Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pair distribution function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Solvation structure and energetics of electrolytes for multivalent energy storage

By analysing X-ray pair distribution function data using a multivariate statistical approach, we isolate the cation solvation structure for monovalent (Li + /Na + /K + ) and multivalent (Mg 2+ /Ca 2+ /Zn 2+ ) electrolytes based on TFSI salts in diglyme. Parallel molecular dynamics simulations provide enhanced structural details. The data suggest that contact ion-pairs are a common feature in multivalent electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bonding and structure in dense multi-component molecular mixtures

We have performed finite-temperature density functional theory molecular dynamics simulations on dense methane, ammonia, and water mixtures (CH 4 :NH 3 :H 2 O) for various compositions and temperatures (2000 K ≤ T ≤ 10000 K) that span a set of possible conditions in the interiors of ice-giant exoplanets. The equation-of-state, pair distribution functions, and bond autocorrelation functions (BACF) were used to probe the structure and dynamics of these complex fluids. In particular, an improvement to the choice of the cutoff in the BACF was developed that allowed analysis refinements for density and temperature effects. We note the relative changes in the nature of these systems engendered by variations in the concentration ratios. As a result, a basic tenet emerges from all these comparisons that varying the relative amounts of the three heavy components (C,N,O) can effect considerable changes in the nature of the fluid and may in turn have ramifications for the structure and composition of various planetary layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Revealing the Correlation between the Solvation Structures and the Transport Properties of Water-in-Salt Electrolytes

Water-in-salt (WIS) electrolytes containing 21 m lithium bis(trifluoromethane sulfonyl)imide (LiTFSI) have been considered as a safe and environment-friendly alternative to common organic electrolytes used in lithium-ion batteries. However, the relation between the solvation structures and transport properties of these materials remains elusive. Here, for this paper, we performed small-angle X-ray scattering (SAXS), small-angle neutron scattering (SANS), and X-ray pair distribution function (PDF) measurements of LiTFSI aqueous solutions at a wide range of concentrations. Combined with molecular dynamics simulations, the detailed solvation structures from long to short length scale were resolved. We found that the TFSI– solvation structures consist of TFSI– solvated structures and TFSI– networks; the former corresponds to solvent separated ion pairs, while the latter corresponds to contact ion pairs and cation–anion aggregates. In addition, we found that the relaxation time in the q range associated with the anion network structure exhibits the same concentration dependence as the viscosity. By combining the results from the experiments and simulations, this study revealed a correlation between the solvation structures of LiTFSI and the transport properties of the solutions, which is critical to understand the relation between the transport properties and the dynamics of the ions for imide-based lithium-ion salt aqueous electrolytes.

36 MATERIALS SCIENCE↗

Early stage structural development of prototypical zeolitic imidazolate framework (ZIF) in solution

Given the wide-ranging potential applications of metal organic frameworks (MOFs), an emerging imperative is to understand their formation with atomic scale precision. This will aid in designing syntheses for next-generation MOFs with enhanced properties and functionalities. Major challenges are to characterize the early-stage seeds, and the pathways to framework growth, which require synthesis coupled with in situ structural characterization sensitive to nanoscale structures in solution. Here we report measurements of an in situ synthesis of a prototypical MOF, ZIF-8, utilizing synchrotron X-ray atomic pair distribution function (PDF) analysis optimized for sensitivity to dilute species, complemented by mass spectrometry, electron microscopy, and density functional theory calculations. We observe that despite rapid formation of the crystalline product, a high concentration of Zn(2-MeIm) 4 (2-MeIm=2-methylimidazolate) initially forms and persists as stable clusters over long times. A secondary, amorphous phase also pervades during the synthesis, which has a structural similarity to the final ZIF-8 and may act as an intermediate to the final product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing the Local Site Disorder and Distortion in Pyrochlore High-Entropy Oxides

High-entropy oxides (HEOs) have attracted great interest in diverse fields because of their inherent opportunities to tailor and combine materials functionalities. The control of local order/disorder in the class is by extension a grand challenge toward realizing their vast potential. In this paper, we report the first examples of pyrochlore HEOs with five M-site cations, for Nd 2 M 2 O 7 , in which the local structure has been investigated by neutron diffraction and pair distribution function (PDF) analysis. The average structure of the pyrochlores is found to be orthorhombic Imma, in agreement with radius-ratio rules governing the structural archetype. The computed PDFs from density functional theory relaxed special quasirandom structure models are compared with real space PDFs in this work to evaluate M-site order/disorder. Reverse Monte Carlo combined with ab initio molecular dynamics and Metropolis Monte Carlo simulations demonstrates that Nd 2 (Ta 0.2 Sc 0.2 Sn 0.2 Hf 0.2 Zr 0.2 ) 2 O 7 is synthesized with its M-site local to nanoscale order highly randomized/disordered, while Nd 2 (Ti 0.2 Nb 0.2 Sn 0.2 Hf 0.2 Zr 0.2 ) 2 O 7+x exhibits a strong distortion of the TiO 6 octahedron and small degree of Ti chemical short-range order (SRO) on the subnanometer scale. Calculations suggest that this may be intrinsic, energetically favored SRO rather than due to sample processing. These results offer an important demonstration that the engineered variation of participating ions in HEOs, even among those with very similar radii, provides richly diverse opportunities to control local order/disorder motifs—and therefore materials properties for future designs. This work also hints at the exquisite level of detail that may be needed in computational and experimental data analysis to guide structure–property tuning in the emerging HEO materials class.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reverse Monte Carlo modeling for low-dimensional systems

Reverse Monte Carlo (RMC) is one of the commonly used approaches for modeling total scattering data. However, to extend the capability of the RMC method for refining the structure of nanomaterials, the dimensionality and finite size need to be considered when calculating the pair distribution function (PDF). To achieve this, the simulation box must be set up to remove the periodic boundary condition in one, two or three of the dimensions. This then requires a correction to be applied for the difference in number density between the real system and the simulation box. In certain circumstances an analytical correction for the uncorrelated pairings of atoms is also applied. The validity and applicability of our methodology is demonstrated by applying the algorithms to simulate the PDF patterns of carbon systems with various dimensions, and also by using them to fit experimental data of CuO nanoparticles. This alternative approach for characterizing the local structure of nano-systems with the total scattering technique will be made available via the RMCProfile package. The theoretical formulation and detailed explanation of the analytical corrections for low-dimensional systems – 2D nanosheets, 1D nanowires and 0D nanoparticles – is also given.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Density Functional Modeling of the Local Structure of Kaolinite Subjected to Thermal Dehydroxylation

Understanding the atomic-level changes that occur as kaolinite is converted (thermally dehydroxylated) to metakaolin is critical to the optimization of this large-scale industrial process. Metakaolin is X-ray amorphous; therefore, conventional crystallographic techniques do not reveal the changes in local structure during its formation. Local structure-based experimental techniques are useful in understanding the atomic structure but do not provide the thermodynamic information which is necessary to ensure plausibility of refined structures. Here, kaolinite dehydroxylation is modeled using density functional theory, and a stepwise methodology, where several water molecules are removed from the structure, geometry optimization is carried out, and then the process is repeated. Hence, the structure remains in an energetically and thermodynamically feasible state while transitioning from kaolinite to metakaolin. The structures generated during the dehydroxylation process are validated by comparison with X-ray and neutron pair distribution function data. Thus, this study illustrates one possible route by which dehydroxylation of kaolinite can take place, revealing a chemically, energetically, and experimentally plausible structure of metakaolin. This methodology of density functional modeling of the stepwise changes in a material is not limited in application to kaolinite or other aluminosilicates and provides an accurate representation of the local structural changes occurring in materials used in industrially important processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energetics and Structure of Ag–Water Clusters Formed in Mordenite

Zeolite-supported Ag 0 clusters have broad applications from catalysis to medicine, necessitating a mechanistic understanding of the formation of Ag 0 clusters in situ. Density functional theory (DFT) simulations have been performed on silver, water, and silver–water clusters in silica mordenite (Si-MOR), to identify the role of the confinement on the structure and energetics of Ag 0 cluster formation. The most favorable binding energy in the 12-membered ring (MR) pore of the Si-MOR is a 10–15-atom Ag 0 cluster. Computational pair distribution function (PDF) data indicates that the Ag 0 and Ag 0 –H 2 O clusters formed in vacuum versus in Si-MOR exhibit structural differences. Additionally, when the Ag 0 cluster is confined, the density decreases and the surface area increases, hypothesized to be due to the limiting geometry of the 12-MR main channel. An energetic drive toward formation of larger Ag 0 clusters was also identified, with hydrated silver atoms generating higher energy structures. In conclusion, this work identifies mechanistic and structural insight into the role of nanoconfinement on formation of Ag 0 clusters in mordenite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Roles of Hydration and Magnetism on the Structure of Ferrihydrite from First Principles

We report density functional theory calculations aimed at predicting thermodynamically stable structures for ferrihydrite across a range of possible compositions determined by the amount of structural water. Based on an assumed formula unit of Fe5O8H + nH2O, we performed ab initio calculations with evolutionary searching to find the lowest enthalpy structures as a function of the water content up to n = 2. This is the most exhaustive search for the ferrihydrite structure conducted so far; more than 5000 unique configurations were generated and evaluated over five states of hydration. Among them, the Michel akdaliate model was generated, along with several energetically comparable new structures at higher states of hydration. However, a direct comparison between calculated and experimental pair distribution function and X-ray diffraction patterns for the 50 lowest energy structures shows that none beyond the Michel model could be associated with ferrihydrite. Nevertheless, this energetically comparable structure set provides a novel basis for analyzing and understanding the effects of hydration and magnetism on the topology of ferrihydrite, from which we conclude that any tetrahedral Fe should be viewed as a metastable structural defect, created either as a result of the rapid kinetics of crystal growth or to accommodate a local magnetic stress between neighboring Fe atoms.

composition, density functional theory, ferrihydri↗

Anisotropy of stress correlation in two-dimensional liquids and a pseudospin model

Liquids are condensed matter in which atoms are strongly correlated in position and momentum. The atomic pair density function (PDF) is used often in describing such correlation. However, elucidation of many properties requires higher degrees of correlation than the pair correlation. For instance, viscosity depends upon the stress correlations in space and time. We examine the cross correlation between the stress correlation at the atomic level and the PDF for two-dimensional liquids. We introduce the concept of the stress-resolved pair distribution function (SRPDF) that uses the sign of atomic-level stress as a selection rule to include particles from density correlations. The connection between SRPDFs and stress correlation function is explained through an approximation in which the shear stress is replaced by a pseudospin. Lastly, we further assess the possibility of interpreting the long-range stress correlation as a consequence of short-range Ising-like pseudospin interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ensemble averaged structure–function relationship for nanocrystals: effective superparamagnetic Fe clusters with catalytically active Pt skin [Ensemble averaged structure-function relationship for composite nanocrystals: magnetic bcc Fe clusters with catalytically active fcc Pt skin]

Practical applications require the production and usage of metallic nanocrystals (NCs) in large ensembles. Besides, due to their cluster-bulk solid duality, metallic NCs exhibit a large degree of structural diversity. This poses the question as to what atomic-scale basis is to be used when the structure–function relationship for metallic NCs is to be quantified precisely. In this paper, we address the question by studying bi-functional Fe core-Pt skin type NCs optimized for practical applications. In particular, the cluster-like Fe core and skin-like Pt surface of the NCs exhibit superparamagnetic properties and a superb catalytic activity for the oxygen reduction reaction, respectively. We determine the atomic-scale structure of the NCs by non-traditional resonant high-energy X-ray diffraction coupled to atomic pair distribution function analysis. Using the experimental structure data we explain the observed magnetic and catalytic behavior of the NCs in a quantitative manner. Lastly, we demonstrate that NC ensemble-averaged 3D positions of atoms obtained by advanced X-ray scattering techniques are a very proper basis for not only establishing but also quantifying the structure–function relationship for the increasingly complex metallic NCs explored for practical applications.

36 MATERIALS SCIENCE↗

Carbon doping in GeTe drives differences in local structure and properties

Advances in low-power, energy-efficient information storage and computing require understanding and controlling the atomic and nanoscale structures of functional materials, such as phase-change materials. Phase-change memory technology enables nonvolatile, low-power memory in devices by storing information through reversible changes in a phase-change material's atomic structure (i.e., transformations between amorphous and crystalline phases) that have corresponding changes in properties, including electronic resistivity and optical reflectivity. Here, we apply complementary X-ray absorption spectroscopy and X-ray pair distribution function analyses to experimentally identify the local- and medium-range atomic structure differences of GeTe and C-doped GeTe thin films. Upon controlled heating, composition- and temperature-dependent atomic structure evolution in GeTe and C-doped GeTe films shows differences in bonding behavior and local structure that directly influence crystallization onset temperature. We find that the introduction of C interrupts Ge–Ge bonds in amorphous GeTe, altering the as-deposited structure to be more similar to the distorted rocksalt structure of crystalline α–GeTe. The change alters the response of the amorphous atomic structure to heating and also lowers the crystallization onset temperature, from 230 °C in GeTe to 220 °C in the C-doped film. The combined insights from both X-ray techniques provide understanding of structural transformations that enables the development and optimization of next-generation memory and computing materials.

36 MATERIALS SCIENCE↗

Thermodynamic and structural evolution of mechanically milled and swift heavy ion irradiated Er 2 Ti 2 O 7 pyrochlore

Design and synthesis of thermodynamically metastable yet kinetically achievable materials possessing various desired functional and physical properties have recently drawn tremendous scientific-attention. In addition to conventional heat treatments and wet chemistry approaches, energy deposition into materials can induce unique nonequilibrium phases with distinct structures, chemistry, energetics, and properties. Mechanochemical synthesis and ion beam irradiation are two processing techniques that provide access to phases and states far from equilibrium. By a combination of high temperature oxide melt solution calorimetry, differential scanning calorimetry (DSC), neutron pair distribution function (PDF) analysis, and supplementary powder X-ray diffraction (XRD), the energetics and multiscale structural evolution on annealing of ball milled and swift heavy ion irradiated Er 2 Ti 2 O 7 pyrochlore were investigated. Despite very similar structural modifications of local atomic arrangements and only minor differences in the long range structure, both types of damage yield significant difference in the energetics of the produced material. Here, the energy of destabilization in the milled sample (70.2 ± 8.2 kJ/mol) is much less endothermic than that in the irradiated sample (457.3 ± 8.0 kJ/mol). The DSC profiles, supported by neutron scattering, X-ray diffraction, and solution calorimetry, reveal decoupled annealing events in different temperature ranges, separating crystallization of long range pyrochlore structure from annealing of short range weberite-like domains.

36 MATERIALS SCIENCE↗

Hybrid Inorganic-Organic Materials with an Optoelectronically Active Aromatic Cation: (C 7 H 7 ) 2 SnI 6 and C 7 H 7 PbI 3

Inorganic materials with organic constituents—hybrid materials—have shown incredible promise as chemically tunable functional materials with interesting optical and electronic properties. Here, the preparation and structure are reported of two hybrid materials containing the optoelectronically active tropylium ion within tin- and lead-iodide inorganic frameworks with distinct topologies. The crystal structures of tropylium tin iodide, (C 7 H 7 ) 2 SnI 6 , and tropylium lead iodide, C 7 H 7 PbI 3 , were solved using high-resolution synchrotron powder X-ray diffraction informed by X-ray pair distribution function data and high-resolution time-of-flight neutron diffraction. Tropylium tin iodide contains isolated tin(IV)-iodide octahedra and crystallizes as a deep black solid, while tropylium lead iodide presents one-dimensional chains of face-sharing lead(II)-iodide octahedra and crystallizes as a bright red-orange powder. Experimental diffuse reflectance spectra are in good agreement with density functional calculations of the electronic structure. Calculations of the band decomposed charge densities suggest that the deep black color of tropylium tin iodide is attributed to iodide ligand to tin metal charge transfer, while the bright red-orange color of tropylium lead iodide arises from charge transfer between iodine and tropylium states. Understanding the origins of the observed optoelectronic properties of these two compounds, with respect to their distinct topologies and organic–inorganic interactions, provides insight into the design of tropylium-containing compounds for potential optical and electronic applications.

Maughan, Annalise E.↗

Effect of atomic size mismatch and chemical complexity on the local lattice distortion of BCC solid solution alloys

Here, the effects of atomic size mismatch and chemical complexity on the local lattice distortion of solid-solution alloys VNbTa, TiVNbMo, TiVNbMoTa and TiVNbMoTaWRe with body-centered cubic (BCC) structure are quantitatively studied with time-of-flight neutron total scattering, extended X-ray absorption fine structure (EXAFS) measurements and first principles calculations. Neutron atomic pair distribution function (PDF) measurements found that the local lattice distortion in the ternary solid-solution alloy VNbTa is 1.1 %, obviously larger than that of the most complicated solid-solution alloy (0.27% for TiVNbMoTaWRe). Our results suggested that atomic size mismatch in high entropy alloys is more critical to the local lattice distortion than chemical complexity. Both EXAFS analysis and theoretical calculations indicate that there is a maximum of ~4 % difference between the bonding length of different atomic pairs in VNbTa.

36 MATERIALS SCIENCE↗

Local structure, bonding, and asymmetry of $\mathrm{((NH_2)_2CH)PbBr_3}$, $\mathrm{CsPbBr_3}$, and $\mathrm{(CH_3MH_3)PbBr_3}$

Here we report local structure measurements for CsPbBr 3 and ((NH 2 ) 2 CH)PbBr 3 (FAPbBr 3 ) and compare them with recent results for (CH 3 NH 3 )PbBr 3 (MAPbBr 3 ). The Pb-Br bonding is similar for all three systems; the effective spring constants, κ, are comparable (ranging from 1.20 to 1.95 eV/Å 2 ), but small in magnitude indicating very soft materials. However, there are also important differences between the three systems. Static disorder is very small for CsPbBr3 but increases somewhat with the size of the organic molecular ions MA + and FA + . At room temperature, dynamic disorder dominates in all compounds. The thermal disorder of the Pb-Br pair distribution function (PDF), i.e., the Debye-Waller factor σ 2 follows a correlated Debye or Einstein model up to 300 K in CsPbBr 3 (orthorhombic phase), but for FAPbBr 3 and MAPbBr 3 , there is a break in the σ 2 (T) curve at the orthorhombic-tetragonal transition (o-t) near 150 K, indicating a small change in the spring constant κ. κ increases for MAPbBr 3 but decreases in FAPbBr 3 at this transition. These changes are attributed to changes in the H-bonding between Br - and MA + or FA + at this transition, as a result of librations or rotations of these molecular cations. In addition, the Pb-Br PDF becomes asymmetric at a relatively low temperature for FAPbBr 3 and MAPbBr 3 , while this effect is significantly smaller for CsPbBr 3 . Finally, we address the question of a model to explain the asymmetric PDF. Two main models are discussed in the literature, an anharmonic pair potential and a split-pair distribution, possibly driven by the presence of a lone pair on the Pb ion. We show that the fourth cumulant C 4 can differentiate between these two models and other possible models. Experimentally C 4 is positive at 250 K and above, for all three systems and that is inconsistent with a split-peak model, for which C 4 is negative for splittings larger than 0.12 Å.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗