Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mixed phase”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Use of IR pyrometry to measure free-surface temperatures of partially melted tin as a function of shock pressure

Equilibrium equation of state theory predicts that the free-surface release temperature of shock-loaded tin will show a plateau at 505 K in the stress range from 19.5 to 33.0 GPa, corresponding to the solid-liquid, mixed-phase region of tin. In this paper we report free-surface temperature measurements on shock-loaded tin from 15 to 31 GPa using multiwavelength optical pyrometry. The shock waves were generated by direct contact of detonating high explosive with a tin sample, and the stress in the sample was determined by free-surface velocity measurements using photon Doppler velocimetry. We measured the emitted thermal radiance in the near IR region at four wavelengths from 1.5 to 5.0 mum. Above 25 GPa the measured free-surface temperatures were higher than the predicted 505 K, and they increased with increasing stress. This deviation may be explained by hot spots and/or variations in surface emissivity, and it may indicate a weakness in the use of a simple analysis of multiwavelength pyrometry data for conditions, such as above the melt threshold, where hot spots or emissivity variations may be significant. We are continuing to study the discrepancy to determine its cause.

36 MATERIALS SCIENCE↗

Ice Multiplication by Fragmentation during Quasi-Spherical Freezing of Raindrops: A Theoretical Investigation

Ice multiplication by fragmentation during collision–freezing of supercooled rain or drizzle is investigated. A zero-dimensional dynamical system describes the time evolution of number densities of supercooled drops and ice crystals in a mixed-phase cloud. The characteristic time scale for this collision–freezing ice fragmentation is controlled by the collision efficiency, the number of ice fragments per freezing event, and the available number concentration of supercooled drops. The rate of the process is proportional to the number of supercooled drops available. Thus, ice may multiply extensively, even when the fragmentation number per freezing event is relatively small. The ratio of total numbers of ice particles to those from the first ice, namely, the “ice-enhancement factor,” is controlled both by the number of fragments per freezing event and by the available number concentration of supercooled drops in a similar manner. Especially, when ice fragmentation by freezing of supercooled drops is considered in isolation, the number of originally existing supercooled drops multiplied by the fragmentation number per freezing event yields the eventual number of ice crystals. When supercooled drops are continuously generated by coalescence, ice crystals from freezing fragmentation also continuously increase asymptotically at a rate equal to the generation rate of supercooled drops multiplied by the fragmentation number per freezing event. All these results are expressed by simple analytical forms, thanks to the simplicity of the theoretical model. These parameters can practically be used as a means for characterizing observed mixed-phase clouds.

54 ENVIRONMENTAL SCIENCES↗

On Modeling Air/Space-Borne Radar Returns in the Melting Layer

The bright band is the enhanced radar echo associated with the melting of hydrometeors in stratiform rain where the melting process usually occurs below 0 C isotherm over a distance of about 500m. To simulate this radar signature, a scattering model of melting snow is proposed in which the fractional water content is prescribed as a function of the radius of a spherical mixed- phase particle consisting of air, ice and water. The model is based on the observation that melting starts at the surface of the particle and then gradually develops towards the center. To compute the scattering parameters of a non-uniform melting particle, the particle is modeled as a sphere represented by a collection of 64(exp 3) cubic cells of identical size where the probability of water at any cell is prescribed as a function of the radius. The internal field of the particle, used for deriving the effective dielectric constant, is computed by the Conjugate Gradient and Fast Fourier Transform (CGFFT) numerical methods. To make computations of the scattering parameters more efficient, a multi-layer stratified-sphere scattering model is introduced after demonstrating that the scattering parameters of the non-uniformly melting particle can be accurately reproduced by the stratified sphere. In conjunction with a melting layer model that describes the melting fractions and fall velocities of hydrometeors as a function of the distance from the 0 C isotherm, the stratified-sphere model is used to simulate the radar bright band profiles. These simulated profiles are shown to compare well with measurements from the Precipitation Radar (PR) aboard the Tropical Rainfall Measuring Mission (TRMM) satellite and a dual-wavelength airborne radar. The results suggest that the proposed model of a melting snow particle may be useful in studying the characteristics of the bright-band in particular and mixed- phase hydrometeors in general.

Liao, Liang↗

Sensitivity of CAM5-simulated Arctic clouds and radiation to ice nucleation parameterization

Sensitivity of Arctic clouds and radiation in the Community Atmospheric Model, version 5, to the ice nucleation process is examined by testing a new physically based ice nucleation scheme that links the variation of ice nuclei (IN) number concentration to aerosol properties. The default scheme parameterizes the IN concentration simply as a function of ice supersaturation. The new scheme leads to a significant reduction in simulated IN concentration at all latitudes while changes in cloud amounts and properties are mainly seen at high- and midlatitude storm tracks. In the Arctic, there is a considerable increase in midlevel clouds and a decrease in low-level clouds, which result from the complex interaction among the cloud macrophysics, microphysics, and large-scale environment. The smaller IN concentrations result in an increase in liquid water path and a decrease in ice water path caused by the slowdown of the Bergeron–Findeisen process in mixed-phase clouds. Overall, there is an increase in the optical depth of Arctic clouds, which leads to a stronger cloud radiative forcing (net cooling) at the top of the atmosphere. The comparison with satellite data shows that the new scheme slightly improves low-level cloud simulations over most of the Arctic but produces too many midlevel clouds. Considerable improvements are seen in the simulated low-level clouds and their properties when compared with Arctic ground-based measurements. As a result, issues with the observations and the model–observation comparison in the Arctic region are discussed.

54 ENVIRONMENTAL SCIENCES↗

Integration of the Total Lightning Jump Algorithm into Current Operational Warning Environment Conceptual Models

The presence and rates of total lightning are both correlated to and physically dependent upon storm updraft strength, mixed phase precipitation volume and the size of the charging zone. The updraft modulates the ingredients necessary for electrification within a thunderstorm, while the updraft also plays a critical role in the development of severe and hazardous weather. Therefore utilizing this relationship, the monitoring of lightning rates and jumps provides an additional piece of information on the evolution of a thunderstorm, more often than not, at higher temporal resolution than current operational radar systems. This correlation is the basis for the total lightning jump algorithm that has been developed in recent years. In order to become a viable option for operational forecasters to incorporate into their severe storm monitoring process, the total lightning jump must be placed into the framework of several severe storm conceptual models (e.g., radar evolution, storm morphology) which forecasters have built through training and experience. Thus, one of the goals of this study is to examine and relate the lightning jump concept to often used radar parameters (e.g., dBZ vertical structure, VIL, MESH, MESO/shear) in the warning environment. Tying lightning trends and lightning jump occurrences to these radar based parameters will provide forecasters with an additional tool that they can use to build an accurate realtime depiction as to what is going on in a given environment. Furthermore, relating the lightning jump concept to these parameters could also increase confidence in a warning decision they have already made, help tip the scales on whether or not to warn on a given storm, or to draw the forecaster s attention to a particular storm that is rapidly developing. Furthermore the lightning information will add vital storm scale information in regions that are not well covered by radar, or when radar failures occur. The physical basis for the lightning jump algorithm in relation to severe storm dynamics and microphysics is a key component that must be further explored. Many radar studies have examined flash rates and their relation to updraft strength, updraft volume, precipitation -sized ice mass, etc.; however, very few have related the concept of the lightning jump and manifestation of severe weather to storm dynamics and microphysics using multi -Doppler and polarimetric radar techniques. Therefore, the second half of this study will combine the lightning jump algorithm and these radar techniques in order to place the lightning jump concept into a physical and dynamical framework. This analysis includes examining such parameters as mixed phase precipitation volume, charging zone, updraft strength and updraft volume. Such a study should provide increased understanding of and confidence in the strengths and limitations of the lightning jump algorithm in the storm warning process.

Schultz, Christopher J.↗

Cloud feedback mechanisms and their representation in global climate models

Cloud feedback—the change in top-of-atmosphere radiative flux resulting from the cloud response to warming—constitutes by far the largest source of uncertainty in the climate response to CO 2 forcing simulated by global climate models (GCMs). In this paper, we review the main mechanisms for cloud feedbacks, and discuss their representation in climate models and the sources of intermodel spread. Global-mean cloud feedback in GCMs results from three main effects: (1) rising free-tropospheric clouds (a positive longwave effect); (2) decreasing tropical low cloud amount (a positive shortwave [SW] effect); (3) increasing high-latitude low cloud optical depth (a negative SW effect). These cloud responses simulated by GCMs are qualitatively supported by theory, high-resolution modeling, and observations. Rising high clouds are consistent with the fixed anvil temperature (FAT) hypothesis, whereby enhanced upper-tropospheric radiative cooling causes anvil cloud tops to remain at a nearly fixed temperature as the atmosphere warms. Tropical low cloud amount decreases are driven by a delicate balance between the effects of vertical turbulent fluxes, radiative cooling, large-scale subsidence, and lower-tropospheric stability on the boundary-layer moisture budget. High-latitude low cloud optical depth increases are dominated by phase changes in mixed-phase clouds. Finally, the causes of intermodel spread in cloud feedback are discussed, focusing particularly on the role of unresolved parameterized processes such as cloud microphysics, turbulence, and convection.

54 ENVIRONMENTAL SCIENCES↗

Genetic algorithm prediction of crystal structure of metastable Si-IX phase

We performed genetic algorithm search for the atomic structure of the long Lime unsolved Si-IX phase. We found two new structures with space groups of P4(2)/m and P-4, respectively, which have lattice parameters in excellent agreement with the experimental data. The phonon calculations showed that the P4(2)/m structure exhibits a soft phonon mode, while the P-4 structure is dynamically stable. Our calculation also showed that the P-4 structure is a meta-stable structure in a pressure range from 0 to 40 GPa, The Si-IX phase could be a mixed phase consisting of the P4(2)/m and the P-4 structures. Published by Elsevier Ltd.

36 MATERIALS SCIENCE↗

Crystal and Electronic Structure of FeSe at High Pressure and Low Temperature

We have investigated the high-pressure crystal and electronic structures of superconducting FeSe by high-resolution synchrotron powder X-ray diffraction and density functional theory (DFT) calculations at ambient and at low temperatures down to 8 K. Ambient nuclear resonant inelastic X-ray scattering (NRIXS) experiments were performed on FeSe to understand the partial phonon density of states (PDOS) of the high-pressure phases. On the basis of our experimental results and DFT calculations, we demonstrate a pressure-induced distortion of the low-temperature Cmma phase at around 1.6 GPa and the appearance of a high-pressure Pbnm phase. Upon increasing the pressure above 9 GPa, the orthorhombic phase becomes the major phase, and a mixed-phase region exists up to 26 GPa. The pressure-induced structural changes in this system and its connection to T{sub c} enhancement are discussed.

43 PARTICLE ACCELERATORS↗

Insulator–metal transition in CrSiTe 3 triggered by structural distortion under pressure

van der Waals solids are well known to host remarkable phase diagrams with competing phases, unusual energy transfer processes, and elusive states of matter. Among this class of materials, chalcogenides have emerged as the most flexible and relevant platforms for unraveling charge–structure–function relationships. In order to explore the properties of complex chalcogenides under external stimuli, we measured the far infrared spectroscopic response of CrSiTe 3 under extreme pressure–temperature conditions. Analysis of the 368 cm –1 Si–Te stretching mode and the manner in which it is screened by the closure of the indirect gap reveals that the insulator–metal transition takes place immediately after the structural phase transition—once the mixed phase aspect of the lattice distortion is resolved. At the same time, the two-phase region associated with the structural transition widens with decreasing temperature, and the slope of the insulator–metal transition under pressure is consistent with increasing entropy. These trends completely revise the character of the temperature–pressure phase diagram as well as the relationship between the structural and insulator–metal transitions, leading to a critical nexus of activity that may hide a quantum critical point and allow superconductivity to emerge.

36 MATERIALS SCIENCE↗

Functional properties of BaTiO{sub 3}-Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} magnetoelectric ceramics prepared from powders with core-shell structure

In the present work, diphasic ceramic composites with core-shell nanostructures formed by Ni{sub 0.50}Zn{sub 0.50}Fe{sub 2}O{sub 4} core and BaTiO{sub 3} shell were investigated. Their properties were compared with those of composites prepared by coprecipitation. The core-shell structure was confirmed by microstructural powder analysis. Homogeneous microstructures with a good phase mixing and percolated dielectric phase by the magnetic one were obtained from coprecipitated powders. Less homogeneous microstructures resulted in ceramics produced from the powder prepared by core-shell method, with isolated small ferrite grains besides large ferrite aggregates embedded into the BaTiO{sub 3} matrix. Both the ferroelectric and magnetic phases preserve their basic properties in bulk composite form. However, important differences in the dielectric relaxation and conduction mechanisms were found as result of the microstructural difference. Extrinsic contributions play important roles in modifying the electric properties in both ceramics, causing space charge effect, Maxwell-Wagner relaxations and hopping conductivity, mainly due to the ferrite low resistivity phase. The conductivity and dielectric modulus spectra analysis allowed to identify different polaron contributions associated with the microstructural differences. It results that by using the core-shell method, improved dielectric properties and limited hopping contributions can be realized.

36 MATERIALS SCIENCE↗

Photoluminescence Polarization Anisotropy in a Single Heterostructured III-V Nanowire with Mixed Crystal Phases

Low temperature (10 K) micro-photoluminescence ({mu}-PL) of single GaAs/AlGaAs core-shell nanowires with single GaAsSb inserts were measured. The PL emission from the zinc blende GaAsSb insert is strongly polarized along the nanowire axis while the PL emission from the wurtzite GaAs nanowire is perpendiculary polarized to the nanowire axis. The result indicates that the crystal phase, through the optical selection rules, has significant effect on the polarization of the PL from NWs besides the dielectric mismatch. The analysis of the PL results based on the electronic structure of these nanowires supports the correlation between the crystal phase and the PL emission.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mixed magnetic phases in Co{sub 3}O{sub 4} nanoparticles synthesized by co-precipitation method

In the present manuscript, Co{sub 3}O{sub 4} nanoparticles have been synthesized with the help of co-precipitation method and studied the structural, optical and magnetic properties. X ray diffraction analysis of the synthesized samples reveals the formation of single phase cubic spinel structure with the space group Fd-3m. FESEM and TEM results indicate the formation of nano-sized particles. The optical measurement reveals the two band gaps ∼2.77 and 1.67 eV in the sample. Magnetic measurement shows weak ferromagnetic interaction in Co{sub 3}O{sub 4} along with usual paramagnetic nature at room temperature. However, at low temperatures the sample shows antiferromagnetic interaction. The correlation between the structural and observed magnetic and optical properties of Co{sub 3}O{sub 4} nanoparticles will be described and discussed in this paper.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Sn 2 Se 3 : A conducting crystalline mixed valent phase change memory compound

Thin film Sn 2 Se 3 is a promising new phase change memory material with a very high resistance contrast between insulating amorphous and conducting crystalline phases. In this paper, we identify the structure of the Sn 2 Se 3 crystalline phase using ab initio evolutionary structure search and report its properties. We find a structure based on Sn-Se ribbons with clear disproportionation of Sn into Sn(II) and Sn(IV) sites, similar to Sn 2 S 3 . The energy is only 9 meV/atom above the tie line between SnSe and SnSe 2 . Sn charge disproportionation is only marginally favored in this selenide, in contrast to sulfides. This leads to a semimetallic rather than semiconducting behavior. Finally, these findings, marginal stability of the crystalline phase and conducting character and close competition of disproportionated and non-disproportionated structures, are important for understanding the behavior of Sn 2 Se 3 as a phase change memory material, specifically the fast low energy, the low temperature switching, and the high resistance contrast.

36 MATERIALS SCIENCE↗

I n s i t u observation of a phase transition in silicon carbide under shock compression using pulsed x-ray diffraction

The behavior of silicon carbide (SiC) under shock compression is of interest due to its applications as a high-strength ceramic and for general understanding of shock-induced polymorphism. Here we use the Matter in Extreme Conditions beamline of the Linac Coherent Light Source to carry out a series of time-resolved pump-probe x-ray diffraction measurements on SiC laser-shocked to as high as 206 GPa. Experiments on single crystals and polycrystals of different polytypes show a transformation from a low-pressure tetrahedral phase to the high-pressure rocksalt-type (B1) structure. We directly observe coexistence of the low- and high-pressure phases in a mixed-phase region and complete transformation to the B1 phase above 200 GPa. The densities measured by x-ray diffraction are in agreement with both continuum gas-gun studies and a theoretical B1 Hugoniot derived from static-compression data. Time-resolved measurements during shock loading and release reveal a large hysteresis upon unloading, with the B1 phase retained to as low as 5 GPa. The sample eventually reverts to a mixture of polytypes of the low-pressure phase at late times. Our study demonstrates that x-ray diffraction is an effective means to characterize the time-dependent structural response of materials undergoing shock-induced phase transformations at megabar pressures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic properties of dense holographic QCD

We investigate the Sakai-Sugimoto model at nonzero baryon chemical potential in a background magnetic field both in the confined phase and in the deconfined phase with restored chiral symmetry. In this case the 8-brane Chern-Simons term becomes important. In the confined phase it generates a gradient of the pseudoscalar 'pion', which carries a nonvanishing baryon charge. Above a critical value of the chemical potential there is a second-order phase transition to a mixed phase which includes also ordinary baryonic matter. However, at fixed baryon charge density the matter is purely pion-gradient above a critical magnetic field. In the deconfined chiral-symmetric phase at nonzero chemical potential the magnetic field induces an axial current. We also compute the magnetization of the baryonic matter and find that it is paramagnetic in all three phases but with nonlinear behavior at a large magnetic field.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗