Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “microwave radiometers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Performance Analysis of a Hardware Implemented Complex Signal Kurtosis Radio-Frequency Interference Detector

Radio-frequency interference (RFI) is a known problem for passive remote sensing as evidenced in the L-band radiometers SMOS, Aquarius and more recently, SMAP. Various algorithms have been developed and implemented on SMAP to improve science measurements. This was achieved by the use of a digital microwave radiometer. RFI mitigation becomes more challenging for microwave radiometers operating at higher frequencies in shared allocations. At higher frequencies larger bandwidths are also desirable for lower measurement noise further adding to processing challenges. This work focuses on finding improved RFI mitigation techniques that will be effective at additional frequencies and at higher bandwidths. To aid the development and testing of applicable detection and mitigation techniques, a wide-band RFI algorithm testing environment has been developed using the Reconfigurable Open Architecture Computing Hardware System (ROACH) built by the Collaboration for Astronomy Signal Processing and Electronics Research (CASPER) Group. The testing environment also consists of various test equipment used to reproduce typical signals that a radiometer may see including those with and without RFI. The testing environment permits quick evaluations of RFI mitigation algorithms as well as show that they are implementable in hardware. The algorithm implemented is a complex signal kurtosis detector which was modeled and simulated. The complex signal kurtosis detector showed improved performance over the real kurtosis detector under certain conditions. The real kurtosis is implemented on SMAP at 24 MHz bandwidth. The complex signal kurtosis algorithm was then implemented in hardware at 200 MHz bandwidth using the ROACH. In this work, performance of the complex signal kurtosis and the real signal kurtosis are compared. Performance evaluations and comparisons in both simulation as well as experimental hardware implementations were done with the use of receiver operating characteristic (ROC) curves. The complex kurtosis algorithm has the potential to reduce data rate due to onboard processing in addition to improving RFI detection performance.

microwaves↗
NASA NTRS2006

The Global Precipitation Measurement (GPM) Mission: An Overview

The Global Precipitation Measurement (GPM) Mission is an international satellite mission that uses advanced precipitation radar with a constellation of passive microwave radiometers to improve the accuracy, sampling, and coverage of global precipitation measurements. It is a science mission with integrated applications goals focusing on (1) advancing the knowledge of the global watedenergy cycle variability and freshwater availability and (2) improving weather, climate, and hydrological prediction capabilities through more accurate and frequent measurements of global precipitation. The GPM Mission is currently a partnership between NASA and the Japanese Aerospace Exploration Agency (JAXA), with opportunities for additional domestic and international partners in satellite constellation buildup and ground validation activities. The GPM Core satellite, which carries a JAXA-provided dual-frequency precipitation radar and a NASAprovided microwave radiometers with high-frequency capabilities for light rain and frozen precipitation measurements, is expected to be launched in the 2010 timeframe. The GPM Core will serve as a precipitation physics laboratory and a calibration system for improved precipitation measurements by a heterogeneous constellation of dedicated and operational microwave radiometers. NASA also plans to provide a "wild card" constellation member with a copy of the radiometer carried on the GPM Core to be placed in an orbit that maximizes the coverage and sampling of the constellation. An overview of the GPM mission concept, instrument capabilities, ground validation plans, and the expected scientific and societal benefits will be presented.

Hou, Arthur Y.↗
NASA NTRS2016

Performance Analysis of a Hardware Implemented Complex Signal Kurtosis Radio-Frequency Interference Detector

Radio-frequency interference (RFI) is a known problem for passive remote sensing as evidenced in the L-band radiometers SMOS, Aquarius and more recently, SMAP. Various algorithms have been developed and implemented on SMAP to improve science measurements. This was achieved by the use of a digital microwave radiometer. RFI mitigation becomes more challenging for microwave radiometers operating at higher frequencies in shared allocations. At higher frequencies larger bandwidths are also desirable for lower measurement noise further adding to processing challenges. This work focuses on finding improved RFI mitigation techniques that will be effective at additional frequencies and at higher bandwidths. To aid the development and testing of applicable detection and mitigation techniques, a wide-band RFI algorithm testing environment has been developed using the Reconfigurable Open Architecture Computing Hardware System (ROACH) built by the Collaboration for Astronomy Signal Processing and Electronics Research (CASPER) Group. The testing environment also consists of various test equipment used to reproduce typical signals that a radiometer may see including those with and without RFI. The testing environment permits quick evaluations of RFI mitigation algorithms as well as show that they are implementable in hardware. The algorithm implemented is a complex signal kurtosis detector which was modeled and simulated. The complex signal kurtosis detector showed improved performance over the real kurtosis detector under certain conditions. The real kurtosis is implemented on SMAP at 24 MHz bandwidth. The complex signal kurtosis algorithm was then implemented in hardware at 200 MHz bandwidth using the ROACH. In this work, performance of the complex signal kurtosis and the real signal kurtosis are compared. Performance evaluations and comparisons in both simulation as well as experimental hardware implementations were done with the use of receiver operating characteristic (ROC) curves.

radiometers↗
NASA NTRS1984

Satellite observations of sea ice

Attention is given to techniques developed by NASA for the satellite acquisition of polar ice cover data, as well as for the spotlighting of selected ice cover areas in order to reveal detailed ice pack features. Of the visible, IR and microwave sensors available aboard satellites, only microwave units operate day and night and in all weather conditions to provide global synoptic coverage. Microwave may be either passive or active; the former include the Electrically Scanning Microwave Radiometer aboard Nimbus-5 and the Scanning Multichannel Microwave Radiometer of Seasat and Nimbus-7, while the latter are represented by synthetic aperture radars and radar altimeters aboard Seasat.

Thomas, R. H.↗
NASA NTRS1992

Daily quality assurance software for a satellite radiometer system

Six Differential Microwave Radiometers (DMR) on COBE (Cosmic Background Explorer) measure the large-angular-scale isotropy of the cosmic microwave background (CMB) at 31.5, 53, and 90 GHz. Quality assurance software analyzes the daily telemetry from the spacecraft to ensure that the instrument is operating correctly and that the data are not corrupted. Quality assurance for DMR poses challenging requirements. The data are differential, so a single bad point can affect a large region of the sky, yet the CMB isotropy requires lengthy integration times (greater than 1 year) to limit potential CMB anisotropies. Celestial sources (with the exception of the moon) are not, in general, visible in the raw differential data. A 'quicklook' software system was developed that, in addition to basic plotting and limit-checking, implements a collection of data tests as well as long-term trending. Some of the key capabilities include the following: (1) stability analysis showing how well the data RMS averages down with increased data; (2) a Fourier analysis and autocorrelation routine to plot the power spectrum and confirm the presence of the 3 mK 'cosmic' dipole signal; (3) binning of the data against basic spacecraft quantities such as orbit angle; (4) long-term trending; and (5) dipole fits to confirm the spacecraft attitude azimuth angle.

Keegstra, P. B.↗
NASA NTRS1976

Surface and atmosphere parameter maps from earth-orbiting radiometers

Earlier studies have shown that an earth-orbiting electrically scanned microwave radiometer (ESMR) is capable of inferring the extent, concentration, and age of sea ice; the extent, concentration, and thickness of lake ice; rainfall rates over oceans; surface wind speeds over open water; particle size distribution in the deep snow cover of continental ice sheets; and soil moisture content in unvegetated fields. Most other features of the surface of the earth and its atmosphere require multispectral imaging techniques to unscramble the combined contributions of the atmosphere and the surface. Multispectral extraction of surface parameters is analyzed on the basis of a pertinent equation in terms of the observed brightness temperature, the emissivity of the surface which depends on wavelength and various parameters, the sensible temperature of the surface, and the total atmospheric opacity which is also wavelength dependent. Implementation of the multispectral technique is examined. Properties of the surface of the earth and its atmosphere to be determined from a scanning multichannel microwave radiometer are tabulated.

Gloersen, P.↗
NASA NTRS2001

Ground-Based Icing Condition Remote Sensing System Definition

This report documents the NASA Glenn Research Center activities to assess and down select remote sensing technologies for the purpose of developing a system capable of measuring icing condition hazards aloft. The information generated by such a remote sensing system is intended for use by the entire aviation community, including flight crews. air traffic controllers. airline dispatchers, and aviation weather forecasters. The remote sensing system must be capable of remotely measuring temperature and liquid water content (LWC), and indicating the presence of super-cooled large droplets (SLD). Technologies examined include Profiling Microwave Radiometer, Dual-Band Radar, Multi-Band Radar, Ka-Band Radar. Polarized Ka-Band Radar, and Multiple Field of View (MFOV) Lidar. The assessment of these systems took place primarily during the Mt. Washington Icing Sensors Project (MWISP) in April 1999 and the Alliance Icing Research Study (AIRS) from November 1999 to February 2000. A discussion of the various sensing technologies is included. The result of the assessment is that no one sensing technology can satisfy all of the stated project goals. Therefore a proposed system includes radiometry and Ka-band radar. A multilevel approach is proposed to allow the future selection of the fielded system based upon required capability and available funding. The most basic level system would be the least capable and least expensive. The next level would increase capability and cost, and the highest level would be the most capable and most expensive to field. The Level 1 system would consist of a Profiling Microwave Radiometer. The Level 2 system would add a Ka-Band Radar. The Level 3 system would add polarization to the Ka-Band Radar. All levels of the system would utilize hardware that is already under development by the U.S. Government. However, to meet the needs of the aviation community, all levels of the system will require further development. In addition to the proposed system, it is also recommended that NASA continue to foster the development of Multi-Band Radar and airborne microwave radiometer technologies.

Reehorst, Andrew L.↗
NASA NTRS2012

Retrieval of Ocean Surface Windspeed and Rainrate from the Hurricane Imaging Radiometer (HIRAD) Brightness Temperature Observations

The Hurricane Imaging Radiometer (HIRAD) is a new airborne synthetic aperture passive microwave radiometer capable of wide swath imaging of the ocean surface wind speed under heavy precipitation e.g. in tropical cyclones. It uses interferometric signal processing to produce upwelling brightness temperature (Tb) images at its four operating frequencies 4, 5, 6 and 6.6 GHz [1,2]. HIRAD participated in NASA s Genesis and Rapid Intensification Processes (GRIP) mission during 2010 as its first science field campaign. It produced Tb images with ~70 km swath width and 3 km resolution from a ~ 20 km altitude. From this, ocean surface wind speed and column averaged atmospheric liquid water content can be retrieved across the swath. The column averaged liquid water then could be related to an average rain rate. The retrieval algorithm (and the HIRAD instrument itself) is a direct descendant of the nadir-only Stepped Frequency Microwave Radiometer that is used operationally by the NOAA Hurricane Research Division to monitor tropical cyclones [3,4]. However, due to HIRAD s slant viewing geometry (compared to nadir viewing SFMR) a major modification is required in the algorithm. Results based on the modified algorithm from the GRIP campaign will be presented in the paper.

Biswas, Sayak K.↗
NASA NTRS2005

Prototype Cryospheric Experimental Synthetic Aperture Radiometer (CESAR)

Present satellite microwave radiometers typically have a coarse spatial resolution of several kilometers or more. This is only adequate only over homogenous areas. Significantly enhanced spatial resolution is critically important to reduce the uncertainty of estimated cryospheric parameters in heterogeneous and climatically-sensitive areas. Examples include: (1) dynamic sea ice areas with frequent lead and polynya developments and variable ice thicknesses, (2) mountainous areas that require improved retrieval of snow water equivalent, and (3) melting outlet glacier or ice shelf areas along the coast of Greenland and Antarctica. For these situations and many others, an Earth surface spot size of no more than 100 m is necessary to retrieve the information needed for significant new scientific progress, including the synthesis of field observations with satellite observations with high confidence.

Hilliard, Lawrence M.↗
NASA NTRS1986

Reduction of weather effects in the calculation of sea ice concentration from microwave radiances

A technique is presented which improves existing methods of calculating sea ice concentrations from microwave radiances by reducing weather-related effects over open ocean areas and in the vicinity of marginal sea ice zones. Winds, atmospheric water vapor, cloud liquid water, and rain increase the microwave emission over these regions and thus result in erroneous values of computed sea ice concentration. The method described is based on the microwave spectral properties of sea ice and ice-free ocean and utilizes ratios of the polarized radiances at the 0.81-cm (37 GHz) and 1.7-cm (18 GHz) wavelengths. Following a discussion of the physical basis for this technique, examples are provided which demonstrate its utility. While the technique was developed for use with the Nimbus 7 scanning multichannel microwave radiometer data, it is applicable also to data from other microwave radiometers operating in a similar wavelength range.

Gloersen, P.↗
NASA NTRS1980

Digital simulation of dynamic processes in radiometer systems

The development and application of several computer programs for simulating different classes of microwave radiometers are described. The programs are dynamic in nature, and they may be used to determine the instantaneous behavior of system variables as a function of time. Some of the programs employ random variable models in the simulations so that the statistical nature of the results may be investigated. The programs have been developed to utilize either the Continuous System Modeling Program or the Advanced Continuous System Language. The validity of most of the programs was investigated using statistical tests, and the results show excellent correlation with theoretical predictions. The programs are currently being used in the investigation of new design techniques for microwave radiometers.

Stanley, W. D.↗
NASA NTRS2003

Design Study of a Synthetic Thinned Aperture Radiometer for Hurricane Impact Prediction

The principle accomplishments involve a conceptual design of an airborne Hurricane Imaging (microwave) Radiometer (HiRad) instrument for use in operational hurricane surveillance. The basis of the HiRad design is the Stepped Frequency Microwave Radiometer (SFMR) that has successfully measured surface wind speed and rain rate in hurricanes from the NOAA Hurricane Research Division s P-3 aircraft. Unlike the SFMR that views only at nadir, the HiRad provides wide-swath measurements between +/- 45 deg. in incidence angle with a spot-beam spatial resolution of approximately 1-3 km. The system operates at four equally spaced frequency channels that cover a range between 4 GHz and 6 GHz. The final report consists of two parts. Part 1 is a reprint of a conference proceeding presented at the 2002 International Geoscience and Remote Sensing Symposium and authored by the principle members of the HiRad design team. Part 2 is a summary of the MMIC receiver design developed to support the HiRad sensor.

Ruf, Christopher S.↗
NASA NTRSDate not supplied

Geophysical Retrievals and Cloud Analyses from Merged Airborne Radiometer Datasets Covering 10–684 GHz

Airborne microwave radiometers provide insight about numerous aspects of Earth’s atmosphere and yield critical validation datasets for spaceborne radiometers. Three radiometers that are important to NASA’s airborne remote-sensing arsenal include: the Advanced Microwave Precipitation Radiometer (AMPR), covering 10–85 GHz; the Conical Scanning Millimeter-wave Imaging Radiometer (CoSMIR), covering 50–183 GHz; and the Compact Scanning Submillimeter-wave Imaging Radiometer (CoSSIR), covering 170–684 GHz. The NASA field campaigns of interest to this study include: the Integrated Precipitation and Hydrology Experiment (IPHEx) in 2014, the Olympic Mountains Experiment and Radar Definition Experiment (OLYMPEX/RADEX) in 2015–2016, the Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Snowstorms (IMPACTS) in 2020–2023, and the Airborne Lightning Observatory for FEGS and TGFs (ALOFT) in 2023. To provide a more comprehensive perspective on clouds and precipitation observed during these airborne field campaigns, AMPR data were merged spatiotemporally with CoSMIR data for IPHEx, OLYMPEX/RADEX, and IMPACTS (2020 and 2022), while considering differences in instrument characteristics and operations, providing brightness temperature (Tb) values from 10–183 GHz in a common background grid throughout each flight. AMPR and CoSSIR data were similarly merged for IMPACTS (2023) and ALOFT, providing a common background grid with Tb values covering 10–684 GHz throughout each flight. These merged Tb data were employed in geophysical retrievals using the Community Radiative Transfer Model (CRTM), an Eddington radiative transfer model, and a one-dimensional variational (1DVAR) inversion method. Retrievals of cloud liquid water path were of primary interest. This presentation will include an overview of the methods for the radiometer data mergers, the radiative transfer methods, the geophysical retrievals, and detailed results from examining trends in Tb and cloud liquid water path in clouds, precipitation, and cloud-to-precipitation transition zones.

Corey G Amiot↗
NASA NTRS2002

Calibration Plans for the Global Precipitation Measurement (GPM)

The Global Precipitation Measurement (GPM) is an international effort led by the National Aeronautics and Space Administration (NASA) of the U.S.A. and the National Space Development Agency of Japan (NASDA) for the purpose of improving research into the global water and energy cycle. GPM will improve climate, weather, and hydrological forecasts through more frequent and more accurate measurement of precipitation world-wide. Comprised of U.S. domestic and international partners, GPM will incorporate and assimilate data streams from many spacecraft with varied orbital characteristics and instrument capabilities. Two of the satellites will be provided directly by GPM, the core satellite and a constellation member. The core satellite, at the heart of GPM, is scheduled for launch in November 2007. The core will carry a conical scanning microwave radiometer, the GPM Microwave Imager (GMI), and a two-frequency cross-track-scanning radar, the Dual-frequency Precipitation Radar (DPR). The passive microwave channels and the two radar frequencies of the core are carefully chosen for investigating the varying character of precipitation over ocean and land, and from the tropics to the high-latitudes. The DPR will enable microphysical characterization and three-dimensional profiling of precipitation. The GPM-provided constellation spacecraft will carry a GMI radiometer identical to that on the core spacecraft. This paper presents calibration plans for the GPM, including on-board instrument calibration, external calibration methods, and the role of ground validation. Particular emphasis is on plans for inter-satellite calibration of the GPM constellation. With its Unique instrument capabilities, the core spacecraft will serve as a calibration transfer standard to the GPM constellation. In particular the Dual-frequency Precipitation Radar aboard the core will check the accuracy of retrievals from the GMI radiometer and will enable improvement of the radiometer retrievals. Observational intersections of the core with the constellation spacecraft are essential in applying this technique to the member satellites. Information from core spacecraft retrievals during intersection events will be transferred to the constellation radiometer instruments in the form of improved calibration and, with experience, improved radiometric algorithms. In preparation for the transfer standard technique, comparisons using the Tropical Rainfall Measuring Mission (TRMM) with sun-synchronous radiometers have been conducted. Ongoing research involves study of critical variables in the inter-comparison, such as correlation with spatial-temporal separation of intersection events, frequency of intersection events, variable azimuth look angles, and variable resolution cells for the various sensors.

Bidwell, S. W.↗
NASA NTRSDate not supplied

Microwave and mm-Wave Radiometry for Earth and Planetary Science

Microwave radiometry has been an indispensable tool for observing Earth and the solar system since the 1960s. On Earth, microwave radiometers are used to observe ocean, land, ice, and atmosphere. Calibrating a microwave radiometer and measuring an LNA noise figure use the same principals. There is opportunity to improve upon the state-of-the-art methods in both space and lab environments by leveraging lessons learned in one for the other.

microwave radiometry↗
NASA NTRS2013

RF Reference Switch for Spaceflight Radiometer Calibration

The goal of this technology is to provide improved calibration and measurement sensitivity to the Soil Moisture Active Passive Mission (SMAP) radiometer. While RF switches have been used in the past to calibrate microwave radiometers, the switch used on SMAP employs several techniques uniquely tailored to the instrument requirements and passive remote-sensing in general to improve radiometer performance. Measurement error and sensitivity are improved by employing techniques to reduce thermal gradients within the device, reduce insertion loss during antenna observations, increase insertion loss temporal stability, and increase rejection of radar and RFI (radio-frequency interference) signals during calibration. The two legs of the single-pole double-throw reference switch employ three PIN diodes per leg in a parallel-shunt configuration to minimize insertion loss and increase stability while exceeding rejection requirements at 1,413 MHz. The high-speed packaged diodes are selected to minimize junction capacitance and resistance while ensuring the parallel devices have very similar I-V curves. Switch rejection is improved by adding high-impedance quarter-wave tapers before and after the diodes, along with replacing the ground via of one diode per leg with an open circuit stub. Errors due to thermal gradients in the switch are reduced by embedding the 50-ohm reference load within the switch, along with using a 0.25-in. (approximately equal to 0.6-cm) aluminum prebacked substrate. Previous spaceflight microwave radiometers did not embed the reference load and thermocouple directly within the calibration switch. In doing so, the SMAP switch reduces error caused by thermal gradients between the load and switch. Thermal issues are further reduced by moving the custom, highspeed regulated driver circuit to a physically separate PWB (printed wiring board). Regarding RF performance, previous spaceflight reference switches have not employed high-impedance tapers to improve rejection. The use of open-circuit stubs instead of a via to provide an improved RF short is unique to this design. The stubs are easily tunable to provide high rejection at specific frequencies while maintaining very low insertion loss in-band.

Knuble, Joseph↗