Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lasers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

X-Ray Free Electron Laser Interaction With Matter

X-ray free electron lasers (XFELs) will enable studying new areas of laser-matter interaction. We summarize the current understanding of the interaction of XFEL pulses with matter and describe some of the simulation approaches that are used to design experiments on future XFEL sources. Modified versions of these models have been successful in guiding and analyzing experiments performed at the extreme-ultraviolet FEL FLASH at wavelengths of 6 nm and longer. For photon energies of several keV, no XFEL-matter interaction experiments have been performed yet but data is anticipated to become available in the near future, which will allow to test our understanding of the interaction physics in this wavelength regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Momentum Transfer by Laser Ablation of Irregularly Shaped Space Debris

Proposals for ground-based laser remediation of space debris rely on the creation of appropriately directed ablation-driven impulses to either divert the fragment or drive it into an orbit with a perigee allowing atmospheric capture. For a spherical fragment, the ablation impulse is a function of the orbital parameters and the laser engagement angle. If, however, the target is irregularly shaped and arbitrarily oriented, new impulse effects come into play. Here we present an analysis of some of these effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Angular and energy distribution of Sn ion debris ejected from a laser-produced plasma source, for laser power densities in the range suitable for extreme ultraviolet lithography

In this paper, experimental results are presented for the spatial and energy distributions of charge-discriminated Sn ions ejected from laser-produced plasmas. The plasmas were formed on solid, planar Sn targets, irradiated with a Nd:YAG laser. Ions were investigated using a calibrated electrostatic sector analyzer, scanning an energy-to-charge ratio range of 0.22 to 2.2 keV/e for emission angles between 20 and 80 degrees relative to target normal. Results were obtained for three laser power densities, in the region suitable for inducing significant extreme ultraviolet emission, of the order 1.5-8.1 x 10{sup 11} W/cm{sup 2}. The fully differentiated data were found to be well characterized by Gaussian fits, which allowed trends in the emission profiles to be readily quantified. Ions of set energy and charge were observed to possess a preferential angle of emission, the superposition of which yields a physical basis for the total angular emission observed previously and in this work. The experimental results obtained have been related to physical processes within the plasma that influence the energy and angle of ejection of ions from laser produced plasmas.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Airbreathing Laser Propulsion Experiments with 1 {mu}m Terawatt Pharos III Laser: Part 1

This basic research study examines the physics of airbreathing laser propulsion at the extreme flux range of 1-2x10{sup 11} W/cm{sup 2}--within the air breakdown threshold for l {mu}m radiation--using the terawatt PHAROS III neodymium-glass pulsed laser. Six different experimental setups were tested using a 34 mm line focus with 66 {mu}m focal waist, positioned near the flat impulse surface. The first campaign investigated impulse generation with the beam oriented almost normal to the target surface, with energies ranging from 23 to 376 J, and pulses of 5 to 30 ns FWHM. Air breakdown/ plasma dynamics were diagnosed with GOI cameras and color photography. Laser generated impulse was quantified with both vertical pendulums and piezoelectric pressure transducers using the standard performance metric, C{sub M}--the momentum coupling coefficient. Part 1 of this 2-part paper covers Campaign no. 1 results including laser plasma diagnostics, pressure gage and vertical pendulum data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Diode-side-pumped laser heads for solid-state lasers

Principal configurations of diode-side-pumped laser heads for solid-state lasers are considered. A comparative analysis is performed for radiation characteristics of lasers with such laser heads. (review)

42 ENGINEERING↗

Demonstration of the Echo-Enabled Harmonic Generation Technique for Short-Wavelength Seeded Free Electron Lasers

We report the first experimental demonstration of the echo-enabled harmonic generation technique, which holds great promise for generation of high-power, fully coherent short-wavelength radiation. In this experiment, coherent radiation at the 3rd and 4th harmonics of the second seed laser is generated from the so-called beam echo effect. The experiment confirms the physics behind this technique and paves the way for applying the echo-enabled harmonic generation technique for seeded x-ray free electron lasers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of the Laser Scan Rate on the Microstructure, Magnetic Properties, and Microhardness of Selective Laser-Melted FeSiB

FeSiB alloys have been fabricated by selective laser melting (SLM) using a laser scan rate of 0.1–1.5 m/s, laser power of 90 W, scan line spacing of 40 μ m, and layer thickness of 50 μ m. X-ray diffraction, scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy, atomic force microscopy, profilometer, microdurometer, and vibrating sample magnetometer have been used to investigate the structural, microstructural, roughness, microhardness, and magnetic property changes during the laser melting process. The produced samples exhibit a nanocomposite structure consisting of nanocrystalline α-Fe{sub 0.95}Si{sub 0.05} and Fe{sub 2}B phases embedded into an amorphous ε-FeSi-type matrix. The selective laser-melted samples show high density, low surface roughness, higher microhardness values (1654–2273 Hv), and soft magnetic properties (M{sub s} = 188.6–199 emu/g and H{sub c} = 43.8–73 Oe).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Selective laser melting of Co-29Cr-6Mo alloy with laser power 180–360 W: Cellular growth, intercellular spacing and the related thermal condition

Highlights: • Increasing laser power increases the track size but not the track shape significantly. • Solidification mode and texture are similar over the range of laser power used. • Intercellular spacing is not affected by laser power but decreases slightly with growth angle. • Thermal gradient and cooling rate have been estimated to be ~ 2 × 10{sup 7} K/m and ~ 2 × 10{sup 6} K/s, respectively. - Abstract: A feature of solidification during selective laser melting (SLM) is cellular growth. Thus, how growth direction and cell size may be affected and possibly be controlled by SLM parameters are important to be understood. Furthermore, intercellular spacing (λ{sub 1}) is suggestive of the thermal condition during solidification which needs to be known for advancing the understanding of SLM. In this work, grain solidification orientation and λ{sub 1} of a Co-Cr-Mo alloy produced by SLM over a range of laser power (P = 180–360 W) with other parameters kept unchanged have been evaluated. It has been found that the overall preferred growth of cellular solidification is not significantly affected by P. This is because, over the range of P values used, the shape of track did not change sufficiently to result in a significant variation of growth direction during epitaxial growth. It has also been found that P does not affect λ{sub 1}. This suggests, since growth rate (R) relates to scan speed (v) which is unchanged, P does not significantly affect the temperature gradient of the solidification front (G). From the measured λ{sub 1} and estimated R, G and thus cooling rate ( T-dot ) can be estimated following the commonly used primary arm spacing model. The estimated G and T-dot which could not be directly measured will be compared with those predicted by simulation and the estimated T-dot will also be compared with those determined by using an emperical relationship from literature.

36 MATERIALS SCIENCE↗

Relationship between laser energy input, microstructures and magnetic properties of selective laser melted Fe-6.9%wt Si soft magnets

Highlights: • Effect of laser energy input on magnetic properties of SLM Fe-6.9%wt.Si is described; • Magnetic properties can be described as function of as-built microstructure after stress-relief post-treatment; • Samples with density >99% and strong crystallographic texture along BD have the best magnetic properties; • At very high laser energy, a strong cube texture forms that deteriorates the magnetic properties. - Abstract: Selective Laser Melting (SLM), a powder-bed Additive Manufacturing technology, can be used in combination with high temperature post-annealing to produce high-silicon steel parts characterised by quasi-static magnetic properties comparable to those of commercial electrical steel. However, the role of the as-built microstructure on the magnetic properties is still unexplored. Therefore, in this study the effect of the energy input of the processing laser on the magnetic properties of the material is investigated. The magnetic properties are determined for 4 mm-high rings obtained using three laser energy input values that provide a good compromise in terms of porosity and crack formation. The best magnetic properties are obtained for the rings built using a value of energy input that produces a strong fibrous crystallographic texture, in which one of the crystallographic <001> axes is preferentially aligned along the build direction. Whether the magnetic properties change with sample direction as a result of the crystallographic texture will be the subject of future research.

36 MATERIALS SCIENCE↗

Effect of laser power on oxygen and nitrogen concentration of commercially pure titanium manufactured by selective laser melting

Highlights: • The hardness and strength of pure titanium fabricated by SLM were increased with increasing the laser power. • During the SLM processing, the concentrations of oxygen and nitrogen in the SLM parts were increased. • The oxidation and nitriding were thermodynamically possible under SLM. - Abstract: This study analyzed the variation of mechanical properties and its causes with increasing the laser power in the fabrication of pure titanium by selective laser melting (SLM). SLM samples were fabricated using commercially pure titanium grade 1 powder when the scan speed was 1000 mm/s and the laser power as 120, 200, 280, 360, and 440 W, respectively. As the laser power increased, the hardness and strength of the samples increased gradually. During the SLM processing, the concentrations of oxygen and nitrogen in the SLM samples were increased, which resulted in the increase of hardness and strength. The SLM equipment used in this study removed oxygen in the chamber by flowing high purity argon gas and fabricates the sample while preserving the oxygen concentration in the atmosphere to 0.2%. Evaluating the possibility of oxidation and nitriding during the SLM process by thermodynamic analysis, it was found that the process occurred under conditions in which temperature and residual oxygen and nitrogen partial pressure led to oxidation and nitriding.

36 MATERIALS SCIENCE↗

Indication of Local Laser Pump Depletion via Transmitted Self-Guided Laser Light

In recent experiments it has been shown that an ultra-intense, ultra-short laser pulse can be self-guided over tens of Rayleigh lengths in an underdense plasma where {tau}(FWHM of the laser pulse) is on the order of the plasma wavelength ({lambda}{sub p}). Using an imaging spectrograph, the frequency of the transmitted laser pulse was spatially and spectrally resolved at the exit of 3, 5, and 8 mm long plasmas. The mechanism of laser pump depletion was studied by observing the amount that the transmitted laser pulse's spectrum was red shifted in wavelength through the interaction with the self-guiding plasma wave.

43 PARTICLE ACCELERATORS↗

Appearance of Density Cavitations in the Laser Wake in Simulations of High Intensity Laser-Plasma Interactions

Nonlinear interactions of high intensity, ultrashort laser pulses with underdense plasmas produce many interesting features that may appear in computer simulations. One of these features commonly observed in Particle-In-Cell (PIC) simulations is the spontaneous appearance of long-lived density cavitations in the plasma wake region behind the laser pulse. To study these cavitations, several small 2D PIC simulations are run in which plasma density, density ramps, total simulation time, laser pulsewidth, laser intensity, and laser polarization parameters have been varied. Based on the simulation results, some possible aspects of an experiment designed to directly detect these structures are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laser Resonance Ionization Spectroscopy of the Lanthanides Tb, Dy and Ho as Homologues to Actinides and Super Heavy Elements

Spectroscopic investigations of the rare earth elements Tb, Dy and Ho have been carried out using laser resonance ionization mass spectroscopy. A variety of new intermediate energy levels and autoionizing states were observed in these elements. Efficient and selective excitation and ionization schemes for the elements have been developed for Ti:Sapphire lasers using the spectroscopic data. Resonant ionization schemes for Np were also been studied as the preparation work for related investigations on actinide elements and for the spectroscopy on the heaviest elements, where spectroscopic data so far are scarce or not existing at all.

74 ATOMIC AND MOLECULAR PHYSICS↗

Evidence of inverse bremsstrahlung in laser enhanced laser-induced plasma

Plasmas created by a Nd:yttrium aluminum garnet laser show systematic changes in local electron temperature when bathed by a continuous wave laser of increasing irradiance. By monitoring the local electron density, the laser light absorption coefficient, and the signal to noise ratio in neutral emissions, we explain the changes in electron temperature and signal to noise to be a consequence of inverse bremsstrahlung in this new system of laser enhanced laser-induced plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Self-mode-transition from laser wakefield accelerator to plasma wakefield accelerator of laser-driven plasma-based electron acceleration

Via three-dimensional particle-in-cell simulations, the self-mode-transition of a laser-driven electron acceleration from laser wakefield to plasma-wakefield acceleration is studied. In laser wakefield accelerator (LWFA) mode, an intense laser pulse creates a large amplitude wakefield resulting in high-energy electrons. Along with the laser pulse depletion, the electron bunch accelerated in the LWFA mode drives a plasma wakefield. Then, after the plasma wakefield accelerator mode is established, electrons are trapped and accelerated in the plasma wakefield. The mode transition process and the characteristics of the accelerated electron beam are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

New laser setup for the selective isotope production and investigation in a laser ion source at the IRIS (Investigation of Radioactive Isotopes on Synchrocyclotron) facility

New laser installation for the resonance ionization spectroscopy in a laser ion source and for rare isotope production has been recently put into operation at the IRIS (Investigation of Radioactive Isotopes on Synchrocyclotron) facility (Petersburg Nuclear Physics Institute, Gatchina). This is a significant improvement of a previous target-laser ion source device of the IRIS mass-separator, working on-line with 1 GeV proton beam of PNPI (Petersburg Nuclear Physics Institute) synchrocyclotron. It makes possible for us to get the isobarically clean radioactive isotope beams of a great number of chemical elements. New laser setup provides the two- or three-resonance step ionization in the range of wavelength of 265-850 nm. The first results obtained at the laser setup for Tl isotopes are presented.

07 ISOTOPE AND RADIATION SOURCES↗

Dependence of terahertz power from laser-produced plasma on laser intensity

Power of terahertz radiation from plasma which is generated from air irradiated by coupled ({omega}, 2{omega}) femtosecond laser pulses is analyzed for high laser intensities, for which non-linear plasma effects on the pulse propagation become essential, with multidimensional particle-in-cell simulations including the self-consistent plasma kinetics. The growth rate of THz power becomes slower as the laser intensity increases. A reason of such a lowering of efficiency in THz emission is found to be ionization of air by the laser pulse, which results in poor focusing of laser pulses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tailoring the laser pulse shape to improve the quality of the self-injected electron beam in laser wakefield acceleration

In laser wakefield acceleration, tailoring the shape of the laser pulse is one way of influencing the laser-plasma interaction and, therefore, of improving the quality of the self-injected electron beam in the bubble regime. Using three-dimensional particle-in-cell simulations, the evolution dynamics of the laser pulse and the quality of the self-injected beam, for a Gaussian pulse, a positive skew pulse (i.e., one with sharp rise and slow fall), and a negative skew pulse (i.e., one with a slow rise and sharp fall) are studied. It is observed that with a negative skew laser pulse there is a substantial improvement in the emittance (by around a factor of two), and a modest improvement in the energy-spread, compared to Gaussian as well as positive skew pulses. However, the injected charge is less in the negative skew pulse compared to the other two. It is also found that there is an optimal propagation distance that gives the best beam quality; beyond this distance, though the energy increases, the beam quality deteriorates, but this deterioration is least for the negative skew pulse. Thus, the negative skew pulse gives an improvement in terms of beam quality (emittance and energy spread) over what one can get with a Gaussian or positive skew pulse. In part, this is because of the lesser injected charge, and the strong suppression of continuous injection for the negative skew pulse.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗