SEARCH · Engineering Papers

Results for “mixed precision”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

NASA NTRS2005

Characterization of Layered Deposits inside Valles Marineris

This report represents the final progress report on our study of the Melas Chasma region on Mars that was proposed as a landing site for the Mars Exploration Rover mission (MER). During this two-year proposal (which was extended over three years by a no-cost extension), we conducted a thorough study of the layered deposits in western Melas Chasma that had been the location of a high priority MER mission landing ellipse within Valles Marineris. All available data sets from orbiter missions, including MOC, MOLA, THEMIS visible and infrared images were all used to analyze this site. The major outcome of this work was a published paper in the Journal of Geophysics and Research Planets [Weitz et al., 2004]. Our geologic mapping and interpretation of the MOC images suggest the landing ellipse contains three main geomorphologic units: (1) a blocky deposit consisting of bright blocks in a darker matrix (BD); (2) sand sheets composed of dark dunes; and (3) landslide deposits emanating from the wallrock to the west [Weitz et al., 2003]. Furthermore, we propose that the morphology of the BD unit in western Melas is a mass wasting deposit composed of blocks of Interior Layered Deposits (ILDs) mixed in with wallrock material. However, more recent MOC images indicate that in the eastern portion of the ellipse and adjacent to a large hill, there are blocks of material resembling those seen in BD. Hence, we cannot rule out the source of BD was this hill. Unfortunately, sand dunes obscure much of the deposit around this hill, making it impossible to precisely determine the connection between the hill and BD, whereas BD can be traced directly to the southern Melas wallrock. If BD resulted from a mass wasting event in the southern wallrock, then we would expect the material to be concentrated further to the north, as now appears to be the case. In summary, the exact source location for BD continues to remain a mystery, but we favor an origin from either the southern wallrock [Weitz et el., 2002] or the eastern hill.

Weitz, Catherine↗

NASA NTRS2015

Low Cost Upper Stage-Class Propulsion (LCUSP)

NASA is making space exploration more affordable and viable by developing and utilizing innovative manufacturing technologies. Technology development efforts at NASA in propulsion are committed to continuous innovation of design and manufacturing technologies for rocket engines in order to reduce the cost of NASA's journey to Mars. The Low Cost Upper Stage-Class Propulsion (LCUSP) effort will develop and utilize emerging Additive Manufacturing (AM) to significantly reduce the development time and cost for complex rocket propulsion hardware. Benefit of Additive Manufacturing (3-D Printing) Current rocket propulsion manufacturing techniques are costly and have lengthy development times. In order to fabricate rocket engines, numerous complex parts made of different materials are assembled in a way that allow the propellant to collect heat at the right places to drive the turbopump and simultaneously keep the thrust chamber from melting. The heat conditioned fuel and oxidizer come together and burn inside the combustion chamber to provide thrust. The efforts to make multiple parts precisely fit together and not leak after experiencing cryogenic temperatures on one-side and combustion temperatures on the other is quite challenging. Additive manufacturing has the potential to significantly reduce the time and cost of making rocket parts like the copper liner and Nickel-alloy jackets found in rocket combustion chambers where super-cold cryogenic propellants are heated and mixed to the extreme temperatures needed to propel rockets in space. The Selective Laser Melting (SLM) machine fuses 8,255 layers of copper powder to make a section of the chamber in 10 days. Machining an equivalent part and assembling it with welding and brazing techniques could take months to accomplish with potential failures or leaks that could require fixes. The design process is also enhanced since it does not require the 3D model to be converted to 2-D drawings. The design and fabrication process can be sped up and improved with fewer errors to be accomplished in weeks instead of months.

Vickers, John↗

DOE OSTI2024

Rewritable Surface‐Grafted Polymer Brushes with Dynamic Covalent Linkages

Abstract Surface grafting of polymer brushes drastically modifies surface properties, including wettability, compatibility, responsiveness, etc. A broad variety of functionalities can be introduced to the surface via different types of polymers. Bringing together properties of two or more types of polymer brushes to one surface opens up even more possibilities in brush‐modified materials. However, while it is generally feasible to introduce several chemical compositions along the brushes via copolymerization, it is challenging to vary the types of polymer brushes along a surface. Although previous studies have demonstrated binary brushes via orthogonal polymerization techniques or partial deactivation/regrafting, they commonly limit the number of polymer types to two. Here, we propose a strategy to introduce dynamic covalent diketoenamine linkages at the root of polymer brushes. The grafting density could be precisely tuned during surface functionalization. The surface‐anchored polymer brushes were cleaved by the addition of small molecule amines. New polymer brushes can be regrafted from the surface following refunctionalization of exposed sites. The maneuverability allows tuning of the types and densities of the polymer brushes, pointing the way to the preparation of a new generation of well‐defined brush‐modified materials with mixed grafts, with potential applications in the design of smart materials and surfaces.

Cui, Feichen↗

DOE OSTI2025

Assessment of Low-Level Pu Isotope Ratio Measurements Using Multicollector Inductively Coupled Plasma Mass Spectrometry (MC-ICP-MS/MS) Equipped with a Pre-Mass Filter

We present an initial investigation into the performance of a multicollector inductively coupled plasmamass spectrometer equipped with a pre-mass filter (Neoma MC-ICP-MS/MS) for making plutonium (Pu) isotope ratio measurements on solutions containing low level (i.e., pg mL –1 ) Pu concentrations. This assessment was achieved by comparison of the 240 Pu/ 239 Pu, 241 Pu/ 239 Pu, and 242 Pu/ 239 Pu ratios attained over a one month period on the MC-ICP-MS/MS with the long-term (∼1 year) performance observed on the predecessor MC-ICP-MS (Neptune Plus) instrument each equipped with an equipped with an APEXΩ desolvating nebulizer for repeated measurements of certified reference materials from New Brunswick Program Office (NBL PO) CRM 136a and CRM 137. The MC-ICP-MS/MS performance of repeated measurement of CRM 136a (n = 20) resulted in mean values of 240 Pu/ 239 Pu = 0.1448 ± 0.0006, 241 Pu/ 239 Pu = 0.00371 ± 0.00006, and 242 Pu/ 239 Pu = 0.00682 ± 0.00006 (k = 2). The CRM 137 (n = 20), analyzed during the same analytical sessions, produced mean values for 240 Pu/ 239 Pu = 0.2414 ± 0.0006, 241 Pu/ 239 Pu = 0.00464 ± 0.00007, and 242 Pu/ 239 Pu = 0.0157 ± 0.0001 (k = 2). These results closely align with the certificate values for CRM 136a and CRM 137 and are within the k = 2 envelopes defined by the long-term performance of the traditional MC-ICP-MS approach (Neptune Plus). Examination of the performance of the various Pu isotope ratios as a function of total Pu content revealed accurate results (<3% relative difference, or RD) above ∼50 fg total Pu. The results presented here demonstrate the capability of the MC-ICP-MS/MS making accurate and precise low level Pu isotopic measurements. While the intent of this work was not to investigate the functionality of the collision cell, the pre-mass filter was employed. Future studies are warranted to investigate the entire capability of the MC-ICP-MS/MS collision cell and pre-cell mass filter optimization for performing low level Pu isotope measurements, even in mixed matrix samples.

CRM↗

NASA NTRS2002

Quantifying Fractional Ground Cover on the Climate Sensitive High Plains Using AVIRIS and Landsat TM Data

The High Plains is an economically important and climatologically sensitive region of the United States and Canada. The High Plains contain 100,000 sq km of Holocene sand dunes and sand sheets that are currently stabilized by natural vegetation. Droughts and the larger threat of global warming are climate phenomena that could cause depletion of natural vegetation and make this region susceptible to sand dune reactivation. This thesis is part of a larger study that is assessing the effect of climate variability on the natural vegetation that covers the High Plains using Landsat 5 and Landsat 7 data. The question this thesis addresses is how can fractional vegetation cover be mapped with the Landsat instruments using linear spectral mixture analysis and to what accuracy. The method discussed in this thesis made use of a high spatial and spectral resolution sensor called AVIRIS (Airborne Visible and Infrared Imaging Spectrometer) and field measurements to test vegetation mapping in three Landsat 7 sub-scenes. Near-simultaneous AVIRIS images near Ft. Morgan, Colorado and near Logan, New Mexico were acquired on July 10, 1999 and September 30, 1999, respectively. The AVIRIS flights preceded Landsat 7 overpasses by approximately one hour. These data provided the opportunity to test spectral mixture algorithms with AVIRIS and to use these data to constrain the multispectral mixed pixels of Landsat 7. The comparisons of mixture analysis between the two instruments showed that AVIRIS endmembers can be used to unmix Landsat 7 data with good estimates of soil cover, and reasonable estimates of non-photosynthetic vegetation and green vegetation. Landsat 7 derived image endmembers correlate with AVIRIS fractions, but the error is relatively large and does not give a precise estimate of cover.

Warner, Amanda Susan↗

DOE OSTI2020

What can we learn from N 2 O isotope data? – Analytics, processes and modelling

The isotopic composition of nitrous oxide (N 2 O) provides useful information for evaluating N 2 O sources and budgets. Due to the co–occurrence of multiple N 2 O transformation pathways, it is, however, challenging to use isotopic information to quantify the contribution of distinct processes across variable spatiotemporal scales. Here, we present an overview of recent progress in N 2 O isotopic studies and provide suggestions for future research, mainly focusing on: analytical techniques; production and consumption processes; and interpretation and modelling approaches. Comparing isotope–ratio mass spectrometry (IRMS) with laser absorption spectroscopy (LAS), we conclude that IRMS is a precise technique for laboratory analysis of N 2 O isotopes, while LAS is more suitable for in situ/inline studies and offers advantages for site–specific analyses. When reviewing the link between the N 2 O isotopic composition and underlying mechanisms/processes, we find that, at the molecular scale, the specific enzymes and mechanisms involved determine isotopic fractionation effects. In contrast, at plot–to–global scales, mixing of N 2 O derived from different processes and their isotopic variability must be considered. We also find that dual isotope plots are effective for semi–quantitative attribution of co–occurring N 2 O production and reduction processes. More recently, process–based N 2 O isotopic models have been developed for natural abundance and 15 N–tracing studies, and have been shown to be effective, particularly for data with adequate temporal resolution. Here, despite the significant progress made over the last decade, there is still great need and potential for future work, including development of analytical techniques, reference materials and inter–laboratory comparisons, further exploration of N 2 O formation and destruction mechanisms, more observations across scales, and design and validation of interpretation and modelling approaches. Synthesizing all these efforts, we are confident that the N 2 O isotope community will continue to advance our understanding of N 2 O transformation processes in all spheres of the Earth, and in turn to gain improved constraints on regional and global budgets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Observation of Synchronization between Two Quantum van der Pol Oscillators in Trapped Ions

Synchronization is a hallmark of collective behavior that emerges when nonlinear systems interact, spanning scales from mechanical oscillators to planetary orbits. As a universal phenomenon, it underpins the study of complex systems and has far-reaching technological implications. While classical synchronization has a long and rich history, it has not been observed experimentally between multiple quantum limit-cycle oscillators despite a decade of theoretical investigations. We realize synchronization between two quantum van der Pol oscillators by engineering dissipation in a mixed-isotope trapped-ion quantum simulator. The synchronized state is encoded in a fixed relative phase between the oscillators that is inaccessible to individual measurements and revealed only through joint readout of both oscillators, in stark contrast to the system in the (deterministic) classical limit where synchronization can be observed via individual phase measurements. We further show that the relative phase can be precisely controlled and that the chain of two oscillators can synchronize to an external field, suggesting applications in sensing. Our results provide a promising pathway for studying more complex synchronized quantum dynamics beyond two oscillators, where a theoretical treatment becomes increasingly challenging, and it remains to be understood whether genuinely quantum features persist in such cases.

Liu, Jiarui↗

DOE OSTI2021

A New Data Analysis Technique for Determining Mix Parameters from HED Experiments

In designing, analyzing, and understanding high-energy-density (HED) physics experiments, including inertial confinement fusion (ICF) experiments, we must contend with the extension of hydrodynamics to new regimes where additional physics, such as radiation transport and nuclear reactions, become important and coupled to the dynamics. Our most sophisticated models and understanding are based in classical, low-energy physics, since that is what we have the easiest access to creating and diagnosing. To assess our extrapolation of that understanding to the HED regime will require comparable precision in experiments and measurements. This is particularly the important in the case of hydrodynamic turbulence — most experiments are designed with one or two dimensions of symmetry, but at small scales hydrodynamics is generically observed to crumple into a fine structure of apparently random, three-dimensional eddies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2026

Systematic analysis of melt pool dynamics in laser processing of mixed powder feedstocks

Functionally graded materials (FGMs) fabricated via additive manufacturing of blended powders offer the potential to spatially tailor properties for new technologies, such as fusion first-wall systems, turbine blades, and spacecraft. However, processing these materials is difficult due to the multiplicity of processing parameters to optimize, all of which must be changed as substrate material, powder feedstock compositions, and melt pool dynamics evolve. Here, this work systematically evaluates the qualitative and quantitative effects of these variables on the melt pool size, shape, composition, and particle distribution in an exemplar Ti-Ta system, and connects the experimental results to Marangoni flow behavior and phenomena observed in other systems. Increasing laser power linearly increases melt pool size and layer thickness, driving engineering considerations such as part/geometrical tolerances. Decreasing laser velocity changes the melt pool shape from lenticular to convex and reduces chemical homogeneity due to extreme thermal and compositional gradients between the melt pool center and boundaries. Thermophysical property differences between the powder feedstock and substrate material, as well as the directionality of the gradient, affect dilution and melt pool dynamics, which in turn affect the melt pool boundary characteristics, shape, and uniformity. Mixed powder feedstocks of intermediate compositions do not behave according to linear interpolations between single-material endpoints, instead building taller and wider melt pools. As such, it is recommended to quantify process maps for at least one intermediate composition in the FGM or multi-material system of interest to ensure optimized processing parameters, predictable melt pool sizes and shapes, and compositional and spatial precision.

Dissimilar↗

DOE OSTI2021

MSSM at future Higgs factories *

Abstract In this work, we study the implications of Higgs precision measurements at future Higgs factories for the MSSM parameter space, focusing on the dominant stop sector contributions. We perform a multi-variable fit to both the signal strength for various Higgs decay channels at Higgs factories and the Higgs mass. The χ 2 fit results show sensitivity to m A , tan β , stop mass parameter m SUSY , and the stop left-right mixing parameter Xt. We also study the impact of the Higgs mass prediction on the MSSM and compare the sensitivities of different Higgs factories.

Physics↗

DOE OSTI2025

Triaxiality and shape dynamics in 70 Ge

The electromagnetic properties of low-lying states in 70 Ge were investigated via multi-step Coulomb excitation of a 70 Ge beam impinging on a 208 Pb target at the ATLAS facility of the Argonne National Laboratory. A total of 27 transitional elements and six diagonal matrix elements coupling 11 low-lying states, were extracted from the measured cross sections. These were used to calculate reduced transition probabilities, spectroscopic quadrupole moments, and rotational invariant shape parameters, providing enhanced precision and expanding on previous studies. The experimental data were compared within several theoretical frameworks, including the generalized triaxial rotor model, configuration interaction shell-model calculations, and computations within the combined frameworks of relativistic density functional theory and the five-dimensional collective Hamiltonian. The results demonstrate a good agreement with the experimental data and, in conjunction with calculations using a two-state mixing model, support significant triaxiality and strong mixing between the 0$^{+}_{1}$ and 0$^{+}_{2}$ states. This results in the magnitudes of their respective quadrupole deformations [β rms (0$^{+}_{1}$) = 0.228 (3), β rms (0$^{+}_{2}$) = 0.273 (1)] being more similar than previously observed. Furthermore, the implications of these results for understanding the complex shape coexistence phenomena, the role of triaxiality, and shape evolution along the Ge isotopic chain are discussed.

59 ≤ A ≤ 89↗

DOE OSTI2022

Multimorphic Materials: Spatially Tailoring Mechanical Properties via Selective Initiation of Interpenetrating Polymer Networks

Access to multimaterial polymers with spatially localized properties and robust interfaces is anticipated to enable new capabilities in soft robotics, such as smooth actuation for advanced medical and manufacturing technologies. Here, orthogonal initiation is used to create interpenetrating polymer networks (IPNs) with spatial control over morphology and mechanical properties. Base catalyzes the formation of a stiff and strong polyurethane, while blue LEDs initiate the formation of a soft and elastic polyacrylate. IPN morphology is controlled by when the LED is turned “on”, with large phase separation occurring for short time delays (≈1–2 min) and a mixed morphology for longer time delays (>5 min), which is supported by dynamic mechanical analysis, small angle X-ray scattering, and atomic force microscopy. Through tailoring morphology, tensile moduli and fracture toughness can be tuned across ≈1–2 orders of magnitude. Furthermore, a simple spring model is used to explain the observed mechanical behavior. Photopatterning produces “multimorphic” materials, where morphology is spatially localized with fine precision (<100 µm), while maintaining a uniform chemical composition throughout to mitigate interfacial failure. As a final demonstration, the fabrication of hinges represents a possible use case for multimorphic materials in soft robotics.

36 MATERIALS SCIENCE↗

DOE OSTI2024

The QCD axion sum rule

Abstract We demonstrate that the true QCD axion that solves the strong CP problem can be found in all generality outside the customary standard QCD band, with QCD being the sole source of Peccei-Quinn breaking. The essential reason is that the basis of axion-gluon interactions does not need to coincide with the mass basis. Specifically, we consider the case in which the QCD axion field is not the only singlet scalar in Nature but it mixes with other singlet scalars (besides theη′). We determine the exact mathematical condition for an arbitraryN-scalar potential to be Peccei-Quinn invariant. Such potentials provide extra sources of mass for the customary axion without enlarging the Standard Model gauge symmetry. The contribution to the axion mass stemming from the QCD topological susceptibility is shown to be shared then among theNaxion eigenstates through a precise sum rule. Their location can only be displaced to the right of the standard QCD band. We demonstrate that the axion closest to this band can be displaced from it by a factor of$$ \sqrt{N} $$ N at most, and this corresponds to the case in which all axion signals are maximally deviated. Conversely, if one axion is found on the standard QCD band, the other eigenstates will be out of experimental reach. Our results imply that any ALP experiment which finds a signal to the right of the standard QCD axion band can be solving the strong CP problem within QCD, with the associatedN− 1 excitations to be found in an area of parameter space that we determine. We illustrate the results and phenomenology in some particular cases.

Physics↗

DOE OSTI2021

Identifying higher oxygenate synthesis sites in Cu catalysts promoted and stabilized by atomic layer deposited Fe 2 O 3

The conversion of syngas to higher oxygenates is an important step in the pathway towards the long-term sustainable production of fuels and chemicals. Mixed Cu/Fe catalysts combine metals with different CO activation characteristics, a property that makes them promising candidates for higher oxygenate production. However, Cu/Fe catalysts suffer from instability due to sintering and phase separation, and the active sites for higher oxygenate formation on these materials are not well understood. In this work, we use atomic layer deposition (ALD) to modify silica-supported Cu nanoparticles with monolayer precise amounts of Fe 2 O 3 and study the effects on catalyst structure, reactivity, and stability. We demonstrate that the Fe 2 O 3 ALD process is inherently selective towards deposition on the SiO 2 surface versus the Cu nanoparticles. As a result, a sufficiently thick Fe 2 O 3 layer surrounding the Cu nanoparticles acts as a barrier against Cu migration, preventing catalyst deactivation through sintering without covering the Cu. In syngas conversion reactions, we find that higher oxygenate selectivity increases with Fe 2 O 3 loading at low and intermediate ALD cycle numbers. Furthermore, using in situ X-ray absorption spectroscopy, we demonstrate that the Fe near the Cu nanoparticles is reduced to a metallic state under reaction conditions. From these measurements, we identify these metallic Cu/Fe interfaces as the active sites for higher oxygenate formation, which are most abundant at intermediate Fe 2 O 3 ALD cycle numbers. As the Fe 2 O 3 loading increases, higher oxygenate selectivity falls, resulting from encapsulation of the Cu nanoparticles by thick Fe 2 O 3 layers. Overall, the results demonstrate how thickness-controlled ALD Fe 2 O 3 can be used as both a promoter and stabilizer of Cu-based higher oxygenate synthesis catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Variational Monte Carlo calculations of n + H 3 scattering

A paramount goal in nuclear physics is to unify ab initio treatments of bound and unbound states. The position-space quantum Monte Carlo (QMC) methods have a long history of successful bound-state calculations in light systems but have seen minimal implementation in unbound systems. Here, we introduce a numerical method to improve the efficiency and accuracy of unbound-state calculations in QMC. As an initial application, we compute scattering observables for the smallest system available to probe three-body forces, the neutron-triton system, using variational Monte Carlo (VMC) wave functions. The method involves inferring long-range amplitudes in the wave function from integrals over the short-range region where all the particles interact. This approach using integral relations is well established in the literature; here, we develop it for the QMC framework. We validate our approach with a consistency check between short-range spectroscopic overlap functions computed from direct evaluation and from the integral relations; scattering amplitudes are long-range asymptotics of those overlaps. Comparison against published benchmark calculations using the same potential demonstrates that when applied to the current VMC wave functions, the integral method produces more accurate scattering observables than direct evaluation from the same variational wave function. However, it still differs noticeably from the exact results. Using additional interactions, we then present phase shifts and mixing parameters for the n + 3 H system. In particular, we present one of the first applications of the Norfolk family of local coordinate-space chiral potentials in unbound systems of A > 2. The Norfolk results accurately describe s-wave scattering but predict p-wave cross sections too large. Compared with previous QMC scattering calculations, the integral method avoids difficulties associated with the precise computation of energy differences and with convergence outside the interaction region, which is particularly severe in the variational calculation. Application of the integral method here paves the way for its use in Green's function Monte Carlo (GFMC) calculations. In GFMC, the wave functions are more accurate, but the high-precision convergence of their tails is slow, and there are additional difficulties in reading out amplitudes. Here, the integral methods will address both of those remaining problems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2023

Physics of Neutrino Oscillations and Neutrino Cross Sections using the NOvA Experiment

NOvA is a long-baseline accelerator-based neutrino experiment based in the US. NOvA uses an intense neutrino beam produced at Fermilab’s accelerator complex to make physics measurements of neutrino oscillations, neutrino cross sections, and much more. For its physics goals, NOvA uses two functionally-identical detectors. The Near Detector (ND) is situated at Fermilab, 1 km from the neutrino target and the Far Detector (FD) is located at Ash River, MN, a distance of 810 km from the neutrino source. The ND receives a high statistics neutrino flux which gives a unique opportunity for high-precision neutrino cross-section measurements and is used as a control for the oscillation analyses. The FD is used to analyze the appearance and disappearance of the neutrinos arriving from the Fermilab. The purpose of the oscillation analysis is to understand the dominance of matter over antimatter in the universe, to resolve the ordering of neutrino masses, and to resolve the octant of the neutrino mixing angle theta23. In this talk, I will give an overview of the NOvA experiment. I will also talk about the status of the NOvA’s cross-section physics program and the latest results from the oscillation analyses. I will also talk about the future prospects of the experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS2011

NASA Tech Briefs, March 2011

Topics covered include: Optimal Tuner Selection for Kalman-Filter-Based Aircraft Engine Performance Estimation; Airborne Radar Interferometric Repeat-Pass Processing; Plug-and-Play Environmental Monitoring Spacecraft Subsystem; Power-Combined GaN Amplifier with 2.28-W Output Power at 87 GHz; Wallops Ship Surveillance System; Source Lines Counter (SLiC) Version 4.0; Guidance, Navigation, and Control Program; Single-Frame Terrain Mapping Software for Robotic Vehicles; Auto Draw from Excel Input Files; Observation Scheduling System; CFDP for Interplanetary Overlay Network; X-Windows Widget for Image Display; Binary-Signal Recovery; Volumetric 3D Display System with Static Screen; MMIC Replacement for Gunn Diode Oscillators; Feature Acquisition with Imbalanced Training Data; Mount Protects Thin-Walled Glass or Ceramic Tubes from Large Thermal and Vibration Loads; Carbon Nanotube-Based Structural Health Monitoring Sensors; Wireless Inductive Power Device Suppresses Blade Vibrations; Safe, Advanced, Adaptable Isolation System Eliminates the Need for Critical Lifts; Anti-Rotation Device Releasable by Insertion of a Tool; A Magnetically Coupled Cryogenic Pump; Single Piezo-Actuator Rotary-Hammering Drill; Fire-Retardant Polymeric Additives; Catalytic Generation of Lift Gases for Balloons; Ionic Liquids to Replace Hydrazine; Variable Emittance Electrochromics Using Ionic Electrolytes and Low Solar Absorptance Coatings; Spacecraft Radiator Freeze Protection Using a Regenerative Heat Exchanger; Multi-Mission Power Analysis Tool; Correction for Self-Heating When Using Thermometers as Heaters in Precision Control Applications; Gravitational Wave Detection with Single-Laser Atom Interferometers; Titanium Alloy Strong Back for IXO Mirror Segments; Improved Ambient Pressure Pyroelectric Ion Source; Multi-Modal Image Registration and Matching for Localization of a Balloon on Titan; Entanglement in Quantum-Classical Hybrid; Algorithm for Autonomous Landing; Quantum-Classical Hybrid for Information Processing; Small-Scale Dissipation in Binary-Species Transitional Mixing Layers; Superpixel-Augmented Endmember Detection for Hyperspectral Images; Coding for Parallel Links to Maximize the Expected Value of Decodable Messages; and Microwave Tissue Soldering for Immediate Wound Closure.

Source record↗

DOE OSTI2022

Origins of magnetic memory and strong exchange bias bordering magnetic compensation in mixed-lanthanide systems

Here, the unexpected physical phenomena resulting from the seemingly inconsequential substitutions of chemically similar lanthanide elements in the Pr 1-x Gd x ScGe system are exploited to further the understanding of rare-earth magnetism and inform materials design. By directly probing magnetic moments of crystallographically indistinguishable Pr and Gd we solve the puzzles of how an unusual magnetic memory and strong exchange bias emerge at specific, easily predictable chemistries. Both effects are rooted in a robust antiparallel arrangement of large 4f magnetic moments of light and heavy lanthanides. This enables precise control of nearly zero net magnetization either opposed to, or aligned with, the external magnetic field that persists over a wide range of temperatures and fields. Further, spontaneous perturbations in the random distribution of lanthanide ions makes strong exchange bias possible in bulk single-phase compounds bordering magnetic compensation, consequently expanding the materials base beyond artificial magnetic multilayers and broadening the range of potential applications of the phenomenon.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗