Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “matrix”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

An advanced algorithm for construction of Integral Transport Matrix Method operators using accumulation of single cell coupling factors

The Integral Transport Matrix Method (ITMM) has been shown to be an effective method for solving the neutron transport equation in large domains on massively parallel architectures. In the limit of very large number of processors, the speed of the algorithm, and its suitability for unstructured meshes, i.e. other than an ordered Cartesian grid, is limited by the construction of four matrix operators required for obtaining the solution in each sub-domain. The existing algorithm used for construction of these matrix operators, termed the differential mesh sweep, is computationally expensive and was developed for a structured grid. This work proposes the use of a new algorithm for construction of these operators based on the construction of a single, fundamental matrix representing the transport of a particle along every possible path throughout the sub-domain mesh. Each of the operators is constructed by multiplying an element of this fundamental matrix by two factors dependent only upon the operator being constructed and on properties of the emitting and incident cells. The ITMM matrix operator construction time for the new algorithm is demonstrated to be shorter than the existing algorithm in all tested cases with both isotropic and anisotropic scattering considered. While also being a more efficient algorithm on a structured Cartesian grid, the new algorithm is promising in its geometric robustness and potential for being applied to an unstructured mesh, with the ultimate goal of application to an unstructured tetrahedral mesh on a massively parallel architecture. (authors)

97 MATHEMATICS AND COMPUTING↗

Fission matrix capability for MCNP, Part II - Applications

This paper describes the initial experience and results from implementing a fission matrix capability into the MCNP Monte Carlo code. The fission matrix is obtained at essentially no cost during the normal simulation for criticality calculations. It can be used to provide estimates of the fundamental mode power distribution, the reactor dominance ratio, the eigenvalue spectrum, and higher mode spatial eigenfunctions. It can also be used to accelerate the convergence of the power method iterations. Past difficulties and limitations of the fission matrix approach are overcome with a new sparse representation of the matrix, permitting much larger and more accurate fission matrix representations. Numerous examples are presented. A companion paper (Part I - Theory) describes the theoretical basis for the fission matrix method. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

The Iterated Fission Matrix Method

The fission matrix (FM) method has been successfully demonstrated for different applications. One of the interesting features of this method, which is not possible via standard criticality source Monte Carlo calculations, is the capability to calculate higher forward and adjoint Eigenmodes; however, the accuracy of the estimates for higher eigenvalues strongly depends on the spatial discretization adopted for the fission matrix. A fine mesh ensures accurate results but requires matrices of large size. This is considered a limitation to the applicability of the FM method due to the memory requirements for storage of large full matrices. The adoption of sparse matrix storage (e.g., in MCNP) partially overcomes this problem; nonetheless, the sparse matrix indexing increases the complexity of the implementation of the FM algorithm and introduces the additional task of sparsifying the fission matrix. This summary presents a new method, named the iterated fission matrix (IFM), that allows to estimate higher eigenvalues of multiplying systems on much smaller meshes, but with the same level of accuracy in terms of spatial discretization errors, as compared to the FM method. The following Sections describe this new approach and provide a demonstration using two case studies: a PWR fuel assembly, and a 2D PWR core. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Matrix solution of coupling impedance in multi-layer circular cyclindrical structures

Continuing interest in computing the coupling impedance of cylindrical multi-layer beam tubes led to several recent publications. A novel matrix method is here presented in which radial wave propagation is treated in analogy to longitudinal transmission lines. Starting from the Maxwell equations the solutions for monopole electromagnetic fields are in each layer described by a 2 x 2 matrix. Assuming isotropic material properties within one layer, the radially transverse field components at the inner boundary of a layer are uniquely determined by matrix transfer of the field components at its outer boundary. By imposing power flow constraints on the matrix, field matching between layers is enforced and replaced by matrix multiplication. The coupling impedance of a stainless steel beam tube defined by a matrix is given as a representative demonstration.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A new coal-permeability model: Internal swelling stress and fracture-matrix interaction

We have developed a new coal-permeability model for uniaxial strain and constant confining stress conditions. The model is unique in that it explicitly considers fracture-matrix interaction during coal deformation processes and is based on a newly proposed internal-swelling stress concept. This concept is used to account for the impact of matrix swelling (or shrinkage) on fracture-aperture changes resulting from partial separation of matrix blocks by fractures that do not completely cut through the whole matrix. The proposed permeability model is evaluated with data from three Valencia Canyon coalbed wells in the San Juan Basin, where increased permeability has been observed during CH{sub 4} gas production, as well as with published data from laboratory tests. Model results are generally in good agreement with observed permeability changes. The importance of fracture-matrix interaction in determining coal permeability, demonstrated in this work using relatively simple stress conditions, underscores the need for a dual-continuum (fracture and matrix) mechanical approach to rigorously capture coal-deformation processes under complex stress conditions, as well as the coupled flow and transport processes in coal seams.

54 ENVIRONMENTAL SCIENCES↗

Structural conserved moiety splitting of a stoichiometric matrix

Characterising biochemical reaction network structure in mathematical terms enables the inference of functional biochemical consequences from network structure with existing mathematical techniques and spurs the development of new mathematics that exploits the peculiarities of biochemical network structure. The structure of a biochemical network may be specified by reaction stoichiometry, that is, the relative quantities of each molecule produced and consumed in each reaction of the network. A biochemical network may also be specified at a higher level of resolution in terms of the internal structure of each molecule and how molecular structures are transformed by each reaction in a network. The stoichiometry for a set of reactions can be compiled into a stoichiometric matrix N ϵ Z mxn where each row corresponds to a molecule and each column corresponds to a reaction. We demonstrate that a stoichiometric matrix may be split into the sum of m - rank(N) moiety transition matrices, each of which corresponds to a subnetwork accessible to a structurally identifiable conserved moiety. The existence of this moiety matrix splitting is a property that distinguishes a stoichiometric matrix from an arbitrary rectangular matrix.

59 BASIC BIOLOGICAL SCIENCES↗

Spin orbit coupling for molecular ab initio density matrix renormalization group calculations: Application to g-tensors

Spin Orbit Coupling (SOC) is introduced to molecular ab initio density matrix renormalization group (DMRG) calculations. In the presented scheme, one first approximates the electronic ground state and a number of excited states of the Born-Oppenheimer (BO) Hamiltonian with the aid of the DMRG algorithm. Owing to the spin-adaptation of the algorithm, the total spin S is a good quantum number for these states. After the non-relativistic DMRG calculation is finished, all magnetic sublevels of the calculated states are constructed explicitly, and the SOC operator is expanded in the resulting basis. To this end, spin orbit coupled energies and wavefunctions are obtained as eigenvalues and eigenfunctions of the full Hamiltonian matrix which is composed of the SOC operator matrix and the BO Hamiltonian matrix. This treatment corresponds to a quasi-degenerate perturbation theory approach and can be regarded as the molecular equivalent to atomic Russell-Saunders coupling. For the evaluation of SOC matrix elements, the full Breit-Pauli SOC Hamiltonian is approximated by the widely used spin-orbit mean field operator. This operator allows for an efficient use of the second quantized triplet replacement operators that are readily generated during the non-relativistic DMRG algorithm, together with the Wigner-Eckart theorem. With a set of spin-orbit coupled wavefunctions at hand, the molecular g-tensors are calculated following the scheme proposed by Gerloch and McMeeking. It interprets the effective molecular g-values as the slope of the energy difference between the lowest Kramers pair with respect to the strength of the applied magnetic field. Test calculations on a chemically relevant Mo complex demonstrate the capabilities of the presented method.

74 ATOMIC AND MOLECULAR PHYSICS↗

Rephasing invariants of the Cabibbo-Kobayashi- Maskawa matrix

The paper is motivated by the importance of the rephasing invariance of the CKM (Cabibbo-Kobayashi-Maskawa) matrix observables. These observables appear in the discussion of the CP violation in the standard model (Jarlskog invariant) and also in the renormalization group equations for the quark Yukawa couplings. Our discussion is based on the general phase invariant monomials built out of the CKM matrix elements and their conjugates. We show that there exist 30 fundamental phase invariant monomials and 18 of them are a product of 4 CKM matrix elements and 12 are a product of 6 CKM matrix elements. In the main theorem we show that a general rephasing invariant monomial can be expressed as a product of at most five factors: four of them are fundamental phase invariant monomials and the fifth factor consists of powers of squares of absolute values of the CKM matrix elements. We also show that the imaginary part of any rephasing invariant monomial is proportional to the Jarlskog’s invariant J or is 0.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Bound, virtual, and resonance S-matrix poles from the Schroedinger equation

A general method, which we call the potential S-matrix pole method, is developed for obtaining the S-matrix pole parameters for bound, virtual, and resonant states based on numerical solutions of the Schroedinger equation. This method is well known for bound states. In this work we generalize it for resonant and virtual states, although the corresponding solutions increase exponentially when r->infinity. Concrete calculations are performed for the 1{sup +} ground state of {sup 14}N, the resonance {sup 15}F states (1/2{sup +}, 5/2{sup +}), low-lying states of {sup 11}Be and {sup 11}N, and the subthreshold resonance in the proton-proton system. We also demonstrate that in the case of broad resonances, their energy and width can be found from the fitting the experimental phase shifts using the analytical expression for the elastic-scattering S matrix. We compare the S-matrix pole and the R matrix methods for broad resonances in the {sup 14}O-p and in {sup 26}Mg-n systems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Randomized Algorithms for Symmetric Nonnegative Matrix Factorization

Symmetric Nonnegative Matrix Factorization (SymNMF) is a technique in data analysis and machine learning that approximates a matrix with a product of a nonnegative, low-rank matrix and it transpose. To design faster and more scalable algorithms for SymNMF we develop two randomized algorithms for its computation. The first method uses randomized matrix sketching to compute an initial low-rank approximation to the input matrix and proceeds to uses this as a low-rank input to rapidly compute a SymNMF. The second methods uses randomized leverage score sampling to approximately solve constrained least squares problems. Many successful methods for SymNMF rely on (approximately) solving sequences of constrained least squares problems. Here, we prove theoretically that leverage score sampling can approximately solve constrained least squares problems to e-accuracy. Finally we demonstrate both methods work in practice by applying them to graph clustering tasks on large real world data sets. These experiments show that our methods approximately maintain solution quality and achieve significant speed ups for both large dense and large sparse problems.

97 MATHEMATICS AND COMPUTING↗

Precision test of gauge/gravity duality in D0-brane matrix model at low temperature

We test the gauge/gravity duality between the matrix model and type IIA string theory at low temperatures with unprecedented accuracy. To this end, we perform lattice Monte Carlo simulations of the Berenstein-Maldacena-Nastase (BMN) matrix model, which is the one-parameter deformation of the Banks-Fischler-Shenker-Susskind (BFSS) matrix model, taking both the large N and continuum limits. We leverage the fact that sufficiently small flux parameters in the BMN matrix model have a negligible impact on the energy of the system while stabilizing the flat directions so that simulations at smaller N than in the BFSS matrix model are possible. Hence, we can perform a precision measurement of the large N continuum energy at the lowest temperatures to date. The energy is in perfect agreement with supergravity predictions including estimations of α'-corrections from previous simulations. At the lowest temperature where we can simulate efficiently (T = 0.25λ 1/3 , where λ is the ’t Hooft coupling), the difference in energy to the pure supergravity prediction is less than 10%. Furthermore, we can extract the coefficient of the 1/N 4 corrections at a fixed temperature with good accuracy, which was previously unknown.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Grassmann matrix quantum mechanics

We explore quantum mechanical theories whose fundamental degrees of freedom are rectangular matrices with Grassmann valued matrix elements. We study particular models where the low energy sector can be described in terms of a bosonic Hermitian matrix quantum mechanics. We describe the classical curved phase space that emerges in the low energy sector. The phase space lives on a compact Kähler manifold parameterized by a complex matrix, of the type discovered some time ago by Berezin. The emergence of a semiclassical bosonic matrix quantum mechanics at low energies requires that the original Grassmann matrices be in the long rectangular limit. In conclusion, we discuss possible holographic interpretations of such matrix models which, by construction, are endowed with a finite dimensional Hilbert space.

1/N expansion↗

Confinement/deconfinement transition in the D0-brane matrix model — A signature of M-theory?

We study the confinement/deconfinement transition in the D0-brane matrix model (often called the BFSS matrix model) and its one-parameter deformation (the BMN matrix model) numerically by lattice Monte Carlo simulations. Our results confirm general expectations from the dual string/M-theory picture for strong coupling. In particular, we observe the confined phase in the BFSS matrix model, which is a nontrivial consequence of the M-theory picture. We suggest that these models provide us with an ideal framework to study the Schwarzschild black hole, M-theory, and furthermore, the parameter region of the phase transition between type IIA superstring theory and M-theory. A detailed study of M-theory via lattice Monte Carlo simulations of the D0-brane matrix model might be doable with much smaller computational resources than previously expected.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Complexes of dichlorosilylene with allyl chloride and allyl bromide: matrix IR spectroscopy and quantum chemical studies

Formation of donor-acceptor complexes between dichlorosilylene, SiCl{sub 2}, and allyl halides, AllHal(Hal= Cl, Br) was detected in Ar matrixes using matrix IR spectroscopy. In agreement with the predictions of the performed quantum chemical calculations, only broad unstructured absorption bands contributed by different conformers of the 1 : 1 complexes between SiCl{sub 2} and AllHal were observed in IR spectra of matrixes after deposition in the regions of characteristic vibrations of starting reactants. Annealing of matrixes resulted in strong narrowing the bands due to conversions of different conformers into the most stable structures. The predominantly formed conformers in both the reaction systems were those of complexes with SiCl{sub 2} coordinated to the Hal atoms of AllHal in the gauche conformations. At the same time, according to the calculations, the complexes with SiCl{sub 2} coordination to the double bonds of AllHal can be only slightly less stable than the complexes with coordination to the Hal atoms, and all these basic centers can be considered as comparable in their activity in the complexation. The only products revealed upon photolysis of complexes were the products of silylene insertion into the C–Hal bonds, viz., AllSiCl{sub 3} and AllSiCl{sub 2}Br. Theoretical study of thermal transformations in the SiCl{sub 2} + AllHal systems showed that formal insertion of SiCl{sub 2} in the C–Hal bonds and its addition to the double bonds of AllHal have low activation barriers of 3–8 kcal mol{sup –1}. However, these barriers are too high for these reactions to occur under the matrix isolation conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Perspective on Solid-State Additive Manufacturing of Aluminum Matrix Composites Using MELD

MELD, previously known as additive friction stir, is an emerging solid-state process that enables additive manufacturing of a broad range of metals and metal matrix composites. Here, we discuss its potential for fabricating aluminum matrix composites by showing examples of Al-SiC, Al 6061-Mo, and Al 6061-W composites. Thanks to its solid-state nature, MELD is uniquely suited for the use of high-strength aluminum alloys as matrix material, which would suffer from hot cracking problems in liquid-state processes. Using complementary characterization tools, we show that this process results in aluminum matrix composites with no observed porosity and homogeneous particle distribution. These properties stem from the extensive material flow and mixing during the deposition process. In addition to the high quality of produced composites, its ease of use, versatility of feed materials, and scalability all make MELD an attractive tool for additive manufacturing of aluminum matrix composites. We also discuss the limitations of MELD for composite fabrication, with issues related to maximum reinforcement loading, tool wear, and in-plane resolution. Finally, we compare the benefits and limitations of MELD with other composite fabrication processes such as powder bed fusion, friction stir processing, stir casting, and powder processing.

36 MATERIALS SCIENCE↗

Oxidation behaviors of matrix-grade graphite during water vapor ingress accidents for high temperature gas-cooled reactors

Water ingress into cores of high temperature gas-cooled reactors (HTGRs) can cause serious safety problems in graphitic components, especially for matrix graphite, which is more vulnerable than nuclear graphite. Here in this study, oxidation behaviors of a matrix-grade graphite, ARB-B1, were investigated under simulated water ingress accidental conditions. The oxidation tests were conducted in water vapor/helium mixed atmospheres at elevated temperatures up to 1200 °C. Oxidation rates and activation energy were evaluated by mass loss measurements. The activation energy was 121.5 kJ/mol in the considered temperature range, indicating only one oxidation regime-in-pore diffusion assisted by cracks. The cracks originated from the fabrication process, acting as penetration paths for the oxidant, played an important role in the oxidation behaviors. Ungraphitized binder oxidation occurred at all temperatures, while apparent oxidation of filler particles started from 1100 °C. Moreover, oxidation effects on compressive properties and hardness of the matrix graphite were discussed in terms of oxidized microstructures. This first detailed study on matrix graphite oxidation in water vapor provides important kinetics knowledge and microstructural and mechanical data for accidental scenarios of HTGRs as well as for development of new matrix graphite materials.

36 MATERIALS SCIENCE↗

Coarsening of nanoscale (Ti,Mo)C precipitates in different ferritic matrixes

Coarsening of nanoscale (Ti,Mo)C precipitates within quasi-polygonal ferritic (QPF) matrix and polygonal ferritic (PF) matrix is studied via HRTEM and In-situ heating TEM. Influenced by different nucleation processes, inverse coarsening process showing dissolution of large clustered precipitates and growth of small interphase precipitates is directly observed in the PF matrix. However, due to the evolution of high-density subboundaries, coarsening of precipitates in QPF matrix is mainly characterized by the subboundary migration assisted coarsening process, during which arch-like coarsened precipitates form after the sweeping of subboundaries. Analysis of atomic structure clarify that “imposts” of the arch-like coarsened precipitates are established by the re-precipitation of solute atoms from movable subboundary to the close packed planes {111} of (Ti,Mo)C precipitates, and that the “key stones” are constructed due to the change of re-precipitation planes to {200}. Geometric phase analysis (GPA) illustrates that not only the change of re-precipitation direction during the formation of arch-like precipitates, but also the selective coarsening of clustered precipitates in PF matrix, is caused by the highly anisotropic strain field around (Ti,Mo)C precipitates.

36 MATERIALS SCIENCE↗

Real-Time Monitoring of Gas-Phase and Dissolved CO 2 Using a Mixed-Matrix Composite Integrated Fiber Optic Sensor for Carbon Storage Application

Novel chemical sensors that improve detection and quantification of CO 2 are critical to ensuring safe and cost-effective monitoring of carbon storage sites. Fiber optic (FO) based chemical sensor systems are promising field-deployable systems for real-time monitoring of CO 2 in geological formations for long-range distributed sensing. Here, a mixed-matrix composite integrated FO sensor system was developed with a purely optical readout that reliably operates as a detector for gas-phase and dissolved CO 2 . A mixed-matrix composite sensor coating consisting of plasmonic nanocrystals and hydrophobic zeolite embedded in a polymer matrix was integrated on the FO sensor. The mixed-matrix composite FO sensor showed excellent reversibility/stability in a high humidity environment and sensitivity to gas-phase CO 2 over a large concentration range. This remarkable sensing performance was enabled by using plasmonic nanocrystals to significantly enhance the sensitivity and a hydrophobic zeolite to effectively mitigate interference from water vapor. The sensor exhibited the ability to sense CO 2 in the presence of other geologically relevant gases, which is of importance for applications in geological formations. A prototype FO sensor configuration which possesses a robust sensing capability for monitoring dissolved CO 2 in natural water was demonstrated. Reproducibility was confirmed over many cycles, both in a laboratory setting and in the field. More importantly, we demonstrated on-line monitoring capabilities with a wireless telemetry system, which transferred the data from the field to a website. The combination of outstanding CO 2 sensing properties and facile coating processability makes this mixed-matrix composite FO sensor a good candidate suitable for practical carbon storage applications.

54 ENVIRONMENTAL SCIENCES↗