Application of unilateral and graph techniques to analysis of linear circuits.
Algorithms for linear system of first order differential equations, emphasizing equations associated with computer oriented circuit design
Mcnamee, L. P.↗
SEARCH · Engineering Papers
Results for “linear equation systems”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Evaluation of routines for numerical solution of the matrix equation AX + XA sup T + B = 0
Evaluation of routines for numerical solution of matrix equation for time-invariant linear systems
Dowling, P. R.↗
Fixed interval smoothing with discrete measurements.
Smoothing equations for a linear continuous dynamic system with linear discrete measurements, derived from the discrete results of Rauch, Tung, and Striebel (1965), (R-T-S), are used to extend, through recursive updating, the previously published results of Bryson and Frazier (1963), (B-F), and yield a modified Bryson and Frazier, (M-B-F), algorithm. A comparison of the (M-B-F) and (R-T-S) algorithms leads to the conclusion that the former is to be preferred because it entails less computation, less storage, and less instability. It is felt that the presented (M-B-F) smoothing algorithm is a practical mechanization and should be of value in smoothing discretely observed dynamic linear systems.
Bierman, G. J.↗
Development of communications analysis techniques
Major results from the frequency analysis of system program (FASP) are reported. The FASP procedure was designed to analyze or design linear dynamic systems, but can be used to solve any problem that can be described by a system of linear time invariant differential equations. The program also shows plots of performance changes as design parameters are adjusted. Experimental results on narrowband FM distortion are also reported.
Shelton, R. D.↗
A generalized-capacity-matrix technique for computing aerodynamic flows
A numerical generalized-capacity-matrix technique is developed for application to aerodynamic flow computations. This technique allows the very fast direct (noniterative) numerical elliptic solvers to be used in problems with arbitrary internal boundaries and with a wide class of boundary conditions, including numerical application of the Kutta condition on an airfoil without iteration. Accuracy, speed, and usefulness of the technique are demonstrated with linear problems for potential flows over airfoil shapes. The method's main advantages, however, can be exploited within iterative procedures for a variety of complex flow problems governed by systems of equations not necessarily elliptic or linear.
Martin, E. D.↗
Application of singular value decomposition to structural dynamics systems with constraints
Singular value decomposition is used to construct a coordinate transformation for a linear dynamic system subject to linear, homogeneous constraint equations. The method is compared with two commonly used methods, namely classical Gaussian elimination and Walton-Steeves approach. Although the classical method requires fewer numerical operations, the singular value decomposition method is more accurate and convenient in eliminating the dependent coordinates. Numerical examples are presented to demonstrate the application of the method.
Juang, J.-N.↗
Stability of limit cycles in frictionally damped and aerodynamically unstable rotor stages
This paper deals with the stability of limit cycles (Steady-State Oscillations) associated with the multi-degree-of-freedom model of a frictionally damped and aerodynamically unstable rotor stage. By using the first order averaging technique, a generalized criterion has been established to sort out those unstable limit cycles which govern the maximum transient amplitude beyond which the rotor stage becomes unstable.The stability of the remaining steady-state solutions is analyzed by linearizing the averaged system of differential equations. Numerical results are discussed for three-, four- and five-bladed disks.
Sinha, A.↗
Symmetry and stability in Taylor-Couette flow
The flow of a fluid between concentric rotating cylinders (the Taylor problem) is studied by exploiting the symmetries of the system. The Navier-Stokes equations, linearized about Couette flow, possess two zero and four purely imaginary eigenvalues at a suitable value of the speed of rotation of the outer cylinder. There is thus a reduced bifurcation equation on a six-dimensonal space which can be shown to commute with an action of the symmetry group 0(2) x S0(2). The group structure is used to analyze this bifurcation equation in the simplest (nondegenerate) case, and to compute the stabilities of solutions. In particular, when the outer cylinder is counterrotated, transitions which seem to agree with recent experiments of Andereck, Liu, and Swinney (1984) are obtained. It is also possible to obtain the 'main sequence' in this model. This sequence is normally observed in experiments when the outer cylinder is held fixed.
Golubitsky, M.↗
Field quantization and squeezed states generation in resonators with time-dependent parameters
The problem of electromagnetic field quantization is usually considered in textbooks under the assumption that the field occupies some empty box. The case when a nonuniform time-dependent dielectric medium is confined in some space region with time-dependent boundaries is studied. The basis of the subsequent consideration is the system of Maxwell's equations in linear passive time-dependent dielectric and magnetic medium without sources.
Dodonov, V. V.↗
Application of optical distributed sensing and computation to control of large space structures
A real time holographic sensing technique is introduced and its advantages are investigated from the filtering and control point of view. A feature of holographic sensing is its capability to make distributed measurements of the position and velocity of moving objects, such as a vibrating flexible space structure. This work is based upon the distributed parameter models of linear time invariant systems, particularly including the linear oscillator equations describing the vibration of large flexible space structures. The general conclusion is that application of optical distributed sensors bring gains in the situation where Kalman filtering is necessary for state estimation. In this case, both steady state and transient filtering error covariance become smaller. This in turn results in smaller cost in the LQG problem.
Balakrishnan, A. V.↗
Stability of a class of interconnected evolution systems
Stability conditions for a class of interconnected systems modeled by linear abstract evolution equations and a memoryless nonlinearity are derived. These conditions are stated in terms of the passivity of each of the subsystems and can be considered as a partial generalization of the hyperstability theorem. A Liapunov function approach is used in the proof without requiring the positive definiteness of the Liapunov function. Application to the robustness analysis of the infinite-dimensional linear quadratic regulator is also discussed.
Wen, John T.↗
Euler solutions for blunt bodies using triangular meshes - Artificial viscosity forms and numerical boundary conditions
A finite volume method is used to calculate compressible inviscid flows over blunt bodies using, in general, unstructured grids. Artificial viscosity forms are derived based on a simplified least squares procedure. The extra second order terms are consistent with the governing equations, hence a systematic treatment of the numerical boundary conditions can be easily implemented. A special treatment of blunt bodies may be required. The discrete equations are linearized and the resulting system is solved by a relaxation method. Preliminary results indicate that the effect of the numerical dissipation is minimal. For subsonic flows over smooth bodies, the solution is practically vorticity-free and the total pressure loss is of the same order as the truncation error. Finally, some extensions of the present method are briefly discussed.
Winterstein, R.↗
Dynamic analysis of Space Shuttle/RMS configuration using continuum approach
The initial assembly of Space Station Freedom involves the Space Shuttle, its Remote Manipulation System (RMS) and the evolving Space Station Freedom. The dynamics of this coupled system involves both the structural and the control system dynamics of each of these components. The modeling and analysis of such an assembly is made even more formidable by kinematic and joint nonlinearities. The current practice of modeling such flexible structures is to use finite element modeling in which the mass and interior dynamics is ignored between thousands of nodes, for each major component. The model characteristics of only tens of modes are kept out of thousands which are calculated. The components are then connected by approximating the boundary conditions and inserting the control system dynamics. In this paper continuum models are used instead of finite element models because of the improved accuracy, reduced number of model parameters, the avoidance of model order reduction, and the ability to represent the structural and control system dynamics in the same system of equations. Dynamic analysis of linear versions of the model is performed and compared with finite element model results. Additionally, the transfer matrix to continuum modeling is presented.
Ramakrishnan, Jayant↗
Preliminary Planar Formation: Flight Dynamics Near Sun-Earth L2 Point
NASA's Goddard Space Flight Center is planning a series of missions in the vicinity of the Sun-Earth L2 libration point. Some of these projects will involve a distributed space system of telescope spacecraft acting together as a single telescope for high-resolution. The individual telescopes will be configured in a plane, surrounding a hub, where the telescope plane can be aimed toward various astronomical targets of interest. In preparation for these missions, it is necessary to develop an improved understanding of the dynamical behavior of objects in a planar configuration near L2. The classical circular restricted three body problem is taken as the basis for the analysis. At first order, the motion of such a telescope relative to the hub is described by a system of linear second order differential equations. These equations are identical to the circular restricted problem's linear equations describing the hub motion about L2. Therefore, the fundamental frequencies, both parallel to and normal to the ecliptic plane, are the same for the relative telescope motion as for the hub motion. To maintain the telescope plane for the duration necessary for the planned observations, a halo-type orbit of the telescopes about the hub is investigated. By using a halo orbit, the individual telescopes remain in approximately the same plane over the observation duration. For such an orbit, the fundamental periods parallel to and normal to the ecliptic plane are forced to be the same by careful selection of the initial conditions in order to adjust the higher order forces. The relative amplitudes of the resulting oscillations are associated with the orientation of the telescope plane relative to the ecliptic. As in the circular restricted problem, initial conditions for the linearized equations must be selected so as not to excite the convergent or divergent linear modes. In a higher order analysis, the telescope relative motion equations include the effects of the position of the hub relative to L2. In this paper, the differential equations are developed through second order in the distance of the hub from the libration point. A modified Lindstedt-Poincad perturbation method is employed to construct the solution of these differential equations through that same order of magnitude. In the course of the solution process, relationships are determined between the initial conditions of the telescopes, selected in order to avoid resonance excitation. As the differential equations include the hub position, it is necessary to simultaneously develop the solution for the hub. As has been done in past analyses of the circular restricted problem, the hub position is written in a power series formulation in terms of its distance from L2. Then, in order to be included in the telescope equations, the hub solution is cast in terms of the nonlinear frequency of the relative telescope motion. In the course of the analysis, it is determined that the hub should also maintain a halo orbit - about L2. Additionally, relationships are formed between the initial conditions of the telescopes and the hub. These relationships may be used to associate sets of initial conditions with particular orientations of the telescope plane. The accuracy of the analytical solution is verified through various simulations and comparison to numerical integration of the differential equations. The results of the simulations are presented, along with a graphical representation of the relationships between the initial conditions of the telescopes and hub.
Segerman, Alan M.↗
A least-squares finite element method for 3D incompressible Navier-Stokes equations
The least-squares finite element method (LSFEM) based on the velocity-pressure-vorticity formulation is applied to three-dimensional steady incompressible Navier-Stokes problems. This method can accommodate equal-order interpolations, and results in symmetric, positive definite algebraic system. An additional compatibility equation, i.e., the divergence of vorticity vector should be zero, is included to make the first-order system elliptic. The Newton's method is employed to linearize the partial differential equations, the LSFEM is used to obtain discretized equations, and the system of algebraic equations is solved using the Jacobi preconditioned conjugate gradient method which avoids formation of either element or global matrices (matrix-free) to achieve high efficiency. The flow in a half of 3D cubic cavity is calculated at Re = 100, 400, and 1,000 with 50 x 52 x 25 trilinear elements. The Taylor-Gortler-like vortices are observed at Re = 1,000.
Jiang, Bo-Nan↗
Identification and stochastic control of helicopter dynamic modes
A general treatment of parameter identification and stochastic control for use on helicopter dynamic systems is presented. Rotor dynamic models, including specific applications to rotor blade flapping and the helicopter ground resonance problem are emphasized. Dynamic systems which are governed by periodic coefficients as well as constant coefficient models are addressed. The dynamic systems are modeled by linear state variable equations which are used in the identification and stochastic control formulation. The pure identification problem as well as the stochastic control problem which includes combined identification and control for dynamic systems is addressed. The stochastic control problem includes the effect of parameter uncertainty on the solution and the concept of learning and how this is affected by the control's duel effect. The identification formulation requires algorithms suitable for on line use and thus recursive identification algorithms are considered. The applications presented use the recursive extended kalman filter for parameter identification which has excellent convergence for systems without process noise.
Molusis, J. A.↗
Recursive linearization of multibody dynamics equations of motion
The equations of motion of a multibody system are nonlinear in nature, and thus pose a difficult problem in linear control design. One approach is to have a first-order approximation through the numerical perturbations at a given configuration, and to design a control law based on the linearized model. Here, a linearized model is generated analytically by following the footsteps of the recursive derivation of the equations of motion. The equations of motion are first written in a Newton-Euler form, which is systematic and easy to construct; then, they are transformed into a relative coordinate representation, which is more efficient in computation. A new computational method for linearization is obtained by applying a series of first-order analytical approximations to the recursive kinematic relationships. The method has proved to be computationally more efficient because of its recursive nature. It has also turned out to be more accurate because of the fact that analytical perturbation circumvents numerical differentiation and other associated numerical operations that may accumulate computational error, thus requiring only analytical operations of matrices and vectors. The power of the proposed linearization algorithm is demonstrated, in comparison to a numerical perturbation method, with a two-link manipulator and a seven degrees of freedom robotic manipulator. Its application to control design is also demonstrated.
Lin, Tsung-Chieh↗
Variation in efficiency of parallel algorithms
The present study has the objective to investigate some iterative parallel-processor linear equation solving algorithms with respect to efficiency for analyses of typical linear engineering systems. Attention is given to a set of n linear equations, Ku = p, where K = an n x n positive definite, sparsely populated, symmetric matrix, u = an n x 1 vector of unknown responses, and p = an n x 1 vector of prescribed constants. This study is concerned with a hybrid method in which iteration is used to solve the problem, while a direct method is used on the local processor level. Variations in the efficiency of parallel algorithms are explored. Measures of the efficiency are based on computer experiments regarding the algorithms. For all the algorithms, the wall clock time is found to decrease as the number of processors increases.
Hayashi, A.↗