Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “krypton”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Experimental Developments for the Lamb-Shift Investigation in Heavy Ions

Results of the latest commissioning experiment of a two arm transmission crystal x-ray spectrometer in combination with a high-performance position-sensitive mircostrip germanium detector are presented. Due to the low photon efficiency of only 10{sup -8}, both the position-sensitivity and the energy-resolution of the 2D-germanium detector are absolutely essential to perform experiments using crystal x-ray spectrometers. In this experiment we were aiming for a precise determination of the Ly-{alpha} transitions in H-like Pb{sup 81+} produced in collisions with a krypton gas jet at the ESR storage ring. Up to now, the most accurate determination of QED corrections to the ground state binding energy in a high-Z, H-like system was performed for H-like uranium with an accuracy on the 1% level.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A Cargo Inspection System for Special Nuclear Material (SNM) Based on Associated Particle Neutron Generators and Liquid-Kr Detectors

A feasibility analysis is presented of a cargo inspection system based on neutron-induced fission followed by the coincident detection of multiple prompt fission gamma rays as a signature of Special Nuclear Material (SNM). The system does not require gamma ray spectroscopy and would be capable of distinguishing U-238 from U-235 using the ratio of signals from two modes of detection: thermal neutron capture induced fission and fast neutron-induced fission. The system utilizes two deuterium-tritium (DT) associated particle neutron generators, each capable of 10{sup 9} neutrons/s at 14.1 MeV, with sub-nanosecond timing resolution ZnO:Ga alpha detectors. The expected {approx}1 MeV prompt gamma rays are detected using liquid krypton (LKr) detectors with sub-nanosecond timing resolution ({approx}600 ps) and high detection efficiency. The expected SNM signal and randomly correlated background rates are discussed using Monte Carlo N-Particle (MCNP) code.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Hadron Formation in Semi-Inclusive DIS on Nuclei at HERMES

The influence of the nuclear environment on the hadronization of charged pions, kaons and (anti)protons in semi-inclusive deep inelastic scattering has been studied by the HERMES experiment at DESY using a 27.6 GeV positron beam. Identified hadron multiplicities have been measured for helium, neon, krypton and xenon relative to that of deuterium as a function of v, z and p{sub T}{sup 2}. A large increase in the multiplicity ratios with p{sub T}{sup 2} was observed, clarifying the role of FSI in the nuclear transverse momentum broadening. A clear effect of broadening from measurement of the difference in the width of the p{sub T}{sup 2} distribution for hadrons different types from heavy nuclei and deuterium been also obtained. This effect remains constant as a function of z, but vanishes as z goes to 1 due to energy conservation and increases as a function of Q{sup 2}. In addition, double-hadron production in the nuclear medium was investigated. Nuclear effects on the double hadron-production ratio provided an additional tool for studying modifications of hadronization in nuclear matter.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High-resolution spectroscopy for Doppler-broadening ion temperature measurements of implosions at the National Ignition Facility

Future implosion experiments at the national ignition facility (NIF) will endeavor to simultaneously measure electron and ion temperatures with temporal and spatial resolution in order to explore non-equilibrium temperature distributions and their relaxation toward equilibrium. In anticipation of these experiments, and with understanding of the constraints of the NIF facility environment, we have explored the use of Doppler broadening of mid-Z dopant emission lines, such as krypton He-{alpha} at 13 keV, as a diagnostic of time- and potentially space-resolved ion temperature. We have investigated a number of options analytically and with numerical raytracing, and we have identified several promising candidate spectrometer designs that meet the expected requirements of spectral and temporal resolution and data signal-to-noise ratio for gas-filled exploding pusher implosions, while providing maximum flexibility for use on a variety of experiments that potentially include burning plasma.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Non-contact measurement of partial gas pressure and distribution of elemental composition using energy-resolved neutron imaging

Neutron resonance absorption imaging is a non-destructive technique that can characterize the elemental composition of a sample by measuring nuclear resonances in the spectrum of a transmitted beam. Recent developments in pixelated time-of-flight imaging detectors coupled with pulsed neutron sources pose new opportunities for energy-resolved imaging. In this paper we demonstrate non-contact measurements of the partial pressure of xenon and krypton gases encapsulated in a steel pipe while simultaneously passing the neutron beam through high-Z materials. The configuration was chosen as a proof of principle demonstration of the potential to make non-destructive measurement of gas composition in nuclear fuel rods. The pressure measured from neutron transmission spectra (~739 ± 98 kPa and ~751 ± 154 kPa for two Xe resonances) is in relatively good agreement with the pressure value of ~758 ± 21 kPa measured by a pressure gauge. This type of imaging has been performed previously for solids with a spatial resolution of ~ 100 μm. In the present study it is demonstrated that the high penetration capability of epithermal neutrons enables quantitative mapping of gases encapsulate within high-Z materials such as steel, tungsten, urania and others. This technique may be beneficial for the non-destructive testing of bulk composition of objects (such as spent nuclear fuel assemblies and others) containing various elements opaque to other more conventional imaging techniques. As a result, the ability to image the gaseous substances concealed within solid materials also allows non-destructive leak testing of various containers and ultimately measurement of gas partial pressures with sub-mm spatial resolution.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Coarse spectral characterization of warm x-rays at the Z facility using a filtered thermoluminescent dosimeter array

A new collimated filtered thermoluminescent dosimeter (TLD) array has been developed at the Z facility to characterize warm x-rays (hν > 10 keV) produced by Z pinch radiation sources. This array includes a Kapton debris shield assembly to protect the TLDs from the source debris, a collimator array to limit the field of view of the TLDs to the source region, a filter wheel containing filters of aluminum, copper and tungsten up to 3 mm thick to independently filter each TLD, and a hermetically sealed cassette containing the TLDs as well as tungsten shielding on the sides and back of the array to minimize scattered radiation reaching the TLDs. Here experimental results from a krypton gas puff and silver wire array shot are analyzed using two different functional forms of the energy spectrum to demonstrate the ability of this diagnostic to consistently extend the upper end of the x-ray spectrum characterization from ~50 keV to >1 MeV.

47 OTHER INSTRUMENTATION↗

Investigation of magnetic flux transport and shock formation in a staged Z-pinch

Target preheating is an integral component of magnetized inertial fusion in reducing convergence ratio. In the staged Z-pinch concept, it is achieved via one or more shocks. Previous work [Narkis et al., Phys. Plasmas 23, 122706 (2016)] found that shock formation in the target occurred earlier in higher-Z liners due to faster flux transport to the target/liner interface. However, a corresponding increase in magnitude of magnetic pressure was not observed, and target implosion velocity (and therefore shock strength) remained unchanged. To investigate other means of increasing the magnitude of transported flux, a Korteweg-de Vries-Burgers equation from the 1-D single-fluid, resistive magnetohydrodynamic equations is obtained. Solutions to the nondispersive (i.e., Burgers) equation depend on nondimensional coefficients, whose dependence on liner density, temperature, etc., suggests an increase in target implosion velocity, and therefore shock strength, can be obtained by tailoring the mass of a single-liner gas puff to a double-liner configuration. In the selected test cases of 1-D simulated implosions of krypton on deuterium, the peak Mach number increased from ∼5 to ∼8. While a notable increase was seen, Mach numbers exceeding 10 (implosion velocities exceeding ∼25 cm/μs) are necessary for adequate shock preheating.

Narkis, J. (ORCID:0000000154368933)↗

Absolute Hugoniot measurements for CH foams in the 2–9 Mbar range

Absolute Hugoniot measurements for empty plastic foams at ∼10% of solid polystyrene density and supporting rad-hydro simulation results are reported. Planar foam slabs, ∼400 μm thick and ∼500 μm wide, some of which were covered with a 10 μm solid plastic ablator, were directly driven by 4 ns long Nike krypton-fluoride 248 nm wavelength laser pulses that produced strong shock waves in the foam. The shock and mass velocities in our experiments were up to 104 km/s and 84 km/s, respectively, and the shock pressures up to ∼9 Mbar. The motion of the shock and ablation fronts was recorded using side-on monochromatic x-ray imaging radiography. The steadiness of the observed shock and ablation fronts within ∼1% has been verified. The Hugoniot data inferred from our velocity measurements agree with the predictions of the SESAME and CALEOS equation-of-state models near the highest pressure ∼9 Mbar and density compression ratio ∼5. In the lower pressure range 2–5 Mbar, a lower shock density compression is observed than that predicted by the models. Possible causes for this discrepancy are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observations of the magneto-Rayleigh-Taylor instability and shock dynamics in gas-puff Z-pinch experiments

Here, we describe a series of experiments performed to study the shock structure generated during the implosion of a gas-puff Z-pinch. The Z-pinch is produced by a double-annular gas-puff with a center jet driven by Cornell University's COBRA generator operating with a 1 MA, 200 ns current pulse. Using 532 nm laser interferometry and 100 MHz multi-frame cameras, a shock structure is observed to form early in the implosion. The shock appears to be created by a current layer at the outer radius of the imploding plasma which acts as a piston moving inward at several hundred km s –1 . The dynamics of the shock and its radial position ahead of the piston agree well with a simple uniform density model outlined in the study by Potter [Nucl. Fusion 18(6), 813 (1978)]. The outer surface of the current layer is observed to be Magneto-Rayleigh-Taylor unstable. The growth rate of this instability is found to depend on the radial density profile of the material within the layer of high-density fluid between the shock and the piston, as predicted by recent theoretical work [see, e.g., D. Livescu, Phys. Fluids 16(1), 118 (2004)]. Growth rates measured in krypton implosions, where the post-shock material is found to decay quasi-exponentially away from the piston, were more than ten times smaller than those recorded in otherwise identical implosions in argon plasmas, where the material between the shock and the piston was observed to maintain a uniform density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hot filament performance in a Freeman ion source

Here, we report on the simulation results of the hot tungsten filament behavior in a Freeman ions source installed in the LANL electro-magnetic isotope separator (EMIS). The Freeman source enables us to ionize and extract high intensity single-charge ion beams from different gases as well as from various solid materials in order to purify the content of a selected isotope. We have modified our LANSCE H– Ion Source Filament Model to calculate the ion source working parameters during a beam production cycle and estimate the ion source filament lifetime. Two main mass erosion processes of the hot cathode in a Freeman ion source are included: thermal evaporation and plasma sputtering. The initial working temperature of the ion source filament was estimated to be in range of 2400 to 2500 K. The filament model shows that the plasma sputtering rate is several magnitude of order higher than the thermal evaporation rate. The results of ion source modeling were compared with recorded data during the EMIS beam production runs using krypton noble gas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Order-of-magnitude laser imprint reduction using pre-expanded high-Z coatings on targets driven by a third harmonic Nd:glass laser

A hybrid early time x-ray drive followed by conventional laser direct drive obtained by utilizing a thin high-Z overcoat on plastic ablator targets has proven to be very effective at reducing laser imprint in experiments driven by the Nike krypton-fluoride laser. An inherent low level laser prepulse from that laser system heated and expanded the coating prior to the main pulse. Here, we report on results using a frequency tripled Nd:glass laser system (Omega EP) where the inherent prepulse was several orders of magnitude smaller. By applying a separate prepulse, these experiments allowed us to test if the prepulse is important for mitigating imprint with the high-Z layer. The results show that the high-Z coating is much more effective at reducing laser imprint when it is pre-expanded, in this case, by an externally generated low level soft x-ray prepulse of ∼10 J/cm2. With the x-ray prepulse, laser imprint at spatial wavelengths below 100 μm was reduced by an order of magnitude, similar to that observed with the laser prepulse on Nike. Furthermore, the experiments here establish that high-Z coating is effective in reducing imprint even in the case of a fixed speckle pattern. Rayleigh–Taylor-amplified laser imprint and high-Z layer dynamics were measured using through-foil and side-on x-ray radiography. Pre-expansion times from 30 down to 6 ns were effective, potentially compatible with laser prepulse generation using existing NIF and OMEGA front ends; however, temporal beam smoothing appears to be necessary for the laser prepulse that directly illuminates the high-Z coating. The highest imprint reduction is observed for Pd and Au coatings of at least 400 Å thickness; thicknesses down to 200 Å show a reduction in imprint with an adjusted prepulse.

Karasik, Max (ORCID:0000000162354670)↗

The importance of laser wavelength for driving inertial confinement fusion targets. II. Target design

We describe details of radiation-hydrodynamics simulations of directly driven targets for inertial confinement fusion using laser drivers with different laser wavelengths. Of particular interest here are comparisons of frequency-tripled glass (laser wavelength 351 nm) lasers with the argon fluoride (193 nm) and krypton fluoride (248 nm) excimer lasers and the effects that these laser wavelengths have on the target designs. We explore the effect these drivers have on the compromise involved between lowering laser plasma instabilities (LPIs) or hydrodynamic instabilities while providing high gains and seek to quantify this trade-off. Short-wavelength drivers have significant advantages, primarily in using less power and energy to drive targets. Additionally, they expand the allowed operating regime that is constrained by LPI avoidance and the production of higher pressures needed for more hydrodynamically stable targets. Potential disadvantages to shorter drive wavelengths, such as increased imprint, are examined and found to be unimportant.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multiplexed structured imaging of laser induced fluorescence at 10 GHz rate

The frame rate of conventional high-speed imaging devices is limited by exposure time and signal read-out time. Structured imaging is able to push the frame rate beyond the limit of the imaging device. This work demonstrates the feasibility of potential TeraHz rate structured imaging with a multiplexed structured imaging setup. In this work, a multiplexed structured image capture system was employed to image UV laser induced krypton-II emission lines at 10 GHz. The measured emission intensity of the 764 nm line over time suggests a temporal resolution of 97 ps. The temporal resolution is adjustable, and the frame rate can be further increased to the TeraHz level.

47 OTHER INSTRUMENTATION↗

Quantifying fission yields at the National Ignition Facility using depleted uranium foil experiments

There are programs for high-Z shell experiments at the National Ignition Facility (NIF). For shells made of actinide material, a quantitative fission diagnostic is needed in order to determine how much fission took place and whether the fission was sufficient to produce a non-negligible heat source in the burning capsule. Here, we present a viable coupled experimental and theoretical technique for making quantitative fission measurements possible. The proposed scheme involves using a well-characterized set of depleted uranium foils outside an NIF capsule to verify the conversion of xenon and krypton fission fragments collected at the Radiochemical Analysis of Gaseous Samples (RAGS) facility into total fission yield. We present the calculations needed for this conversion, including the decays in and out of fission fragment chains during the RAGS pump-down of the NIF chamber.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurements of the electron energy distribution function in partially magnetized low temperature plasmas

While Langmuir probes (LPs) are relatively simple and inexpensive plasma diagnostics for the electron density, temperature, and the electron energy distribution function (EEDF), the interpretation of the measured current–voltage (I–V) characteristic is complicated considerably by the presence of a magnetic field. In regimes where the electron gyroradius is comparable to the probe radius, the electron flux to the probe surface is retarded by reduced mobility across field lines and can no longer be described by a thermal model. Predicting the current collected by the probe in these regimes requires accurate estimates of the plasma diffusion coefficients, which are usually difficult to obtain. In this work, we measure electron energy distribution functions in E×B plasmas with magnetized electrons and non-magnetized ions in argon and krypton gases, using both a LP and laser Thomson scattering (LTS) at various magnetic fields. Using the LTS measurements to provide a robust benchmark for comparison, we compare existing theories describing the flux to the probe under magnetized conditions. We find that even when the electron gyroradius associated with the effective electron temperature is small compared to the probe radius, the EEDF computed using classical probe theory is still robust at energies higher than the energy at which the gyroradius becomes larger than the probe size. For plasmas that are not strongly non-Maxwellian, we formulate a method to extract robust density and temperature measurements using physics-informed fitting techniques to analyze EEDFs computed using classical theory.

Devin, E. G. [Princeton Plasma Physics Laboratory ↗

Planar multifrequency mid-IR microwave-pumped lasers

The characteristics of planar repetitively pulsed diffusion-cooled HF, DF, HF – DF, Xe, and HF – DF – Xe(Kr) lasers pumped by a microwave discharge (2.45 GHz) are studied depending on the pump pulse duration (10 – 40 μs) and repletion rate (50 – 400 Hz), as well as on the composition and pressure of the working gas mixture (30 – 200 Torr) at low (to 0.6 L s{sup −1}) gas flow rates. It is demonstrated for the first time that a HF – DF – Xe gas-discharge laser may simultaneously operate as a HF – DF chemical molecular laser and a recombination laser based on xenon atom transitions and generate broadband (octave) radiation in the range 2.0 – 4.2 μm with an average output power of 43 mW and an efficiency of 0.9 %. With substitution of xenon for krypton, lasing in a HF – DF – Kr laser is obtained at wavelengths of 2.52 – 4.15 μm. Lasing in a HF – DF laser was achieved simultaneously in two spectral regions (2.7 – 2.9 and 3.6 – 4.2 μm) with an output power of ∼50 mW. It is found that a decrease in the pump pulse duration with a simultaneous increase in the pulse repletion rate for retaining the average energy deposition leads to an increase in the average output power and efficiency of the laser. At low pulse repetition rates (50 – 100 Hz) and a low gas mixture flow rate, helium buffer gas can be effectively substituted for neon. Operation of the Xe laser was achieved in the spectral range 2.03 – 3.65 μm with an average output power of 580 Mw at a pump pulse duration of 20 μs, a pulse repetition rate to 10 kHz, and a maximum efficiency of 55 %. The obtained experimental results demonstrate the possibility of creating broadband HF – DF – Xe lasers emitting in the frequency range 2 – 4 μm with a desired ratio of intensities in different spectral ranges. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of Surfactants on Noble Metal Liquid-Gas Interface Mass Transfer in Molten Salt Reactors

Noble metals, a group of insoluble fission products (FPs), can accumulate in molten salt reactors (MSRs) and influence system performance and safety through deposition. Upon generation in fission, noble metals are transported by circulating salt and may either deposit on structural surfaces or enter the circulating gas bubble interfaces. While sparging was primarily designed for xenon and krypton removal, the mass transfer of noble metals into bubble interfaces highlights a potential pathway for their transport and partial extraction. The properties of the liquid-gas interface therefore play an important role in noble metal deposition and removal behaviors. Observations from earlier studies suggest that noble metals accumulated at the bubble interface can act as surfactants, making the bubble interface partially immobile. This behavior reduces the mass transfer capacity of circulating bubbles and affects both the overall distribution of noble metals in the loop and their removal efficiency. To investigate the influence of surfactants on noble metal transport, deposition, and extraction behaviors in MSRs, a previously developed and validated species transport model incorporating noble metal interphase mass transfer was used to simulate these behaviors. Two designed cases were studied to predict the distribution of 132Te along the Molten Salt Reactor Experiment (MSRE) loop under different bubble interface conditions. The results show that the mass transfer coefficients at the liquid-gas interface, determined by bubble interface characteristics, significantly influence noble metal distribution within the reactor loop. These findings emphasize the importance of continuously introducing fresh circulating bubbles into the molten salt to improve the removal efficiency of insoluble FPs from the MSR primary loop.

MSR↗