Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mixed conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Urban Air Mobility Conflict Resolution: Centralized or Decentralized?

This work begins to address one of the critical questions in the urban air mobility and small unmanned aircraft communities: Should the en-route conflict resolution function in an urban air mobility traffic system be centralized or decentralized? Three conflict resolution architectures are modeled and analyzed: centralized, decentralized with uniform rules, and decentralized with mixed rules. This study compares these architectures and investigates their robustness to communication and state information errors in terms of safety and efficiency metrics. Experiments are conducted using a high-fidelity Monte Carlo traffic simulator and a generic set of traffic scenarios with increasing traffic density. When no errors were modeled, the centralized architecture marginally outperformed the decentralized architecture. However, performance of the centralized architecture was found to be adversely affected by the modeled input errors to a greater degree than was the decentralized architecture. Performance of the centralized architecture also was degraded significantly by the modeled transmission errors of the centralized resolution maneuvers. In the decentralized architecture, uniform rules outperformed mixed rules because, in the mixed rules case, system safety performance was undermined and dominated by the poor performers.

Urban Air Mobility (UAM) traffic system↗

Afterburner performance of film-vaporizing V-gutters for inlet temperatures up to 1255 K

Combustion tests of five variations of an integral, spray-bar - flameholder combination were conducted in a 0.49-m-diameter duct. Emphasis was on low levels of augmentation. Fuel impinged on guide plates, mixed with a controlled amount of inlet air, vaporized, and was guided into the V-gutter wake. Combustor length was 0.92 m. Good performance was demonstrated at fuel-air ratios less than 0.025 for inlet temperatures of 920 to 1255 K. Maximum combustion efficiency occured in the vicinity of fuel-air ratios of 0.02 and was 92 to 100 percent, depending on the inlet temperature. Lean blowout fuel-air ratios were in the vicinity of 0.005. Improvements in rich-limit blowout resulted from enlarging the guide-flow passageway areas. Other means of extending the operating range are suggested. A simplified afterburner concept for application to advanced engines is described.

Branstetter, J. R.↗

Altitude engine test of a turbofan exhaust gas mixer to conserve fuel

A comparison of the specific fuel consumption was made with and without an internal mixer installed in a low bypass ratio, confluent flow turbofan engine. Tests were conducted at several Mach numbers and altitudes for core to fan stream total temperature ratios of 2.0 and 2.5 and mixing lengths of L/D = 0.95 and 1.74. For these test conditions, the specific fuel consumption improvement varied from 2.5 to 4.0 percent.

Cullom, R. R.↗

A numerical investigation of hydrogen combustion in Mach 2 flow

A numerical study is conducted of a reacting flowfield generated by a single hydrogen jet injected transversely behind a rearward facing step. A nonreacting mixing study was followed by a reacting simulation. The computation simulates a current experimental condition. The validation of the numerical solution was limited to a comparison of the wall-pressure distribution along the wall. The comparison indicates agreement between the experiment and the prediction with a maximum error of 7 percent. The addition of the reaction responsible for HO2 production (H + O2 + M = HO2 + M) to an initially simplified chemical mechanism reduced the exponential growth of the free radicals and reduced the amount of heat released by combustion; as a result, the flowfield was significantly changed. A reversed flow was obtained in limited regions of the flow.

Segal, Corin↗

Supersonic Inlet with Pylons Set and Star-Shaped Forebody for Mixing, Combustion and Thrust Enhancement

Two new approaches are discussed in this paper for application in the Scramjet inlet of an air-breathing propulsion system: 1) In the first approach, the pylon set is installed in the rectangular inlet near the cowl front edge. For a quasi-axisymmetric inlet, a similar set is installed along the Star-shaped forebody axis. This set contains 3 - 4 airfoil-shaped strips or cross-sectional rings depending on the type of inlet. The inlets: rectangular, axisymmetric or star-shaped, are located at different distances from the forebody. Fuel injection takes place through these pylons, which provides for uniform mixing downstream. The locations, sizes and angles of these pylons are very important for efficient application. Optimal values of geometrical parameters were determined from multi-parametric NSE-based numerical simulations of the laminar and turbulent external/internal flows. These simulations have shown significant benefits for mixing, combustion and thrust of the proposed approach by comparison with traditional well-known designs. Experimental tests will be conducted soon at the NASA LaRC and Institute of Mechanics at Moscow State University. Preliminary estimates are very promising.

Gilinsky, M.↗

Turbulent mixing of multiple co-axial gaseous fuel jets in a supersonic airstream

An experimental and analytical investigation of a strut-mounted, four-nozzle, downstream-facing, gaseous fuel-injector assembly was conducted in a Mach 4 airstream at 154 psia and 520 R. Helium was used as the injectant in order to simulate a low molecular weight fuel, and the interjet spacing (S/D) was the main parameter varied. The principal data are in the form of helium concentration profiles at seven axial stations, Mach number distributions at three axial stations, and Schlieren photographs of the flow field at different interjet spacings. An approximate analysis was developed based upon a linearization in the Von Mises plane, Crocco integrals for the temperature and concentrations fields, and an eddy viscosity model. Good agreement with the data was achieved. It was found that, at these conditions, interjet spacing has a significant effect on mixing only up to S/D of approximately 2.5, with the concentration of the injectant at a given point becoming smaller as S/D is increased.

Lorber, A. K.↗

A mixed pseudospectral/finite difference method for a thermally driven fluid in a nonuniform gravitational field

A numerical study of the steady, axisymmetric flow in a heated, rotating spherical shell is conducted to model the Atmospheric General Circulation Experiment (AGCE) proposed to run aboard a later shuttle mission. The AGCE will consist of concentric rotating spheres confining a dielectric fluid. By imposing a dielectric field across the fluid a radial body force will be created. The numerical solution technique is based on the incompressible Navier-Stokes equations. In the method a pseudospectral technique is based on the incompressible Navier-Stokes equations. In the method a pseudospectral technique is used in the latitudinal direction, and a second-order accurate finite difference scheme discretizes time and radial derivatives. This paper discusses the development and performance of this numerical scheme for the AGCE which has been modelled in the past only by pure FD formulations. In addition, previous models have not investigated the effect of using a dielectric force to simulate terrestrial gravity. The effect of this dielectric force on the flow field is investigated as well as a parameter study of varying rotation rates and boundary temperatures. Among the effects noted are the production of larger velocities and enhanced reversals of radial temperature gradients for a body force generated by the electric field.

Macaraeg, M. G.↗

A mixed pseudospectral/finite difference method for a thermally driven fluid in a nonuniform gravitational field

A numerical study of the steady, axisymmetric flow in a heated, rotating spherical shell is conducted to model the Atmospheric General Circulation Experiment (AGCE) proposed to run aboard a later Shuttle mission. The AGCE will consist of concentric rotating spheres confining a dielectric fluid. By imposing a dielectric field across the fluid a radial body force will be created. The numerical solution technique is based on the incompressible Navier-Stokes equations. In the method a pseudospectral technique is used in the latitudinal direction, and a second-order accurate finite difference scheme discretizes time and radial derivatives. This paper discusses the development and performance of this numerical scheme for the AGCE which has been modeled in the past only by pure FD formulations. In addition, previous models have not investigated the effect of using a dielectric force to simulate terrestrial gravity. The effect of this dielectric force on the flow field is investigated as well as a parameter study of varying rotation rates and boundary temperatures. Among the effects noted are the production of larger velocities and enhanced reversals of radial temperature gradients for a body force generated by the electric field.

Macaraeg, M. G.↗

MAPGEN : mixed initiative planning and scheduling for the Mars '03 MER mission

The Mars Exploration Rovers Mars '03 mission is one of NASA's most ambitious science missions to date. The rovers will be launched in the summer of 2003 with each rover carrying instruments to conduct remote and in-situ observation to elucidate the planet's past climate, water activity, and habitability. Science is the primary driver of MER and, as a consequence, making best use of the scientific instruments, within the available resources, is a crucial aspect of the mission. To address this critically, the MER project has selected MAPGEN (Mixed-Initiative Activity Plan GENerator) as an activity planning tool. MAPGEN combines two exiting systems, each with a strong heritage: APGEN the Activity Planning tool from the Jet Propulsion Laboratory and the Europs Planning/Scheduling system from NASA Ames Research Center. This paper discusses the issues arising from combining these tools in the context of this mission.

planning and scheduling↗

The Impact of New Estimates of Mixing Ratio and Flux-based Halogen Scenarios on Ozone Evolution

The evolution of ozone in the 21st century has been shown to be mainly impacted by the halogen emissions scenario and predicted changes in the circulation of the stratosphere. New estimates of mixing ratio and flux-based emission scenarios have been produced from the SPARC Lifetime Assessment 2013. Simulations using the Goddard Earth Observing System Chemistry-Climate Model (GEOSCCM) are conducted using this new A1 2014 halogen scenario and compared to ones using the A1 2010 scenario. This updated version of GEOSCCM includes a realistic representation of the Quasi-Biennial Oscillation and improvements related to the break up of the Antarctic polar vortex. We will present results of the ozone evolution over the recent past and 21st century to the A1 2010, A1 2014 mixing ratio, and an A1 2014 flux-based halogen scenario. Implications of the uncertainties in these estimates as well as those from possible circulation changes will be discussed.

Chemistry-Climate Models↗

Isolating the Surface Type Influence on Arctic Cloud Properties

In response to anthropogenic climate change, substantial declines in sea ice have been observed. An urgent question is whether and how clouds respond to the changing Arctic surface. Due to the important radiative influence of clouds, the response of clouds to sea ice cover change constitutes a potentially important climate feedback within the Arctic. The sign of this feedback is strongly influenced by the seasonality of the cloud response to sea ice loss. Given the importance of this phenomenon, previous research focused on using observations of inter-annual variability to quantify the cloud-sea ice relationship. However, the reliance on inter-annual variability to assess the covariance between clouds and sea ice make it challenging to control for the influence of large-scale meteorology on the clouds. We have devised an approach that applies an in situ, airborne observational strategy to quantify the influence of surface type on Arctic clouds to satellite data. Our event-based method composites cloud property differences for ocean, marginal ice zone, and sea ice surface types for >5000 MIZ crossing events. We find that cloud properties in non-summer months below ~1.5 km are influenced by surface type such that greater cloud fraction and water content are found over ocean relative to sea ice regions. Results are statistically significantly at the 95% confidence level. During summer, the surface type does not influence the cloud properties. The primary cause of the surface type dependent cloud property differences is the thermodynamic profiles differences that occur between the two surface types: namely, ocean footprints are warmer, moister, have more positive surface turbulent fluxes and are less stable than their sea ice counterparts. We find that the differences in thermodynamic profiles by surface type that correspond to the cloud property differences also explains a significant portion of the variability across events. Our analysis provides evidence that the influence of surface type on cloud properties fundamentally occurs due to the inherent surface temperature differences between the surface types. Significant surface type influences on cloud properties are only found in the presence of surface temperature differences between the surface types and only non-summer months meet this criterion. A conceptual model of this process is as follows, fundamental properties of the ocean and sea ice surface types (e.g., surface albedo, heat capacity/thermal inertia, surface roughness, and thermal conductance) lead to systematic differences in the surface temperature by surface type. In response to this surface temperature difference, atmosphere boundary layer processes (including turbulent mixing and radiation) communicate the surface temperature differences to the lower atmosphere driving the greater stability over sea ice than ocean. These differences in the background thermodynamic state profiles between the surface types yield atmospheric conditions that are more conducive to cloud development over ocean than sea ice. The details of these boundary layer processes are sensitive to the surface type but may not be fundamental to the resulting thermodynamic structure and cloud differences. Thus, our results indicate that to accurately model that cloud response to sea ice loss in climate models the surface type properties that yield the systematic differences in ocean and sea ice temperature (e.g., surface albedo, surface turbulent fluxes parameters, and thermal conductance) must be accurately represented.

Arctic radiation budget↗

Thrust Enhancement in Hypervelocity Nozzles by Chemical Catalysis

In the hypersonic flight regime, the air-breathing supersonic combustion ramjet (scramjet) has been shown to be a viable propulsion system. The current designs of scramjet engines provide performance benefits only up to a Mach number of 14. Performance losses increase rapidly as the Mach number increases. To extend the applicability of scram'jets beyond Mach 14, research is being conducted in the area of inlet and wave drag reduction, skin-friction and heat-transfer reduction, nozzle loss minimization, low-loss mixing, and combustion enhancement. For high Mach number applications, hydrogen is the obvious fuel choice because of its high energy content per unit mass in comparison with conventional fuels. These flight conditions require engines to operate at supersonic internal velocities, high combustor temperatures, and low static pressures. The high static temperature condition enhances the production of radicals such as H and OH, and the low-pressure condition slows the reaction rates, particularly the recombination reactions. High-temperature and low-pressure constraints, in combination with a small residence time, result in a radical-rich exhaust gas mixture exiting the combustor. At high Mach number conditions (due to low residence time), H and OH do not have enough time to recombine ; thus, a significant amount of energy is lost as these high-energy free radical are exhausted. The objective of the present study is to conduct a flowfield analysis for a typical nozzle geometry for NASP-type vehicle to assess for thrust enhancement in hypervelocity nozzles by substituting small amount of phosphine for hydrogen.

Singh, D. J.↗

PMR polyimide/graphite fiber composite fan blades

Ultrahigh speed fan blades, designed in accordance with the requirements of an ultrahigh tip speed blade axial flow compressor, were fabricated from a high strength graphite fiber tow and a PMR polyimide resin. The PMR matrix was prepared by combining three monomeric reactants in methyl alcohol, and the solution was applied directly to the reinforcing fiber for subsequent in situ polymerization. Some of the molded blades were completely finished by secondary bonding of root pressure pads and an electroformed nickel leading edge sheath prior to final machining. The results of the spin testing of nine PMR fan blades are given. Prior to blade fabrication, heat resin tensile properties of the PMR resin were examined at four formulated molecular weight levels. Additionally, three formulated molecular weight levels were investigated in composite form with both a high modulus and a high strength fiber, both as-molded and postcured, in room temperature and 232 C transverse tensile, flexure and short beam shear. Mixed fiber orientation panels simulating potential blade constructions were also evaluated. Flexure tests, short beam shear tests, and tensile tests were conducted on these angle-plied laminates.

Cavano, P. J.↗

Energy Efficient Engine Preliminary Design and Integration Studies

The technology and configurational requirements of an all new 1990's energy efficient turbofan engine having a twin spool arrangement with a directly coupled fan and low-pressure turbine, a mixed exhaust nacelle, and a high 38.6:1 overall pressure ratio were studied. Major advanced technology design features required to provide the overall benefits were a high pressure ratio compression system, a thermally actuated advanced clearance control system, lightweight shroudless fan blades, a low maintenance cost one-stage high pressure turbine, a short efficient mixer and structurally integrated engine and nacelle. A conceptual design analysis was followed by integration and performance analyses of geared and direct-drive fan engines with separate or mixed exhaust nacelles to refine previously designed engine cycles. Preliminary design and more detailed engine-aircraft integration analysis were then conducted on the more promising configurations. Engine and aircraft sizing, fuel burned, and airframe noise studies on projected 1990's domestic and international aircraft produced sufficient definition of configurational and advanced technology requirements to allow immediate initiation of component technology development.

Gray, D. E.↗

Some effects of cruise speed and engine matching of supersonic inlet design

An analytical study was conducted to determine the impact of flight Mach number on inlet type selection for a supersonic cruise aircraft. External and mixed-compression axisymmetric and two-dimensional inlets were considered. The internal contraction of the mixed-compression inlets was limited to achieve self-starting. At Mach 2.0, the axisymmetric mixed-compression inlet provided the best aircraft range. At Mach 2.3, the two-dimensional mixed-compression inlet was the most attractive if enough variable geometry were incorporated to minimize spillage during subsonic cruise. Increases in takeoff-to-cruise air flow ratio gave lower aircraft range.

Bangert, L. H.↗

A parametric study of staged fuel injector configurations for scramjet applications

A parametric study of staged (multiple) perpendicular fuel injector configurations has been conducted using a computer code which solves the two-dimensional elliptic Navier-Stokes equations. The program computes the turbulent mixing and reaction of hydrogen fuel and air and allows the study of separated regions of the flow immediately preceding and following the injectors. The validity of the code is demonstrated in a cold flow helium injection study with a single injector. Results are presented that describe the flow field near opposing staged injectors over a range of parameters. Parameters that are varied include injector size, fuel split, and distance between injectors. Comparisons of the configurations are made to assess their mixing and potential flame-holding qualities.

Weidner, E. H.↗

Effects of salinity on the microwave emission of soils

Controlled plot experiments were conducted to collect L and C band passive microwave data concurrent with ground observations of salinity and soil moisture. Two dielectric mixing models were used with an emission model to predict the emissivity from a bare smooth uniform profile. The models produce nearly identical results when near zero salinity is involved and reproduce the observed data at L band extremely well. Discrepancies at C band are attributed to sampling depth problems. Comparisons of predicted emissivities at various salinities with observed values indicate that the dynamic range of the emissivities can be explained using either of the dielectric mixing models. Evaluation of the entire data set, which included four salinity levels, indicates that for general application the effects of soil salinity can be ignored in interpreting microwave data for estimating soil moisture under most agricultural conditions.

Jackson, T. J.↗

Internal computational fluid mechanics on supercomputers for aerospace propulsion systems

The accurate calculation of three-dimensional internal flowfields for application towards aerospace propulsion systems requires computational resources available only on supercomputers. A survey is presented of three-dimensional calculations of hypersonic, transonic, and subsonic internal flowfields conducted at the Lewis Research Center. A steady state Parabolized Navier-Stokes (PNS) solution of flow in a Mach 5.0, mixed compression inlet, a Navier-Stokes solution of flow in the vicinity of a terminal shock, and a PNS solution of flow in a diffusing S-bend with vortex generators are presented and discussed. All of these calculations were performed on either the NAS Cray-2 or the Lewis Research Center Cray XMP.

Andersen, Bernhard H.↗