Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “maximum principle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

First-principles study of surface properties of crystalline and amorphous uranium aluminides

Surface energy is a crucial material property required for the modeling of fission gas bubble behavior in nuclear materials. However, there is no information available regarding the surface properties of uranium aluminides. In this work we systematically investigate the surface properties of uranium aluminides (UAl 3 and UAl 4 ) by first-principles density functional theory (DFT) calculations. Specifically, a total of 13 surface orientations with a maximum Miller index (MMI) up to 3 are studied for cubic UAl 3 , while 19 surfaces with a MMI of 2 for orthorhombic UAl 4 . Using the surface energies predicted by DFT, the surface properties of equilibrium single crystal UAl 3 and UAl 4 , including surface area weighted surface energy, dominant surface orientations and surface anisotropy, are obtained from Wulff construction. To understand gas bubble behaviors in amorphous uranium aluminides under irradiation, we study the surface properties of amorphous UAl 3 and UAl 4 . Compared to the crystalline phases, the amorphous phases are found to have lower surface energies due to the reduced number of breaking U-Al bonds close to the surface. The currently obtained surface properties of UAl 3 and UAl 4 can be used for the future modeling of gas bubble behaviors in both crystalline and amorphous uranium aluminide fuels.

36 MATERIALS SCIENCE↗

First-Principles Treatment of Vibrational Broadening in X-Ray Excited Valence Band Spectra for n-SrTiO 3 (001)

The valence band maximum (VBM) is an important quantity for semiconductors as it locates the Fermi level relative to the band edge. Accurate measurement of this quantity in near-surface regions of semiconductors by photoemission is a first step toward determining the electronic properties of heterostructures involving these materials. While extrapolating the leading edge of the valence band to the energy axis in photoemission spectra is a widely used way to find the VBM, this method can be ambiguous if the leading edge exhibits multiple slopes. Another way to determine the VBM is to fit the leading edge to an appropriately broadened, cross-section modulated theoretical density of states (DOS). Three kinds of broadening that should be included for maximum accuracy are those due to: (1) finite instrumental resolution, (2) valence hole lifetime, and (3) vibrational excitations. While steps (1) and (2) are straightforward to implement, (3) is more difficult because the appropriate amount of broadening is not known a priori. Here, we demonstrate that explicit inclusion of vibrational broadening using ab initio molecular dynamics facilitates accurate VBM determination for n-SrTiO 3 (001). The total DOS is constructed by summing time-averaged projections at elevated temperature onto s - , p - , and d orbitals for the constituent atoms and modulating with the associated photoemission cross sections. Subsequent convolutions of the total DOS, first with a Gaussian of width equal to the experimental energy resolution and second with a Lorentzian to simulate valence hole lifetime effects, yield line shapes that reproduce the experimental leading edges rather well. The VBM is then given by the energy at which the vibrationally broadened total DOS (prior to the convolutions) goes to zero. The VBMs generated by this method quantitatively agree with those resulting from extrapolating from the middle of the measured leading edge for SrTiO 3 .

36 MATERIALS SCIENCE↗

Microstructure and Mechanical Properties of Multilayer α-AlN/α-BCN Coating as Functions of the Current Density during Sputtering of a B{sub 4}C Target

Multilayer AlN/BCN coating of nanometer scale have been prepared by magnetron sputtering of Al and B{sub 4}C targets in an argon–nitrogen atmosphere during deposition on a Si substrate. These coating have an X-ray amorphous structure and the maximum Knoop hardness of 27 GPa (at the current density 100 mA). The first-principle molecular dynamics calculations show that the B4–BN layer is dynamically unstable; thus, it will not be epitaxial and will be amorphous or have a structure different from the B4–BN structure. The thermal vacuum annealing from 600 to 800°C of samples with multilayer nanosized coating leads to the decrease in the Knoop hardness to 18 GPa; however, the coating structure is retained X-ray amorphous.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Perpendicular Diffusion of Solar Energetic Particles: Model Results and Implications for Electrons

The processes responsible for the effective longitudinal transport of solar energetic particles (SEPs) are still not completely understood. We address this issue by simulating SEP electron propagation using a spatially 2D transport model that includes perpendicular diffusion. By implementing, as far as possible, the most reasonable estimates of the transport (diffusion) coefficients, we compare our results, in a qualitative manner, to recent observations at energies of 55–105 keV, focusing on the longitudinal distribution of the peak intensity, the maximum anisotropy, and the onset time. By using transport coefficients that are derived from first principles, we limit the number of free parameters in the model to (i) the probability of SEPs following diffusing magnetic field lines, quantified by a∈[0,1], and (ii) the broadness of the Gaussian injection function. It is found that the model solutions are extremely sensitive to the magnitude of the perpendicular diffusion coefficient and relatively insensitive to the form of the injection function as long as a reasonable value of a = 0.2 is used. We illustrate the effects of perpendicular diffusion on the model solutions and discuss the viability of this process as a dominant mechanism by which SEPs are transported in longitude. Lastly, we try to quantity the effectiveness of perpendicular diffusion as an interplay between the magnitude of the relevant diffusion coefficient and the SEP intensity gradient driving the diffusion process. It follows that perpendicular diffusion is extremely effective early in an SEP event when large intensity gradients are present, while the effectiveness quickly decreases with time thereafter.

79 ASTRONOMY AND ASTROPHYSICS↗

Perspectives: Black Holes

When asked to discuss Cyg XR-1, E. E. Salpeter once concluded, 'A black hole in Cyg X(R)-1 is the most conservative hypothesis.' Recent observations now make it likely that a black hole in Cyg XR-1 is the only hypothesis tenable. Chandrasekhar first showed that compact stars - those with the inward force of gravity on their outer layers balanced by the pressure generated by the Pauli exclusion principle acting on its electrons (in white dwarfs) or nucleons (in neutron stars) - have a maximum mass. Equilibrium is achieved at a minimum of the total energy of the star, which is the sum of the positive Fermi energy and the negative gravitational energy. The maximum mass attainable in equilibrium is found by setting E = 0: M(max) = 1.5 M(Sun). If the mass of the star is larger than this, then E can be decreased without bound by decreasing the star's radius and increasing its (negative) gravitational energy. No equilibrium value of the radius exist, and general relativity predicts that gravitational collapse to a point occurs. This point singularity is a black hole.

Dolan, Joseph F.↗

Semiconductor structure and devices

Semiconductor devices such as lasers which include a substrate with a channel therein with a clad layer overlying the substrate and filling the channel exhibit irregularities such as terraces in the surface of the clad layer which are detrimental to device performance. These irregularities are substantially eliminated by forming the channel in a surface of a buffer layer greater than about 4 micrometers thick on the substrate and forming the clad layer over the buffer layer and the channel. CW lasers incorporating the principles of the invention exhibit the highest output power in a single spatial mode and maximum output power which have been observed to date.

Dinkel, Nancy A.↗

Design and Information Content of Arrays of Sorption-based Vapor Sensors using Solubility Interactions and Linear Solvation Energy Relationships

The sorption of vapors by the selective polymeric layer on a chemical vapor sensor is described in detail and dissected into fundamental solubility interactions. The sorption process is modeled in terms of solvation parameters for vapor solubility properties and linear solvation energy relationships. The latter relationships model the log of the partition coefficient as the sum of terms related to specific types of interactions. The approaches are particularly applicable to the design and understanding of acoustic wave chemical vapor sensors such as those based on surface acoustic wave devices. It is shown how an understanding of solubility interactions informs the selection of polymers to obtain chemical diversity in sensor arrays and obtain the maximum amount of chemical information. The inherent dimensionality of the array data, as analyzed by principle components analysis, is consistent with this formulation. Furthermore, it is shown how new chemometric methods have been developed to extract the chemical information from array responses in terms of solvation parameters serving as de-scriptors of the detected vapor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two-dimensional Cascade Investigation of the Maximum Exit Tangential Velocity Component and Other Flow Conditions at the Exit of Several Turbine Blade Designs at Supercritical Pressure Ratios

The nature of the flow at the exit of a row of turbine blades for the range of conditions represented by four different blade configurations was evaluated by the conservation-of-momentum principle using static-pressure surveys and by analysis of Schlieren photographs of the flow. It was found that for blades of the type investigated, the maximum exit tangential-velocity component is a function of the blade geometry only and can be accurately predicted by the method of characteristics. A maximum value of exit velocity coefficient is obtained at a pressure ratio immediately below that required for maximum blade loading followed by a sharp drop after maximum blade loading occurs.

TURBINES - AXIAL FLOW↗

Instrument Display Visual Angles for Conventional Aircraft and the MQ-9 Ground Control Station

Aircraft instrument panels should be designed such that primary displays are in optimal viewing location to minimize pilot perception and response time. Human Factors engineers define three zones (i.e. cones ) of visual location: 1) "Easy Eye Movement" (foveal vision); 2) "Maximum Eye Movement" (peripheral vision with saccades), and 3) "Head Movement (head movement required). Instrument display visual angles were measured to determine how well conventional aircraft (T-34, T-38, F- 15B, F-16XL, F/A-18A, U-2D, ER-2, King Air, G-III, B-52H, DC-10, B747-SCA) and the MQ-9 ground control station (GCS) complied with these standards, and how they compared with each other. Selected instrument parameters included: attitude, pitch, bank, power, airspeed, altitude, vertical speed, heading, turn rate, slip/skid, AOA, flight path, latitude, longitude, course, bearing, range and time. Vertical and horizontal visual angles for each component were measured from the pilot s eye position in each system. The vertical visual angles of displays in conventional aircraft lay within the cone of "Easy Eye Movement" for all but three of the parameters measured, and almost all of the horizontal visual angles fell within this range. All conventional vertical and horizontal visual angles lay within the cone of Maximum Eye Movement. However, most instrument vertical visual angles of the MQ-9 GCS lay outside the cone of Easy Eye Movement, though all were within the cone of Maximum Eye Movement. All the horizontal visual angles for the MQ-9 GCS were within the cone of "Easy Eye Movement". Most instrument displays in conventional aircraft lay within the cone of Easy Eye Movement, though mission-critical instruments sometimes displaced less important instruments outside this area. Many of the MQ-9 GCS systems lay outside this area. Specific training for MQ-9 pilots may be needed to avoid increased response time and potential error during flight. The learning objectives include: 1) Know three physiologic cones of eye/head movement; 2) Understand how instrument displays comply with these design principles in conventional aircraft and an uninhabited aerial vehicle system. Which of the following is NOT a recognized physiologic principle of instrument display design? Cone of Easy Eye Movement 2) Cone of Binocular Eye Movement 3) Cone of Maximum Eye Movement 4) Cone of Head Movement 5) None of the above. Answer: # 2) Cone of Binocular Eye Movement

Kamine, Tovy Haber↗

ON THE MAXIMUM MASS OF STELLAR BLACK HOLES

We present the spectrum of compact object masses: neutron stars and black holes (BHs) that originate from single stars in different environments. In particular, we calculate the dependence of maximum BH mass on metallicity and on some specific wind mass loss rates (e.g., Hurley et al. and Vink et al.). Our calculations show that the highest mass BHs observed in the Galaxy M{sub bh} {approx} 15 M{sub sun} in the high metallicity environment (Z = Z{sub sun} = 0.02) can be explained with stellar models and the wind mass loss rates adopted here. To reach this result we had to set luminous blue variable mass loss rates at the level of {approx}10{sup -4} M{sub sun} yr{sup -1} and to employ metallicity-dependent Wolf-Rayet winds. With such winds, calibrated on Galactic BH mass measurements, the maximum BH mass obtained for moderate metallicity (Z = 0.3 Z{sub sun} = 0.006) is M{sub bh,max} = 30 M{sub sun}. This is a rather striking finding as the mass of the most massive known stellar BH is M{sub bh} = 23-34 M{sub sun} and, in fact, it is located in a small star-forming galaxy with moderate metallicity. We find that in the very low (globular cluster-like) metallicity environment the maximum BH mass can be as high as M{sub bh,max} = 80 M{sub sun} (Z = 0.01 Z{sub sun} = 0.0002). It is interesting to note that X-ray luminosity from Eddington-limited accretion onto an 80 M{sub sun} BH is of the order of {approx}10{sup 40} erg s{sup -1} and is comparable to luminosities of some known ultra-luminous X-ray sources. We emphasize that our results were obtained for single stars only and that binary interactions may alter these maximum BH masses (e.g., accretion from a close companion). This is strictly a proof-of-principle study which demonstrates that stellar models can naturally explain even the most massive known stellar BHs.

79 ASTRONOMY AND ASTROPHYSICS↗

Phonon Density of States of LaFeAsO1-xFx

We have studied the phonon density of states (PDOS) in LaFeAsO1 xFx with inelastic neutron scattering methods. The PDOS of the parent compound (x=0) is very similar to the PDOS of samples optimally doped with uorine to achieve the maximum Tc (x 0:1). Good agreement is found between the experimental PDOS and first-principle calculations with the exception of a small di erence in Fe mode frequencies. The PDOS reported here is not consistent with conventional electron-phonon mediated superconductivity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Multibody Interplanetary Swingby Trajectories /MIST-1/

Computer program incorporates new isolation procedure to determine interplanetary trajectories which utilize a maximum of three flybys. Program also computes singe planet flybys and direct transfer trajectories. The three principle systems employed in MIST-1 use as their fundamental plane the mean plane of the earth's orbit around the sun.

Davis, D. A.↗

A community survey of helicopter noise annoyance conducted under controlled noise exposure conditions

Reactions to low numbers of helicopter noise events (less than 50 per day) were studied in a community setting. Community residents were repeatedly interviewed about daily noise annoyance reactions on days when helicopter noise exposures were, without the residents' knowledge, controlled. The effects of maximum noise level and number of noise events on helicopter noise annoyance are consistent with the principles contained in LEQ-based noise indices. The effect of the duration of noise events is also consistent with LEQ-based indices. After removing the effect of differences in noise levels (LEQ) there is not an important difference between reactions to impulsive and nonimpulsive types of helicopters. EPNL, where corrected for number of overflights, and LEQ are approximately equally successful in representing the characteristics of noise which are related to human response. The new type of design provided estimates of the parameters in a noise reaction model which would not obtained with a similar degree of precision from conventional study designs.

Fields, J. M.↗

Models of TCP in high-BDP environments and their experimental validation

In recent years, the computer networking community has seen a steady growth in bandwidth-delay products (BDPs). Several TCP variants were created to combat the shortcomings of legacy TCP when it comes to operation in high-BDP environments. These variants, among which are CUBIC, STCP, and H-TCP, have been extensively studied in some empirical contexts, and some analytical models exist for CUBIC and STCP. However, since these studies have been conducted, BDPs have risen even more, and new bulk data transfer tools have emerged that utilize multiple parallel TCP streams. In view of these new developments, it is imperative to revisit the question: Which congestion control algorithms are best adapted to current networking environments? In order to help resolve this question, we contribute the following: (i) using first principles, we develop a general throughput-prediction framework that takes into account buffer sizes and maximum window constraints; (ii) we validate the models using measurements and achieve low prediction errors; (iii) we note differences in TCP dynamics between two experimental configurations and find one of them to be significantly more deterministic than the other; we also find that CUBIC and H-TCP outperform STCP, especially when multiple streams are used; and (iv) we present preliminary results for modelling multiple TCP streams for CUBIC and STCP.

Vardoyan, G.↗

Optimal feed flow sequence for multi-effect distillation system integrated with supercritical carbon dioxide Brayton cycle for seawater desalination

Multi-effect distillation is often integrated with a Rankine power cycle for cogeneration (simultaneous production of power and desalinated water). Such integration increases the condenser operating pressure for the Rankine cycle (and increases the heat-rejection temperature) to produce desalinated water, resulting in decreased power-plant efficiency. The supercritical carbon dioxide Brayton cycle has a higher efficiency compared to the Rankine cycle. The waste heat rejected from supercritical carbon dioxide Brayton cycle is at sufficiently hot temperature to have feasible energy integration with multi-effect distillation system. The paper introduces the novel concept of cogeneration without being a parasitic load to the power cycle. For the illustrative example considered, integrating 4-effect distillation system with a 115 MWe power plant can produce 3041 m3 of distillate per day at 1.06 $/m3, at a constant power plant efficiency of 49.2%. The pattern in which feed enters the desalination system often dictates its energy consumption. The two most commonly used feed configurations for multi-effect distillation system are parallel/cross feed and forward feed. With steam as a heat source (i.e., a latent heat source), parallel/cross feed is the most energy-efficient feed configuration. The other objective of this paper is to identify the optimal feed flow configuration for multi-effect distillation system integrated with a supercritical carbon dioxide power cycle (i.e., a sensible heat source). For the simplified network, forward feed is the best feed configuration, which yields a 7.5% increase in distillate production at 2.6% reduced distillate cost. Additionally, different methods for reducing the brine discharge are studied, which can help to achieve zero liquid discharge. Result show increasing the maximum brine concentration gives superior results compared to brine recycling. The system modelling is done using the principle of process integration, and an analytical methodology for cogeneration is derived.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Quaternary Semiconductors with Positive Crystal Field Splitting: Potential High-Efficiency Spin-Polarized Electron Sources

Traditional high efficiency spin-polarized electron sources (SPES) consist mainly of binary or pseudobinary zinc-blende GaAs based materials, whereas their ternary analogs II-IV-V{sub 2} (II = Zn, Cd, IV = Si, Ge, Sn, and V = As) as well as II-VI ternary analogs I-III-VI{sub 2} (I = Cu, Ag, III = Al, Ga, In, and VI = Se) have not drawn wide attention because their crystal field splitting {Delta}{sub CF} near the valence band maximum is either negative or close to zero in their ground state chalcopyrite structure. Using first-principles calculations, we show that some derivative quaternary I-III-II{sub 2}-VI{sub 4} and II-IV-III{sub 2}-V{sub 4} compounds can have coherent ground state stannite or kesterite structures with large and positive {Delta}{sub CF} due to their increased chemical and structural flexibility. We propose that ZnSiAl{sub 2}As{sub 4} and CdGeAl{sub 2}As{sub 4} in the stannite structure, and ZnSnGa{sub 2}As{sub 4} and CuAlCd{sub 2}Se{sub 4} in the kesterite structure could be good candidate SPES materials with high polarization and quantum efficiency.

14 SOLAR ENERGY↗

Cobalt as a promising dopant for producing semi-insulating β-Ga 2 O 3 crystals: Charge state transition levels from experiment and theory

Optical absorption and photoconductivity measurements of Co-doped β-Ga 2 O 3 crystals reveal the photon energies of optically excited charge transfer between the Co related deep levels and the conduction or valence band. The corresponding photoionization cross sections are fitted by a phenomenological model considering electron–phonon coupling. The obtained fitting parameters: thermal ionization (zero-phonon transition) energy, Franck–Condon shift, and effective phonon energy are compared with corresponding values predicted by first principle calculations based on density functional theory. A (+/0) donor level ~0.85 eV above the valence band maximum and a (0/-) acceptor level ~2.1 eV below the conduction band minimum are consistently derived. Temperature-dependent electrical resistivity measurement at elevated temperatures (up to 1000 K) yields a thermal activation energy of 2.1 ± 0.1 eV, consistent with the position of the Co acceptor level. Furthermore, the results show that Co doping is promising for producing semi-insulating β-Ga 2 O 3 crystals.

Materials science↗

Risk Classification Modernization

NASA’s risk classification system dates back to an era when every new NASA space mission was a one-of-a-kind build, and the only way to obtain reliability was as a by-product through a combination of reliability analyses, extensive and stringent quality requirements, and extensive testing. Originally, there were very limited commercial capabilities to develop systems to work reliably in space, so NASA considered its own homegrown approach the only recipe for success. This approach involved very detailed and prescriptive piece-part controls and no reliance on (and to some extent a rejection of) any type of commercial practices. Often risk was considered to be the lowest when NASA had the maximum amount of control and prescription, and the highest when commercial practices were largely employed, and these principles drove risk classification in the agency. Over time, however, commercial capabilities grew, and many products became standardized and commercialized, while the agency maintained its tried-and-true approach, paying little attention to the evolution of the commercial sector. This presentation introduces GSFC’s new approach at risk classification, which includes classification of components and full spacecraft, as well as of constellations of spacecraft.

risk↗