a B-737 from an entry fix to a metering fix 75 n.mi. away was studied. The ground distance for the constant speed segment was adjusted in each case so that the aircraft would always arrive at the metering fix position at the completion of the five segments of the profile descent. The influence of eight parameters on the same nominal profile descent is outlined, but the method used for the off nominal cases was changed. The time calculated for the constant speed segment in the nominal case is used for all off nominal cases. This method allows the aircraft to arrive at the metering fix before or after the profile descent is complete. It is shown that descent Mach number and wind speed have a large effect on the time error, whereas weight was a much smaller effect.

Dejarnette, F. R.↗
NASA NTRS1985

Redistribution of the inlet temperature profile through the SSME fuel turbine

A three-dimensional Euler code was used to predict radial inlet temperature profile redistribution through the two-stage fuel turbopump turbine. The calculation was made at the FPL condition using a turbine inlet radial temperature profile. This same calculation was made earlier on single-stage turbine. There was a redistribution of the temperature profile such that the hotter gas that originated at the midspan region at the turbine inlet was shifted to the hub and tip regions on the blade pressure surface at the rotor exit. For the SSME fuel turbine, however, there was no redistribution of the inlet temperature profile. No strong secondary flow patterns were identified. It is indicated that this trend is attributed to the high solidity SSME blading.

Schwab, J. R.↗
NASA NTRS1984

Potential advantages of the spaced antenna method for operational wind profiling, part 3.1B

The problem of very short-range forecasting is twofold. It is necessary to understand the processes that are being forecasted, and data appropriate to the scale of interest has to be generated. Coherent VHF and UHF radars are being used for operational wind profiling and are providing part of the solution to the data-acquisition problem. The Profiler system operated by the Wave Propagation Laboratory at NOAA has already shown great promise. As a result, plans are being considred for expanding the network of radars to cover a larger area of the country. The Profiler uses what is commonly referred to as the Doppler method for measuring winds. Two beams are pointed off-vertical, and the Doppler shift of the echo determines the line-of-sight velocity. The velocity components along the beams are then translated to horizontal wind components. A number of possible advantages of the spaced antennas (SA) method for operational wind profiling are discussed.

Rottger, J.↗
NASA NTRS1984

Rotational velocities of later B type and A type stars as determined from ultraviolet versus visual line profiles

Theoretical line profiles of the Si III 1299 and Fe II 2756 lines are computed for rotating B5-A7 model stars, and compared with observed profiles from IUE spectra to derive rotational velocities. Real differences in widths for ultraviolet as compared with visual line profiles exist in the sample of B type stars (but not for the A type rapidly rotating stars), although these are not as large as previously reported in the literature. Comparison with the theoretical line profiles gives rotational velocities that are in good agreement with visually determined v sin i values for the same stars, which suggests that the shape-distorted, gravity-darkened models are reasonable.

Carpenter, K. G.↗