Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “materials processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Effect of residual chips on the material removal process of the bulk metallic glass studied by in situ scratch testing inside the scanning electron microscope

Research on material removal mechanism is meaningful for precision and ultra-precision manufacturing. In this paper, a novel scratch device was proposed by integrating the parasitic motion principle linear actuator. The device has a compact structure and it can be installed on the stage of the scanning electron microscope (SEM) to carry out in situ scratch testing. Effect of residual chips on the material removal process of the bulk metallic glass (BMG) was studied by in situ scratch testing inside the SEM. The whole removal process of the BMG during the scratch was captured in real time. Formation and growth of lamellar chips on the rake face of the Cube-Corner indenter were observed dynamically. Experimental results indicate that when lots of chips are accumulated on the rake face of the indenter and obstruct forward flow of materials, materials will flow laterally and downward to find new location and direction for formation of new chips. Due to similar material removal processes, in situ scratch testing is potential to be a powerful research tool for studying material removal mechanism of single point diamond turning, single grit grinding, mechanical polishing and grating fabrication.

36 MATERIALS SCIENCE↗

Characterization of Covetic Materials for Process Control. Final CRADA report

GDC Industries LLC has been performing process research on covetic materials since its formation in February 2015. With assistance from DOE and the Air Force via SBIR projects, GDC focused on the enhancement of aluminum alloys to covetics to replicate a previously reported electrical conductivity of about 67% IACS (International Annealed Copper Standard). GDC has established a joint development agreement with General Cable Corporation, wherein General Cable agreed to perform numerous extrusions of as cast covetics and subsequent tensile and electrical conductivity tests on the resultant wire. Covetics conversion was proven but the significant improvement is yet to be replicated. To control the experiments towards enhanced process control, a series of designed experiments was created by an expert in process control from the automotive industry. Six process variables were identified and a designed experiment matrix requiring 18 independent conversions was created at GDC. The result of those designed experiments has now allowed GDC to focus on two process variables, namely, residence time and DC current in the conversions with the other four variable held constant. While this work is useful in replicating the earlier enhancements, GDC feels it will not be sufficient for the necessary process knowhow for scale up required by industry as GDC still does not have a direct correlation of the process variables to the actual carbon in the finished covetics. Since 2015, GDC has been aware of the capabilities existing at Argonne National Laboratory for performing carbon analysis that exceeds the precision commonly available to Industry. GDC and ANL submitted a proposal in response to the DOE-EERE – Small Business Vouchers Pliot Program announcement and the proposal was selected for funding. GDC will melt-process covetic aluminum samples following their design of experiment criteria and have the as-casted samples extruded by their partner, General Cable. Argonne will measure the conductivity, analyze carbon content, perform X-ray diffraction, and examine the microstructural features of the samples. Careful process variable measurements will be recorded by each party such that correlations can be developed indicating process parameters that yield the best carbon concentration in covetics.

36 MATERIALS SCIENCE↗

NASA / NIST / FAA Technical Interchange Meeting on Computational Materials Approaches for Qualification by Analysis for Aerospace Applications

This report documents the goals, organization and outcomes of a Technical Interchange Meeting (TIM) on Computational Materials Approaches for Qualification by Analysis, co-organized by NASA, NIST and the FAA. The TIM was held at NASA Langley Research Center on January 15-16, 2020. Approximately 60 subject matter experts (SMEs) representing 8 aerospace manufacturers, 7 government organizations and 2 universities participated. Expertise of the SMEs spanned the Technology Readiness Level (TRL) scale from the low-to-mid TRL focus of government laboratories and universities to the high TRL perspective of the regulatory organizations and aerospace manufacturers. During this TIM, the future needs of the government regulators and manufacturers motivated the overall discussion and framed the input given by the participants. Hence, the key objectives of the TIM were to understand existing gaps in model-based, e.g., computational materials, processing and performance predictions for aerospace materials and components and forecast how they can be matured to support material, process and part-level qualification and certification (Q&C). The TIM focused on process-intensive metallic materials technologies, including, but not limited to, additive manufacturing. Participation was roughly evenly divided among the processing and performance tracks, suggesting that both topic areas are generally perceived as being both valuable and requiring additional investment. The output of this TIM may be used by both participating and other organizations, in part, as guidance for future national efforts on maturing computational materials capabilities for use in the Q&C of advanced metallic material systems in aerospace applications.

Edward H Glaessgen↗

Research and competition: Best partners

NASA's Microgravity Science and Applications Program is directed toward research in the science and technology of processing materials under conditions of low gravity. The objective is to make a detailed examination of the constraints imposed by gravitational forces on Earth. The program is expected to lead ultimately to the development of new materials and processes in Earth-based commercial applications, adding to this nation's technological base. An important resource that U.S. researchers have readily available to them is the new Microgravity Materials Science Laboratory (MMSL) at NASA Lewis Research Center in Cleveland. A typical scenario for a microgravity materials experiment at Lewis would begin by establishing 1-g baseline data in the MMSL and then proceeding, if it is indicated, to a drop tower or to simulated microgravity conditions in a research aircraft to qualify the project for space flight. A major component of Lewis microgravity materials research work involves the study of metal and alloy solidification fundamentals.

Shaw, J. M.↗

Sound Speed as a Candidate for Internal Temperature Monitoring During Solid Phase Processing of Materials

Internal temperature is an important parameter for understanding the solid phase processing (SPP) of materials and improving feedback control of these processes. Friction stir processes, shear assisted processing and extrusion (ShAPE ™ ), and ultrahigh velocity (UHV) cold spray are examples of such processes. Simple thermal models based on temperatures measured at the boundary of the deforming body cannot capture the dynamic nature of temperature generation within the deforming solid. One possibly way of understanding internal temperature is by measuring sound speed, which varies as a function of temperature for materials and directing ultrasonic wave propagation through selected material volumes of interest. In this project, longitudinal wave speed is estimated for aluminum 6061. Piezoelectric materials bonded to a specimen provided data from which longitudinal wave speed was estimated. A discussion evaluated the linear relationship of wave speed versus temperature and postulated how wave speed measurements could be used to estimate the internal temperature of selected material volumes for feedback during SPP of materials. Instrumentation, data and analysis, and a discussion are reviewed.

36 MATERIALS SCIENCE↗

Spacelab science

The Spacelab/Shuttle system will offer a new capability for investigating the earth's environment, solar-terrestrial relationships, and the physics of the solar system and beyond. Many Spacelab science and applications programs have been identified for the 1980s. These include the Solar Optical Telescope, the Chemical Release Module, a variety of materials processing facilities, the Atmospheric Cloud Physics Laboratory, and the Spacelab Infrared Telescope Facility. Experiments carried out by these payloads will range from passive observation of remote astronomical sources to in situ active probing of the earth's atmosphere and magnetosphere to the examination of the processing of materials in space.

Chappell, C. R.↗

Advanced Materials Technology

Composites, polymer science, metallic materials (aluminum, titanium, and superalloys), materials processing technology, materials durability in the aerospace environment, ceramics, fatigue and fracture mechanics, tribology, and nondestructive evaluation (NDE) are discussed. Research and development activities are introduced to the nonaerospace industry. In order to provide a convenient means to help transfer aerospace technology to the commercial mainstream in a systematic manner.

Charles P. Blankenship↗

Preparation for microgravity: The role of the microgravity materials science laboratory

A laboratory dedicated to ground based materials processing in preparation for space flight was established at the NASA Lewis Research Center. Experiments are performed to delineate the effects of gravity on processes of both scientific and commercial interest. Processes are modeled physically and mathematically. Transport model systems are used where possible to visually track convection, settling, crystal growth, phase separation, agglomeration, vapor transport, diffusive flow, and polymers reactions. The laboratory contains apparatus which functionally duplicates apparatus available for flight experiments and other pieces instrumented specifically to allow process characterization. Materials addressed include metals, alloys, salts, glasses, ceramics, and polymers. The Microgravity Materials Science Laboratory is staffed by engineers and technicians from a variety of disciplines and is open to users from industry and academia as well as the government. Examples will be given of the laboratory apparatus typical experiments and results.

Johnston, J. Christopher↗

Advantages of barium peroxide in the powder synthesis of perovskite superconductors

This paper compares reaction chemistry, material processing, and material characteristics for the solid state reaction using BaCO3 or BaO2 in the synthesis of perovskite superconductors. Results are presented for weight loss and X-ray diffraction, sample morphology and homogeneity as monitored by SEM and EDS, and the superconductivity critical temperature and ac susceptibility. Greater mass density, increased sample homogeneity, lower resistance, and improved reproducibility for material are found when BaO32 is used.

Hepp, A. F.↗

Some considerations for various positioning systems and their science capabilities

Containerless processing of materials at elevated temperatures is discussed with emphasis on high temperature chemistry, thermophysical properties, materials science, and materials processing. Acoustic and electromagnetic positioning of high temperature melts are discussed. Results from recent ground based experiments, including KC-135 testing of an acoustic levitator, are presented. Some current positioning technologies and the potential for enhancing them are considered. Further, a summary of these technologies and their science capabilities for the development of future experiments is given.

Rey, Charles A.↗

Crystal Growth Furnace - An overview of the system configuration and planned experiments on the first United States Microgravity Laboratory mission

Attention is given to the Crystal Growth Furnace (CGF) currently in the Level IV integration cycle at the Kennedy Space Center in preparation for its maiden flight on the first United States Microgravity Laboratory (USML-1) mission to be launched in May 1992. CGF was developed for NASA under the Microgravity Science and Application division programs at NASA Headquarters. An overview of the CGF system and the system configuration for the USML-1 mission are presented, and the planned on-orbit experiments are described. The four important scientific experiments selected from industry and educational institutions for the CGF USML-1 mission will enable a better understanding of the complex phenomena inherent in materials processing that will lead to the ultimate improvement of both processes and materials. Crystal growth by chemical vapor transport has resulted in improved growth conditions with crystal morphology, lower defect densities, and higher growth rates than terrestrially observed.

Srinivas, R.↗

Affordable Design: A Methodolgy to Implement Process-Based Manufacturing Cost into the Traditional Performance-Focused Multidisciplinary Design Optimization

The primary objective of this paper is to demonstrate the use of process-based manufacturing and assembly cost models in a traditional performance-focused multidisciplinary design and optimization process. The use of automated cost-performance analysis is an enabling technology that could bring realistic processbased manufacturing and assembly cost into multidisciplinary design and optimization. In this paper, we present a new methodology for incorporating process costing into a standard multidisciplinary design optimization process. Material, manufacturing processes, and assembly processes costs then could be used as the objective function for the optimization method. A case study involving forty-six different configurations of a simple wing is presented, indicating that a design based on performance criteria alone may not necessarily be the most affordable as far as manufacturing and assembly cost is concerned.

Bao, Han P.↗

Vibration Method for Tracking the Resonant Mode and Impedance of a Microwave Cavity

There has been a concerted effort to improve the microwave heating technique for processing materials at high temperature. Improved optimization of the energy transfer from a microwave source to the material being processed is required. A vibration technique is pre- sented to continuously maintain a mode resonance and impedance match between a constant frequency magnetron source and a resonant cavity.

microwave↗

Recent progress and perspective in solution-processed Interfacial materials for efficient and stable polymer and organometal perovskite solar cells

Here in this review, we summarize the latest developments in solution-processed interfacial layers that have contributed to the significantly improved performance of polymer and perovskite solar cells (PSCs and PVSCs). We discuss the solution-processed interfacial materials, including organic electrolytes, organic–inorganic hybrids, graphene oxides (GOs), transition metal oxides (TMOs), and self-assembled functional materials, along with their integration into efficient PSCs, polymer tandem cells (PTCs), and the emerging perovskite solar cells (PVSCs). Regarding the rapid progress of PSCs and PVSCs, strategies and perspectives of further improving solution-processed interfacial materials are also discussed to help readers understand the challenges and opportunities in transitioning from scientific curiosity into technology translation for realizing low-cost, printable, and high-efficiency flexible solar cells to address the scalability issues facing solar energy.

14 SOLAR ENERGY↗