Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “numerical optimal control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Airfoil optimization by the one-shot method

An efficient numerical approach for the design of optimal aerodynamic shapes is presented in this paper. The objective of any optimization problem is to find the optimum of a cost function subject to a certain state equation (Governing equation of the flow field) and certain side constraints. As in classical optimal control methods, the present approach introduces a costate variable (Language multiplier) to evaluate the gradient of the cost function. High efficiency in reaching the optimum solution is achieved by using a multigrid technique and updating the shape in a hierarchical manner such that smooth (low-frequency) changes are done separately from high-frequency changes. Thus, the design variables are changed on a grid where their changes produce nonsmooth (high-frequency) perturbations that can be damped efficiently by the multigrid. The cost of solving the optimization problem is approximately two to three times the cost of the equivalent analysis problem.

Kuruvila, G.↗
NASA NTRS1995

Airfoil Design and Optimization by the One-Shot Method

An efficient numerical approach for the design of optimal aerodynamic shapes is presented in this paper. The objective of any optimization problem is to find the optimum of a cost function subject to a certain state equation (governing equation of the flow field) and certain side constraints. As in classical optimal control methods, the present approach introduces a costate variable (Lagrange multiplier) to evaluate the gradient of the cost function. High efficiency in reaching the optimum solution is achieved by using a multigrid technique and updating the shape in a hierarchical manner such that smooth (low-frequency) changes are done separately from high-frequency changes. Thus, the design variables are changed on a grid where their changes produce nonsmooth (high-frequency) perturbations that can be damped efficiently by the multigrid. The cost of solving the optimization problem is approximately two to three times the cost of the equivalent analysis problem.

Kuruvila, G.↗
NASA NTRS2012

A Comprehensive Structural Dynamic Analysis Approach for Multi Mission Earth Entry Vehicle (MMEEV) Development

The anticipated NASA Mars Sample Return Mission (MSR) requires a simple and reliable method in which to return collected Martian samples back to earth for scientific analysis. The Multi-Mission Earth Entry Vehicle (MMEEV) is NASA's proposed solution to this MSR requirement. Key aspects of the MMEEV are its reliable and passive operation, energy absorbing foam-composite structure, and modular impact sphere (IS) design. To aid in the development of an EEV design that can be modified for various missions requirements, two fully parametric finite element models were developed. The first model was developed in an explicit finite element code and was designed to evaluate the impact response of the vehicle and payload during the final stage of the vehicle's return to earth. The second model was developed in an explicit code and was designed to evaluate the static and dynamic structural response of the vehicle during launch and reentry. In contrast to most other FE models, built through a Graphical User Interface (GUI) pre-processor, the current model was developed using a coding technique that allows the analyst to quickly change nearly all aspects of the model including: geometric dimensions, material properties, load and boundary conditions, mesh properties, and analysis controls. Using the developed design tool, a full range of proposed designs can quickly be analyzed numerically and thus the design trade space for the EEV can be fully understood. An engineer can then quickly reach the best design for a specific mission and also adapt and optimize the general design for different missions.

Perino, Scott↗
NASA NTRS1977

A numerical analysis for a comparative study of the pointing accuracy of flexible satellites

The analytical models for flexible satellites have been reported earlier. Numerical results comparing the pointing accuracy of three-axes stabilized, spinning, and dual-spin satellites are presented here. The responses are compared for deterministic and random models with and without external torques. The performances of a uniform control system have been compared to a time-optimal control system for the same base-line configurations.

Huang, T. C.↗
NASA NTRS1986

Static deflection control of flexible beams by piezo-electric actuators

This study deals with the utilization of piezo-electric actuators in controlling the static deformation of flexible beams. An optimum design procedure is presented to enable the selection of the optimal location, thickness and excitation voltage of the piezo-electric actuators in a way that would minimize the deflection of the beam to which these actuators are bonded. Numerical examples are presented to illustrate the application of the developed optimization procedure in minimizing the structural deformation of beams of different materials when subjected to different loading and end conditions using ceramic or polymeric piezo-electric actuators. The results obtained emphasize the importance of the devised rational procedure in designing beam-actuator systems with minimal elastic distortions.

Baz, A. M.↗
NASA NTRS1987

Frequency domain synthesis of optimal inputs for adaptive identification and control

The input design problem of selecting appropriate inputs for use in SISO adaptive identification and model reference adaptive control algorithms is considered. Averaging theory is used to characterize the optimal inputs in the frequency domain. The design problem is formulated as an optimization problem which maximizes the smallest eigenvalue of the average information matrix over power constrained signals, and the global optimal solution is obtained using a convergent numerical algorithm. A bound on the frequency search range required in the design algorithm has been determined in terms of the desired performance.

Fu, Li-Chen↗
NASA NTRS1988

An approximation technique for computing optimal fixed-order controllers for infinite-dimensional systems

The finite-dimensional approximation of the infinite-dimensional Bernstein/Hyland optimal projection theory is investigated analytically. The approach yields fixed-finite-order controllers which are optimal with respect to high-order approximating finite-dimensional plant models. The technique is illustrated by computing a sequence of first-order controllers for a one-dimensional SISO parabolic (heat/diffusion) system using a spline-based Ritz-Galerkin finite-element approximation. The numerical studies indicate convergence of the feedback gains with less than 2-percent performance degradation over full-order LQG controllers.

Bernstein, Dennis S.↗
NASA NTRS1999

Robust Passification via Optimal Sensor Blending and Control Allocation

Robust passification is considered for uncertain linear, time invariant, systems having redundant actuators and sensors. The approach is to obtain optimal sensor blending and control allocation matrices that maximize the region in the parameter space in which the system remains passive. The approach results in a generalized eigenvalue problem consisting of a number of linear matrix inequalities (LMIs). Reduction of the number of LMIs is investigated, and a numerical example is given for demonstrating the approach.

Joshi, S. M.↗
NASA NTRS1999

Robust Passification via Optimal Sensor Blending and Control Allocation

Robust passification is considered for uncertain linear, time invariant systems having redundant actuators and sensors. The approach is to obtain optimal sensor blending and control allocation matrices that maximize the region in the parameter space in which the system remains passive. The approach results in a generalized eigenvalue problem consisting of a number of linear matrix inequalities (LMIs). Reduction of the number of LMIs is investigated, and a numerical example is given for demonstrating the approach.

Joshi, S. M.↗
NASA NTRS1989

Thrust vectoring effect on time-optimal 90 degrees angle of attack pitch up maneuvers of a high alpha fighter aircraft

Using thrust vectoring, the problem of pitching up a high alpha fighter aircraft to 90 degrees angle of attack in minimum time is considered. Pontryagin's maximum principle is used together with a two-point boundary value numerical algorithm to derive open-loop controls for various parameterized limits on thrust vectoring angles. Without thrust vectoring, a high alpha fighter with initial conditions 0.6 Mach number and 15,000 feet requires 7.0 seconds to pitch-up to 90 degrees. However, with 20-degree angle thrust vectoring, the pitch-up takes only 1.5 seconds with a final Mach number of 0.47. Also, the gain in altitude is less than 100 feet. More important, additional thrust vectoring yields litle benefit beyond the 20-degree angles. This paper describes control solutions in detail for thrust vectoring angles between 0 and 90 degrees.

Stalford, Harold↗
NASA NTRS1988

Finite-dimensional approximation for optimal fixed-order compensation of distributed parameter systems

In controlling distributed parameter systems it is often desirable to obtain low-order, finite-dimensional controllers in order to minimize real-time computational requirements. Standard approaches to this problem employ model/controller reduction techniques in conjunction with LQG theory. In this paper we consider the finite-dimensional approximation of the infinite-dimensional Bernstein/Hyland optimal projection theory. This approach yields fixed-finite-order controllers which are optimal with respect to high-order, approximating, finite-dimensional plant models. The technique is illustrated by computing a sequence of first-order controllers for one-dimensional, single-input/single-output, parabolic (heat/diffusion) and hereditary systems using spline-based, Ritz-Galerkin, finite element approximation. Numerical studies indicate convergence of the feedback gains with less than 2 percent performance degradation over full-order LQG controllers for the parabolic system and 10 percent degradation for the hereditary system.

Bernstein, Dennis S.↗
NASA NTRS1993

Sensitivity analysis of Lyapunov and Riccati equations with application to controls-structures integrated design

Controls-structure integrated design is a complicated multidisciplinary design optimization problem which involves the state equations pertaining to open-loop eigenvalues and control laws. In order to alleviate the intensity of the computation, this study uses the adjoint variable method to derive sensitivity equations for the eigenvalue, Liapunov, and Riccati equations. These individual sensitivity equations are then combined together to form the multidisciplinary sensitivity equations for the control structure integrated design problems. A set of linear sensitivity equations, proportional in number to the number of performance functions involved in the optimization process, are solved. This proposed approach may provide a great saving in computer resources. The validity of the newly developed sensitivity equations is verified by numerical examples.

Hou, Gene↗
NASA NTRS1994

Development of homotopy algorithms for fixed-order mixed H2/H(infinity) controller synthesis

A major difficulty associated with H-infinity and mu-synthesis methods is the order of the resulting compensator. Whereas model and/or controller reduction techniques are sometimes applied, performance and robustness properties are not preserved. By directly constraining compensator order during the optimization process, these properties are better preserved, albeit at the expense of computational complexity. This paper presents a novel homotopy algorithm to synthesize fixed-order mixed H2/H-infinity compensators. Numerical results are presented for a four-disk flexible structure to evaluate the efficiency of the algorithm.

Whorton, M.↗
NASA NTRS1988

Approximation theory for LQG (Linear-Quadratic-Gaussian) optimal control of flexible structures

An approximation theory is presented for the LQG (Linear-Quadratic-Gaussian) optimal control problem for flexible structures whose distributed models have bounded input and output operators. The main purpose of the theory is to guide the design of finite dimensional compensators that approximate closely the optimal compensator. The optimal LQG problem separates into an optimal linear-quadratic regulator problem and an optimal state estimation problem. The solution of the former problem lies in the solution to an infinite dimensional Riccati operator equation. The approximation scheme approximates the infinite dimensional LQG problem with a sequence of finite dimensional LQG problems defined for a sequence of finite dimensional, usually finite element or modal, approximations of the distributed model of the structure. Two Riccati matrix equations determine the solution to each approximating problem. The finite dimensional equations for numerical approximation are developed, including formulas for converting matrix control and estimator gains to their functional representation to allow comparison of gains based on different orders of approximation. Convergence of the approximating control and estimator gains and of the corresponding finite dimensional compensators is studied. Also, convergence and stability of the closed-loop systems produced with the finite dimensional compensators are discussed. The convergence theory is based on the convergence of the solutions of the finite dimensional Riccati equations to the solutions of the infinite dimensional Riccati equations. A numerical example with a flexible beam, a rotating rigid body, and a lumped mass is given.

Gibson, J. S.↗
NASA NTRS1975

Problems, questions and results in the use of the BBN-model

A hierarchical structured control model was used to describe pilot performance in a multivariable control problem. The model is based on the assumption that a well trained operator optimized a quadratic optimization criterion. The model considers some special characteristics of the human operator as time delay, neuromuscular time lag, observation and motor noise and the ability to extract the first derivative of a displaced value. Numerical results of a simple human engineering example using the BBN model demonstrate the influence of the variation of different parameters on covariance matrices of the state and observation vectors.

Dey, D.↗
NASA NTRS1987

Optimum shape control of flexible beams by piezo-electric actuators

The utilization of piezoelectric actuators in controlling the static deformation and shape of flexible beams is examined. An optimum design procedure is presented to enable the selection of the optimal location, thickness and excitation voltage of the piezoelectric actuators in a way that would minimize the deflection of the beam to which these actuators are bonded. Numerical examples are presented to illustrate the application of the developed optimization procedure in minimizing structural deformation of beams using ceramic and polymeric piezoelectric actuators bonded to the beams with a typical bonding agent. The obtained results emphasize the importance of the devised rational produce in designing beam-actuator systems with minimal elastic distortions.

Baz, A.↗
NASA NTRS1989

STRUTEX: A prototype knowledge-based system for initially configuring a structure to support point loads in two dimensions

Only recently have engineers begun making use of Artificial Intelligence (AI) tools in the area of conceptual design. To continue filling this void in the design process, a prototype knowledge-based system, called STRUTEX has been developed to initially configure a structure to support point loads in two dimensions. This prototype was developed for testing the application of AI tools to conceptual design as opposed to being a testbed for new methods for improving structural analysis and optimization. This system combines numerical and symbolic processing by the computer with interactive problem solving aided by the vision of the user. How the system is constructed to interact with the user is described. Of special interest is the information flow between the knowledge base and the data base under control of the algorithmic main program. Examples of computed and refined structures are presented during the explanation of the system.

Robers, James L.↗