Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oscillation analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

The functional integral with unconditional Wiener measure for anharmonic oscillator

In this article we propose the calculation of the unconditional Wiener measure functional integral with a term of the fourth order in the exponent by an alternative method as in the conventional perturbative approach. In contrast to the conventional perturbation theory, we expand into power series the term linear in the integration variable in the exponent. In such a case we can profit from the representation of the integral in question by the parabolic cylinder functions. We show that in such a case the series expansions are uniformly convergent and we find recurrence relations for the Wiener functional integral in the N-dimensional approximation. In continuum limit we find that the generalized Gelfand-Yaglom differential equation with solution yields the desired functional integral (similarly as the standard Gelfand-Yaglom differential equation yields the functional integral for linear harmonic oscillator)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mechanical joining with self piercing solid-rivets at elevated tool velocities

In the present paper the influence of a higher setting velocity in the joining process of self piercing solid-rivets is shown. In the conventional process tool velocities well below 1 m/s are common. The present research results show the potential of increasing them in the range of about 5 m/s. The results are especially relevant for joining high-strength steels. These steel sheets often cause problems in the process of riveting mixed materials, e. g. aluminium-steel compound. The high strength of the steel sometimes leads to undesirable material flow in the joining process or unwanted burr development. These effects, which are described in detail in the article, can be reduced significantly for the investigated cases by the use of higher tool velocities. Using a high speed camera and a load cell, a test setup based on a drop tower was realized. It was used to time the force signals and the motion profile of the high speed riveting process. The results of the force analysis show an oscillating force progression. Within a numerical research the principal effects influencing the results of the riveting process can be shown. It was found that the pulse-like force transmission between riveting machine and punch, results in various vibrations especially of long and thin tool parts. Hence the rivet penetrates the sheet metal with non-uniform velocities. As a result the early indentation of die into the lower sheet metal at the beginning of the process is reduced, so that the final process step provides a sufficient material flow into the circular rivet groove. A strain-rate dependent process model with elastic tool properties and consideration of inertia effects is presented.

36 MATERIALS SCIENCE↗

Long-range potential and the fine structure of the diffraction peak

The possibility of oscillations in the differential elastic cross section of hadron scattering at small momentum transfer is studied. It is shown that string-like quark potentials at large distances can lead to such small oscillations, and an analysis of the experimental data at small |t| allows the determination of the parameters of the potential.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Coherent acoustic phonons in YBa{sub 2}Cu{sub 3}O{sub 7}/La{sub 1/3}Ca{sub 2/3}MnO{sub 3} superlattices

We investigate photo-induced coherent acoustic phonons in complex oxide superlattices consisting of high-Tc superconductor YBa{sub 2}Cu{sub 3}O{sub 7−x} and ferromagnetic manganite La{sub 1/3}Ca{sub 2/3}MnO{sub 3} epitaxial layers with broadband pump-probe spectroscopy. Two oscillatory components have been observed in time-resolved differential reflectivity spectra. Based on the analysis, the slow oscillation mode with a frequency sensitive to the probe wavelength is ascribed to the stimulated Brillouin scattering due to the photon reflection by propagating train of coherent phonons. The fast oscillation mode with a probe-wavelength-insensitive frequency is attributed to the Bragg oscillations caused by specular phonon reflections at oxide interfaces or the electron-coupling induced modulation due to free carrier absorption in the metallic superlattices. Our findings suggest that oxide superlattice is an ideal system to tailor the coherent behaviors of acoustic phonons and to manipulate the thermal and acoustic properties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement of the mean excitation energy of liquid argon

The mean excitation energy (I-value) of liquid argon is a critical input for energy estimation in neutrino oscillation experiments. It is measured to be 199 +4 -5 eV using the range of 402.2 MeV protons from the Fermilab Linac. This compares to the author's recent evaluation of (197 ± 7) eV based on a combination of an oscillator strength distribution analysis, gaseous argon range measurements, sparse stopping power data on solid argon, and an extrapolation of data on the effect of phase from other substances. Using all sources of information, we recommend a value of (198 ± 4) eV for liquid argon, which is significantly higher than 188 eV, from ICRU-37's gaseous argon evaluation, commonly used in Monte Carlo codes such as Geant4.

47 OTHER INSTRUMENTATION↗

Ballistic magnetotransport in a suspended two-dimensional electron gas with periodic antidot lattices

The magnetoresistance of suspended semiconductor nanostructures with a two-dimensional electron gas structured by periodic square antidot lattices is studied. It is shown that the ballistic regime of electron transport is retained after detaching the sample from the substrate. Direct comparative analysis of commensurability oscillations of magnetoresistance and their temperature dependences in samples before and after suspension is performed. It is found that the temperature dependences are almost identical for non-suspended and suspended samples, whereas significant differences are observed in the nonlinear regime, caused by direct current passage. Commensurability oscillations in the suspended samples are more stable with respect to exposure to direct current, which can be presumably explained by electron–electron interaction enhancement after detaching nanostructures from the high-permittivity substrate.

36 MATERIALS SCIENCE↗

Beyond PCA: Additional Dimension Reduction Techniques to Consider in the Development of Climate Fingerprints

Abstract Dimension reduction techniques are an essential part of the climate analyst’s toolkit. Due to the enormous scale of climate data, dimension reduction methods are used to identify major patterns of variability within climate dynamics, to create compelling and informative visualizations, and to quantify major named modes such as El Niño–Southern Oscillation. Principal components analysis (PCA), also known as the method of empirical orthogonal functions (EOFs), is the most commonly used form of dimension reduction, characterized by a remarkable confluence of attractive mathematical, statistical, and computational properties. Despite its ubiquity, PCA suffers from several difficulties relevant to climate science: high computational burden with large datasets, decreased statistical accuracy in high dimensions, and difficulties comparing across multiple datasets. In this paper, we introduce several variants of PCA that are likely to be of use in climate sciences and address these problems. Specifically, we introduce non-negative , sparse , and tensor PCA and demonstrate how each approach provides superior pattern recognition in climate data. We also discuss approaches to comparing PCA-family results within and across datasets in a domain-relevant manner. We demonstrate these approaches through an analysis of several runs of the E3SM climate model from 1991 to 1995, focusing on the simulated response to the Mt. Pinatubo eruption; our findings are consistent with a recently identified stratospheric warming fingerprint associated with this type of stratospheric aerosol injection.

Weylandt, Michael↗

Recent changes in the ocean level

Analysis of the oscillations of the yearly average ocean levels, measured around the coasts of the world ocean, establishes a general rise in all observed ocean levels. This recent rise in ocean level is closely related to the general warming of the earth.

Kalinin, G. P.↗

H alpha oscillations in sunspot umbrae

Results are reported for direct measurement of intensity fluctuations and photographic subtractions of simultaneous Doppler filtergrams of H-alpha oscillations in sunspot umbrae. The observational techniques are described, and data are presented on the intensity variations, power spectra, and specific characteristics of the oscillations. Periods for the velocity oscillations are obtained by power spectrum analysis. It is found that the oscillations are apparently continuous, and that each umbra has its own characteristic period ranging from 145 to 180 plus or minus 10 sec and a duration of at least 8 cycles. A Doppler shift of 10 km/sec, an oscillating element size of 3 sec or less, and visibility to a radius vector of about 0.9 are also observed.

Phillis, G. L.↗

The effect of environmental plasma interactions on the performance of the solar sail system

Interaction between the solar sail and the natural plasma environment were examined for deleterious impacts upon the operation of the sail and its associated payload. Electrostatic charging of the sail in the solar wind and in near earth environment were examined. Deployment problems were studied. An analysis of electromechanical oscillations coupling the sail to the natural plasma was performed. As a result of these studies, it was concluded that none of these effects will have a significant negative impact upon the sail operation. The natural environment will be significantly perturbed and this will preclude measurements of electric and magnetic fields from an attached payload.

Douglas, M.↗

Periodic variations of precipitation in the tropical Atlantic Ocean

Statistical analysis of the satellite-borne Electrically Scanning Microwave Radiometer data in the tropical Atlantic region reveals that the rainfall near local noon is higher both in frequency of occurrence and intensity than the rainfall in the same area near local midnight. Another striking feature that stands out from the analysis is an oscillation with a period of 3.3. days in rainfall occurrence and intensity. This periodicty is consistent with easterly waves traveling from the African continent to the region under study.

Rao, M. S. V.↗

Non-linear dynamic response of a wind turbine blade

The paper outlines the nonlinear dynamic analysis of an isolated three-degree flap-lag-feather wind turbine blade under a gravity field and with shear flow. Lagrangian equations are used to derive the nonlinear equations of motion of blade for arbitrarily large angular deflections. The limit cycle analysis for forced oscillations and the determination of the principal parametric resonance of the blade due to periodic forces from the gravity field and wind shear are performed using the harmonic balance method. Results are obtained first for a two-degree flap-lag blade, then the effect of the third degree of freedom (feather) is studied. The self-excited flutter solutions are obtained for a uniform wind and with gravity forces neglected. The effects of several parameters on the blade stability are examined, including coning angle, structural damping, Lock number, and feather frequency. The limit cycle flutter solution of a typical configuration shows a substantial nonlinear softening spring behavior.

Chopra, I.↗

Flow measurements in a model swirl combustor

Flow measurements in a model combustor composed of two confined coaxial swirling jets under noncombusting conditions are presented. Mean flow results are obtained for five different flow conditions to determine the effect of outer swirl on the recirculation zone (which is used for flame stabilization under combustion conditions). As the outer swirl magnitude is first decreased from maximum counter-swirl to zero and then increased to give co-swirl conditions, the size and the reverse flow velocity in the recirculation zone diminish. Detailed time mean and fluctuating flow measurements are obtained for a co-swirl and a counter-swirl condition with a directional pitot probe and hot-wire anenometry. For these two cases, recirculation zone occurs only with counter-swirl, near the exit of the inner jet. The recirculation zone is in the form of a one celled toroidal vortex having very low swirl velocity. Axial development of fluctuation levels, energy dissipation rates and turbulence length scales are described for the two flow conditions. Spectral analysis reveals periodic oscillations in both flows. The oscillations originate from the inner jet and up to 4 harmonics are observed. The fundamental frequencies are comparable to the rotational frequencies of the inner jets at the exit which are approximately under solid body rotation. The significance of the present results for the combustion process is discussed.

Vu, B. T.↗

Approximate constants of motion for classically chaotic vibrational dynamics - Vague tori, semiclassical quantization, and classical intramolecular energy flow

Substantial short time regularity, even in the chaotic regions of phase space, is found for what is seen as a large class of systems. This regularity manifests itself through the behavior of approximate constants of motion calculated by Pade summation of the Birkhoff-Gustavson normal form expansion; it is attributed to remnants of destroyed invariant tori in phase space. The remnant torus-like manifold structures are used to justify Einstein-Brillouin-Keller semiclassical quantization procedures for obtaining quantum energy levels, even in the absence of complete tori. They also provide a theoretical basis for the calculation of rate constants for intramolecular mode-mode energy transfer. These results are illustrated by means of a thorough analysis of the Henon-Heiles oscillator problem. Possible generality of the analysis is demonstrated by brief consideration of classical dynamics for the Barbanis Hamiltonian, Zeeman effect in hydrogen and recent results of Wolf and Hase (1980) for the H-C-C fragment.

Shirts, R. B.↗

Interstellar absorption along the line of sight to Sigma Scorpii using Copernicus observations

From Copernicus observations of Sigma Sco, 57 individual lines of 11 elements plus the molecular species H2 and CO were identified. By using a profile-fitting technique, rather than curves of growth, it was possible to obtain column densities and Doppler b values for up to four separate components along this line of sight. Electron density in the major H I component was derived from the photoionization equilibrium of sulfur, obtaining, n(e) of about 0.3/cu cm. The neutral hydrogen density in the same component was also derived using fine-structure excitation of O I. An H II component is also present in which the electron density was n(e) about 20/cu cm. As a by-product of this analysis, previously undetermined oscillator strengths for two Mn II lines were obtained: for 1162.-017 A, f about 0.023 and for 1164.211 A, f about 0.0086.

Allen, M. M.↗

Analysis of helioseismic wave fields to examine horizontal structures

A preliminary inversion procedure that carries out a local area analysis on simulated oscillation data is presented and discussed. The procedure is carried out in order to deduce two dimensional subsurface structures in the horizontal plane, representative of thermal variations, as a function of depth. The aim is the evaluation of an inversion procedure that utilizes information gained from the phase distortion occurring in artificially generated acoustic waves in order to determine the subsurface thermal structure. These distortions would naturally occur as a direct consequence of convective motions in the solar interior.

Julien, K. A.↗