Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “minimum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

On the minimum electron transport coefficients in tokamaks in the range of low collision frequencies

There are two close empirical scalings, namely, the T-11 and neo-Alcator ones, that provide correct estimates for the energy confinement time in tokamaks in ohmic heating regimes in the linear part of the dependence {tau}{sub E}(n-bar{sub e}) in the range of low values of n-bar{sub e} and <{nu}{sub e}{sup *}> {<=} 1. The similar character of electron energy confinement in this range, which expands with increasing magnetic field B{sub 0}, has stimulated the search for dimensionless parameters and simple physical models that would explain the experimentally observed dependences {chi}{sub e} {approx} 1/n{sub e} and {tau}{sub Ee} {approx} n-bar{sub e}. In 1987, T. Okhawa showed that the experimental data were satisfactorily described by the formula {chi}{sub eperpendicular} = (c{sup 2}/{omega}{sub pe}{sup 2}){nu}{sub e}/qR, in deriving of which the random spatial leap along the radius r on the electron trajectory was assumed to be the same as that in the coefficient of the poloidal field diffusion, while the repetition rate of these leaps was assumed to be {nu}{sub e}/qR. In 2004, J. Callen took into account the decrease in the fraction of transient electrons with increasing toroidal ratio {epsilon} = r/R and corrected the coefficient c{sup 2}/{omega}{sub pe}{sup 2} in Okhawa equation by the factor {sigma}{sub ||} {sup Sp}/{sigma}{sub ||}{sup neo}. If one takes into account this correction and assumes that the frequency of the stochastic process is equal to the reciprocal of the half-period of rotation of a trapped electron along its banana trajectory, then the resulting expression for {chi}{sub eperpendicular} will coincide with the T-11 scaling: {chi}{sub e}{sup an} {infinity} {epsilon}{sup 1.75}(T{sub e}/A{sub i}){sup 0.5}/(n{sub e}qR) at Ai = 1. If the same stochastic process also involves ions, it may result in the opening of the orbit of a trapped ion at the distance {approx}(c/{omega}{sub pe})(m{sub i}/m{sub e}){sup 1/4}. In this case, the calculated coefficient of electron and ion diffusion D is close to D{sup an} {approx} {chi}{sub e}{sup an}/2.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tungsten Cluster Migration on Nanoparticles: Minimum Energy Pathway and Migration Mechanism

Transition state searches have been employed to investigate the migration mechanisms of W clusters on W nanoparticles, and to determine the corresponding migration energies for the possible migration paths of these clusters. The tungsten clusters containing up to four adatoms are found to prefer 2D-compact structures with relatively low binding energies. The effect of interface and vertex regions on the migration behavior of the clusters is significantly strong, as compared to that of nanoparticle size. The migration mechanisms are quite different when the clusters are located at the center of the nanoparticle and near the interface or vertex areas. Near the interfaces and vertex areas, the substrate atoms tend to participate in the migration processes of the clusters, and can join the adatoms to form a larger cluster or lead to the dissociation of a cluster via the exchange mechanism, which results in the adatom crossing the facets. The lowest energy paths are used to be determined the energy barriers for W cluster migrations (from 1- to 4-atoms) on the facets, edges and vertex regions. The calculated energy barriers for the trimers suggest that the concerted migration is more probable than the successive jumping of a single adatom in the clusters. In addition, it of interest to note that the dimer shearing is a dominant migration mechanism for the tetramer, but needs to overcome a relatively higher migration energy than other clusters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement of charged particle spectra in minimum-bias events from proton–proton collisions at $\sqrt{s}=13\,\text {TeV} $

Pseudorapidity, transverse momentum, and multiplicity distributions are measured in the pseudorapidity range $|\eta | < 2.4$ for charged particles with transverse momenta satisfying $p_{\mathrm {T}} > 0.5\,\text {GeV} $ in proton–proton collisions at a center-of-mass energy of $\sqrt{s} = 13\,\text {TeV} $ . Measurements are presented in three different event categories. The most inclusive of the categories corresponds to an inelastic $\mathrm {p}$ $\mathrm {p}$ data set, while the other two categories are exclusive subsets of the inelastic sample that are either enhanced or depleted in single diffractive dissociation events. As a result, the measurements are compared to predictions from Monte Carlo event generators used to describe high-energy hadronic interactions in collider and cosmic-ray physics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Prediction of SOFC Performance with or without Experiments: A Study on Minimum Requirements for Experimental Data

In the present paper, a physics-based procedure combining experiments and multi-physics numerical simulations is developed for overall analysis of SOFCs operational diagnostics and performance predictions. In this procedure, essential information for the fuel cell is extracted first by utilizing empirical polarization analysis in conjunction with experiments and refined by multi-physics numerical simulations via simultaneous analysis and calibration of polarization curve and impedance behavior. The performance at different utilization cases and operating currents is also predicted to confirm the accuracy of the proposed model. It is demonstrated that, with the present electrochemical model, three air/fuel flow conditions are needed to produce a set of complete data for better understanding of the processes occurring within SOFCs. After calibration against button cell experiments, the methodology can be used to assess performance of planar cell without further calibration. The proposed methodology would accelerate the calibration process and improve the efficiency of design and diagnostics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Using the Charge-Discharge Cycling of Positive Electrode Symmetric Cells to Find Electrolyte/Electrode Combinations with Minimum Reactivity

The effects of solvents, salts, electrolyte additives and surface coatings on LiNi 0.4 Mn 0.4 Co 0.2 O 2 (NMC442) or LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) have been probed using positive electrode Li-ion symmetric cells coupled with dV/dQ analysis. A robust symmetric cell design is presented which prevents hardware corrosion for over at least 800 hours of testing to 4.5 V vs. Li/Li + at 40°C. Positive electrode symmetric cells using uncoated positive electrode materials and 1M LiPF 6 EC:EMC 3:7 or 1M LiPF 6 EMC electrolyte rapidly developed high impedance and showed poor capacity retention. However, if 1% pyridine boron trifluoride (PBF) was added to these electrolytes, cell performance was dramatically improved. Replacing LiPF 6 by LiBF 4 in the electrolytes above, with or without PBF, yielded positive electrode symmetric cells with good capacity retention. Two types of surface coatings were explored on NMC622 positive electrodes. Cells using surface-coated positive electrodes demonstrated better capacity retention for all electrolytes compared to cells without surface coatings. Finally, this work can be used as a guide by those attempting to find electrolyte/electrode pairs suitable for use in NMC/graphite cells that can operate with long lifetime to 4.5 V.

25 ENERGY STORAGE↗

Optimal shielding design for minimum materials cost or mass

The mathematical underpinnings of cost optimal radiation shielding designs based on an extension of optimal control theory are presented, a heuristic algorithm to iteratively solve the resulting optimal design equations is suggested, and computational results for a simple test case are discussed. A typical radiation shielding design problem can have infinitely many solutions, all satisfying the problem's specified set of radiation attenuation requirements. Each such design has its own total materials cost. For a design to be optimal, no admissible change in its deployment of shielding materials can result in a lower cost. This applies in particular to very small changes, which can be restated using the calculus of variations as the Euler-Lagrange equations. Furthermore, the associated Hamiltonian function and application of Pontryagin's theorem lead to conditions for a shield to be optimal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Convolutional Neural Networks for Problems in Transport Phenomena: A Theoretical Minimum

Convolutional neural network (CNN), a deep learning algorithm, has gained popularity in technological applications that rely on interpreting images (typically, an image is a 2D field of pixels). Transport phenomena is the science of studying different fields representing mass, momentum, or heat transfer. Some of the common fields are species concentration, fluid velocity, pressure, and temperature. Each of these fields can be expressed as an image(s). Consequently, CNNs can be leveraged to solve specific scientific problems in transport phenomena. Herein, we show that such problems can be grouped into three basic categories: (a) mapping a field to a descriptor (b) mapping a field to another field, and (c) mapping a descriptor to a field. After reviewing the representative transport phenomena literature for each of these categories, we illustrate the necessary steps for constructing appropriate CNN solutions using sessile liquid drops as an exemplar problem. If sufficient training data is available, CNNs can considerably speed up the solution of the corresponding problems. Finally, the present discussion is meant to be minimalistic such that readers can easily identify the transport phenomena problems where CNNs can be useful as well as construct and/or assess such solutions.

97 MATHEMATICS AND COMPUTING↗

Summary and Analysis of Responses to Surveys on Experience with GHP Installations in Federal Facilities and Minimum Qualifications of GHP-related Professionals

To increase customer confidence in geothermal heat pump (GHP) technology, reduce the potential of improperly installed GHP systems, and ensure the quality and performance of GHP installations, the Geothermal Heat Pump Consortium (GHPC, now known as the Geothermal Exchange Organization or GEO) is leading an effort to develop the first national certification standard for all primary personnel involved in the implementation of GHP systems. This standard will be developed through a collaborative methodology that solicits information and input from consumers, industry stakeholders, and professional and trade organizations to identify the required qualifications of all the primary personnel and incorporate this information into the standard.

GSHP National Survey↗