SEARCH · Engineering Papers

Results for “light modulated”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Tailoring Crosslinks through Time─A Paradigm for Tough Hydrogels

The multidisciplinary applications of hydrogels have motivated a thorough exploration of the relationship between their structural and mechanical properties, i.e., spatial structure–function relationships, with particular regard to strength and toughness. While this approach has driven fundamental advancements in the design of robust hydrogel structures, further complementary perspectives are needed to enable holistic, rational design schemes that integrate considerations such as fabrication and advanced functions like response and adaptation. To these ends, this review focuses on the dynamics of temporal-function relationships and their fundamental bases in order to highlight how the dynamic regulation of polymer interactions programs: 1) polymer assembly and material structure; 2) response to deformation and fracture behavior; 3) dynamic modulation of properties and structural remodeling/self-healing. Here, by exploring this intersection of hydrogel formation, function, and remodeling, this review seeks to shed light on the fundamental relationship between molecular structure, material assembly, and performance in order to connect the emerging area of bioinspired materials processing with tough hydrogel design, and further provides a lasting inspiration and impetus for future hydrogel development that enables valuable scientific and technological advancements.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Opto-twistronic Hall effect in a three-dimensional spiral lattice

Studies of moire systems have elucidated the exquisite effect of quantum geometry on the electronic bands and their properties, leading to the discovery of new correlated phases. However, most experimental studies have been confined to a few layers in the 2D limit. The extension of twistronics to its 3D limit, where the twist is extended into the third dimension between adjacent layers, remains underexplored due to the challenges in precisely stacking layers. Here, in this study, we focus on 3D twistronics on a platform of self-assembled spiral superlattice of multilayered WS 2 . Our findings reveal an opto-twistronic Hall effect in the spiral superlattice. This mesoscopic response is an experimental manifestation of the noncommutative geometry that arises when translational symmetry is replaced by a non-symmorphic screw operation. We also discover signatures of altered laws of optical excitation, manifested as an unconventional photon momentum-lattice interaction owing to moire of moire modulations in the 3D twistronic system. Crucially, our findings mark the initial identification of higher-order quantum geometrical tensors in light-matter interactions. This breakthrough opens new avenues for designing quantum materials-based optical lattices with large nonlinearities, paving the way for the development of advanced quantum nanophotonic devices.

Ji, Zhurun↗

DOE OSTI2020

Multicube retroreflector and retroreflector-based communication system

A “multicube” retroreflector may include “nested” corner cubes. Such a design combines the ease of fabrication of conventional corner cubes (e.g., stamping from a sheet) and the ability to easily and densely package them with a greater range of angles over which light will be reflected back towards the source. Such multicube retroreflectors may reflect 50% more light than corner cube retroreflectors. A retroreflector, or an array of retroreflectors, may be used as part of a communication system. A modulated retroreflector or an array thereof can form the basis of a unique communication system. For instance, by using a modulated retroreflector, or an array of such retroreflectors, a host system (e.g., an aircraft) can receive data from a remote system (e.g., a drone, an air-dropped sensor package, etc.) in a way that is difficult to intercept, and minimizes the power, computation, and antenna pointing requirements for the remote system.

42 ENGINEERING↗

DOE OSTI2020

Method and apparatus of surface-incident, plasmon-enhanced multiple quantum well modulators and optical coupling thereon

An optical interconnect system has first and second waveguides each with wedge-shaped cross-section at a first end, disposed over an optical modulator. The optical modulator is a surface-plasmon multi quantum well (SP-MQW) modulator, the first waveguide an input waveguide and the second waveguide configured an output waveguide. In embodiments the SP-MQW modulator has multiple semiconductor layers disposed atop a lower metal layer between 10 and 300 nanometers thick and configured such that incident light is reflected at the lower metal layer unless a voltage is applied to the semiconductor layers, when incident light is coupled into a surface plasmon mode in the lower metal layer.

42 ENGINEERING↗

DOE OSTI2024

Alteration of phycobilisome excitation energy transfer properties in response to attenuations in peripheral electron flow

In Synechocystis sp. PCC 6803 ( S . 6803), two types of phycobilisome (PBS) complexes, CpcG-PBS and CpcL-PBS, function to harvest light energy for photosynthetic reaction centers (RCs), photosystem I (PSI) and photosystem II (PSII). The compositional differences between these two forms of PBS and their specificity for RCs have led to suggestions that they may differ in function. To address this question, we examined how PBS-RC interactions, and the transfer of excitation energy from PBS to RCs, might be adjusted under conditions where electron demand and photon availability are modulated. The CpcG-PBS, CpcL-PBS, and RC complexes were isolated from a S . 6803 strain defective in expression of flavodiiron 1 (oxygen reduction reaction 1, ORR1) grown under varied light regimes. The energy transfer preference from CpcL-PBS to either PSI or PSII was investigated by in vitro crosslinking and 77 K fluorescence emission spectroscopy to assess energy transfer efficiency under photoexcitation. While the results demonstrate that the transfer of excitation energy from CpcL-PBS favors PSI over PSII in WT strains as previously shown, the preference of CpcL-PBS switches from PSI to PSII in ORR1 strains. Surprisingly, this change in preference was reproduced when ORR1 CpcL-PBS was crosslinked with WT RCs, or when WT CpcL-PBS was cross-crosslinked with ORR1 RCs, indicating there are physical modifications to both PBS and RCs that mediate the preference switch. In contrast, the analysis with ORR1 CpcG-PBS shows similar preferences to WT. Additionally, PBS populations in ORR1 shifted to a greater proportion of CpcL-PBS relative to CpcG-PBS. These results demonstrate that under conditions where electron utilization changes, there is a tuning of the excitation energy allocation from CpcL-PBS to RCs to manage the energy distribution for photosynthesis under dynamic flux conditions.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

PyZebrascope: An Open-Source Platform for Brain-Wide Neural Activity Imaging in Zebrafish

Understanding how neurons interact across the brain to control animal behaviors is one of the central goals in neuroscience. Recent developments in fluorescent microscopy and genetically-encoded calcium indicators led to the establishment of whole-brain imaging methods in zebrafish, which record neural activity across a brain-wide volume with single-cell resolution. Pioneering studies of whole-brain imaging used custom light-sheet microscopes, and their operation relied on commercially developed and maintained software not available globally. Hence it has been challenging to disseminate and develop the technology in the research community. Here, we present PyZebrascope, an open-source Python platform designed for neural activity imaging in zebrafish using light-sheet microscopy. PyZebrascope has intuitive user interfaces and supports essential features for whole-brain imaging, such as two orthogonal excitation beams and eye damage prevention. Its camera module can handle image data throughput of up to 800 MB/s from camera acquisition to file writing while maintaining stable CPU and memory usage. Its modular architecture allows the inclusion of advanced algorithms for microscope control and image processing. As a proof of concept, we implemented a novel automatic algorithm for maximizing the image resolution in the brain by precisely aligning the excitation beams to the image focal plane. PyZebrascope enables whole-brain neural activity imaging in fish behaving in a virtual reality environment. Thus, PyZebrascope will help disseminate and develop light-sheet microscopy techniques in the neuroscience community and advance our understanding of whole-brain neural dynamics during animal behaviors.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Controllable X-ray Pulse Trains from Enhanced Self-Amplified Spontaneous Emission

We report the demonstration of optical compression of an electron beam and the production of controllable trains of femtosecond, soft x-ray pulses with the Linac Coherent Light Source (LCLS) freeelectron laser (FEL). This is achieved by enhanced self-amplified spontaneous emission with a 2 μm laser and a dechirper device. Optical compression was achieved by modulating the energy of an electron beam with the laser and then compressing with a chicane, resulting in high current spikes on the beam which we observe to lase. A dechirper was then used to selectively control the lasing region of the electron beam. Field autocorrelation measurements indicate a train of pulses, and we find that the number of pulses within the train can be controlled (from 1 to 5 pulses) by varying the dechirper position and undulator taper. These results are a step toward attosecond spectroscopy with x-ray FELs as well as future FEL schemes relying on optical compression of an electron beam.

Duris, Joseph P↗

DOE OSTI2022

Spatiotemporal sampling of near-petahertz vortex fields

Measuring the field of visible light with high spatial resolution has been challenging, as many established methods only detect a focus-averaged signal. Here, we introduce a near-field method for optical field sampling that overcomes that limitation by employing the localization of the enhanced near-field of a nanometric needle tip. A probe field perturbs the photoemission from the tip, which is induced by a pump pulse, generating a field-dependent current modulation that can easily be captured with our electronic detection scheme. The approach provides reliable characterization of near-petahertz fields. We show that not only the spiral wavefront of visible femtosecond light pulses carrying orbital angular momentum (OAM) can be resolved but also the field evolution with time in the focal plane. Additionally, our method is polarization sensitive, which makes it applicable to vectorial field reconstruction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2025

Modulation of the Electronic and Vibrational Landscape in Lead Organic Chalcogenides

Metal organic chalcogenides (MOCs) are an emerging class of two-dimensional (2D) materials featuring tunable band gaps and strong light-matter interactions with great potential for optical and polaritonic applications. Lead organic chalcogenides (LOCs) stand out among MOCs for sustaining long-lived coherent optical phonons despite their distorted lattices. However, the strong electron–phonon coupling also leads to rapid charge carrier self-trapping, hindering carrier transport. Herein, we demonstrate that charge carrier self-trapping is suppressed in Se- and Te-based LOCs. Specifically, the expansive Se and Te orbitals give rise to more dispersive conduction bands and reduced electron effective masses, thereby mitigating carrier self-trapping. As a result of reduced carrier self-trapping, the Se- and Te-based LOCs exhibit enhanced band-to-band photoluminescence and improved charge transport performance. Furthermore, our results provide a synthetic route to Se- and Te-based LOC single crystals and demonstrate the potential of orbital engineering to tune their electronic and phononic properties.

Chalcogenides↗

DOE OSTI2023

Near-MHz temperature and H 2 O measurements in post-detonation fireballs of 25 g hemispherical explosives using scanned-wavelength-modulation spectroscopy

A laser absorption spectroscopy diagnostic integrated within a hardened optical probe was used to measure temperature and water mole fraction at 500 kHz in post-detonation fireballs of explosives. In the experiments, an exploding-bridgewire detonator initiated a 25 g hemisphere of explosive (N5 or PETN). This produced a hemispherical fireball that traveled radially towards a hardened measurement probe. The probe contained a pressure transducer and optical equipment to pitch fiber-coupled laser light across a 12.6 cm gap onto a detector. Tunable diode lasers emitting near 7185.6 and 6806 c m − <#comment/> 1 were used to measure the absorbance spectrum of H 2 O utilizing peak-picking scanned-wavelength-modulation spectroscopy with a scan frequency of 500 kHz and modulation frequencies of 35 and 45.5 MHz, respectively. This enabled measurements of temperature and X H 2 O in the shock-heated air and trailing fireball at 500 kHz. Time histories of pressure, temperature, and H 2 O mole fraction were acquired at different standoff distances to quantify how the fireball evolved in space and time as well as to compare measured quantities between PETN and N5 fireballs. The standard deviation of temperature and X H 2 O during one representative test were found to be 17 K (1.3%) and 0.011 (5%), respectively. These measurements demonstrate this diagnostic’s ability to provide rapid and reliable measurements in harsh, highly transient post-detonation environments produced by solid explosives.

Schwartz, Charles J.↗

DOE OSTI2021

Influence of Fuel Properties on Gasoline Direct Injection Particulate Matter Emissions Over First 200 s of World-Harmonized Light-Duty Test Procedure Using an Engine Dynamometer and Novel “Virtual Drivetrain” Software

Abstract The influence of fuel properties on particulate matter (PM) emissions from a catalytic gasoline particulate filter (GPF) equipped gasoline direct injection (GDI) engine was investigated using novel “virtual drivetrain” software and an engine mated to an engine dynamometer. The virtual drivetrain software was developed in labview to operate the engine on an engine dynamometer as if it were in a vehicle undergoing a driving cycle. The software uses a physics-based approach to determine vehicle acceleration and speed based on engine load and a programed “shift” schedule to control engine speed. The software uses a control algorithm to modulate engine load and braking to match a calculated vehicle speed with the prescribed speed trace of the driving cycle of choice. The first 200 s of the World-harmonized Light-duty Test Procedure (WLTP) driving cycle was tested using six different fuel formulations of varying volatility, aromaticity, and ethanol concentration. The first 200 s of the WLTP was chosen as the test condition because it is the most problematic section of the driving cycle for controlling PM emissions due to the cold start and cold drive off. It was found that there was a strong correlation between aromaticity of the fuel and the engine-out PM emissions, with the highest emitting fuel producing more than double the mass emissions of the low PM production fuel. However, the post-GPF PM emissions depended greatly on the soot loading state of the GPF. The fuel with the highest engine-out PM emissions produced comparable post-GPF emissions to the lowest PM producing fuel over the driving cycle when the GPF was loaded over three cycles with the respective fuels. These results demonstrate the importance of GPF loading state when aftertreatment systems are used for PM reduction. It also shows that GPF control may be more important than fuel properties, and that regulatory compliance for PM can be achieved with proper GPF control calibration irrespective of fuel type.

Energy & Fuels↗

DOE OSTI2021

NF-κB Blockade by NEMO Binding Domain Peptide Ameliorates Inflammation and Neurobehavioral Sequelae After Cranial Radiation Therapy in Juvenile Mice

Cranial radiation therapy (CRT) is a common treatment for pediatric brain tumor patients. However, side effects include significant neurobehavioral dysfunction in survivors. This dysfunction may in part be caused by inflammation, including increased production of tumor necrosis factor alpha (TNFα) and its receptor TNFR1, which can activate the nuclear factor kappa light-chain enhancer of activated B cells (NF-κB). The TNFα blockade abrogates this inflammatory response, although it presents immunologic risks. Thus, modulation of pathway subsets may be preferable. Here, we test whether inhibition of NF-κB activation using an NF-κB essential modulator binding domain (NBD) peptide mitigates CRT-induced neuroinflammation and improves behavioral outcomes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

DOE OSTI2020

Dynamic Focusing with High-Quality-Factor Metalenses

Metasurface lenses provide an ultrathin platform in which to focus light, but weak light–matter interactions limit their dynamic tunability. Here we design submicron-thick, ultrahigh quality factor (high-Q) metalenses that enable dynamic modulation of the focal length and intensity. Using full-field simulations, we show that quality factors exceeding 5000 can be generated by including subtle, periodic perturbations within the constituent Si nanoantennas. Such high-Q resonances enable lens modulation based on the nonlinear Kerr effect, with focal lengths varying from 4 to 6.5 μm and focal intensities decreasing by half as input intensity increases from 0.1 to 1 mW/μm 2 . We also show how multiple high-Q resonances can be embedded in the lens response through judicious placement of the perturbations. Our high-Q lens design, with quality factors 2 orders of magnitude higher than existing lens designs, provides a foundation for reconfigurable, multiplexed, and hyperspectral metasurface imaging platforms.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Copper Outdiffusion from Copper-Plated Solar Cell Contacts during Damp Heat Exposure

Plated copper (Cu) contacts for silicon (Si) solar cells are an attractive alternative material to conventional screenprinted silver, but there are unresolved questions on the long-term integrity of plated contact structures. Here, in this work, we perform characterization on plated Cu contacts from encapsulated cells that were degraded during extended exposure to damp heat (DH) stress. First, using energy-dispersive X-ray spectroscopy, we find evidence of Cu outdiffusion upward through capping layers made of both tin and silver applied with light-induced plating, resulting in a layer of Cu on the outer contact surface. We hypothesize that if Cu is mobile in the module, it may eventually find some route by which to enter the Si cells where it can degrade performance. Subsequently, in several types of Cu-plated, DH-degraded cells, secondary ion mass spectrometry detects elevated levels of Cu at the Si surface and in the Si cell bulk, which suggests that Cu can indeed migrate from contacts into Si over the course of DH stress.

14 SOLAR ENERGY↗

DOE OSTI2024

Photo-induced non-collinear interlayer RKKY coupling in bulk Rashba semiconductors

Abstract The interplay between light-matter, spin-orbit, and magnetic interactions allows the investigation of light-induced magnetic phenomena that are otherwise absent without irradiation. We present our analysis of light-driven effects on the interlayer exchange coupling mediated by a bulk Rashba semiconductor in a magnetic multilayer. The collinear magnetic exchange coupling mediated by the photon-dressed spin-orbit coupled electrons of BiTeI develops light-induced oscillation periods and displays new decay power laws, both of which are enhanced with an increasing light-matter coupling. For magnetic layers with non-collinear magnetization, we find a non-collinear magnetic exchange coupling uniquely generated by light-driving of the multilayer. As the non-collinear magnetic exchange coupling mediated by the photon-dressed electrons of BiTeI is unique to the irradiated system and it is enhanced with increasing light-matter coupling, this effect offers a promising platform of investigation of light-driven effects on magnetic phenomena in spin-orbit coupled systems. In this platform, light properties, such as its intensity, can serve as external knobs for inducing non-collinear couplings of the interlayer exchange and for modulating the collinear couplings. Both of these effects signify the photo-generated modification in the spin textures of spin-orbit coupled electrons in BiTeI.

Physics↗

DOE OSTI2022

Active Cancellation of Servo-Induced Noise on Stabilized Lasers via Feedforward

Many precision laser applications require active frequency stabilization. However, such stabilization loops operate by pushing noise to frequencies outside their bandwidth, leading to large “servo bumps” that can have deleterious effects for certain applications. The prevailing approach to filtering this noise is to pass the laser through a high-finesse optical cavity, which places constraints on the system design. Here, we propose and demonstrate a different approach where a frequency error signal is derived from a beat note between the laser and the light that passes through the reference cavity. The phase noise derived from this beat note is fed forward to an electro-optic modulator after the laser, carefully accounting for relative delay, for real-time frequency correction. With a hertz-line-width laser, we show ≳20 dB noise suppression at the peak of the servo bump (approximately 250 kHz) and a noise-suppression bandwidth of approximately 5 MHz—well beyond the servo bump. By simulating the Rabi dynamics of a two-level atom with our measured data, we demonstrate substantial improvements to the pulse fidelity over a wide range of Rabi frequencies. Here, our approach offers a simple and versatile method for obtaining a clean spectrum of a narrow-line-width laser, as required in many emerging applications of cold atoms, and is readily compatible with commercial systems that may even include wavelength conversion.

47 OTHER INSTRUMENTATION↗

DOE OSTI2020

FY20 SAM Code Developments and Validations for Transient Safety Analysis of Advanced non-LWRs

The System Analysis Module (SAM) is under development at Argonne National Laboratory as a modern system-level modeling and simulation tool for advanced non-light water reactor safety analyses. It utilizes the object-oriented application framework MOOSE to leverage the modern software environment and advanced numerical methods. The capabilities of SAM are being extended to enable the transient modeling, analysis, and design of various advanced nuclear reactor systems. This report summarizes major progress in SAM code development, capability enhancements, demonstration, and validation to support transient safety analysis of advanced non-LWRs. Rapid developments continued in fiscal year 2020 (FY20) to support various needs of the advanced reactor community, especially the NRC and industry on the licensing safety analysis of advanced reactor designs. Significant code changes were made to provide various capability enhancements, bug fixes, and user friendliness improvements. Major code updates are summarized in Section 1, while four important enhancements are detailed in Sections 2-5, including a multi-dimension flow model; reactivity feedback and decay heat models; control and trip system modeling, and additional fluid and solid thermophysical property models. Code validation activities in FY20 include using test data from the Fast Flux Test Facility (FFTF), the High Temperature Test Facility (HTTF), and several separate effects test facilities for pebble-bed modeling.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2021

SAM Code Enhancement, Validation, and Reference Model Development for Fluoride-salt-cooled High-temperature Reactors

22 GENERAL STUDIES OF NUCLEAR REACTORS↗